Repository navigation
Aurora wip4 rev 6: carry upstream #186 (route DP-alt ports only after HPD) + local DPTX fallback (build-only) - #619
Conversation
…xt, plus the 2026-10-22 evidence First wip3 dock plug of a boot routed to dcpext1 (28cc00000), whose DPTX RemotePort never answered validate (six timeouts); the release timed out too, so the port stayed pinned to it and replugging the same port failed until another port was used. Local patch 0002: a DCP whose DPTX call times out is passed over for 300 s, and a timed-out release is completed instead of kept owned. series.json revision 5 (7.2.11-elementary-aurora72-wip4), review receipt, test updates, evidence note, README and handoff entries. Build-only: the patch applies on the pinned files and the routing change ran in userspace; kernel build, KUnit and any boot are not done. Does not move a tunnel already attached to the silent pipeline within the same plug. wip3 stays installed; nothing staged or armed. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…after HPD) with local 0002
|
Note 🤖 Claude Opus 5.5 (Claude Code triage) responding on behalf of techmore Recommendation: rebase (mechanical), then land before #533 or decide the order with it. Only 3 commits behind
Next step: rebase onto |
|
Native kernel build passed: CI run 40498010695, job ARM64 unified72 build and payload inspection (39m20s), all 18 checks green. Docs and receipt updated (1dfb6ec). Still not done: KUnit, any boot, hot-plugging a dock with this series (upstream's #186 report didn't either). Artifacts (293/297 MB) were not downloaded or audited. Stays a draft: booting it is the owner's decision, and the owner-run boot trial is the only real test of the post-resume dock failure on 28cc00000. |
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Supersedes #518 (this branch carries its commit, rebased onto current dev) and adds upstream omacom/linux-aurora #186.
Why
Dock HDMI fails on wip3 when the dock is first plugged in right after resuming from s2idle:
apple-dcp 28cc00000times out the DPTX validate call six times (-110), then the same dock works on289c00000after a port change. Across retained journals (Oct 20-27): no DPTX failures on .20 or wip2 (wip2 used 28cc00000 fine) or on a wip3 boot with the dock plugged at boot; all three failing boots were wip3 with the first plug within ~4 s of resume. Consistent with, not proof of, a post-resume DCP state problem.Series (revision 6,
7.2.11-elementary-aurora72-wip4)Checked
candidate.py prepare --profile unified72: all five patches apply to the full pinned Simplify Orchard panel to icon and running-instance count #158 source (exit 0)candidate.py check: passes; 83 aurora tests pass (series test updated deliberately)Not done
Kernel build/KUnit (CI), any boot, hot-plugging a dock (upstream's test report did not either). 0002 and 0003/0004 both edit dcp-fabric.c; they apply in order but their semantic interaction is unreviewed. Nothing installed, staged, armed or rebooted; wip3 stays the running kernel.
Receipt: mseries/aurora/unified72/review-wip4-2026-10-27.json