Skip to content

QCLINUX: arm64: dts: qcom: Add IMX577 DTSI changes to Support CAM1 #1491

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
mvadlama-lab wants to merge 1 commit into
base: tech/overlay/dt
Choose a base branch
from
+78 −0
Open

QCLINUX: arm64: dts: qcom: Add IMX577 DTSI changes to Support CAM1 #1491

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
78 changes: 78 additions & 0 deletions arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-camera-sensor.dtsi
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -175,6 +175,84 @@
status = "ok";
};

eeprom_cam1: qcom,eeprom1 {
cell-index = <12>;
compatible = "qcom,eeprom";
cam_vio-supply = <&vreg_l18b_1p8>;
regulator-names = "cam_vio";
power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
rgltr-cntrl-support;
pwm-switch;
rgltr-min-voltage = <1800000>;
rgltr-max-voltage = <1800000>;
rgltr-load-current = <120000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 65 0>,
<&tlmm 21 0>,
<&pm7250b_gpios 3 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1",
"CAM_CUSTOM1";
sensor-position = <1>;
sensor-mode = <0>;
cci-master = <1>;
status = "ok";
clocks = <&camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};

/*cam1-imx577*/
qcom,cam-sensor12 {
cell-index = <12>;
compatible = "qcom,cam-sensor";
csiphy-sd-index = <1>;
eeprom-src = <&eeprom_cam1>;
sensor-position-roll = <0>;
sensor-position-pitch = <0>;
sensor-position-yaw = <180>;
cam_vio-supply = <&vreg_l18b_1p8>;
regulator-names = "cam_vio";
power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
rgltr-cntrl-support;
pwm-switch;
rgltr-min-voltage = <1800000>;
rgltr-max-voltage = <1800000>;
rgltr-load-current = <120000>;
gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active
&cam_sensor_active_rst1>;
pinctrl-1 = <&cam_sensor_mclk1_suspend
&cam_sensor_suspend_rst1>;
gpios = <&tlmm 65 0>,
<&tlmm 21 0>,
<&pm7250b_gpios 3 0>;
gpio-reset = <1>;
gpio-custom1 = <2>;
gpio-req-tbl-num = <0 1 2>;
gpio-req-tbl-flags = <1 0 0>;
gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1",
"CAM_CUSTOM1";
sensor-mode = <0>;
cci-master = <1>;
status = "ok";
clocks = <&camcc CAM_CC_MCLK1_CLK>;
clock-names = "cam_clk";
clock-cntl-level = "nominal";
clock-rates = <24000000>;
};
};

&cam_cci1 {
Expand Down