Skip to content

Commit 7f93424

Browse files
author
Tang ZZ
committed
docs(dragon-q8b): revise EDL entry sequence
1 parent aeee483 commit 7f93424

7 files changed

Lines changed: 18 additions & 17 deletions

File tree

‎docs/dragon/q8b/getting-started/install-system/usb-system/edl-mode.md‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -4,16 +4,16 @@ sidebar_position: 1
44

55
# 进入 EDL 模式
66

7-
主板上电前，按住 EDL 按键；主板上电后，松开 EDL 按键，进入 EDL 模式。
7+
按以下步骤操作，使主板进入 EDL 模式。
88

99
<div style={{textAlign: 'center'}}>
1010
<img src="/img/dragon/q8b/dragon-q8b-enter-edl-mode.webp" style={{width: '100%', maxWidth: '1200px'}} />
1111
</div>
1212

1313
① : 按住主板上的 `EDL` 按键
1414

15-
② : 连接 20V Type-C 电源适配器（兼容 PD 协议）
15+
② : 使用 USB Type-C 数据线连接 Dragon Q8B 的 USB-C 接口和电脑的 USB 接口（正常情况下绿灯常亮）
1616

1717
③ : 松开主板上的 `EDL` 按键
1818

19-
④ : 使用 USB Type-C 数据线连接 Dragon Q8B 的 USB-C 接口和电脑的 USB 接口
19+
④ : 连接 20V Type-C 电源适配器（兼容 PD 协议）

‎docs/dragon/q8b/hardware-use/edl.md‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -8,13 +8,13 @@ sidebar_position: 16
88

99
## 使用指南
1010

11-
主板上电的过程中检测到 EDL 按键被按下，主板将进入 EDL 模式。
11+
按照以下步骤操作，主板将进入 EDL 模式。
1212

1313
详细步骤：
1414

1515
1. 按住 EDL 按键
16-
2. 连接 20V Type-C 电源适配器（兼容 PD 协议）
16+
2. 使用 USB Type-C 数据线连接 Dragon Q8B 的 USB-C 接口和电脑的 USB 接口（正常情况下绿灯常亮）
1717
3. 松开 EDL 按键
18+
4. 连接 20V Type-C 电源适配器（兼容 PD 协议）
1819

1920
正常情况下，主板会进入 EDL 模式。
20-

‎docs/dragon/q8b/low-level-dev/edl-mode.md‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -8,19 +8,19 @@ sidebar_position: 4
88

99
## 进入 EDL 模式
1010

11-
主板上电前，按住 EDL 按键；主板上电后，松开 EDL 按键，进入 EDL 模式。
11+
按以下步骤操作，使主板进入 EDL 模式。
1212

1313
<div style={{textAlign: 'center'}}>
1414
<img src="/img/dragon/q8b/dragon-q8b-enter-edl-mode.webp" style={{width: '100%', maxWidth: '1200px'}} />
1515
</div>
1616

1717
① ： 按住 EDL 按键
1818

19-
② ： 连接 20V Type-C 电源适配器（兼容 PD 协议）
19+
② ： 使用 USB Type-C 数据线连接 Dragon Q8B 的 USB-C 接口和电脑的 USB 接口（正常情况下绿灯常亮）
2020

2121
③ ： 松开 EDL 按键
2222

23-
④ ： 使用 USB Type-C 数据线连接 Dragon Q8B 的 USB-C 接口和电脑的 USB 接口
23+
④ ： 连接 20V Type-C 电源适配器（兼容 PD 协议）
2424

2525
## 验证 EDL 模式
2626

‎i18n/en/docusaurus-plugin-content-docs/current/dragon/q8b/getting-started/install-system/usb-system/edl-mode.md‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -4,16 +4,16 @@ sidebar_position: 1
44

55
# Entering EDL Mode
66

7-
Before powering on the board, hold the EDL button. After powering on the board, release the EDL button to enter EDL mode.
7+
Follow the steps below to enter EDL mode.
88

99
<div style={{textAlign: 'center'}}>
1010
<img src="/en/img/dragon/q8b/dragon-q8b-enter-edl-mode.webp" style={{width: '100%', maxWidth: '1200px'}} />
1111
</div>
1212

1313
1. Hold the `EDL` button on the board
1414

15-
2. Connect a 20V Type-C power adapter (PD compatible)
15+
2. Connect the Dragon Q8B USB-C port to a computer USB port using a USB Type-C cable (the green LED normally stays on)
1616

1717
3. Release the `EDL` button on the board
1818

19-
4. Connect the Dragon Q8B USB-C port to a computer USB port using a USB Type-C cable
19+
4. Connect a 20V Type-C power adapter (PD compatible)

‎i18n/en/docusaurus-plugin-content-docs/current/dragon/q8b/hardware-use/edl.md‎

Lines changed: 3 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -8,12 +8,13 @@ The Radxa Dragon Q8B has an onboard EDL button for entering EDL mode. EDL mode i
88

99
## User Guide
1010

11-
If the EDL button is detected as pressed while the motherboard is powering on, the motherboard will enter EDL mode.
11+
Follow the steps below to put the board into EDL mode.
1212

1313
Detailed steps:
1414

1515
1. Press and hold the EDL button
16-
2. Connect a 20V Type-C power adapter compatible with the PD protocol
16+
2. Connect the Dragon Q8B USB-C port to a computer USB port using a USB Type-C cable (the green LED normally stays on)
1717
3. Release the EDL button
18+
4. Connect a 20V Type-C power adapter compatible with the PD protocol
1819

1920
Normally, the motherboard will enter EDL mode.

‎i18n/en/docusaurus-plugin-content-docs/current/dragon/q8b/low-level-dev/edl-mode.md‎

Lines changed: 3 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -8,19 +8,19 @@ Qualcomm EDL (Qualcomm Download Mode) is an emergency download mode for Qualcomm
88

99
## Entering EDL Mode
1010

11-
Before powering on the board, hold the EDL button. After powering on the board, release the EDL button to enter EDL mode.
11+
Follow the steps below to enter EDL mode.
1212

1313
<div style={{textAlign: 'center'}}>
1414
<img src="/en/img/dragon/q8b/dragon-q8b-enter-edl-mode.webp" style={{width: '100%', maxWidth: '1200px'}} />
1515
</div>
1616

1717
1. Hold the EDL button
1818

19-
2. Connect a 20V Type-C power adapter (PD compatible)
19+
2. Connect the Dragon Q8B USB-C port to a computer USB port using a USB Type-C cable (the green LED normally stays on)
2020

2121
3. Release the EDL button
2222

23-
4. Connect the Dragon Q8B USB-C port to a computer USB port using a USB Type-C cable
23+
4. Connect a 20V Type-C power adapter (PD compatible)
2424

2525
## Verify EDL Mode
2626

‎static/img/dragon/q8b/dragon-q8b-enter-edl-mode.webp‎

44.8 KB
Loading

0 commit comments

Comments
 (0)