diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-camera-sensor.dtsi b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-camera-sensor.dtsi
index 026b97b58377..ac65832e567f 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-camera-sensor.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-camera-sensor.dtsi
@@ -175,6 +175,84 @@
 		status = "ok";
 	};
 
+	eeprom_cam1: qcom,eeprom1 {
+		cell-index = <12>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&vreg_l18b_1p8>;
+		regulator-names = "cam_vio";
+		power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_active_rst1>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_suspend_rst1>;
+		gpios = <&tlmm 65 0>,
+			<&tlmm 21 0>,
+			<&pm7250b_gpios 3 0>;
+		gpio-reset = <1>;
+		gpio-custom1 = <2>;
+		gpio-req-tbl-num = <0 1 2>;
+		gpio-req-tbl-flags = <1 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1",
+					"CAM_CUSTOM1";
+		sensor-position = <1>;
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "nominal";
+		clock-rates = <24000000>;
+	};
+
+	/*cam1-imx577*/
+	qcom,cam-sensor12 {
+		cell-index = <12>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		eeprom-src = <&eeprom_cam1>;
+		sensor-position-roll = <0>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		cam_vio-supply = <&vreg_l18b_1p8>;
+		regulator-names = "cam_vio";
+		power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_active_rst1>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_suspend_rst1>;
+		gpios = <&tlmm 65 0>,
+			<&tlmm 21 0>,
+			<&pm7250b_gpios 3 0>;
+		gpio-reset = <1>;
+		gpio-custom1 = <2>;
+		gpio-req-tbl-num = <0 1 2>;
+		gpio-req-tbl-flags = <1 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1",
+					"CAM_CUSTOM1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "nominal";
+		clock-rates = <24000000>;
+	};
 };
 
 &cam_cci1 {