Skip to content

spec get device user id

Ken Sharp edited this page Dec 10, 2025 · 2 revisions

Get Device User ID

Get the user specified identification number from the LINX device.

LabVIEW

Developer Note

N/A

Command Packet

Get Device User ID
Description Get the user specified identification number from the LINX device.
Size 7 Bytes
Format 0 1 2 3 4 5 6
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x07 PACKET NUM CMD : 0x0013 CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Packet Size In Bytes
PACKET NUM The Current Packet Number. This value increments with each new packet or repeats for a multi packet command.
CMD Get Device User ID Command.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

LINX Target

Developer Note

N/A

Response Packet

Get Device User ID Response
Description LINX device's response to the Gett Device User ID Command
Size 8 Bytes
Format 0 1 2 3 4 5 6 7
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x08 PACKET NUM STATUS ID CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Total packet size in bytes.
PACKET NUM The packet number of the packet that generated the response.
STATUS See Return Status section below.
ID The user specified identification number from the LINX device
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

Return Status

No function specific statuses. See Return Status for universal return statuses.

Related Links

LINX

Clone this wiki locally