diff --git a/doc/input-output-reference/src/overview/group-zone-controls-thermostats.tex b/doc/input-output-reference/src/overview/group-zone-controls-thermostats.tex index b32dbdf2ee6..2bdcc007bf7 100644 --- a/doc/input-output-reference/src/overview/group-zone-controls-thermostats.tex +++ b/doc/input-output-reference/src/overview/group-zone-controls-thermostats.tex @@ -58,6 +58,10 @@ \subsubsection{Inputs}\label{inputs-054} Each non-zero control type which is used in this schedule must appear in the following fields which list the specific thermostat control objects to be used for this zone. +\paragraph{Field: Temperature Difference Between Cutout And Setpoint}\label{field-temperature-difference-between-cutout-and-Setpoint} + +This optional choice field provides a temperature difference between cutout temperature and setpoint. When the temperature difference is greater than 0.0, the difference is applied to both heating and cooling by possibly revising setpoints based on control types. + \paragraph{Field Set (Control Object Type, Control Name)}\label{field-set-control-object-type-control-name} Up to four pairs of Control Object Type and Control Name may be listed to specify which control objects are used for this zone. This list is not order-dependent, and the position in this list has no impact on the control type schedule. In the control type schedule, a value of 1 always means ``Single Heating Setpoint'', even if that control type is not first in this list. @@ -78,10 +82,6 @@ \subsubsection{Inputs}\label{inputs-054} The corresponding control type name. The name is used in an object with the name of the control type and specifies the schedule. -\paragraph{Field: Temperature Difference Between Cutout And Setpoint}\label{field-temperature-difference-between-cutout-and-Setpoint} - -This optional choice field provides a temperature difference between cutout temperature and setpoint. When the temperature difference is greater than 0.0, the difference is applied to both heating and cooling by possibly revising setpoints based on control types. - If MAT is defined as zone air temperature at previous time step, DeltaT represents the temperature difference between cutout and setpoint and is greater than 0.0, and PredictedLoad represents predicted load calculated in the ZoneTempPredictorCorrector, following action will be taken: \begin{lstlisting} @@ -130,7 +130,7 @@ \subsubsection{Inputs}\label{inputs-054} \begin{lstlisting} ZoneControl:Thermostat, Zone 3 Thermostat, NORTH ZONE, - Zone Control Type Sched, + Zone Control Type Sched, 0.0, DUAL SETPOINT WITH DEADBAND, VAV Setpoints; \end{lstlisting} @@ -140,14 +140,15 @@ \subsubsection{Inputs}\label{inputs-054} ZoneList,AllControlledZones,SPACE1-1,SPACE2-1,SPACE3-1,SPACE4-1,SPACE5-1; ZoneControl:Thermostat, AllControlledZones Thermostat, !- Name - AllControlledZones, !- Zone Name - Zone Control Type Sched, !- Control Type Schedule Name + AllControlledZones, !- Zone Name + Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:SingleCooling, !- Control 1 Object Type - CoolingSetPoint, !- Control 1 Name + CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type - HeatingSetpoint, !- Control 2 Name + HeatingSetpoint, !- Control 2 Name ThermostatSetpoint:DualSetpoint, !- Control 3 Object Type - DualSetPoint; !- Control 3 Name + DualSetPoint; !- Control 3 Name \end{lstlisting} A complete zone thermostat example showing this statement and all of the objects it must reference is: @@ -156,8 +157,9 @@ \subsubsection{Inputs}\label{inputs-054} ! Zone control object which links thermostats to a particular zone ZoneControl:Thermostat, Zone 2 Thermostat, EAST ZONE, Zone Control Type Sched, + , ThermostatSetpoint:SingleCooling, Cooling Setpoint with SB, - ThermostatSetpoint:SingleHeating; Heating Setpoint with SB; + ThermostatSetpoint:SingleHeating, Heating Setpoint with SB; ! Control type objects these may be used in more than one zone ThermostatSetpoint:SingleCooling, @@ -544,6 +546,7 @@ \subsubsection{Inputs}\label{inputs-5-034} AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -568,6 +571,7 @@ \subsubsection{Inputs}\label{inputs-5-034} AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/idd/Energy+.idd.in b/idd/Energy+.idd.in index 27a5422391d..ebecae838e5 100644 --- a/idd/Energy+.idd.in +++ b/idd/Energy+.idd.in @@ -36837,6 +36837,13 @@ ZoneControl:Thermostat, \required-field \type object-list \object-list ScheduleNames + N1 , \field Temperature Difference Between Cutout And Setpoint + \note This optional choice field provides a temperature difference between cut-out temperature and + \note setpoint. The difference is used to adjust to heating or cooling setpoint based on control types. + \units deltaC + \type real + \minimum 0.0 + \default 0.0 A4 , \field Control 1 Object Type \required-field \type choice @@ -36878,18 +36885,11 @@ ZoneControl:Thermostat, \key ThermostatSetpoint:SingleCooling \key ThermostatSetpoint:SingleHeatingOrCooling \key ThermostatSetpoint:DualSetpoint - A11, \field Control 4 Name + A11; \field Control 4 Name \note Control names are names of individual control objects (e.g. ThermostatSetpoint:SingleHeating) \note Schedule values in these objects list actual setpoint temperatures for the control types \type object-list \object-list ControlTypeNames - N1 ; \field Temperature Difference Between Cutout And Setpoint - \note This optional choice field provides a temperature difference between cut-out temperature and - \note setpoint. The difference is used to adjust to heating or cooling setpoint based on control types. - \units deltaC - \type real - \minimum 0.0 - \default 0.0 ZoneControl:Thermostat:OperativeTemperature, \memo This object can be used with the ZoneList option on a thermostat or with one diff --git a/performance_tests/15zonePSZ.idf b/performance_tests/15zonePSZ.idf index e63902f522a..1f012f44ec9 100644 --- a/performance_tests/15zonePSZ.idf +++ b/performance_tests/15zonePSZ.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2380,6 +2381,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2790,6 +2792,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -3200,6 +3203,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3610,6 +3614,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -4020,6 +4025,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -4430,6 +4436,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -4840,6 +4847,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -5250,6 +5258,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -5660,6 +5669,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -6070,6 +6080,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -6480,6 +6491,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -6869,6 +6881,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -7224,6 +7237,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -7613,6 +7627,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/15zonePTAC.idf b/performance_tests/15zonePTAC.idf index 999c8a90422..42700fbc7f6 100644 --- a/performance_tests/15zonePTAC.idf +++ b/performance_tests/15zonePTAC.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2490,6 +2491,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3010,6 +3012,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -3530,6 +3533,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4050,6 +4054,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -4570,6 +4575,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -5090,6 +5096,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -5610,6 +5617,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -6130,6 +6138,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -6650,6 +6659,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -7170,6 +7180,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -7690,6 +7701,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -8189,6 +8201,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -8654,6 +8667,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -9153,6 +9167,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/15zonePVAV.idf b/performance_tests/15zonePVAV.idf index 8acc713b41c..aff4cd167c9 100644 --- a/performance_tests/15zonePVAV.idf +++ b/performance_tests/15zonePVAV.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -7049,6 +7061,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -7419,6 +7432,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -7823,6 +7837,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/15zonevav.idf b/performance_tests/15zonevav.idf index 4868aaf2ac9..53880aebdc9 100644 --- a/performance_tests/15zonevav.idf +++ b/performance_tests/15zonevav.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -7049,6 +7061,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -7419,6 +7432,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -7823,6 +7837,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/15zonevav_no_reports.idf b/performance_tests/15zonevav_no_reports.idf index 5e3f3a06e84..d9100f0a43c 100644 --- a/performance_tests/15zonevav_no_reports.idf +++ b/performance_tests/15zonevav_no_reports.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -7049,6 +7061,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -7419,6 +7432,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -7823,6 +7837,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/30zonePSZ.idf b/performance_tests/30zonePSZ.idf index a300e8b1771..907f541e3b5 100644 --- a/performance_tests/30zonePSZ.idf +++ b/performance_tests/30zonePSZ.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2380,6 +2381,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2790,6 +2792,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3200,6 +3203,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -3610,6 +3614,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4020,6 +4025,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -4430,6 +4436,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4840,6 +4847,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -5250,6 +5258,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -5660,6 +5669,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -6070,6 +6080,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -6480,6 +6491,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -6890,6 +6902,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -7300,6 +7313,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -7710,6 +7724,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -8120,6 +8135,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -8530,6 +8546,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -8940,6 +8957,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -9350,6 +9368,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -9760,6 +9779,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -10170,6 +10190,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -10580,6 +10601,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -10990,6 +11012,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -11400,6 +11423,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -11789,6 +11813,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -12178,6 +12203,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -12533,6 +12559,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -12888,6 +12915,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -13277,6 +13305,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -13666,6 +13695,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/30zonePTAC.idf b/performance_tests/30zonePTAC.idf index c6e5feb3618..ec7f779c38d 100644 --- a/performance_tests/30zonePTAC.idf +++ b/performance_tests/30zonePTAC.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2490,6 +2491,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -3010,6 +3012,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3530,6 +3533,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -4050,6 +4054,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4570,6 +4575,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -5090,6 +5096,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -5610,6 +5617,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -6130,6 +6138,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -6650,6 +6659,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -7170,6 +7180,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -7690,6 +7701,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -8210,6 +8222,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -8730,6 +8743,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -9250,6 +9264,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -9770,6 +9785,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -10290,6 +10306,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -10810,6 +10827,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -11330,6 +11348,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -11850,6 +11869,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -12370,6 +12390,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -12890,6 +12911,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -13410,6 +13432,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -13930,6 +13953,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -14429,6 +14453,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -14928,6 +14953,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -15393,6 +15419,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -15858,6 +15885,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -16357,6 +16385,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -16856,6 +16885,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/30zonePVAV.idf b/performance_tests/30zonePVAV.idf index d4fdf6c3cd6..b466e244813 100644 --- a/performance_tests/30zonePVAV.idf +++ b/performance_tests/30zonePVAV.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -7070,6 +7082,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -7495,6 +7508,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -7920,6 +7934,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -8345,6 +8360,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -8770,6 +8786,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -9195,6 +9212,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -9620,6 +9638,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -10045,6 +10064,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -10470,6 +10490,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -10895,6 +10916,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -11320,6 +11342,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -11745,6 +11768,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -12149,6 +12173,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -12553,6 +12578,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -12923,6 +12949,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -13293,6 +13320,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -13697,6 +13725,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -14101,6 +14130,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/30zonevav.idf b/performance_tests/30zonevav.idf index 606847c3b6f..698a336eab9 100644 --- a/performance_tests/30zonevav.idf +++ b/performance_tests/30zonevav.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -7070,6 +7082,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -7495,6 +7508,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -7920,6 +7934,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -8345,6 +8360,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -8770,6 +8786,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -9195,6 +9212,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -9620,6 +9638,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -10045,6 +10064,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -10470,6 +10490,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -10895,6 +10916,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -11320,6 +11342,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -11745,6 +11768,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -12149,6 +12173,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -12553,6 +12578,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -12923,6 +12949,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -13293,6 +13320,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -13697,6 +13725,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -14101,6 +14130,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/45zonePSZ.idf b/performance_tests/45zonePSZ.idf index 3e466892426..e80bc0f38e3 100644 --- a/performance_tests/45zonePSZ.idf +++ b/performance_tests/45zonePSZ.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2380,6 +2381,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2790,6 +2792,7 @@ ZN_1_FLR_3_SEC_1 Thermostat, !- Name ZN_1_FLR_3_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_1 DualSPSched; !- Control 1 Name @@ -3200,6 +3203,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3610,6 +3614,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -4020,6 +4025,7 @@ ZN_1_FLR_3_SEC_2 Thermostat, !- Name ZN_1_FLR_3_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_2 DualSPSched; !- Control 1 Name @@ -4430,6 +4436,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4840,6 +4847,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -5250,6 +5258,7 @@ ZN_1_FLR_3_SEC_3 Thermostat, !- Name ZN_1_FLR_3_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_3 DualSPSched; !- Control 1 Name @@ -5660,6 +5669,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -6070,6 +6080,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -6480,6 +6491,7 @@ ZN_1_FLR_3_SEC_4 Thermostat, !- Name ZN_1_FLR_3_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_4 DualSPSched; !- Control 1 Name @@ -6890,6 +6902,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -7300,6 +7313,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -7710,6 +7724,7 @@ ZN_1_FLR_3_SEC_5 Thermostat, !- Name ZN_1_FLR_3_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_5 DualSPSched; !- Control 1 Name @@ -8120,6 +8135,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -8530,6 +8546,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -8940,6 +8957,7 @@ ZN_1_FLR_3_SEC_6 Thermostat, !- Name ZN_1_FLR_3_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_6 DualSPSched; !- Control 1 Name @@ -9350,6 +9368,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -9760,6 +9779,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -10170,6 +10190,7 @@ ZN_1_FLR_3_SEC_7 Thermostat, !- Name ZN_1_FLR_3_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_7 DualSPSched; !- Control 1 Name @@ -10580,6 +10601,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -10990,6 +11012,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -11400,6 +11423,7 @@ ZN_1_FLR_3_SEC_8 Thermostat, !- Name ZN_1_FLR_3_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_8 DualSPSched; !- Control 1 Name @@ -11810,6 +11834,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -12220,6 +12245,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -12630,6 +12656,7 @@ ZN_1_FLR_3_SEC_9 Thermostat, !- Name ZN_1_FLR_3_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_9 DualSPSched; !- Control 1 Name @@ -13040,6 +13067,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -13450,6 +13478,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -13860,6 +13889,7 @@ ZN_1_FLR_3_SEC_10 Thermostat, !- Name ZN_1_FLR_3_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_10 DualSPSched; !- Control 1 Name @@ -14270,6 +14300,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -14680,6 +14711,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -15090,6 +15122,7 @@ ZN_1_FLR_3_SEC_11 Thermostat, !- Name ZN_1_FLR_3_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_11 DualSPSched; !- Control 1 Name @@ -15500,6 +15533,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -15910,6 +15944,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -16320,6 +16355,7 @@ ZN_1_FLR_3_SEC_12 Thermostat, !- Name ZN_1_FLR_3_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_12 DualSPSched; !- Control 1 Name @@ -16709,6 +16745,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -17098,6 +17135,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -17487,6 +17525,7 @@ ZN_1_FLR_3_SEC_13 Thermostat, !- Name ZN_1_FLR_3_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_13 DualSPSched; !- Control 1 Name @@ -17842,6 +17881,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -18197,6 +18237,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -18552,6 +18593,7 @@ ZN_1_FLR_3_SEC_14 Thermostat, !- Name ZN_1_FLR_3_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_14 DualSPSched; !- Control 1 Name @@ -18941,6 +18983,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -19330,6 +19373,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name @@ -19719,6 +19763,7 @@ ZN_1_FLR_3_SEC_15 Thermostat, !- Name ZN_1_FLR_3_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/45zonePTAC.idf b/performance_tests/45zonePTAC.idf index fc2995fdb95..c4189dd64d1 100644 --- a/performance_tests/45zonePTAC.idf +++ b/performance_tests/45zonePTAC.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2490,6 +2491,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -3010,6 +3012,7 @@ ZN_1_FLR_3_SEC_1 Thermostat, !- Name ZN_1_FLR_3_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_1 DualSPSched; !- Control 1 Name @@ -3530,6 +3533,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -4050,6 +4054,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -4570,6 +4575,7 @@ ZN_1_FLR_3_SEC_2 Thermostat, !- Name ZN_1_FLR_3_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_2 DualSPSched; !- Control 1 Name @@ -5090,6 +5096,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -5610,6 +5617,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -6130,6 +6138,7 @@ ZN_1_FLR_3_SEC_3 Thermostat, !- Name ZN_1_FLR_3_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_3 DualSPSched; !- Control 1 Name @@ -6650,6 +6659,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -7170,6 +7180,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -7690,6 +7701,7 @@ ZN_1_FLR_3_SEC_4 Thermostat, !- Name ZN_1_FLR_3_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_4 DualSPSched; !- Control 1 Name @@ -8210,6 +8222,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -8730,6 +8743,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -9250,6 +9264,7 @@ ZN_1_FLR_3_SEC_5 Thermostat, !- Name ZN_1_FLR_3_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_5 DualSPSched; !- Control 1 Name @@ -9770,6 +9785,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -10290,6 +10306,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -10810,6 +10827,7 @@ ZN_1_FLR_3_SEC_6 Thermostat, !- Name ZN_1_FLR_3_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_6 DualSPSched; !- Control 1 Name @@ -11330,6 +11348,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -11850,6 +11869,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -12370,6 +12390,7 @@ ZN_1_FLR_3_SEC_7 Thermostat, !- Name ZN_1_FLR_3_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_7 DualSPSched; !- Control 1 Name @@ -12890,6 +12911,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -13410,6 +13432,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -13930,6 +13953,7 @@ ZN_1_FLR_3_SEC_8 Thermostat, !- Name ZN_1_FLR_3_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_8 DualSPSched; !- Control 1 Name @@ -14450,6 +14474,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -14970,6 +14995,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -15490,6 +15516,7 @@ ZN_1_FLR_3_SEC_9 Thermostat, !- Name ZN_1_FLR_3_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_9 DualSPSched; !- Control 1 Name @@ -16010,6 +16037,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -16530,6 +16558,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -17050,6 +17079,7 @@ ZN_1_FLR_3_SEC_10 Thermostat, !- Name ZN_1_FLR_3_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_10 DualSPSched; !- Control 1 Name @@ -17570,6 +17600,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -18090,6 +18121,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -18610,6 +18642,7 @@ ZN_1_FLR_3_SEC_11 Thermostat, !- Name ZN_1_FLR_3_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_11 DualSPSched; !- Control 1 Name @@ -19130,6 +19163,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -19650,6 +19684,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -20170,6 +20205,7 @@ ZN_1_FLR_3_SEC_12 Thermostat, !- Name ZN_1_FLR_3_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_12 DualSPSched; !- Control 1 Name @@ -20669,6 +20705,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -21168,6 +21205,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -21667,6 +21705,7 @@ ZN_1_FLR_3_SEC_13 Thermostat, !- Name ZN_1_FLR_3_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_13 DualSPSched; !- Control 1 Name @@ -22132,6 +22171,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -22597,6 +22637,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -23062,6 +23103,7 @@ ZN_1_FLR_3_SEC_14 Thermostat, !- Name ZN_1_FLR_3_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_14 DualSPSched; !- Control 1 Name @@ -23561,6 +23603,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -24060,6 +24103,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name @@ -24559,6 +24603,7 @@ ZN_1_FLR_3_SEC_15 Thermostat, !- Name ZN_1_FLR_3_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/45zonePVAV.idf b/performance_tests/45zonePVAV.idf index ca05079ed54..80d76438baa 100644 --- a/performance_tests/45zonePVAV.idf +++ b/performance_tests/45zonePVAV.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_3_SEC_1 Thermostat, !- Name ZN_1_FLR_3_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_1 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_3_SEC_2 Thermostat, !- Name ZN_1_FLR_3_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_2 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_3_SEC_3 Thermostat, !- Name ZN_1_FLR_3_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_3 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_3_SEC_4 Thermostat, !- Name ZN_1_FLR_3_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_4 DualSPSched; !- Control 1 Name @@ -7070,6 +7082,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -7495,6 +7508,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -7920,6 +7934,7 @@ ZN_1_FLR_3_SEC_5 Thermostat, !- Name ZN_1_FLR_3_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_5 DualSPSched; !- Control 1 Name @@ -8345,6 +8360,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -8770,6 +8786,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -9195,6 +9212,7 @@ ZN_1_FLR_3_SEC_6 Thermostat, !- Name ZN_1_FLR_3_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_6 DualSPSched; !- Control 1 Name @@ -9620,6 +9638,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -10045,6 +10064,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -10470,6 +10490,7 @@ ZN_1_FLR_3_SEC_7 Thermostat, !- Name ZN_1_FLR_3_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_7 DualSPSched; !- Control 1 Name @@ -10895,6 +10916,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -11320,6 +11342,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -11745,6 +11768,7 @@ ZN_1_FLR_3_SEC_8 Thermostat, !- Name ZN_1_FLR_3_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_8 DualSPSched; !- Control 1 Name @@ -12170,6 +12194,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -12595,6 +12620,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -13020,6 +13046,7 @@ ZN_1_FLR_3_SEC_9 Thermostat, !- Name ZN_1_FLR_3_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_9 DualSPSched; !- Control 1 Name @@ -13445,6 +13472,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -13870,6 +13898,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -14295,6 +14324,7 @@ ZN_1_FLR_3_SEC_10 Thermostat, !- Name ZN_1_FLR_3_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_10 DualSPSched; !- Control 1 Name @@ -14720,6 +14750,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -15145,6 +15176,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -15570,6 +15602,7 @@ ZN_1_FLR_3_SEC_11 Thermostat, !- Name ZN_1_FLR_3_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_11 DualSPSched; !- Control 1 Name @@ -15995,6 +16028,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -16420,6 +16454,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -16845,6 +16880,7 @@ ZN_1_FLR_3_SEC_12 Thermostat, !- Name ZN_1_FLR_3_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_12 DualSPSched; !- Control 1 Name @@ -17249,6 +17285,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -17653,6 +17690,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -18057,6 +18095,7 @@ ZN_1_FLR_3_SEC_13 Thermostat, !- Name ZN_1_FLR_3_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_13 DualSPSched; !- Control 1 Name @@ -18427,6 +18466,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -18797,6 +18837,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -19167,6 +19208,7 @@ ZN_1_FLR_3_SEC_14 Thermostat, !- Name ZN_1_FLR_3_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_14 DualSPSched; !- Control 1 Name @@ -19571,6 +19613,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -19975,6 +20018,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name @@ -20379,6 +20423,7 @@ ZN_1_FLR_3_SEC_15 Thermostat, !- Name ZN_1_FLR_3_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/45zonevav.idf b/performance_tests/45zonevav.idf index b1a79b6c292..3eada4ad954 100644 --- a/performance_tests/45zonevav.idf +++ b/performance_tests/45zonevav.idf @@ -1970,6 +1970,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -2395,6 +2396,7 @@ ZN_1_FLR_2_SEC_1 Thermostat, !- Name ZN_1_FLR_2_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_1 DualSPSched; !- Control 1 Name @@ -2820,6 +2822,7 @@ ZN_1_FLR_3_SEC_1 Thermostat, !- Name ZN_1_FLR_3_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_1 DualSPSched; !- Control 1 Name @@ -3245,6 +3248,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3670,6 +3674,7 @@ ZN_1_FLR_2_SEC_2 Thermostat, !- Name ZN_1_FLR_2_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_2 DualSPSched; !- Control 1 Name @@ -4095,6 +4100,7 @@ ZN_1_FLR_3_SEC_2 Thermostat, !- Name ZN_1_FLR_3_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_2 DualSPSched; !- Control 1 Name @@ -4520,6 +4526,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4945,6 +4952,7 @@ ZN_1_FLR_2_SEC_3 Thermostat, !- Name ZN_1_FLR_2_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_3 DualSPSched; !- Control 1 Name @@ -5370,6 +5378,7 @@ ZN_1_FLR_3_SEC_3 Thermostat, !- Name ZN_1_FLR_3_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_3 DualSPSched; !- Control 1 Name @@ -5795,6 +5804,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -6220,6 +6230,7 @@ ZN_1_FLR_2_SEC_4 Thermostat, !- Name ZN_1_FLR_2_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_4 DualSPSched; !- Control 1 Name @@ -6645,6 +6656,7 @@ ZN_1_FLR_3_SEC_4 Thermostat, !- Name ZN_1_FLR_3_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_4 DualSPSched; !- Control 1 Name @@ -7070,6 +7082,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name @@ -7495,6 +7508,7 @@ ZN_1_FLR_2_SEC_5 Thermostat, !- Name ZN_1_FLR_2_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_5 DualSPSched; !- Control 1 Name @@ -7920,6 +7934,7 @@ ZN_1_FLR_3_SEC_5 Thermostat, !- Name ZN_1_FLR_3_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_5 DualSPSched; !- Control 1 Name @@ -8345,6 +8360,7 @@ ZN_1_FLR_1_SEC_6 Thermostat, !- Name ZN_1_FLR_1_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_6 DualSPSched; !- Control 1 Name @@ -8770,6 +8786,7 @@ ZN_1_FLR_2_SEC_6 Thermostat, !- Name ZN_1_FLR_2_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_6 DualSPSched; !- Control 1 Name @@ -9195,6 +9212,7 @@ ZN_1_FLR_3_SEC_6 Thermostat, !- Name ZN_1_FLR_3_SEC_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_6 DualSPSched; !- Control 1 Name @@ -9620,6 +9638,7 @@ ZN_1_FLR_1_SEC_7 Thermostat, !- Name ZN_1_FLR_1_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_7 DualSPSched; !- Control 1 Name @@ -10045,6 +10064,7 @@ ZN_1_FLR_2_SEC_7 Thermostat, !- Name ZN_1_FLR_2_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_7 DualSPSched; !- Control 1 Name @@ -10470,6 +10490,7 @@ ZN_1_FLR_3_SEC_7 Thermostat, !- Name ZN_1_FLR_3_SEC_7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_7 DualSPSched; !- Control 1 Name @@ -10895,6 +10916,7 @@ ZN_1_FLR_1_SEC_8 Thermostat, !- Name ZN_1_FLR_1_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_8 DualSPSched; !- Control 1 Name @@ -11320,6 +11342,7 @@ ZN_1_FLR_2_SEC_8 Thermostat, !- Name ZN_1_FLR_2_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_8 DualSPSched; !- Control 1 Name @@ -11745,6 +11768,7 @@ ZN_1_FLR_3_SEC_8 Thermostat, !- Name ZN_1_FLR_3_SEC_8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_8 DualSPSched; !- Control 1 Name @@ -12170,6 +12194,7 @@ ZN_1_FLR_1_SEC_9 Thermostat, !- Name ZN_1_FLR_1_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_9 DualSPSched; !- Control 1 Name @@ -12595,6 +12620,7 @@ ZN_1_FLR_2_SEC_9 Thermostat, !- Name ZN_1_FLR_2_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_9 DualSPSched; !- Control 1 Name @@ -13020,6 +13046,7 @@ ZN_1_FLR_3_SEC_9 Thermostat, !- Name ZN_1_FLR_3_SEC_9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_9 DualSPSched; !- Control 1 Name @@ -13445,6 +13472,7 @@ ZN_1_FLR_1_SEC_10 Thermostat, !- Name ZN_1_FLR_1_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_10 DualSPSched; !- Control 1 Name @@ -13870,6 +13898,7 @@ ZN_1_FLR_2_SEC_10 Thermostat, !- Name ZN_1_FLR_2_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_10 DualSPSched; !- Control 1 Name @@ -14295,6 +14324,7 @@ ZN_1_FLR_3_SEC_10 Thermostat, !- Name ZN_1_FLR_3_SEC_10, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_10 DualSPSched; !- Control 1 Name @@ -14720,6 +14750,7 @@ ZN_1_FLR_1_SEC_11 Thermostat, !- Name ZN_1_FLR_1_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_11 DualSPSched; !- Control 1 Name @@ -15145,6 +15176,7 @@ ZN_1_FLR_2_SEC_11 Thermostat, !- Name ZN_1_FLR_2_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_11 DualSPSched; !- Control 1 Name @@ -15570,6 +15602,7 @@ ZN_1_FLR_3_SEC_11 Thermostat, !- Name ZN_1_FLR_3_SEC_11, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_11 DualSPSched; !- Control 1 Name @@ -15995,6 +16028,7 @@ ZN_1_FLR_1_SEC_12 Thermostat, !- Name ZN_1_FLR_1_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_12 DualSPSched; !- Control 1 Name @@ -16420,6 +16454,7 @@ ZN_1_FLR_2_SEC_12 Thermostat, !- Name ZN_1_FLR_2_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_12 DualSPSched; !- Control 1 Name @@ -16845,6 +16880,7 @@ ZN_1_FLR_3_SEC_12 Thermostat, !- Name ZN_1_FLR_3_SEC_12, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_12 DualSPSched; !- Control 1 Name @@ -17249,6 +17285,7 @@ ZN_1_FLR_1_SEC_13 Thermostat, !- Name ZN_1_FLR_1_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_13 DualSPSched; !- Control 1 Name @@ -17653,6 +17690,7 @@ ZN_1_FLR_2_SEC_13 Thermostat, !- Name ZN_1_FLR_2_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_13 DualSPSched; !- Control 1 Name @@ -18057,6 +18095,7 @@ ZN_1_FLR_3_SEC_13 Thermostat, !- Name ZN_1_FLR_3_SEC_13, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_13 DualSPSched; !- Control 1 Name @@ -18427,6 +18466,7 @@ ZN_1_FLR_1_SEC_14 Thermostat, !- Name ZN_1_FLR_1_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_14 DualSPSched; !- Control 1 Name @@ -18797,6 +18837,7 @@ ZN_1_FLR_2_SEC_14 Thermostat, !- Name ZN_1_FLR_2_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_14 DualSPSched; !- Control 1 Name @@ -19167,6 +19208,7 @@ ZN_1_FLR_3_SEC_14 Thermostat, !- Name ZN_1_FLR_3_SEC_14, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_14 DualSPSched; !- Control 1 Name @@ -19571,6 +19613,7 @@ ZN_1_FLR_1_SEC_15 Thermostat, !- Name ZN_1_FLR_1_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_15 DualSPSched; !- Control 1 Name @@ -19975,6 +20018,7 @@ ZN_1_FLR_2_SEC_15 Thermostat, !- Name ZN_1_FLR_2_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_2_SEC_15 DualSPSched; !- Control 1 Name @@ -20379,6 +20423,7 @@ ZN_1_FLR_3_SEC_15 Thermostat, !- Name ZN_1_FLR_3_SEC_15, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_3_SEC_15 DualSPSched; !- Control 1 Name diff --git a/performance_tests/BenchmarkHospitalNew_USA_CA_SAN_FRANCISCO.idf b/performance_tests/BenchmarkHospitalNew_USA_CA_SAN_FRANCISCO.idf index 6f5f41a47fa..755cf3f28fd 100644 --- a/performance_tests/BenchmarkHospitalNew_USA_CA_SAN_FRANCISCO.idf +++ b/performance_tests/BenchmarkHospitalNew_USA_CA_SAN_FRANCISCO.idf @@ -2090,6 +2090,7 @@ ER_Exam1_Mult4_Flr_1 Thermostat, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -2515,6 +2516,7 @@ ER_Exam2_Flr_1 Thermostat, !- Name ER_Exam2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam2_Flr_1 DualSPSched; !- Control 1 Name @@ -2940,6 +2942,7 @@ ER_Exam3_Mult4_Flr_1 Thermostat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -3365,6 +3368,7 @@ ER_Exam4_Flr_1 Thermostat, !- Name ER_Exam4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam4_Flr_1 DualSPSched; !- Control 1 Name @@ -3790,6 +3794,7 @@ ER_Exam5_Mult4_Flr_1 Thermostat, !- Name ER_Exam5_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam5_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -4230,6 +4235,7 @@ Office1_Mult4_Flr_1 Thermostat, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -4708,6 +4714,7 @@ Lobby_Flr_1 Thermostat, !- Name Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -5067,6 +5074,7 @@ Corridor_Flr_1 Thermostat, !- Name Corridor_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_1 DualSPSched; !- Control 1 Name @@ -5528,6 +5536,7 @@ ER_NurseStat_Flr_1 Thermostat, !- Name ER_NurseStat_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_NurseStat_Flr_1 DualSPSched; !- Control 1 Name @@ -5898,6 +5907,7 @@ OR1_Flr_2 Thermostat, !- Name OR1_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR1_Flr_2 DualSPSched; !- Control 1 Name @@ -6323,6 +6333,7 @@ OR2_Mult5_Flr_2 Thermostat, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -6748,6 +6759,7 @@ OR3_Flr_2 Thermostat, !- Name OR3_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR3_Flr_2 DualSPSched; !- Control 1 Name @@ -7173,6 +7185,7 @@ OR4_Flr_2 Thermostat, !- Name OR4_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR4_Flr_2 DualSPSched; !- Control 1 Name @@ -7613,6 +7626,7 @@ IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -8013,6 +8027,7 @@ IC_PatRoom2_Flr_2 Thermostat, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name @@ -8398,6 +8413,7 @@ IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name @@ -8783,6 +8799,7 @@ ICU_Flr_2 Thermostat, !- Name ICU_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_Flr_2 DualSPSched; !- Control 1 Name @@ -9153,6 +9170,7 @@ ICU_NurseSat_Flr_2 Thermostat, !- Name ICU_NurseSat_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_NurseSat_Flr_2 DualSPSched; !- Control 1 Name @@ -9495,6 +9513,7 @@ Corridor_Flr_2 Thermostat, !- Name Corridor_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_2 DualSPSched; !- Control 1 Name @@ -9956,6 +9975,7 @@ OR_NurseSat_Flr_2 Thermostat, !- Name OR_NurseSat_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR_NurseSat_Flr_2 DualSPSched; !- Control 1 Name @@ -10341,6 +10361,7 @@ PatRoom1_Mult10_Flr_3 Thermostat, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -10796,6 +10817,7 @@ PatRoom2_Flr_3 Thermostat, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_3 DualSPSched; !- Control 1 Name @@ -11236,6 +11258,7 @@ PatRoom3_Mult10_Flr_3 Thermostat, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -11691,6 +11714,7 @@ PatRoom4_Flr_3 Thermostat, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_3 DualSPSched; !- Control 1 Name @@ -12131,6 +12155,7 @@ PatRoom5_Mult10_Flr_3 Thermostat, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -12556,6 +12581,7 @@ PhysTherapy_Flr_3 Thermostat, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name @@ -13011,6 +13037,7 @@ PatRoom6_Flr_3 Thermostat, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_3 DualSPSched; !- Control 1 Name @@ -13451,6 +13478,7 @@ PatRoom7_Mult10_Flr_3 Thermostat, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -13906,6 +13934,7 @@ PatRoom8_Flr_3 Thermostat, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_3 DualSPSched; !- Control 1 Name @@ -14445,6 +14474,7 @@ NurseSat_Lobby_Flr_3 Thermostat, !- Name NurseSat_Lobby_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseSat_Lobby_Flr_3 DualSPSched; !- Control 1 Name @@ -14853,6 +14883,7 @@ Lab_Flr_3 Thermostat, !- Name Lab_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_3 DualSPSched; !- Control 1 Name @@ -15415,6 +15446,7 @@ Corridor_SE_Flr_3 Thermostat, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name @@ -15922,6 +15954,7 @@ Corridor_NW_Flr_3 Thermostat, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name @@ -16307,6 +16340,7 @@ PatRoom1_Mult10_Flr_4 Thermostat, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -16762,6 +16796,7 @@ PatRoom2_Flr_4 Thermostat, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_4 DualSPSched; !- Control 1 Name @@ -17202,6 +17237,7 @@ PatRoom3_Mult10_Flr_4 Thermostat, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -17657,6 +17693,7 @@ PatRoom4_Flr_4 Thermostat, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_4 DualSPSched; !- Control 1 Name @@ -18097,6 +18134,7 @@ PatRoom5_Mult10_Flr_4 Thermostat, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18522,6 +18560,7 @@ Radiology_Flr_4 Thermostat, !- Name Radiology_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Radiology_Flr_4 DualSPSched; !- Control 1 Name @@ -18977,6 +19016,7 @@ PatRoom6_Flr_4 Thermostat, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_4 DualSPSched; !- Control 1 Name @@ -19417,6 +19457,7 @@ PatRoom7_Mult10_Flr_4 Thermostat, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -19872,6 +19913,7 @@ PatRoom8_Flr_4 Thermostat, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_4 DualSPSched; !- Control 1 Name @@ -20411,6 +20453,7 @@ NurseSat_Lobby_Flr_4 Thermostat, !- Name NurseSat_Lobby_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseSat_Lobby_Flr_4 DualSPSched; !- Control 1 Name @@ -20819,6 +20862,7 @@ Lab_Flr_4 Thermostat, !- Name Lab_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_4 DualSPSched; !- Control 1 Name @@ -21381,6 +21425,7 @@ Corridor_SE_Flr_4 Thermostat, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name @@ -21888,6 +21933,7 @@ Corridor_NW_Flr_4 Thermostat, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name @@ -22273,6 +22319,7 @@ Dining_Flr_5 Thermostat, !- Name Dining_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_5 DualSPSched;!- Control 1 Name @@ -22679,6 +22726,7 @@ NurseSat_Flr_5 Thermostat, !- Name NurseSat_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseSat_Flr_5 DualSPSched; !- Control 1 Name @@ -23095,6 +23143,7 @@ Kitchen_Flr_5 Thermostat,!- Name Kitchen_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_5 DualSPSched; !- Control 1 Name @@ -23831,6 +23880,7 @@ Office1_Flr_5 Thermostat,!- Name Office1_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Flr_5 DualSPSched; !- Control 1 Name @@ -24216,6 +24266,7 @@ Office2_Mult5_Flr_5 Thermostat, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name @@ -24616,6 +24667,7 @@ Office3_Flr_5 Thermostat,!- Name Office3_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office3_Flr_5 DualSPSched; !- Control 1 Name @@ -25001,6 +25053,7 @@ Office4_Mult6_Flr_5 Thermostat, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name @@ -25419,6 +25472,7 @@ Corridor_Flr_5 Thermostat, !- Name Corridor_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_5 DualSPSched; !- Control 1 Name diff --git a/performance_tests/BenchmarkLargeOfficeNew_USA_CA_SAN_FRANCISCO_10_windows_per_zone.idf b/performance_tests/BenchmarkLargeOfficeNew_USA_CA_SAN_FRANCISCO_10_windows_per_zone.idf index 1be3ea2ea62..a77e83ead96 100644 --- a/performance_tests/BenchmarkLargeOfficeNew_USA_CA_SAN_FRANCISCO_10_windows_per_zone.idf +++ b/performance_tests/BenchmarkLargeOfficeNew_USA_CA_SAN_FRANCISCO_10_windows_per_zone.idf @@ -2098,6 +2098,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2523,6 +2524,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2948,6 +2950,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3373,6 +3376,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3743,6 +3747,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -4113,6 +4118,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4483,6 +4489,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4853,6 +4860,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5223,6 +5231,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5593,6 +5602,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5963,6 +5973,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6333,6 +6344,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6703,6 +6715,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7073,6 +7086,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7443,6 +7457,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/performance_tests/Benchmarklargeofficenew_usa_ca_san_francisco_no_reports.idf b/performance_tests/Benchmarklargeofficenew_usa_ca_san_francisco_no_reports.idf index b527eb5c39a..80ff0f3f1d8 100644 --- a/performance_tests/Benchmarklargeofficenew_usa_ca_san_francisco_no_reports.idf +++ b/performance_tests/Benchmarklargeofficenew_usa_ca_san_francisco_no_reports.idf @@ -2098,6 +2098,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2523,6 +2524,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2948,6 +2950,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3388,6 +3391,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3773,6 +3777,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -4158,6 +4163,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4543,6 +4549,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4928,6 +4935,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5313,6 +5321,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5698,6 +5707,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6083,6 +6093,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6468,6 +6479,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6853,6 +6865,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7238,6 +7251,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7623,6 +7637,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/10zone1vav.idf b/performance_tests/Inactive/10zone1vav.idf index e5b0f0d3dca..a907b7080e5 100644 --- a/performance_tests/Inactive/10zone1vav.idf +++ b/performance_tests/Inactive/10zone1vav.idf @@ -5261,6 +5261,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -5277,6 +5278,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -5293,6 +5295,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -5309,6 +5312,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -5325,6 +5329,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -5341,6 +5346,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -5357,6 +5363,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -5373,6 +5380,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -5389,6 +5397,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -5405,6 +5414,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/20zone1vav.idf b/performance_tests/Inactive/20zone1vav.idf index 43cab4ea409..46f4ca5ac61 100644 --- a/performance_tests/Inactive/20zone1vav.idf +++ b/performance_tests/Inactive/20zone1vav.idf @@ -9891,6 +9891,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -9907,6 +9908,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -9923,6 +9925,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -9939,6 +9942,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -9955,6 +9959,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -9971,6 +9976,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -9987,6 +9993,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -10003,6 +10010,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -10019,6 +10027,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -10035,6 +10044,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -10051,6 +10061,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -10067,6 +10078,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -10083,6 +10095,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -10099,6 +10112,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -10115,6 +10129,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -10131,6 +10146,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -10147,6 +10163,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -10163,6 +10180,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -10179,6 +10197,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -10195,6 +10214,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/30zone1vav.idf b/performance_tests/Inactive/30zone1vav.idf index baaee52159a..03b7a9be967 100644 --- a/performance_tests/Inactive/30zone1vav.idf +++ b/performance_tests/Inactive/30zone1vav.idf @@ -14521,6 +14521,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -14537,6 +14538,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -14553,6 +14555,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -14569,6 +14572,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -14585,6 +14589,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -14601,6 +14606,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -14617,6 +14623,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -14633,6 +14640,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -14649,6 +14657,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -14665,6 +14674,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -14681,6 +14691,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -14697,6 +14708,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -14713,6 +14725,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -14729,6 +14742,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -14745,6 +14759,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -14761,6 +14776,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -14777,6 +14793,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -14793,6 +14810,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -14809,6 +14827,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -14825,6 +14844,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -14841,6 +14861,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -14857,6 +14878,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -14873,6 +14895,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -14889,6 +14912,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -14905,6 +14929,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -14921,6 +14946,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -14937,6 +14963,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -14953,6 +14980,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -14969,6 +14997,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -14985,6 +15014,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/40zone1vav.idf b/performance_tests/Inactive/40zone1vav.idf index 19974b8a483..26c3b3e2382 100644 --- a/performance_tests/Inactive/40zone1vav.idf +++ b/performance_tests/Inactive/40zone1vav.idf @@ -19151,6 +19151,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -19167,6 +19168,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -19183,6 +19185,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -19199,6 +19202,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -19215,6 +19219,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -19231,6 +19236,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -19247,6 +19253,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -19263,6 +19270,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -19279,6 +19287,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -19295,6 +19304,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -19311,6 +19321,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -19327,6 +19338,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -19343,6 +19355,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -19359,6 +19372,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -19375,6 +19389,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -19391,6 +19406,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -19407,6 +19423,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -19423,6 +19440,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -19439,6 +19457,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -19455,6 +19474,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -19471,6 +19491,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -19487,6 +19508,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -19503,6 +19525,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -19519,6 +19542,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -19535,6 +19559,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -19551,6 +19576,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -19567,6 +19593,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -19583,6 +19610,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -19599,6 +19627,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -19615,6 +19644,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -19631,6 +19661,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -19647,6 +19678,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -19663,6 +19695,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -19679,6 +19712,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -19695,6 +19729,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -19711,6 +19746,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -19727,6 +19763,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -19743,6 +19780,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -19759,6 +19797,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -19775,6 +19814,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/50zone1vav.idf b/performance_tests/Inactive/50zone1vav.idf index d28434f93f0..0cc5a005c62 100644 --- a/performance_tests/Inactive/50zone1vav.idf +++ b/performance_tests/Inactive/50zone1vav.idf @@ -23781,6 +23781,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -23797,6 +23798,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -23813,6 +23815,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -23829,6 +23832,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -23845,6 +23849,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -23861,6 +23866,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -23877,6 +23883,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -23893,6 +23900,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -23909,6 +23917,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -23925,6 +23934,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -23941,6 +23951,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -23957,6 +23968,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -23973,6 +23985,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -23989,6 +24002,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -24005,6 +24019,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -24021,6 +24036,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -24037,6 +24053,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -24053,6 +24070,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -24069,6 +24087,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -24085,6 +24104,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -24101,6 +24121,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -24117,6 +24138,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -24133,6 +24155,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -24149,6 +24172,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -24165,6 +24189,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -24181,6 +24206,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -24197,6 +24223,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -24213,6 +24240,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -24229,6 +24257,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -24245,6 +24274,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -24261,6 +24291,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -24277,6 +24308,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -24293,6 +24325,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -24309,6 +24342,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -24325,6 +24359,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -24341,6 +24376,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -24357,6 +24393,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -24373,6 +24410,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -24389,6 +24427,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -24405,6 +24444,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -24421,6 +24461,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -24437,6 +24478,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -24453,6 +24495,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -24469,6 +24512,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -24485,6 +24529,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -24501,6 +24546,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -24517,6 +24563,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -24533,6 +24580,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -24549,6 +24597,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -24565,6 +24614,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/60Zone1PVAV.idf b/performance_tests/Inactive/60Zone1PVAV.idf index bebefd56d2b..854769843c4 100644 --- a/performance_tests/Inactive/60Zone1PVAV.idf +++ b/performance_tests/Inactive/60Zone1PVAV.idf @@ -28410,6 +28410,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -28426,6 +28427,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -28442,6 +28444,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -28458,6 +28461,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -28474,6 +28478,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -28490,6 +28495,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -28506,6 +28512,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -28522,6 +28529,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -28538,6 +28546,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -28554,6 +28563,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -28570,6 +28580,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -28586,6 +28597,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -28602,6 +28614,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -28618,6 +28631,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -28634,6 +28648,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -28650,6 +28665,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -28666,6 +28682,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -28682,6 +28699,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -28698,6 +28716,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -28714,6 +28733,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -28730,6 +28750,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -28746,6 +28767,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -28762,6 +28784,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -28778,6 +28801,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -28794,6 +28818,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -28810,6 +28835,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -28826,6 +28852,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -28842,6 +28869,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -28858,6 +28886,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -28874,6 +28903,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -28890,6 +28920,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -28906,6 +28937,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -28922,6 +28954,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -28938,6 +28971,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -28954,6 +28988,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -28970,6 +29005,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -28986,6 +29022,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -29002,6 +29039,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -29018,6 +29056,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -29034,6 +29073,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -29050,6 +29090,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -29066,6 +29107,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -29082,6 +29124,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -29098,6 +29141,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -29114,6 +29158,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -29130,6 +29175,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -29146,6 +29192,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -29162,6 +29209,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -29178,6 +29226,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -29194,6 +29243,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name @@ -29210,6 +29260,7 @@ rm6_1_C Thermostat, !- Name rm6_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_1_C DualSPSched; !- Control 1 Name @@ -29226,6 +29277,7 @@ rm6_2_C Thermostat, !- Name rm6_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_2_C DualSPSched; !- Control 1 Name @@ -29242,6 +29294,7 @@ rm6_3_C Thermostat, !- Name rm6_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_3_C DualSPSched; !- Control 1 Name @@ -29258,6 +29311,7 @@ rm6_4_C Thermostat, !- Name rm6_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_4_C DualSPSched; !- Control 1 Name @@ -29274,6 +29328,7 @@ rm6_5_C Thermostat, !- Name rm6_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_5_C DualSPSched; !- Control 1 Name @@ -29290,6 +29345,7 @@ rm6_6_C Thermostat, !- Name rm6_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_6_C DualSPSched; !- Control 1 Name @@ -29306,6 +29362,7 @@ rm6_7_C Thermostat, !- Name rm6_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_7_C DualSPSched; !- Control 1 Name @@ -29322,6 +29379,7 @@ rm6_8_C Thermostat, !- Name rm6_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_8_C DualSPSched; !- Control 1 Name @@ -29338,6 +29396,7 @@ rm6_9_C Thermostat, !- Name rm6_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_9_C DualSPSched; !- Control 1 Name @@ -29354,6 +29413,7 @@ rm6_10_C Thermostat, !- Name rm6_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/60Zone1VAV.idf b/performance_tests/Inactive/60Zone1VAV.idf index 4c0ee80bb95..0d12e321ce1 100644 --- a/performance_tests/Inactive/60Zone1VAV.idf +++ b/performance_tests/Inactive/60Zone1VAV.idf @@ -28411,6 +28411,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -28427,6 +28428,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -28443,6 +28445,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -28459,6 +28462,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -28475,6 +28479,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -28491,6 +28496,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -28507,6 +28513,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -28523,6 +28530,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -28539,6 +28547,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -28555,6 +28564,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -28571,6 +28581,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -28587,6 +28598,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -28603,6 +28615,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -28619,6 +28632,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -28635,6 +28649,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -28651,6 +28666,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -28667,6 +28683,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -28683,6 +28700,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -28699,6 +28717,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -28715,6 +28734,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -28731,6 +28751,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -28747,6 +28768,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -28763,6 +28785,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -28779,6 +28802,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -28795,6 +28819,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -28811,6 +28836,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -28827,6 +28853,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -28843,6 +28870,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -28859,6 +28887,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -28875,6 +28904,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -28891,6 +28921,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -28907,6 +28938,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -28923,6 +28955,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -28939,6 +28972,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -28955,6 +28989,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -28971,6 +29006,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -28987,6 +29023,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -29003,6 +29040,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -29019,6 +29057,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -29035,6 +29074,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -29051,6 +29091,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -29067,6 +29108,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -29083,6 +29125,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -29099,6 +29142,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -29115,6 +29159,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -29131,6 +29176,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -29147,6 +29193,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -29163,6 +29210,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -29179,6 +29227,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -29195,6 +29244,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name @@ -29211,6 +29261,7 @@ rm6_1_C Thermostat, !- Name rm6_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_1_C DualSPSched; !- Control 1 Name @@ -29227,6 +29278,7 @@ rm6_2_C Thermostat, !- Name rm6_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_2_C DualSPSched; !- Control 1 Name @@ -29243,6 +29295,7 @@ rm6_3_C Thermostat, !- Name rm6_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_3_C DualSPSched; !- Control 1 Name @@ -29259,6 +29312,7 @@ rm6_4_C Thermostat, !- Name rm6_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_4_C DualSPSched; !- Control 1 Name @@ -29275,6 +29329,7 @@ rm6_5_C Thermostat, !- Name rm6_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_5_C DualSPSched; !- Control 1 Name @@ -29291,6 +29346,7 @@ rm6_6_C Thermostat, !- Name rm6_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_6_C DualSPSched; !- Control 1 Name @@ -29307,6 +29363,7 @@ rm6_7_C Thermostat, !- Name rm6_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_7_C DualSPSched; !- Control 1 Name @@ -29323,6 +29380,7 @@ rm6_8_C Thermostat, !- Name rm6_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_8_C DualSPSched; !- Control 1 Name @@ -29339,6 +29397,7 @@ rm6_9_C Thermostat, !- Name rm6_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_9_C DualSPSched; !- Control 1 Name @@ -29355,6 +29414,7 @@ rm6_10_C Thermostat, !- Name rm6_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/60zone2PVAV.idf b/performance_tests/Inactive/60zone2PVAV.idf index e3fa8664364..faddcd82005 100644 --- a/performance_tests/Inactive/60zone2PVAV.idf +++ b/performance_tests/Inactive/60zone2PVAV.idf @@ -28411,6 +28411,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -28427,6 +28428,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -28443,6 +28445,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -28459,6 +28462,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -28475,6 +28479,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -28491,6 +28496,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -28507,6 +28513,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -28523,6 +28530,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -28539,6 +28547,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -28555,6 +28564,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -28571,6 +28581,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -28587,6 +28598,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -28603,6 +28615,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -28619,6 +28632,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -28635,6 +28649,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -28651,6 +28666,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -28667,6 +28683,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -28683,6 +28700,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -28699,6 +28717,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -28715,6 +28734,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -28731,6 +28751,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -28747,6 +28768,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -28763,6 +28785,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -28779,6 +28802,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -28795,6 +28819,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -28811,6 +28836,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -28827,6 +28853,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -28843,6 +28870,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -28859,6 +28887,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -28875,6 +28904,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -32495,6 +32525,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -32511,6 +32542,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -32527,6 +32559,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -32543,6 +32576,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -32559,6 +32593,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -32575,6 +32610,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -32591,6 +32627,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -32607,6 +32644,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -32623,6 +32661,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -32639,6 +32678,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -32655,6 +32695,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -32671,6 +32712,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -32687,6 +32729,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -32703,6 +32746,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -32719,6 +32763,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -32735,6 +32780,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -32751,6 +32797,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -32767,6 +32814,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -32783,6 +32831,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -32799,6 +32848,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name @@ -32815,6 +32865,7 @@ rm6_1_C Thermostat, !- Name rm6_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_1_C DualSPSched; !- Control 1 Name @@ -32831,6 +32882,7 @@ rm6_2_C Thermostat, !- Name rm6_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_2_C DualSPSched; !- Control 1 Name @@ -32847,6 +32899,7 @@ rm6_3_C Thermostat, !- Name rm6_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_3_C DualSPSched; !- Control 1 Name @@ -32863,6 +32916,7 @@ rm6_4_C Thermostat, !- Name rm6_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_4_C DualSPSched; !- Control 1 Name @@ -32879,6 +32933,7 @@ rm6_5_C Thermostat, !- Name rm6_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_5_C DualSPSched; !- Control 1 Name @@ -32895,6 +32950,7 @@ rm6_6_C Thermostat, !- Name rm6_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_6_C DualSPSched; !- Control 1 Name @@ -32911,6 +32967,7 @@ rm6_7_C Thermostat, !- Name rm6_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_7_C DualSPSched; !- Control 1 Name @@ -32927,6 +32984,7 @@ rm6_8_C Thermostat, !- Name rm6_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_8_C DualSPSched; !- Control 1 Name @@ -32943,6 +33001,7 @@ rm6_9_C Thermostat, !- Name rm6_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_9_C DualSPSched; !- Control 1 Name @@ -32959,6 +33018,7 @@ rm6_10_C Thermostat, !- Name rm6_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/60zone3PVAV.idf b/performance_tests/Inactive/60zone3PVAV.idf index e0c2f7aa433..9978349c225 100644 --- a/performance_tests/Inactive/60zone3PVAV.idf +++ b/performance_tests/Inactive/60zone3PVAV.idf @@ -28411,6 +28411,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -28427,6 +28428,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -28443,6 +28445,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -28459,6 +28462,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -28475,6 +28479,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -28491,6 +28496,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -28507,6 +28513,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -28523,6 +28530,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -28539,6 +28547,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -28555,6 +28564,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -28571,6 +28581,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -28587,6 +28598,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -28603,6 +28615,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -28619,6 +28632,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -28635,6 +28649,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -28651,6 +28666,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -28667,6 +28683,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -28683,6 +28700,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -28699,6 +28717,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -28715,6 +28734,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -31225,6 +31245,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -31241,6 +31262,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -31257,6 +31279,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -31273,6 +31296,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -31289,6 +31313,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -31305,6 +31330,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -31321,6 +31347,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -31337,6 +31364,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -31353,6 +31381,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -31369,6 +31398,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -31385,6 +31415,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -31401,6 +31432,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -31417,6 +31449,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -31433,6 +31466,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -31449,6 +31483,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -31465,6 +31500,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -31481,6 +31517,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -31497,6 +31534,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -31513,6 +31551,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -31529,6 +31568,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -33995,6 +34035,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -34011,6 +34052,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -34027,6 +34069,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -34043,6 +34086,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -34059,6 +34103,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -34075,6 +34120,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -34091,6 +34137,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -34107,6 +34154,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -34123,6 +34171,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -34139,6 +34188,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name @@ -34155,6 +34205,7 @@ rm6_1_C Thermostat, !- Name rm6_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_1_C DualSPSched; !- Control 1 Name @@ -34171,6 +34222,7 @@ rm6_2_C Thermostat, !- Name rm6_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_2_C DualSPSched; !- Control 1 Name @@ -34187,6 +34239,7 @@ rm6_3_C Thermostat, !- Name rm6_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_3_C DualSPSched; !- Control 1 Name @@ -34203,6 +34256,7 @@ rm6_4_C Thermostat, !- Name rm6_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_4_C DualSPSched; !- Control 1 Name @@ -34219,6 +34273,7 @@ rm6_5_C Thermostat, !- Name rm6_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_5_C DualSPSched; !- Control 1 Name @@ -34235,6 +34290,7 @@ rm6_6_C Thermostat, !- Name rm6_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_6_C DualSPSched; !- Control 1 Name @@ -34251,6 +34307,7 @@ rm6_7_C Thermostat, !- Name rm6_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_7_C DualSPSched; !- Control 1 Name @@ -34267,6 +34324,7 @@ rm6_8_C Thermostat, !- Name rm6_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_8_C DualSPSched; !- Control 1 Name @@ -34283,6 +34341,7 @@ rm6_9_C Thermostat, !- Name rm6_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_9_C DualSPSched; !- Control 1 Name @@ -34299,6 +34358,7 @@ rm6_10_C Thermostat, !- Name rm6_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/60zone6PVAV.idf b/performance_tests/Inactive/60zone6PVAV.idf index 486b5d088ad..66a97b0fc1a 100644 --- a/performance_tests/Inactive/60zone6PVAV.idf +++ b/performance_tests/Inactive/60zone6PVAV.idf @@ -28411,6 +28411,7 @@ rm1_1_C Thermostat, !- Name rm1_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_1_C DualSPSched; !- Control 1 Name @@ -28427,6 +28428,7 @@ rm1_3_C Thermostat, !- Name rm1_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_3_C DualSPSched; !- Control 1 Name @@ -28443,6 +28445,7 @@ rm1_4_C Thermostat, !- Name rm1_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_4_C DualSPSched; !- Control 1 Name @@ -28459,6 +28462,7 @@ rm1_5_C Thermostat, !- Name rm1_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_5_C DualSPSched; !- Control 1 Name @@ -28475,6 +28479,7 @@ rm1_6_C Thermostat, !- Name rm1_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_6_C DualSPSched; !- Control 1 Name @@ -28491,6 +28496,7 @@ rm1_7_C Thermostat, !- Name rm1_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_7_C DualSPSched; !- Control 1 Name @@ -28507,6 +28513,7 @@ rm1_8_C Thermostat, !- Name rm1_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_8_C DualSPSched; !- Control 1 Name @@ -28523,6 +28530,7 @@ rm1_9_C Thermostat, !- Name rm1_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_9_C DualSPSched; !- Control 1 Name @@ -28539,6 +28547,7 @@ rm1_10_C Thermostat, !- Name rm1_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_10_C DualSPSched; !- Control 1 Name @@ -28555,6 +28564,7 @@ rm1_2_C Thermostat, !- Name rm1_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm1_2_C DualSPSched; !- Control 1 Name @@ -29955,6 +29965,7 @@ rm2_1_C Thermostat, !- Name rm2_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_1_C DualSPSched; !- Control 1 Name @@ -29971,6 +29982,7 @@ rm2_2_C Thermostat, !- Name rm2_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_2_C DualSPSched; !- Control 1 Name @@ -29987,6 +29999,7 @@ rm2_3_C Thermostat, !- Name rm2_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_3_C DualSPSched; !- Control 1 Name @@ -30003,6 +30016,7 @@ rm2_4_C Thermostat, !- Name rm2_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_4_C DualSPSched; !- Control 1 Name @@ -30019,6 +30033,7 @@ rm2_5_C Thermostat, !- Name rm2_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_5_C DualSPSched; !- Control 1 Name @@ -30035,6 +30050,7 @@ rm2_6_C Thermostat, !- Name rm2_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_6_C DualSPSched; !- Control 1 Name @@ -30051,6 +30067,7 @@ rm2_7_C Thermostat, !- Name rm2_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_7_C DualSPSched; !- Control 1 Name @@ -30067,6 +30084,7 @@ rm2_8_C Thermostat, !- Name rm2_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_8_C DualSPSched; !- Control 1 Name @@ -30083,6 +30101,7 @@ rm2_9_C Thermostat, !- Name rm2_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_9_C DualSPSched; !- Control 1 Name @@ -30099,6 +30118,7 @@ rm2_10_C Thermostat, !- Name rm2_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm2_10_C DualSPSched; !- Control 1 Name @@ -31105,6 +31125,7 @@ rm3_1_C Thermostat, !- Name rm3_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_1_C DualSPSched; !- Control 1 Name @@ -31121,6 +31142,7 @@ rm3_2_C Thermostat, !- Name rm3_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_2_C DualSPSched; !- Control 1 Name @@ -31137,6 +31159,7 @@ rm3_3_C Thermostat, !- Name rm3_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_3_C DualSPSched; !- Control 1 Name @@ -31153,6 +31176,7 @@ rm3_4_C Thermostat, !- Name rm3_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_4_C DualSPSched; !- Control 1 Name @@ -31169,6 +31193,7 @@ rm3_5_C Thermostat, !- Name rm3_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_5_C DualSPSched; !- Control 1 Name @@ -31185,6 +31210,7 @@ rm3_6_C Thermostat, !- Name rm3_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_6_C DualSPSched; !- Control 1 Name @@ -31201,6 +31227,7 @@ rm3_7_C Thermostat, !- Name rm3_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_7_C DualSPSched; !- Control 1 Name @@ -31217,6 +31244,7 @@ rm3_8_C Thermostat, !- Name rm3_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_8_C DualSPSched; !- Control 1 Name @@ -31233,6 +31261,7 @@ rm3_9_C Thermostat, !- Name rm3_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_9_C DualSPSched; !- Control 1 Name @@ -31249,6 +31278,7 @@ rm3_10_C Thermostat, !- Name rm3_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm3_10_C DualSPSched; !- Control 1 Name @@ -32255,6 +32285,7 @@ rm4_1_C Thermostat, !- Name rm4_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_1_C DualSPSched; !- Control 1 Name @@ -32271,6 +32302,7 @@ rm4_2_C Thermostat, !- Name rm4_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_2_C DualSPSched; !- Control 1 Name @@ -32287,6 +32319,7 @@ rm4_3_C Thermostat, !- Name rm4_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_3_C DualSPSched; !- Control 1 Name @@ -32303,6 +32336,7 @@ rm4_4_C Thermostat, !- Name rm4_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_4_C DualSPSched; !- Control 1 Name @@ -32319,6 +32353,7 @@ rm4_5_C Thermostat, !- Name rm4_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_5_C DualSPSched; !- Control 1 Name @@ -32335,6 +32370,7 @@ rm4_6_C Thermostat, !- Name rm4_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_6_C DualSPSched; !- Control 1 Name @@ -32351,6 +32387,7 @@ rm4_7_C Thermostat, !- Name rm4_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_7_C DualSPSched; !- Control 1 Name @@ -32367,6 +32404,7 @@ rm4_8_C Thermostat, !- Name rm4_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_8_C DualSPSched; !- Control 1 Name @@ -32383,6 +32421,7 @@ rm4_9_C Thermostat, !- Name rm4_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_9_C DualSPSched; !- Control 1 Name @@ -32399,6 +32438,7 @@ rm4_10_C Thermostat, !- Name rm4_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm4_10_C DualSPSched; !- Control 1 Name @@ -33755,6 +33795,7 @@ rm5_1_C Thermostat, !- Name rm5_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_1_C DualSPSched; !- Control 1 Name @@ -33771,6 +33812,7 @@ rm5_2_C Thermostat, !- Name rm5_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_2_C DualSPSched; !- Control 1 Name @@ -33787,6 +33829,7 @@ rm5_3_C Thermostat, !- Name rm5_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_3_C DualSPSched; !- Control 1 Name @@ -33803,6 +33846,7 @@ rm5_4_C Thermostat, !- Name rm5_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_4_C DualSPSched; !- Control 1 Name @@ -33819,6 +33863,7 @@ rm5_5_C Thermostat, !- Name rm5_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_5_C DualSPSched; !- Control 1 Name @@ -33835,6 +33880,7 @@ rm5_6_C Thermostat, !- Name rm5_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_6_C DualSPSched; !- Control 1 Name @@ -33851,6 +33897,7 @@ rm5_7_C Thermostat, !- Name rm5_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_7_C DualSPSched; !- Control 1 Name @@ -33867,6 +33914,7 @@ rm5_8_C Thermostat, !- Name rm5_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_8_C DualSPSched; !- Control 1 Name @@ -33883,6 +33931,7 @@ rm5_9_C Thermostat, !- Name rm5_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_9_C DualSPSched; !- Control 1 Name @@ -33899,6 +33948,7 @@ rm5_10_C Thermostat, !- Name rm5_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm5_10_C DualSPSched; !- Control 1 Name @@ -35255,6 +35305,7 @@ rm6_1_C Thermostat, !- Name rm6_1_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_1_C DualSPSched; !- Control 1 Name @@ -35271,6 +35322,7 @@ rm6_2_C Thermostat, !- Name rm6_2_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_2_C DualSPSched; !- Control 1 Name @@ -35287,6 +35339,7 @@ rm6_3_C Thermostat, !- Name rm6_3_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_3_C DualSPSched; !- Control 1 Name @@ -35303,6 +35356,7 @@ rm6_4_C Thermostat, !- Name rm6_4_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_4_C DualSPSched; !- Control 1 Name @@ -35319,6 +35373,7 @@ rm6_5_C Thermostat, !- Name rm6_5_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_5_C DualSPSched; !- Control 1 Name @@ -35335,6 +35390,7 @@ rm6_6_C Thermostat, !- Name rm6_6_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_6_C DualSPSched; !- Control 1 Name @@ -35351,6 +35407,7 @@ rm6_7_C Thermostat, !- Name rm6_7_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_7_C DualSPSched; !- Control 1 Name @@ -35367,6 +35424,7 @@ rm6_8_C Thermostat, !- Name rm6_8_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_8_C DualSPSched; !- Control 1 Name @@ -35383,6 +35441,7 @@ rm6_9_C Thermostat, !- Name rm6_9_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_9_C DualSPSched; !- Control 1 Name @@ -35399,6 +35458,7 @@ rm6_10_C Thermostat, !- Name rm6_10_C, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type rm6_10_C DualSPSched; !- Control 1 Name diff --git a/performance_tests/Inactive/benchmarklargeofficenew_usa_ca_san_francisco.idf b/performance_tests/Inactive/benchmarklargeofficenew_usa_ca_san_francisco.idf index 08631555636..839ffc41909 100644 --- a/performance_tests/Inactive/benchmarklargeofficenew_usa_ca_san_francisco.idf +++ b/performance_tests/Inactive/benchmarklargeofficenew_usa_ca_san_francisco.idf @@ -2082,6 +2082,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2491,6 +2492,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2900,6 +2902,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3325,6 +3328,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3695,6 +3699,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -4065,6 +4070,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4435,6 +4441,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4805,6 +4812,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5175,6 +5183,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5545,6 +5554,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5915,6 +5925,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6285,6 +6296,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6655,6 +6667,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7025,6 +7038,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7395,6 +7409,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/performance_tests/PipingSystem_Underground_FHX.idf b/performance_tests/PipingSystem_Underground_FHX.idf index 9d4b3bd16b5..2670186d5e5 100644 --- a/performance_tests/PipingSystem_Underground_FHX.idf +++ b/performance_tests/PipingSystem_Underground_FHX.idf @@ -293,6 +293,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement Dual SP Control;!- Control 1 Name @@ -305,6 +306,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Floor Dual SP Control; !- Control 1 Name diff --git a/src/EnergyPlus/DataZoneControls.hh b/src/EnergyPlus/DataZoneControls.hh index 1896a986f68..9df69f8622c 100644 --- a/src/EnergyPlus/DataZoneControls.hh +++ b/src/EnergyPlus/DataZoneControls.hh @@ -156,7 +156,7 @@ namespace DataZoneControls { : ActualZoneNum(0), ManageDemand(false), HeatingResetLimit(0.0), CoolingResetLimit(0.0), EMSOverrideHeatingSetPointOn(false), EMSOverrideHeatingSetPointValue(0.0), EMSOverrideCoolingSetPointOn(false), EMSOverrideCoolingSetPointValue(0.0), FixedRadiativeFraction(0.0), AdaptiveComfortTempControl(false), AdaptiveComfortModelTypeIndex(0), ZoneOvercoolRange(0.0), - ZoneOvercoolConstRange(0.0), ZoneOvercoolControlRatio(0.0), DeltaTCutSet(0), ZoneThermostatSetPointHi(0.0), + ZoneOvercoolConstRange(0.0), ZoneOvercoolControlRatio(0.0), DeltaTCutSet(0.0), ZoneThermostatSetPointHi(0.0), ZoneThermostatSetPointLo(0.0), CoolModeLast(false), HeatModeLast(false), CoolModeLastSave(false), HeatModeLastSave(false), CoolOffFlag(false), HeatOffFlag(false) diff --git a/src/EnergyPlus/ZoneTempPredictorCorrector.cc b/src/EnergyPlus/ZoneTempPredictorCorrector.cc index a7cf4ffb8b2..fa29faa13d6 100644 --- a/src/EnergyPlus/ZoneTempPredictorCorrector.cc +++ b/src/EnergyPlus/ZoneTempPredictorCorrector.cc @@ -462,6 +462,24 @@ void GetZoneAirSetPoints(EnergyPlusData &state) } } + if (NumNums > 0) { + if (s_ipsc->rNumericArgs(1) >= 0.0) { + tempZone.DeltaTCutSet = s_ipsc->rNumericArgs(1); + if (s_ipsc->rNumericArgs(1) > 0.0) { + s_ztpc->NumOnOffCtrZone++; + } + } else { + ShowSevereError(state, + std::format("{}=\"{} invalid {}=[{:.0f}].", + s_ipsc->cCurrentModuleObject, + s_ipsc->cAlphaArgs(1), + s_ipsc->cNumericFieldNames(1), + s_ipsc->rNumericArgs(1))); + ShowContinueError(state, "..Allowable values must be greater or equal to 0"); + ErrorsFound = true; + } + } + if (s_ipsc->lAlphaFieldBlanks(7)) { NumAlphas = 5; } else if (s_ipsc->lAlphaFieldBlanks(9)) { @@ -493,24 +511,6 @@ void GetZoneAirSetPoints(EnergyPlusData &state) tempZone.setpts[(int)setptType].isUsed = true; } - if (NumNums > 0) { - if (s_ipsc->rNumericArgs(1) >= 0.0) { - tempZone.DeltaTCutSet = s_ipsc->rNumericArgs(1); - if (s_ipsc->rNumericArgs(1) > 0.0) { - s_ztpc->NumOnOffCtrZone++; - } - } else { - ShowSevereError(state, - std::format("{}=\"{} invalid {}=[{:.0f}].", - s_ipsc->cCurrentModuleObject, - s_ipsc->cAlphaArgs(1), - s_ipsc->cNumericFieldNames(1), - s_ipsc->rNumericArgs(1))); - ShowContinueError(state, "..Allowable values must be greater or equal to 0"); - ErrorsFound = true; - } - } - if (tempZone.DeltaTCutSet > 0.0 && !tempZone.setpts[(int)HVAC::SetptType::SingleHeatCool].Name.empty()) { ShowWarningError(state, std::format("{}=\"{}: The choice of Temperature Difference Between Cutout And Setpoint will not be applied " diff --git a/src/ExpandObjects/epfilter.f90 b/src/ExpandObjects/epfilter.f90 index 809c1e12a49..67557073c67 100644 --- a/src/ExpandObjects/epfilter.f90 +++ b/src/ExpandObjects/epfilter.f90 @@ -8973,6 +8973,7 @@ SUBROUTINE CreateNewVAV CALL AddToObjFld('Zone or ZoneList Name', base + vzNameOff,' ') !this schedule was previously created CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + vzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -9460,6 +9461,7 @@ SUBROUTINE CreateNewVAV CALL AddToObjFld('Name', base + fpvzNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + fpvzNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + fpvzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -9942,6 +9944,7 @@ SUBROUTINE CreateNewVAV CALL AddToObjFld('Zone or ZoneList Name', base + hcvzNameOff,' ') !this schedule was previously created CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + hcvzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -13529,6 +13532,7 @@ SUBROUTINE CreateNewUnitary CALL AddToObjFld('Zone or ZoneList Name', base + uzNameOff,' ') !this schedule was previously created CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + uzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -18887,6 +18891,7 @@ SUBROUTINE CreateNewConstVol CALL AddToObjFld('Zone or ZoneList Name', base + cvzNameOff,' ') !this schedule was previously created CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + cvzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -20824,6 +20829,7 @@ SUBROUTINE CreateNewDualDuct CALL AddToObjFld('Zone or ZoneList Name', base + ddzNameOff,' ') !this schedule was previously created CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + ddzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -22934,6 +22940,7 @@ SUBROUTINE CreateNewVRF CALL AddToObjFld('Name', base + vrfzNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + vrfzNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + vrfzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -23984,6 +23991,7 @@ SUBROUTINE CreateFanCoil CALL AddToObjFld('Name', base + fczNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + fczNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + fczTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -24655,6 +24663,7 @@ SUBROUTINE CreatePurchasedAir CALL AddToObjFld('Name', base + pazNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + pazNameOff,' ') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + pazTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -24910,6 +24919,7 @@ SUBROUTINE CreateBaseboard CALL AddToObjFld('Name', base + bbzNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + bbzNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + bbzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -25219,6 +25229,7 @@ SUBROUTINE CreatePTAC CALL AddToObjFld('Name', base + ptaczNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + ptaczNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + ptaczTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -25827,6 +25838,7 @@ SUBROUTINE CreatePTHP CALL AddToObjFld('Name', base + pthpzNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + pthpzNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + pthpzTStatNameOff,' Dual SP Control',.TRUE.) END IF @@ -30199,6 +30211,7 @@ SUBROUTINE CreateWaterAirHP CALL AddToObjFld('Name', base + wahpNameOff,' Thermostat') CALL AddToObjFld('Zone or ZoneList Name', base + wahpNameOff,'') CALL AddToObjStr('Control Type Schedule Name','HVACTemplate-Always 4') + CALL AddToObjStr('Temperature Difference Between Cutout And Setpoint','') CALL AddToObjStr('Control Object Type','ThermostatSetpoint:DualSetpoint') CALL AddToObjFld('Control Name', base + wahpTStatNameOff,' Dual SP Control',.TRUE.) END IF diff --git a/src/Transition/CreateNewIDFUsingRulesV27_1_0.f90 b/src/Transition/CreateNewIDFUsingRulesV27_1_0.f90 index 5567d150793..9c081260bbd 100644 --- a/src/Transition/CreateNewIDFUsingRulesV27_1_0.f90 +++ b/src/Transition/CreateNewIDFUsingRulesV27_1_0.f90 @@ -461,6 +461,19 @@ SUBROUTINE CreateNewIDFUsingRules(EndOfFile,DiffOnly,InLfn,AskForInput,InputFile ! If your original object starts with Z, insert the rules here + CASE('ZONECONTROL:THERMOSTAT') + CALL GetNewObjectDefInIDD(ObjectName,NwNumArgs,NwAorN,NwReqFld,NwObjMinFlds,NwFldNames,NwFldDefaults,NwFldUnits) + OutArgs(1:3)=InArgs(1:3) + IF (CurArgs .EQ. 12) THEN + OutArgs(4)=InArgs(CurArgs) + OutArgs(5:CurArgs)=InArgs(4:CurArgs - 1) + ELSE + OutArgs(4)=' ' + OutArgs(5:CurArgs + 1)=InArgs(4:CurArgs) + CurArgs = CurArgs + 1 + ENDIF + nodiff=.false. + CASE('ZONEHVAC:EVAPORATIVECOOLERUNIT') CALL GetNewObjectDefInIDD(ObjectName,NwNumArgs,NwAorN,NwReqFld,NwObjMinFlds,NwFldNames,NwFldDefaults,NwFldUnits) OutArgs(1:CurArgs)=InArgs(1:CurArgs) diff --git a/src/Transition/InputRulesFiles/Rules26-2-0-to-27-1-0.md b/src/Transition/InputRulesFiles/Rules26-2-0-to-27-1-0.md index 4071c6a2a25..443116dc0da 100644 --- a/src/Transition/InputRulesFiles/Rules26-2-0-to-27-1-0.md +++ b/src/Transition/InputRulesFiles/Rules26-2-0-to-27-1-0.md @@ -15,3 +15,9 @@ Change object name to EvaporativeCooler:Indirect:UserEffectiveness Rename field N4 which is also F7, from "Water Pump Power Sizing Factor" to "Design Water Pump Power Per Unit Flow Rate" See pull request [#11814](https://github.com/NatLabRockies/EnergyPlus/pull/11814) + +# Object Change: ZoneControl:Thermostat + +Last field (N1 at F12) moved to F4 as N1 + +See pull request [#11822](https://github.com/NatLabRockies/EnergyPlus/pull/11822) diff --git a/src/Transition/tests/27_1_0/test_zone_control_thermostat.py b/src/Transition/tests/27_1_0/test_zone_control_thermostat.py new file mode 100644 index 00000000000..7256ecda0e3 --- /dev/null +++ b/src/Transition/tests/27_1_0/test_zone_control_thermostat.py @@ -0,0 +1,134 @@ +# EnergyPlus, Copyright (c) 1996-present, The Board of Trustees of the +# University of Illinois, The Regents of the University of California, through +# Lawrence Berkeley National Laboratory (subject to receipt of any required +# approvals from the U.S. Dept. of Energy), Oak Ridge National Laboratory, +# managed by UT-Battelle, Alliance for Energy Innovation, LLC, and other +# contributors. All rights reserved. +# +# NOTICE: This Software was developed under funding from the U.S. Department of +# Energy and the U.S. Government consequently retains certain rights. As such, +# the U.S. Government has been granted for itself and others acting on its +# behalf a paid-up, nonexclusive, irrevocable, worldwide license in the +# Software to reproduce, distribute copies to the public, prepare derivative +# works, and perform publicly and display publicly, and to permit others to do +# so. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# (1) Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# (2) Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# (3) Neither the name of the University of California, Lawrence Berkeley +# National Laboratory, the University of Illinois, U.S. Dept. of Energy nor +# the names of its contributors may be used to endorse or promote products +# derived from this software without specific prior written permission. +# +# (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in +# stand-alone form without changes from the version obtained under this +# License, or (ii) Licensee makes a reference solely to the software +# portion of its product, Licensee must refer to the software as +# "EnergyPlus version X" software, where "X" is the version number Licensee +# obtained under this License and may not use a different name for the +# software. Except as specifically required in this Section (4), Licensee +# shall not use in a company name, a product name, in advertising, +# publicity, or other promotional activities any name, trade name, +# trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or +# confusingly similar designation, without the U.S. Department of Energy's +# prior written consent. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. + + +def run_transition(prepare_and_run_transition, idf_text: str, expected_idf_text: str): + prepare_and_run_transition( + ori_idf_text=idf_text, + expected_idf_text=expected_idf_text, + version_ori=(26, 2, 0), + version_new=(27, 1, 0), + ) + + +def test_zone_control_thermostat_without_cutout_inserts_blank_before_all_control_pairs(prepare_and_run_transition): + idf_text = """ + ZoneControl:Thermostat, + Four Controls No Cutout, + Zone One, + Control Schedule, + ThermostatSetpoint:SingleHeating, + Heating Setpoint, + ThermostatSetpoint:SingleCooling, + Cooling Setpoint, + ThermostatSetpoint:SingleHeatingOrCooling, + Combined Setpoint, + ThermostatSetpoint:DualSetpoint, + Dual Setpoint; + """ + + expected_idf_text = """ + ZoneControl:Thermostat, + Four Controls No Cutout, !- Name + Zone One, !- Zone or ZoneList Name + Control Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} + ThermostatSetpoint:SingleHeating, !- Control 1 Object Type + Heating Setpoint, !- Control 1 Name + ThermostatSetpoint:SingleCooling, !- Control 2 Object Type + Cooling Setpoint, !- Control 2 Name + ThermostatSetpoint:SingleHeatingOrCooling, !- Control 3 Object Type + Combined Setpoint, !- Control 3 Name + ThermostatSetpoint:DualSetpoint, !- Control 4 Object Type + Dual Setpoint; !- Control 4 Name +""" + + run_transition(prepare_and_run_transition, idf_text, expected_idf_text) + + +def test_zone_control_thermostat_moves_legacy_cutout_before_all_control_pairs(prepare_and_run_transition): + idf_text = """ + ZoneControl:Thermostat, + Four Controls With Cutout, + Zone Two, + Control Schedule, + ThermostatSetpoint:SingleHeating, + Heating Setpoint, + ThermostatSetpoint:SingleCooling, + Cooling Setpoint, + ThermostatSetpoint:SingleHeatingOrCooling, + Combined Setpoint, + ThermostatSetpoint:DualSetpoint, + Dual Setpoint, + 1.25; + """ + + expected_idf_text = """ + ZoneControl:Thermostat, + Four Controls With Cutout, !- Name + Zone Two, !- Zone or ZoneList Name + Control Schedule, !- Control Type Schedule Name + 1.25, !- Temperature Difference Between Cutout And Setpoint {deltaC} + ThermostatSetpoint:SingleHeating, !- Control 1 Object Type + Heating Setpoint, !- Control 1 Name + ThermostatSetpoint:SingleCooling, !- Control 2 Object Type + Cooling Setpoint, !- Control 2 Name + ThermostatSetpoint:SingleHeatingOrCooling, !- Control 3 Object Type + Combined Setpoint, !- Control 3 Name + ThermostatSetpoint:DualSetpoint, !- Control 4 Object Type + Dual Setpoint; !- Control 4 Name +""" + + run_transition(prepare_and_run_transition, idf_text, expected_idf_text) diff --git a/testfiles/1ZoneDataCenterCRAC_wApproachTemp.idf b/testfiles/1ZoneDataCenterCRAC_wApproachTemp.idf index 08836e59d62..764272c12ac 100644 --- a/testfiles/1ZoneDataCenterCRAC_wApproachTemp.idf +++ b/testfiles/1ZoneDataCenterCRAC_wApproachTemp.idf @@ -760,6 +760,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/1ZoneDataCenterCRAC_wApproachTemp_ClassH1.idf b/testfiles/1ZoneDataCenterCRAC_wApproachTemp_ClassH1.idf index beb197bcdbc..b347e74edbd 100644 --- a/testfiles/1ZoneDataCenterCRAC_wApproachTemp_ClassH1.idf +++ b/testfiles/1ZoneDataCenterCRAC_wApproachTemp_ClassH1.idf @@ -760,6 +760,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/1ZoneDataCenterCRAC_wPumpedDXCoolingCoil.idf b/testfiles/1ZoneDataCenterCRAC_wPumpedDXCoolingCoil.idf index f8ce94b7f4e..e2ba4545db3 100644 --- a/testfiles/1ZoneDataCenterCRAC_wPumpedDXCoolingCoil.idf +++ b/testfiles/1ZoneDataCenterCRAC_wPumpedDXCoolingCoil.idf @@ -760,6 +760,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/1ZoneEvapCooler.idf b/testfiles/1ZoneEvapCooler.idf index d331957b969..9d288ada8ab 100644 --- a/testfiles/1ZoneEvapCooler.idf +++ b/testfiles/1ZoneEvapCooler.idf @@ -567,6 +567,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint; !- Control 1 Name diff --git a/testfiles/1ZoneEvapCooler_4Win_incidentSolarMultiplier.idf b/testfiles/1ZoneEvapCooler_4Win_incidentSolarMultiplier.idf index abd94a2b171..8ba0046f67e 100644 --- a/testfiles/1ZoneEvapCooler_4Win_incidentSolarMultiplier.idf +++ b/testfiles/1ZoneEvapCooler_4Win_incidentSolarMultiplier.idf @@ -653,6 +653,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint; !- Control 1 Name diff --git a/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage.idf b/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage.idf index 18ba8851a1e..2c6d85d9634 100644 --- a/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage.idf +++ b/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage.idf @@ -657,6 +657,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint; !- Control 1 Name diff --git a/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage_naturalVent.idf b/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage_naturalVent.idf index e72f88ad77c..2df5016494f 100644 --- a/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage_naturalVent.idf +++ b/testfiles/1ZoneEvapCooler_ReportPeriodPowerOutage_naturalVent.idf @@ -698,6 +698,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint; !- Control 1 Name diff --git a/testfiles/1ZoneParameterAspect.idf b/testfiles/1ZoneParameterAspect.idf index 1422c39072c..b819a300c57 100644 --- a/testfiles/1ZoneParameterAspect.idf +++ b/testfiles/1ZoneParameterAspect.idf @@ -592,6 +592,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint; !- Control 1 Name diff --git a/testfiles/2ZoneDataCenterHVAC_wEconomizer.idf b/testfiles/2ZoneDataCenterHVAC_wEconomizer.idf index 31826d0d2f0..ae7eca2dcde 100644 --- a/testfiles/2ZoneDataCenterHVAC_wEconomizer.idf +++ b/testfiles/2ZoneDataCenterHVAC_wEconomizer.idf @@ -3081,6 +3081,7 @@ West Zone Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -3088,6 +3089,7 @@ East Zone Thermostat, !- Name East Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/2ZoneDataCenterHVAC_wEconomizer_ClassA1A2.idf b/testfiles/2ZoneDataCenterHVAC_wEconomizer_ClassA1A2.idf index 903263e9f4a..9d7e6f86707 100644 --- a/testfiles/2ZoneDataCenterHVAC_wEconomizer_ClassA1A2.idf +++ b/testfiles/2ZoneDataCenterHVAC_wEconomizer_ClassA1A2.idf @@ -3072,6 +3072,7 @@ West Zone Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -3079,6 +3080,7 @@ East Zone Thermostat, !- Name East Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/4ZoneWithShading_Simple_1.idf b/testfiles/4ZoneWithShading_Simple_1.idf index ea890cead58..847c292cd1c 100644 --- a/testfiles/4ZoneWithShading_Simple_1.idf +++ b/testfiles/4ZoneWithShading_Simple_1.idf @@ -1042,6 +1042,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 SETPOINTS; !- Control 1 Name @@ -1105,6 +1106,7 @@ ZONE 2 CONTROLS, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 SETPOINTS; !- Control 1 Name @@ -1168,6 +1170,7 @@ ZONE 3 CONTROLS, !- Name ZONE 3, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 SETPOINTS; !- Control 1 Name @@ -1231,6 +1234,7 @@ ZONE 4 CONTROLS, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 SETPOINTS; !- Control 1 Name diff --git a/testfiles/4ZoneWithShading_Simple_2.idf b/testfiles/4ZoneWithShading_Simple_2.idf index cf90b336747..a5ae97c46f4 100644 --- a/testfiles/4ZoneWithShading_Simple_2.idf +++ b/testfiles/4ZoneWithShading_Simple_2.idf @@ -1002,6 +1002,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 SETPOINTS; !- Control 1 Name @@ -1065,6 +1066,7 @@ ZONE 2 CONTROLS, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 SETPOINTS; !- Control 1 Name @@ -1128,6 +1130,7 @@ ZONE 3 CONTROLS, !- Name ZONE 3, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 SETPOINTS; !- Control 1 Name @@ -1191,6 +1194,7 @@ ZONE 4 CONTROLS, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 SETPOINTS; !- Control 1 Name diff --git a/testfiles/5ZoneAirCooled.idf b/testfiles/5ZoneAirCooled.idf index 8a6fc6a0b0e..53cd3fe821e 100644 --- a/testfiles/5ZoneAirCooled.idf +++ b/testfiles/5ZoneAirCooled.idf @@ -2153,6 +2153,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2164,6 +2165,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2175,6 +2177,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2186,6 +2189,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2197,6 +2201,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledConvCoef.idf b/testfiles/5ZoneAirCooledConvCoef.idf index c81562fceb2..d0cc85362f6 100644 --- a/testfiles/5ZoneAirCooledConvCoef.idf +++ b/testfiles/5ZoneAirCooledConvCoef.idf @@ -2263,6 +2263,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2274,6 +2275,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2285,6 +2287,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2296,6 +2299,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2307,6 +2311,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledConvCoef_VSFan.idf b/testfiles/5ZoneAirCooledConvCoef_VSFan.idf index 781fdf98c24..15065de4421 100644 --- a/testfiles/5ZoneAirCooledConvCoef_VSFan.idf +++ b/testfiles/5ZoneAirCooledConvCoef_VSFan.idf @@ -2263,6 +2263,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2274,6 +2275,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2285,6 +2287,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2296,6 +2299,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2307,6 +2311,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledDemandLimiting.idf b/testfiles/5ZoneAirCooledDemandLimiting.idf index 33a30114020..ff9ae6b47ff 100644 --- a/testfiles/5ZoneAirCooledDemandLimiting.idf +++ b/testfiles/5ZoneAirCooledDemandLimiting.idf @@ -2106,6 +2106,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledDemandLimiting_FixedRateVentilation.idf b/testfiles/5ZoneAirCooledDemandLimiting_FixedRateVentilation.idf index 1f787f8e417..6340ecdb691 100644 --- a/testfiles/5ZoneAirCooledDemandLimiting_FixedRateVentilation.idf +++ b/testfiles/5ZoneAirCooledDemandLimiting_FixedRateVentilation.idf @@ -2107,6 +2107,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledDemandLimiting_ReductionRatioVentilation.idf b/testfiles/5ZoneAirCooledDemandLimiting_ReductionRatioVentilation.idf index 8ae152d8276..be02e1c3a90 100644 --- a/testfiles/5ZoneAirCooledDemandLimiting_ReductionRatioVentilation.idf +++ b/testfiles/5ZoneAirCooledDemandLimiting_ReductionRatioVentilation.idf @@ -2107,6 +2107,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledKeepSiteLocation.idf b/testfiles/5ZoneAirCooledKeepSiteLocation.idf index f35c32a5d2c..4d226f22535 100644 --- a/testfiles/5ZoneAirCooledKeepSiteLocation.idf +++ b/testfiles/5ZoneAirCooledKeepSiteLocation.idf @@ -2155,6 +2155,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2166,6 +2167,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2177,6 +2179,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2188,6 +2191,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2199,6 +2203,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithCoupledInGradeSlab.idf b/testfiles/5ZoneAirCooledWithCoupledInGradeSlab.idf index 3f17c0c2ebb..dc9ed370eeb 100644 --- a/testfiles/5ZoneAirCooledWithCoupledInGradeSlab.idf +++ b/testfiles/5ZoneAirCooledWithCoupledInGradeSlab.idf @@ -2269,6 +2269,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2280,6 +2281,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2291,6 +2293,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2305,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2313,6 +2317,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithCoupledInGradeSlab_HorizInsThickness.idf b/testfiles/5ZoneAirCooledWithCoupledInGradeSlab_HorizInsThickness.idf index 0d6b5fa51d2..ee9c0e801a2 100644 --- a/testfiles/5ZoneAirCooledWithCoupledInGradeSlab_HorizInsThickness.idf +++ b/testfiles/5ZoneAirCooledWithCoupledInGradeSlab_HorizInsThickness.idf @@ -2282,6 +2282,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2293,6 +2294,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2304,6 +2306,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2315,6 +2318,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2326,6 +2330,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithDOASAirLoop.idf b/testfiles/5ZoneAirCooledWithDOASAirLoop.idf index 640f4fbe5eb..6ea598c38c2 100644 --- a/testfiles/5ZoneAirCooledWithDOASAirLoop.idf +++ b/testfiles/5ZoneAirCooledWithDOASAirLoop.idf @@ -2169,6 +2169,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2180,6 +2181,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2191,6 +2193,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2202,6 +2205,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2213,6 +2217,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithDOASAirLoop_ExhaustSystem.idf b/testfiles/5ZoneAirCooledWithDOASAirLoop_ExhaustSystem.idf index 45bc2e1033f..20399d4d7af 100644 --- a/testfiles/5ZoneAirCooledWithDOASAirLoop_ExhaustSystem.idf +++ b/testfiles/5ZoneAirCooledWithDOASAirLoop_ExhaustSystem.idf @@ -2150,6 +2150,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2161,6 +2162,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2172,6 +2174,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2183,6 +2186,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2194,6 +2198,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithSlab.idf b/testfiles/5ZoneAirCooledWithSlab.idf index a03d94b6777..27dc9bfbfb3 100644 --- a/testfiles/5ZoneAirCooledWithSlab.idf +++ b/testfiles/5ZoneAirCooledWithSlab.idf @@ -2327,6 +2327,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2338,6 +2339,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2349,6 +2351,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2360,6 +2363,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2371,6 +2375,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithSpaceHeatBalance.idf b/testfiles/5ZoneAirCooledWithSpaceHeatBalance.idf index e3606fb3fca..a2f49b24e24 100644 --- a/testfiles/5ZoneAirCooledWithSpaceHeatBalance.idf +++ b/testfiles/5ZoneAirCooledWithSpaceHeatBalance.idf @@ -2158,6 +2158,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2169,6 +2170,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2180,6 +2182,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2191,6 +2194,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2202,6 +2206,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithSpaces.idf b/testfiles/5ZoneAirCooledWithSpaces.idf index d3f566748e0..eab9cfedab8 100644 --- a/testfiles/5ZoneAirCooledWithSpaces.idf +++ b/testfiles/5ZoneAirCooledWithSpaces.idf @@ -2633,6 +2633,7 @@ Zone 1 Control, !- Name Zone 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2644,6 +2645,7 @@ Zone 2 Control, !- Name Zone 2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2655,6 +2657,7 @@ Zone 3 Control, !- Name Zone 3, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2666,6 +2669,7 @@ Zone 4 Control, !- Name Zone 4, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2677,6 +2681,7 @@ Zone 5 Control, !- Name Zone 5, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithSpacesDaylightingIntMass.idf b/testfiles/5ZoneAirCooledWithSpacesDaylightingIntMass.idf index 06ee5066139..3fc413cd79f 100644 --- a/testfiles/5ZoneAirCooledWithSpacesDaylightingIntMass.idf +++ b/testfiles/5ZoneAirCooledWithSpacesDaylightingIntMass.idf @@ -2663,6 +2663,7 @@ Zone 1 Control, !- Name Zone 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2674,6 +2675,7 @@ Zone 2 Control, !- Name Zone 2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2685,6 +2687,7 @@ Zone 3 Control, !- Name Zone 3, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2696,6 +2699,7 @@ Zone 4 Control, !- Name Zone 4, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2707,6 +2711,7 @@ Zone 5 Control, !- Name Zone 5, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooledWithSpacesHVAC.idf b/testfiles/5ZoneAirCooledWithSpacesHVAC.idf index 10aab260ad6..40bd52b5e09 100644 --- a/testfiles/5ZoneAirCooledWithSpacesHVAC.idf +++ b/testfiles/5ZoneAirCooledWithSpacesHVAC.idf @@ -2616,6 +2616,7 @@ Zone 1 Control, !- Name Zone 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2627,6 +2628,7 @@ Zone 2 Control, !- Name Zone 2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2638,6 +2640,7 @@ Zone 3 Control, !- Name Zone 3, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2649,6 +2652,7 @@ Zone 4 Control, !- Name Zone 4, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2660,6 +2664,7 @@ Zone 5 Control, !- Name Zone 5, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_AirBoundaries.idf b/testfiles/5ZoneAirCooled_AirBoundaries.idf index dd86c26b49f..c4f030e86c1 100644 --- a/testfiles/5ZoneAirCooled_AirBoundaries.idf +++ b/testfiles/5ZoneAirCooled_AirBoundaries.idf @@ -2159,6 +2159,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2170,6 +2171,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2181,6 +2183,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2192,6 +2195,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2203,6 +2207,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_AirBoundaries_Daylighting.idf b/testfiles/5ZoneAirCooled_AirBoundaries_Daylighting.idf index ff3ceb2f8da..32a62802c83 100644 --- a/testfiles/5ZoneAirCooled_AirBoundaries_Daylighting.idf +++ b/testfiles/5ZoneAirCooled_AirBoundaries_Daylighting.idf @@ -2225,6 +2225,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2236,6 +2237,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2247,6 +2249,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2258,6 +2261,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2269,6 +2273,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_LatentSizing_OtherEquipmentLatentLoads.idf b/testfiles/5ZoneAirCooled_LatentSizing_OtherEquipmentLatentLoads.idf index 17ead134c6a..9afaa661e98 100644 --- a/testfiles/5ZoneAirCooled_LatentSizing_OtherEquipmentLatentLoads.idf +++ b/testfiles/5ZoneAirCooled_LatentSizing_OtherEquipmentLatentLoads.idf @@ -2246,6 +2246,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2257,6 +2258,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2268,6 +2270,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2279,6 +2282,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2290,6 +2294,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_RunaroundHeatRecovery.idf b/testfiles/5ZoneAirCooled_RunaroundHeatRecovery.idf index 0bee959e2b7..364681b14e6 100644 --- a/testfiles/5ZoneAirCooled_RunaroundHeatRecovery.idf +++ b/testfiles/5ZoneAirCooled_RunaroundHeatRecovery.idf @@ -2532,6 +2532,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2543,6 +2544,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2554,6 +2556,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2565,6 +2568,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2576,6 +2580,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_UniformLoading.idf b/testfiles/5ZoneAirCooled_UniformLoading.idf index fa954c8c049..ecbb203a6b4 100644 --- a/testfiles/5ZoneAirCooled_UniformLoading.idf +++ b/testfiles/5ZoneAirCooled_UniformLoading.idf @@ -2215,6 +2215,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2226,6 +2227,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2237,6 +2239,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2248,6 +2251,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2259,6 +2263,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_VAVBoxMinAirFlowTurnDown.idf b/testfiles/5ZoneAirCooled_VAVBoxMinAirFlowTurnDown.idf index a624d7624f8..2ec901426ae 100644 --- a/testfiles/5ZoneAirCooled_VAVBoxMinAirFlowTurnDown.idf +++ b/testfiles/5ZoneAirCooled_VAVBoxMinAirFlowTurnDown.idf @@ -2335,6 +2335,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2346,6 +2347,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2357,6 +2359,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2368,6 +2371,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2379,6 +2383,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_VRPSizing.idf b/testfiles/5ZoneAirCooled_VRPSizing.idf index c316b3d0819..52f4e6996d5 100644 --- a/testfiles/5ZoneAirCooled_VRPSizing.idf +++ b/testfiles/5ZoneAirCooled_VRPSizing.idf @@ -2259,6 +2259,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2270,6 +2271,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2281,6 +2283,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2292,6 +2295,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2303,6 +2307,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_VRPSizing_MaxZd.idf b/testfiles/5ZoneAirCooled_VRPSizing_MaxZd.idf index 78192f675dd..6f049b0f8d5 100644 --- a/testfiles/5ZoneAirCooled_VRPSizing_MaxZd.idf +++ b/testfiles/5ZoneAirCooled_VRPSizing_MaxZd.idf @@ -2262,6 +2262,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2274,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2286,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2298,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2306,6 +2310,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance.idf b/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance.idf index 26e3806663d..f73b5547bd1 100644 --- a/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance.idf +++ b/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance.idf @@ -2362,6 +2362,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2373,6 +2374,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2384,6 +2386,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2395,6 +2398,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2406,6 +2410,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance_Pressurized.idf b/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance_Pressurized.idf index 8295bcfdfa7..a1732778641 100644 --- a/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance_Pressurized.idf +++ b/testfiles/5ZoneAirCooled_ZoneAirMassFlowBalance_Pressurized.idf @@ -2371,6 +2371,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2382,6 +2383,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2393,6 +2395,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2404,6 +2407,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2415,6 +2419,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneAutoDXVAV.idf b/testfiles/5ZoneAutoDXVAV.idf index 807f6de4223..ddb93f105ac 100644 --- a/testfiles/5ZoneAutoDXVAV.idf +++ b/testfiles/5ZoneAutoDXVAV.idf @@ -2337,6 +2337,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2348,6 +2349,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2359,6 +2361,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2370,6 +2373,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2381,6 +2385,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneBoilerOutsideAirReset.idf b/testfiles/5ZoneBoilerOutsideAirReset.idf index 4c522cafe0d..49b03303be6 100644 --- a/testfiles/5ZoneBoilerOutsideAirReset.idf +++ b/testfiles/5ZoneBoilerOutsideAirReset.idf @@ -2293,6 +2293,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2304,6 +2305,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2315,6 +2317,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2326,6 +2329,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2337,6 +2341,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneBranchSupplyPumps.idf b/testfiles/5ZoneBranchSupplyPumps.idf index 8c4617ae8b6..aa03ba3a408 100644 --- a/testfiles/5ZoneBranchSupplyPumps.idf +++ b/testfiles/5ZoneBranchSupplyPumps.idf @@ -2234,6 +2234,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2245,6 +2246,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2256,6 +2258,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2267,6 +2270,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2278,6 +2282,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneCAV_MaxTemp.idf b/testfiles/5ZoneCAV_MaxTemp.idf index d7cfc781557..e673872283a 100644 --- a/testfiles/5ZoneCAV_MaxTemp.idf +++ b/testfiles/5ZoneCAV_MaxTemp.idf @@ -3198,6 +3198,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3209,6 +3210,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3220,6 +3222,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3231,6 +3234,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3242,6 +3246,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneCAV_MaxTemp_JSON_Outputs.idf b/testfiles/5ZoneCAV_MaxTemp_JSON_Outputs.idf index d3c3c064634..a4f97102204 100644 --- a/testfiles/5ZoneCAV_MaxTemp_JSON_Outputs.idf +++ b/testfiles/5ZoneCAV_MaxTemp_JSON_Outputs.idf @@ -3198,6 +3198,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3209,6 +3210,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3220,6 +3222,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3231,6 +3234,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3242,6 +3246,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneCAVtoVAVWarmestTempFlow.idf b/testfiles/5ZoneCAVtoVAVWarmestTempFlow.idf index 5649d2dde1a..1472f4caa8d 100644 --- a/testfiles/5ZoneCAVtoVAVWarmestTempFlow.idf +++ b/testfiles/5ZoneCAVtoVAVWarmestTempFlow.idf @@ -3190,6 +3190,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3201,6 +3202,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3212,6 +3214,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3223,6 +3226,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3234,6 +3238,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneCoolBeam.idf b/testfiles/5ZoneCoolBeam.idf index f84d0b8bec8..bd2c681cc46 100644 --- a/testfiles/5ZoneCoolBeam.idf +++ b/testfiles/5ZoneCoolBeam.idf @@ -2241,6 +2241,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2248,6 +2249,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2255,6 +2257,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2262,6 +2265,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2269,6 +2273,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneCoolingPanelBaseboard.idf b/testfiles/5ZoneCoolingPanelBaseboard.idf index cc4301f94f0..f91449aab59 100644 --- a/testfiles/5ZoneCoolingPanelBaseboard.idf +++ b/testfiles/5ZoneCoolingPanelBaseboard.idf @@ -2237,6 +2237,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2244,6 +2245,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2251,6 +2253,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2258,6 +2261,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2265,6 +2269,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneCoolingPanelBaseboardAuto.idf b/testfiles/5ZoneCoolingPanelBaseboardAuto.idf index 97f2f93bbab..3ea69c15f8e 100644 --- a/testfiles/5ZoneCoolingPanelBaseboardAuto.idf +++ b/testfiles/5ZoneCoolingPanelBaseboardAuto.idf @@ -2237,6 +2237,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2244,6 +2245,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2251,6 +2253,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2258,6 +2261,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2265,6 +2269,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneCoolingPanelBaseboardTotalLoad.idf b/testfiles/5ZoneCoolingPanelBaseboardTotalLoad.idf index ed7d4bc2914..f61a91bfbde 100644 --- a/testfiles/5ZoneCoolingPanelBaseboardTotalLoad.idf +++ b/testfiles/5ZoneCoolingPanelBaseboardTotalLoad.idf @@ -2237,6 +2237,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2244,6 +2245,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2251,6 +2253,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2258,6 +2261,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2265,6 +2269,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneCoolingPanelBaseboardVarOff.idf b/testfiles/5ZoneCoolingPanelBaseboardVarOff.idf index 5ce2eb6347a..ccbd8b89260 100644 --- a/testfiles/5ZoneCoolingPanelBaseboardVarOff.idf +++ b/testfiles/5ZoneCoolingPanelBaseboardVarOff.idf @@ -2237,6 +2237,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2244,6 +2245,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2251,6 +2253,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2258,6 +2261,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2265,6 +2269,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneCostEst.idf b/testfiles/5ZoneCostEst.idf index 4643039ee06..b8c8d4ede19 100644 --- a/testfiles/5ZoneCostEst.idf +++ b/testfiles/5ZoneCostEst.idf @@ -2627,6 +2627,7 @@ ZN1_S_Space_1 Thermostat,!- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_S_Space_1 DualSPSched; !- Control 1 Name @@ -2639,6 +2640,7 @@ ZN2_E_Space_1 Thermostat,!- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_E_Space_1 DualSPSched; !- Control 1 Name @@ -2651,6 +2653,7 @@ ZN3_N_Space_1 Thermostat,!- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_N_Space_1 DualSPSched; !- Control 1 Name @@ -2663,6 +2666,7 @@ ZN4_W_Space_1 Thermostat,!- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_W_Space_1 DualSPSched; !- Control 1 Name @@ -2675,6 +2679,7 @@ ZN5_Core_Space_1 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_Core_Space_1 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneDDCycOnAny.idf b/testfiles/5ZoneDDCycOnAny.idf index 419063eb2a8..bc752d8627e 100644 --- a/testfiles/5ZoneDDCycOnAny.idf +++ b/testfiles/5ZoneDDCycOnAny.idf @@ -3064,6 +3064,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3075,6 +3076,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3086,6 +3088,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3097,6 +3100,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3108,6 +3112,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDDCycOnOne.idf b/testfiles/5ZoneDDCycOnOne.idf index f045a9280cc..2ee45232a5d 100644 --- a/testfiles/5ZoneDDCycOnOne.idf +++ b/testfiles/5ZoneDDCycOnOne.idf @@ -3065,6 +3065,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3076,6 +3077,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3087,6 +3089,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3098,6 +3101,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3109,6 +3113,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDesignInputCoolingCoil.idf b/testfiles/5ZoneDesignInputCoolingCoil.idf index 37a7418d763..8d0d458cb3e 100644 --- a/testfiles/5ZoneDesignInputCoolingCoil.idf +++ b/testfiles/5ZoneDesignInputCoolingCoil.idf @@ -2246,6 +2246,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2257,6 +2258,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2268,6 +2270,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2279,6 +2282,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2290,6 +2294,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDetailedIceStorage.idf b/testfiles/5ZoneDetailedIceStorage.idf index 85f5dad2d88..1ce724fbd0c 100644 --- a/testfiles/5ZoneDetailedIceStorage.idf +++ b/testfiles/5ZoneDetailedIceStorage.idf @@ -2016,6 +2016,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2027,6 +2028,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2038,6 +2040,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2049,6 +2052,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2060,6 +2064,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDetailedIceStorage2.idf b/testfiles/5ZoneDetailedIceStorage2.idf index b37a8f49808..e6056c156e6 100644 --- a/testfiles/5ZoneDetailedIceStorage2.idf +++ b/testfiles/5ZoneDetailedIceStorage2.idf @@ -2016,6 +2016,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2027,6 +2028,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2038,6 +2040,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2049,6 +2052,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2060,6 +2064,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDetailedIceStorageCubicLinear.idf b/testfiles/5ZoneDetailedIceStorageCubicLinear.idf index 25c7ed285eb..5b06976077f 100644 --- a/testfiles/5ZoneDetailedIceStorageCubicLinear.idf +++ b/testfiles/5ZoneDetailedIceStorageCubicLinear.idf @@ -2016,6 +2016,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2027,6 +2028,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2038,6 +2040,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2049,6 +2052,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2060,6 +2064,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneDetailedIceStorageSimpleCtrl.idf b/testfiles/5ZoneDetailedIceStorageSimpleCtrl.idf index 6bd8ca6a8d2..5e45439ab61 100644 --- a/testfiles/5ZoneDetailedIceStorageSimpleCtrl.idf +++ b/testfiles/5ZoneDetailedIceStorageSimpleCtrl.idf @@ -2016,6 +2016,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2027,6 +2028,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2038,6 +2040,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2049,6 +2052,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2060,6 +2064,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneEconomicsTariffAndLifeCycleCosts.idf b/testfiles/5ZoneEconomicsTariffAndLifeCycleCosts.idf index 242c61aa261..a38ad97774f 100644 --- a/testfiles/5ZoneEconomicsTariffAndLifeCycleCosts.idf +++ b/testfiles/5ZoneEconomicsTariffAndLifeCycleCosts.idf @@ -2194,6 +2194,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2205,6 +2206,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2216,6 +2218,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2227,6 +2230,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2238,6 +2242,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneElectricBaseboard.idf b/testfiles/5ZoneElectricBaseboard.idf index ec51e697fb8..72b7a31e6fa 100644 --- a/testfiles/5ZoneElectricBaseboard.idf +++ b/testfiles/5ZoneElectricBaseboard.idf @@ -2243,6 +2243,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2250,6 +2251,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2257,6 +2259,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2264,6 +2267,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2271,6 +2275,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneEndUses.idf b/testfiles/5ZoneEndUses.idf index e6653e6cea7..3f005ff0eee 100644 --- a/testfiles/5ZoneEndUses.idf +++ b/testfiles/5ZoneEndUses.idf @@ -2647,6 +2647,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneEngChill.idf b/testfiles/5ZoneEngChill.idf index ff1b3ef8ac9..04231e00c6c 100644 --- a/testfiles/5ZoneEngChill.idf +++ b/testfiles/5ZoneEngChill.idf @@ -2246,6 +2246,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2257,6 +2258,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2268,6 +2270,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2279,6 +2282,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2290,6 +2294,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneFPIU.idf b/testfiles/5ZoneFPIU.idf index 03c161e9b7e..6ee892b5593 100644 --- a/testfiles/5ZoneFPIU.idf +++ b/testfiles/5ZoneFPIU.idf @@ -2267,6 +2267,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2278,6 +2279,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2289,6 +2291,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2300,6 +2303,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2311,6 +2315,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneFanCoilDOASCool.idf b/testfiles/5ZoneFanCoilDOASCool.idf index c124f23a1fe..666ed86a3d0 100644 --- a/testfiles/5ZoneFanCoilDOASCool.idf +++ b/testfiles/5ZoneFanCoilDOASCool.idf @@ -2148,6 +2148,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2155,6 +2156,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2162,6 +2164,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2169,6 +2172,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2176,6 +2180,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/5ZoneFanCoilDOAS_ERVOnAirLoopMainBranch.idf b/testfiles/5ZoneFanCoilDOAS_ERVOnAirLoopMainBranch.idf index 0bb122dd645..0d5a2a9976d 100644 --- a/testfiles/5ZoneFanCoilDOAS_ERVOnAirLoopMainBranch.idf +++ b/testfiles/5ZoneFanCoilDOAS_ERVOnAirLoopMainBranch.idf @@ -2136,6 +2136,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2144,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2150,6 +2152,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2157,6 +2160,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2164,6 +2168,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/5ZoneFanCoilDOAS_HumidifierOnOASystem.idf b/testfiles/5ZoneFanCoilDOAS_HumidifierOnOASystem.idf index 0ab6f34032a..a60d35f62a3 100644 --- a/testfiles/5ZoneFanCoilDOAS_HumidifierOnOASystem.idf +++ b/testfiles/5ZoneFanCoilDOAS_HumidifierOnOASystem.idf @@ -2152,6 +2152,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2159,6 +2160,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2166,6 +2168,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2173,6 +2176,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2180,6 +2184,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/5ZoneGeometryTransform.idf b/testfiles/5ZoneGeometryTransform.idf index 5e779d8eb4a..4137e57e3d7 100644 --- a/testfiles/5ZoneGeometryTransform.idf +++ b/testfiles/5ZoneGeometryTransform.idf @@ -2582,6 +2582,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2593,6 +2594,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2604,6 +2606,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2615,6 +2618,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2626,6 +2630,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneIceStorage.idf b/testfiles/5ZoneIceStorage.idf index b3c340849bd..08c1d939cc8 100644 --- a/testfiles/5ZoneIceStorage.idf +++ b/testfiles/5ZoneIceStorage.idf @@ -2266,6 +2266,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2277,6 +2278,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2288,6 +2290,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2299,6 +2302,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2310,6 +2314,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneIceStorage_autosized.idf b/testfiles/5ZoneIceStorage_autosized.idf index 99b7935f992..9a6c36f3d0f 100644 --- a/testfiles/5ZoneIceStorage_autosized.idf +++ b/testfiles/5ZoneIceStorage_autosized.idf @@ -2266,6 +2266,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2277,6 +2278,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2288,6 +2290,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2299,6 +2302,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2310,6 +2314,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneNightVent1.idf b/testfiles/5ZoneNightVent1.idf index 18c9d4defe8..a68525c321d 100644 --- a/testfiles/5ZoneNightVent1.idf +++ b/testfiles/5ZoneNightVent1.idf @@ -3162,6 +3162,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3173,6 +3174,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3184,6 +3186,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3195,6 +3198,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3206,6 +3210,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneNightVent2.idf b/testfiles/5ZoneNightVent2.idf index 567fa979951..3db56539a8e 100644 --- a/testfiles/5ZoneNightVent2.idf +++ b/testfiles/5ZoneNightVent2.idf @@ -3542,6 +3542,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3553,6 +3554,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3564,6 +3566,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3575,6 +3578,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3586,6 +3590,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneNightVent3.idf b/testfiles/5ZoneNightVent3.idf index 9615a89253e..4388f3ccfb8 100644 --- a/testfiles/5ZoneNightVent3.idf +++ b/testfiles/5ZoneNightVent3.idf @@ -3208,6 +3208,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3219,6 +3220,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3230,6 +3232,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3241,6 +3244,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3252,6 +3256,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneNightVent4.idf b/testfiles/5ZoneNightVent4.idf index 40b0755c343..3bce886736b 100644 --- a/testfiles/5ZoneNightVent4.idf +++ b/testfiles/5ZoneNightVent4.idf @@ -3208,6 +3208,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3219,6 +3220,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3230,6 +3232,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3241,6 +3244,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3252,6 +3256,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneReturnFan.idf b/testfiles/5ZoneReturnFan.idf index 64b37f781f3..74a079f80fe 100644 --- a/testfiles/5ZoneReturnFan.idf +++ b/testfiles/5ZoneReturnFan.idf @@ -3181,6 +3181,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3192,6 +3193,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3203,6 +3205,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3214,6 +3217,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3225,6 +3229,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneSteamBaseboard.idf b/testfiles/5ZoneSteamBaseboard.idf index cb9a6122b57..a7c20b11d72 100644 --- a/testfiles/5ZoneSteamBaseboard.idf +++ b/testfiles/5ZoneSteamBaseboard.idf @@ -3167,6 +3167,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SPACE1-1 DualSPSched; !- Control 1 Name @@ -3176,6 +3177,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SPACE2-1 DualSPSched; !- Control 1 Name @@ -3185,6 +3187,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SPACE3-1 DualSPSched; !- Control 1 Name @@ -3194,6 +3197,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SPACE4-1 DualSPSched; !- Control 1 Name @@ -3203,6 +3207,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SPACE5-1 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneSupRetPlenRAB.idf b/testfiles/5ZoneSupRetPlenRAB.idf index cf79be164a0..8c153d845f1 100644 --- a/testfiles/5ZoneSupRetPlenRAB.idf +++ b/testfiles/5ZoneSupRetPlenRAB.idf @@ -3440,6 +3440,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3447,6 +3448,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3454,6 +3456,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3461,6 +3464,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3468,6 +3472,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneSupRetPlenVSATU.idf b/testfiles/5ZoneSupRetPlenVSATU.idf index 30f08c3d06b..84363ef7861 100644 --- a/testfiles/5ZoneSupRetPlenVSATU.idf +++ b/testfiles/5ZoneSupRetPlenVSATU.idf @@ -3590,6 +3590,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3601,6 +3602,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3612,6 +3614,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3623,6 +3626,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3634,6 +3638,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneSwimmingPool.idf b/testfiles/5ZoneSwimmingPool.idf index be1664c920d..f7d2b7f03d5 100644 --- a/testfiles/5ZoneSwimmingPool.idf +++ b/testfiles/5ZoneSwimmingPool.idf @@ -2258,6 +2258,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPointPool, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2269,6 +2270,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2280,6 +2282,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2291,6 +2294,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2306,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneSwimmingPoolZoneMultipliers.idf b/testfiles/5ZoneSwimmingPoolZoneMultipliers.idf index 60f4af9ed57..c44ef6eb91c 100644 --- a/testfiles/5ZoneSwimmingPoolZoneMultipliers.idf +++ b/testfiles/5ZoneSwimmingPoolZoneMultipliers.idf @@ -2258,6 +2258,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPointPool, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2269,6 +2270,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2280,6 +2282,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2291,6 +2294,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2306,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneSystemNodeReset.idf b/testfiles/5ZoneSystemNodeReset.idf index cdbe687714d..6cbbf398185 100644 --- a/testfiles/5ZoneSystemNodeReset.idf +++ b/testfiles/5ZoneSystemNodeReset.idf @@ -2152,6 +2152,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2163,6 +2164,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2174,6 +2176,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2185,6 +2188,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2196,6 +2200,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneTDV.idf b/testfiles/5ZoneTDV.idf index 21ed8f88c1d..b5a807f5dfa 100644 --- a/testfiles/5ZoneTDV.idf +++ b/testfiles/5ZoneTDV.idf @@ -2192,6 +2192,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2203,6 +2204,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2214,6 +2216,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2225,6 +2228,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2236,6 +2240,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed.idf b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed.idf index 31ef66f0fb9..71ec1ac69ec 100644 --- a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed.idf +++ b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed.idf @@ -1453,6 +1453,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1947,6 +1948,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2422,6 +2424,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2916,6 +2919,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3496,6 +3500,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MaxZd.idf b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MaxZd.idf index f45b6631b48..b4ff70b0647 100644 --- a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MaxZd.idf +++ b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MaxZd.idf @@ -1432,6 +1432,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1946,6 +1947,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2421,6 +2423,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2915,6 +2918,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3495,6 +3499,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MultiPath.idf b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MultiPath.idf index 05eff4c5d23..343d198911b 100644 --- a/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MultiPath.idf +++ b/testfiles/5ZoneVAV-ChilledWaterStorage-Mixed_DCV_MultiPath.idf @@ -1441,6 +1441,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1955,6 +1956,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2430,6 +2432,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2924,6 +2927,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3504,6 +3508,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneVAV-ChilledWaterStorage-Stratified.idf b/testfiles/5ZoneVAV-ChilledWaterStorage-Stratified.idf index 4f11fd04b45..b0c6207b7e2 100644 --- a/testfiles/5ZoneVAV-ChilledWaterStorage-Stratified.idf +++ b/testfiles/5ZoneVAV-ChilledWaterStorage-Stratified.idf @@ -1444,6 +1444,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1938,6 +1939,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2413,6 +2415,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2907,6 +2910,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3487,6 +3491,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/5ZoneVAV-Pri-SecLoop.idf b/testfiles/5ZoneVAV-Pri-SecLoop.idf index efe6bf14e05..06249245a4e 100644 --- a/testfiles/5ZoneVAV-Pri-SecLoop.idf +++ b/testfiles/5ZoneVAV-Pri-SecLoop.idf @@ -1834,6 +1834,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1953,6 +1954,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2086,6 +2088,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2219,6 +2222,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2352,6 +2356,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/5ZoneVAV-Pri-SecLoop_csv.idf b/testfiles/5ZoneVAV-Pri-SecLoop_csv.idf index 66962934f3a..929ae31110a 100644 --- a/testfiles/5ZoneVAV-Pri-SecLoop_csv.idf +++ b/testfiles/5ZoneVAV-Pri-SecLoop_csv.idf @@ -1839,6 +1839,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1958,6 +1959,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2091,6 +2093,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2224,6 +2227,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2357,6 +2361,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/5ZoneWLHPPlantLoopTower.idf b/testfiles/5ZoneWLHPPlantLoopTower.idf index 1a6f8e3f5ad..4cfb9264459 100644 --- a/testfiles/5ZoneWLHPPlantLoopTower.idf +++ b/testfiles/5ZoneWLHPPlantLoopTower.idf @@ -1951,6 +1951,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1962,6 +1963,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1973,6 +1975,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1984,6 +1987,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1995,6 +1999,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmest.idf b/testfiles/5ZoneWarmest.idf index 93112287cf6..ccb24f949c6 100644 --- a/testfiles/5ZoneWarmest.idf +++ b/testfiles/5ZoneWarmest.idf @@ -2263,6 +2263,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2274,6 +2275,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2285,6 +2287,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2296,6 +2299,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2307,6 +2311,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestMultDDSizBypass.idf b/testfiles/5ZoneWarmestMultDDSizBypass.idf index e6f08627deb..ad5e08657ed 100644 --- a/testfiles/5ZoneWarmestMultDDSizBypass.idf +++ b/testfiles/5ZoneWarmestMultDDSizBypass.idf @@ -2291,6 +2291,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2303,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2313,6 +2315,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2324,6 +2327,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2335,6 +2339,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestMultDDSizOnOff.idf b/testfiles/5ZoneWarmestMultDDSizOnOff.idf index 22b6f53c673..b8b087f33eb 100644 --- a/testfiles/5ZoneWarmestMultDDSizOnOff.idf +++ b/testfiles/5ZoneWarmestMultDDSizOnOff.idf @@ -2291,6 +2291,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2303,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2313,6 +2315,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2324,6 +2327,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2335,6 +2339,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestMultDDSizVAV.idf b/testfiles/5ZoneWarmestMultDDSizVAV.idf index 20af49d9f00..1003634d79d 100644 --- a/testfiles/5ZoneWarmestMultDDSizVAV.idf +++ b/testfiles/5ZoneWarmestMultDDSizVAV.idf @@ -2291,6 +2291,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2303,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2313,6 +2315,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2324,6 +2327,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2335,6 +2339,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestMultDDSizVT.idf b/testfiles/5ZoneWarmestMultDDSizVT.idf index 736385be566..f7b02fb17ed 100644 --- a/testfiles/5ZoneWarmestMultDDSizVT.idf +++ b/testfiles/5ZoneWarmestMultDDSizVT.idf @@ -2291,6 +2291,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2302,6 +2303,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2313,6 +2315,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2324,6 +2327,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2335,6 +2339,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestParallelPIULeak.idf b/testfiles/5ZoneWarmestParallelPIULeak.idf index c0a4d5c1bfb..a435fc791f8 100644 --- a/testfiles/5ZoneWarmestParallelPIULeak.idf +++ b/testfiles/5ZoneWarmestParallelPIULeak.idf @@ -2279,6 +2279,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2290,6 +2291,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2301,6 +2303,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2312,6 +2315,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2323,6 +2327,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestVFD.idf b/testfiles/5ZoneWarmestVFD.idf index 4a1f03b4047..4d5b2ae72b2 100644 --- a/testfiles/5ZoneWarmestVFD.idf +++ b/testfiles/5ZoneWarmestVFD.idf @@ -2267,6 +2267,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2278,6 +2279,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2289,6 +2291,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2300,6 +2303,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2311,6 +2315,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWarmestVFD_FCMAuto.idf b/testfiles/5ZoneWarmestVFD_FCMAuto.idf index 7ad3298d20d..537e9bdea84 100644 --- a/testfiles/5ZoneWarmestVFD_FCMAuto.idf +++ b/testfiles/5ZoneWarmestVFD_FCMAuto.idf @@ -2246,6 +2246,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2257,6 +2258,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2268,6 +2270,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2279,6 +2282,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2290,6 +2294,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterCooled_Baseboard.idf b/testfiles/5ZoneWaterCooled_Baseboard.idf index 5378e37ee95..d0fc631e830 100644 --- a/testfiles/5ZoneWaterCooled_Baseboard.idf +++ b/testfiles/5ZoneWaterCooled_Baseboard.idf @@ -2236,6 +2236,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2243,6 +2244,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2250,6 +2252,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2257,6 +2260,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2264,6 +2268,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterCooled_BaseboardScalableSizing.idf b/testfiles/5ZoneWaterCooled_BaseboardScalableSizing.idf index edffd9411c8..0f05350bff0 100644 --- a/testfiles/5ZoneWaterCooled_BaseboardScalableSizing.idf +++ b/testfiles/5ZoneWaterCooled_BaseboardScalableSizing.idf @@ -2238,6 +2238,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2245,6 +2246,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2252,6 +2254,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2259,6 +2262,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2266,6 +2270,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterCooled_GasFiredSteamHumidifier.idf b/testfiles/5ZoneWaterCooled_GasFiredSteamHumidifier.idf index 3261e38433d..5a088ee8d37 100644 --- a/testfiles/5ZoneWaterCooled_GasFiredSteamHumidifier.idf +++ b/testfiles/5ZoneWaterCooled_GasFiredSteamHumidifier.idf @@ -2270,6 +2270,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2283,6 +2284,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2296,6 +2298,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2309,6 +2312,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2322,6 +2326,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterCooled_HighRHControl.idf b/testfiles/5ZoneWaterCooled_HighRHControl.idf index 9b8af6ab75d..3aa214375a3 100644 --- a/testfiles/5ZoneWaterCooled_HighRHControl.idf +++ b/testfiles/5ZoneWaterCooled_HighRHControl.idf @@ -2240,6 +2240,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2247,6 +2248,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2259,6 +2261,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2266,6 +2269,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2273,6 +2277,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterCooled_MultizoneAverageRHControl.idf b/testfiles/5ZoneWaterCooled_MultizoneAverageRHControl.idf index 9ee2d65ebce..f51ecbef9f7 100644 --- a/testfiles/5ZoneWaterCooled_MultizoneAverageRHControl.idf +++ b/testfiles/5ZoneWaterCooled_MultizoneAverageRHControl.idf @@ -2263,6 +2263,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2276,6 +2277,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2289,6 +2291,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2302,6 +2305,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2315,6 +2319,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterCooled_MultizoneMinMaxRHControl.idf b/testfiles/5ZoneWaterCooled_MultizoneMinMaxRHControl.idf index 18922776724..9bca9ea27e0 100644 --- a/testfiles/5ZoneWaterCooled_MultizoneMinMaxRHControl.idf +++ b/testfiles/5ZoneWaterCooled_MultizoneMinMaxRHControl.idf @@ -2270,6 +2270,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2283,6 +2284,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2296,6 +2298,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2309,6 +2312,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2322,6 +2326,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/5ZoneWaterLoopHeatPump.idf b/testfiles/5ZoneWaterLoopHeatPump.idf index 4b710533a9b..9ed4d59e8d9 100644 --- a/testfiles/5ZoneWaterLoopHeatPump.idf +++ b/testfiles/5ZoneWaterLoopHeatPump.idf @@ -1865,6 +1865,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1876,6 +1877,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1887,6 +1889,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1898,6 +1901,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1909,6 +1913,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterSystems.idf b/testfiles/5ZoneWaterSystems.idf index 4d1a3f8fa7a..38532fc6b4a 100644 --- a/testfiles/5ZoneWaterSystems.idf +++ b/testfiles/5ZoneWaterSystems.idf @@ -4244,6 +4244,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4255,6 +4256,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4266,6 +4268,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4277,6 +4280,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4288,6 +4292,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterSystemsAbsorpUpgrades.idf b/testfiles/5ZoneWaterSystemsAbsorpUpgrades.idf index c81f7f8913d..e83dac2fd40 100644 --- a/testfiles/5ZoneWaterSystemsAbsorpUpgrades.idf +++ b/testfiles/5ZoneWaterSystemsAbsorpUpgrades.idf @@ -4316,6 +4316,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4327,6 +4328,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4338,6 +4340,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4349,6 +4352,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4360,6 +4364,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterSystemsEMSAbsorpCtrl.idf b/testfiles/5ZoneWaterSystemsEMSAbsorpCtrl.idf index 8a6429b2310..490cccab0f5 100644 --- a/testfiles/5ZoneWaterSystemsEMSAbsorpCtrl.idf +++ b/testfiles/5ZoneWaterSystemsEMSAbsorpCtrl.idf @@ -4297,6 +4297,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4308,6 +4309,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4319,6 +4321,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4330,6 +4333,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4341,6 +4345,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterSystemsZoneMRTCalc.idf b/testfiles/5ZoneWaterSystemsZoneMRTCalc.idf index 7aad59dd494..de733375e77 100644 --- a/testfiles/5ZoneWaterSystemsZoneMRTCalc.idf +++ b/testfiles/5ZoneWaterSystemsZoneMRTCalc.idf @@ -4304,6 +4304,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4315,6 +4316,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4326,6 +4328,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4337,6 +4340,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -4348,6 +4352,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5ZoneWaterSystems_NoSitePrec.idf b/testfiles/5ZoneWaterSystems_NoSitePrec.idf index 5f7166fa30e..465764aac9a 100644 --- a/testfiles/5ZoneWaterSystems_NoSitePrec.idf +++ b/testfiles/5ZoneWaterSystems_NoSitePrec.idf @@ -2602,6 +2602,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2613,6 +2614,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2624,6 +2626,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2635,6 +2638,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2646,6 +2650,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5Zone_IdealLoadsAirSystems_ReturnPlenum.idf b/testfiles/5Zone_IdealLoadsAirSystems_ReturnPlenum.idf index 6a65da0175d..289b6258120 100644 --- a/testfiles/5Zone_IdealLoadsAirSystems_ReturnPlenum.idf +++ b/testfiles/5Zone_IdealLoadsAirSystems_ReturnPlenum.idf @@ -2241,6 +2241,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2252,6 +2253,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2263,6 +2265,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2274,6 +2277,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2285,6 +2289,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5Zone_Transformer.idf b/testfiles/5Zone_Transformer.idf index c1cb71881a9..0a18e65f2b1 100644 --- a/testfiles/5Zone_Transformer.idf +++ b/testfiles/5Zone_Transformer.idf @@ -2260,6 +2260,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2271,6 +2272,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2282,6 +2284,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2293,6 +2296,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2304,6 +2308,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5Zone_Unitary_HXAssistedCoil.idf b/testfiles/5Zone_Unitary_HXAssistedCoil.idf index 44acfbad2c7..43d8085dc96 100644 --- a/testfiles/5Zone_Unitary_HXAssistedCoil.idf +++ b/testfiles/5Zone_Unitary_HXAssistedCoil.idf @@ -2273,6 +2273,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2285,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2297,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2306,6 +2309,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2317,6 +2321,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5Zone_Unitary_VSDesuperheatWaterHeater.idf b/testfiles/5Zone_Unitary_VSDesuperheatWaterHeater.idf index 7bf05e65b5e..ed1785e1d5b 100644 --- a/testfiles/5Zone_Unitary_VSDesuperheatWaterHeater.idf +++ b/testfiles/5Zone_Unitary_VSDesuperheatWaterHeater.idf @@ -2273,6 +2273,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2285,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2297,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2306,6 +2309,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2317,6 +2321,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/5Zone_Unitary_VSDesuperheater.idf b/testfiles/5Zone_Unitary_VSDesuperheater.idf index 2acae68c76a..918e1cef498 100644 --- a/testfiles/5Zone_Unitary_VSDesuperheater.idf +++ b/testfiles/5Zone_Unitary_VSDesuperheater.idf @@ -2273,6 +2273,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2285,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2297,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2306,6 +2309,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2317,6 +2321,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/API/user_defined_equipment.idf b/testfiles/API/user_defined_equipment.idf index 158c8595cd9..70deb0fd08d 100644 --- a/testfiles/API/user_defined_equipment.idf +++ b/testfiles/API/user_defined_equipment.idf @@ -1571,6 +1571,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1580,6 +1581,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1589,6 +1591,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ASHRAE901_ApartmentHighRise_STD2019_Denver.idf b/testfiles/ASHRAE901_ApartmentHighRise_STD2019_Denver.idf index 249d6a9ed5f..96a220c6207 100644 --- a/testfiles/ASHRAE901_ApartmentHighRise_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_ApartmentHighRise_STD2019_Denver.idf @@ -27444,6 +27444,7 @@ G SW Apartment Thermostat, !- Name G SW Apartment, !- Zone or ZoneList Name ZONE CONTROL TYPE SCHED, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27455,6 +27456,7 @@ G NW Apartment Thermostat, !- Name G NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27466,6 +27468,7 @@ Office Thermostat, !- Name Office, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type OffCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27477,6 +27480,7 @@ G NE Apartment Thermostat, !- Name G NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27488,6 +27492,7 @@ G N1 Apartment Thermostat, !- Name G N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27499,6 +27504,7 @@ G N2 Apartment Thermostat, !- Name G N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27510,6 +27516,7 @@ G S1 Apartment Thermostat, !- Name G S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27521,6 +27528,7 @@ G S2 Apartment Thermostat, !- Name G S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27532,6 +27540,7 @@ F2 SW Apartment Thermostat, !- Name F2 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27543,6 +27552,7 @@ F2 NW Apartment Thermostat, !- Name F2 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27554,6 +27564,7 @@ F2 SE Apartment Thermostat, !- Name F2 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27565,6 +27576,7 @@ F2 NE Apartment Thermostat, !- Name F2 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27576,6 +27588,7 @@ F2 N1 Apartment Thermostat, !- Name F2 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27587,6 +27600,7 @@ F2 N2 Apartment Thermostat, !- Name F2 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27598,6 +27612,7 @@ F2 S1 Apartment Thermostat, !- Name F2 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27609,6 +27624,7 @@ F2 S2 Apartment Thermostat, !- Name F2 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27620,6 +27636,7 @@ F3 SW Apartment Thermostat, !- Name F3 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27631,6 +27648,7 @@ F3 NW Apartment Thermostat, !- Name F3 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27642,6 +27660,7 @@ F3 SE Apartment Thermostat, !- Name F3 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27653,6 +27672,7 @@ F3 NE Apartment Thermostat, !- Name F3 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27664,6 +27684,7 @@ F3 N1 Apartment Thermostat, !- Name F3 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27675,6 +27696,7 @@ F3 N2 Apartment Thermostat, !- Name F3 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27686,6 +27708,7 @@ F3 S1 Apartment Thermostat, !- Name F3 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27697,6 +27720,7 @@ F3 S2 Apartment Thermostat, !- Name F3 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27708,6 +27732,7 @@ F4 SW Apartment Thermostat, !- Name F4 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27719,6 +27744,7 @@ F4 NW Apartment Thermostat, !- Name F4 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27730,6 +27756,7 @@ F4 SE Apartment Thermostat, !- Name F4 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27741,6 +27768,7 @@ F4 NE Apartment Thermostat, !- Name F4 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27752,6 +27780,7 @@ F4 N1 Apartment Thermostat, !- Name F4 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27763,6 +27792,7 @@ F4 N2 Apartment Thermostat, !- Name F4 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27774,6 +27804,7 @@ F4 S1 Apartment Thermostat, !- Name F4 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27785,6 +27816,7 @@ F4 S2 Apartment Thermostat, !- Name F4 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27796,6 +27828,7 @@ M SW Apartment Thermostat, !- Name M SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27807,6 +27840,7 @@ M NW Apartment Thermostat, !- Name M NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27818,6 +27852,7 @@ M SE Apartment Thermostat, !- Name M SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27829,6 +27864,7 @@ M NE Apartment Thermostat, !- Name M NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27840,6 +27876,7 @@ M N1 Apartment Thermostat, !- Name M N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27851,6 +27888,7 @@ M N2 Apartment Thermostat, !- Name M N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27862,6 +27900,7 @@ M S1 Apartment Thermostat, !- Name M S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27873,6 +27912,7 @@ M S2 Apartment Thermostat, !- Name M S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27884,6 +27924,7 @@ F6 SW Apartment Thermostat, !- Name F6 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27895,6 +27936,7 @@ F6 NW Apartment Thermostat, !- Name F6 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27906,6 +27948,7 @@ F6 SE Apartment Thermostat, !- Name F6 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27917,6 +27960,7 @@ F6 NE Apartment Thermostat, !- Name F6 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27928,6 +27972,7 @@ F6 N1 Apartment Thermostat, !- Name F6 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27939,6 +27984,7 @@ F6 N2 Apartment Thermostat, !- Name F6 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27950,6 +27996,7 @@ F6 S1 Apartment Thermostat, !- Name F6 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27961,6 +28008,7 @@ F6 S2 Apartment Thermostat, !- Name F6 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27972,6 +28020,7 @@ F7 SW Apartment Thermostat, !- Name F7 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27983,6 +28032,7 @@ F7 NW Apartment Thermostat, !- Name F7 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -27994,6 +28044,7 @@ F7 SE Apartment Thermostat, !- Name F7 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28005,6 +28056,7 @@ F7 NE Apartment Thermostat, !- Name F7 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28016,6 +28068,7 @@ F7 N1 Apartment Thermostat, !- Name F7 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28027,6 +28080,7 @@ F7 N2 Apartment Thermostat, !- Name F7 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28038,6 +28092,7 @@ F7 S1 Apartment Thermostat, !- Name F7 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28049,6 +28104,7 @@ F7 S2 Apartment Thermostat, !- Name F7 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28060,6 +28116,7 @@ F8 SW Apartment Thermostat, !- Name F8 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28071,6 +28128,7 @@ F8 NW Apartment Thermostat, !- Name F8 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28082,6 +28140,7 @@ F8 SE Apartment Thermostat, !- Name F8 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28093,6 +28152,7 @@ F8 NE Apartment Thermostat, !- Name F8 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28104,6 +28164,7 @@ F8 N1 Apartment Thermostat, !- Name F8 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28115,6 +28176,7 @@ F8 N2 Apartment Thermostat, !- Name F8 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28126,6 +28188,7 @@ F8 S1 Apartment Thermostat, !- Name F8 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28137,6 +28200,7 @@ F8 S2 Apartment Thermostat, !- Name F8 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28148,6 +28212,7 @@ F9 SW Apartment Thermostat, !- Name F9 SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28159,6 +28224,7 @@ F9 NW Apartment Thermostat, !- Name F9 NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28170,6 +28236,7 @@ F9 SE Apartment Thermostat, !- Name F9 SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28181,6 +28248,7 @@ F9 NE Apartment Thermostat, !- Name F9 NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28192,6 +28260,7 @@ F9 N1 Apartment Thermostat, !- Name F9 N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28203,6 +28272,7 @@ F9 N2 Apartment Thermostat, !- Name F9 N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28214,6 +28284,7 @@ F9 S1 Apartment Thermostat, !- Name F9 S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28225,6 +28296,7 @@ F9 S2 Apartment Thermostat, !- Name F9 S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28236,6 +28308,7 @@ T SW Apartment Thermostat, !- Name T SW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28247,6 +28320,7 @@ T NW Apartment Thermostat, !- Name T NW Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28258,6 +28332,7 @@ T SE Apartment Thermostat, !- Name T SE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28269,6 +28344,7 @@ T NE Apartment Thermostat, !- Name T NE Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28280,6 +28356,7 @@ T N1 Apartment Thermostat, !- Name T N1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28291,6 +28368,7 @@ T N2 Apartment Thermostat, !- Name T N2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28302,6 +28380,7 @@ T S1 Apartment Thermostat, !- Name T S1 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -28313,6 +28392,7 @@ T S2 Apartment Thermostat, !- Name T S2 Apartment, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/ASHRAE901_ApartmentMidRise_STD2019_Denver.idf b/testfiles/ASHRAE901_ApartmentMidRise_STD2019_Denver.idf index d0e0f6ddab2..8d90f4fca0f 100644 --- a/testfiles/ASHRAE901_ApartmentMidRise_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_ApartmentMidRise_STD2019_Denver.idf @@ -9016,6 +9016,7 @@ G SW Apartment Thermostat, !- Name G SW Apartment, !- Zone or ZoneList Name ZONE CONTROL TYPE SCHED, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type AptCoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -9027,6 +9028,7 @@ G NW Apartment Thermostat, !- Name G NW Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9034,6 +9036,7 @@ Office Thermostat, !- Name Office, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Dual SP Control; !- Control 1 Name @@ -9041,6 +9044,7 @@ G NE Apartment Thermostat, !- Name G NE Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9048,6 +9052,7 @@ G N1 Apartment Thermostat, !- Name G N1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9055,6 +9060,7 @@ G N2 Apartment Thermostat, !- Name G N2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9062,6 +9068,7 @@ G S1 Apartment Thermostat, !- Name G S1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9069,6 +9076,7 @@ G S2 Apartment Thermostat, !- Name G S2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9076,6 +9084,7 @@ M SW Apartment Thermostat, !- Name M SW Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9083,6 +9092,7 @@ M NW Apartment Thermostat, !- Name M NW Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9090,6 +9100,7 @@ M SE Apartment Thermostat, !- Name M SE Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9097,6 +9108,7 @@ M NE Apartment Thermostat, !- Name M NE Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9104,6 +9116,7 @@ M N1 Apartment Thermostat, !- Name M N1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9111,6 +9124,7 @@ M N2 Apartment Thermostat, !- Name M N2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9118,6 +9132,7 @@ M S1 Apartment Thermostat, !- Name M S1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9125,6 +9140,7 @@ M S2 Apartment Thermostat, !- Name M S2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9132,6 +9148,7 @@ T SW Apartment Thermostat, !- Name T SW Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9139,6 +9156,7 @@ T NW Apartment Thermostat, !- Name T NW Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9146,6 +9164,7 @@ T SE Apartment Thermostat, !- Name T SE Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9153,6 +9172,7 @@ T NE Apartment Thermostat, !- Name T NE Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9160,6 +9180,7 @@ T N1 Apartment Thermostat, !- Name T N1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9167,6 +9188,7 @@ T N2 Apartment Thermostat, !- Name T N2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N Apartment Dual SP Control; !- Control 1 Name @@ -9174,6 +9196,7 @@ T S1 Apartment Thermostat, !- Name T S1 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name @@ -9181,6 +9204,7 @@ T S2 Apartment Thermostat, !- Name T S2 Apartment, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S Apartment Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_Hospital_STD2019_Denver.idf b/testfiles/ASHRAE901_Hospital_STD2019_Denver.idf index 28e16e696fc..4130f66e6e5 100644 --- a/testfiles/ASHRAE901_Hospital_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_Hospital_STD2019_Denver.idf @@ -18223,6 +18223,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -18230,6 +18231,7 @@ ER_Exam1_Mult4_Flr_1 Thermostat, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18237,6 +18239,7 @@ ER_Trauma1_Flr_1 Thermostat, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma1_Flr_1 DualSPSched; !- Control 1 Name @@ -18244,6 +18247,7 @@ ER_Exam3_Mult4_Flr_1 Thermostat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18251,6 +18255,7 @@ ER_Trauma2_Flr_1 Thermostat, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma2_Flr_1 DualSPSched; !- Control 1 Name @@ -18258,6 +18263,7 @@ ER_Triage_Mult4_Flr_1 Thermostat, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Triage_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18265,6 +18271,7 @@ Office1_Mult4_Flr_1 Thermostat, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18272,6 +18279,7 @@ Lobby_Records_Flr_1 Thermostat, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Records_Flr_1 DualSPSched; !- Control 1 Name @@ -18279,6 +18287,7 @@ Corridor_Flr_1 Thermostat, !- Name Corridor_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_1 DualSPSched; !- Control 1 Name @@ -18286,6 +18295,7 @@ ER_NurseStn_Lobby_Flr_1 Thermostat, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_NurseStn_Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -18293,6 +18303,7 @@ OR1_Flr_2 Thermostat, !- Name OR1_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR1_Flr_2 DualSPSched; !- Control 1 Name @@ -18300,6 +18311,7 @@ OR2_Mult5_Flr_2 Thermostat, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18307,6 +18319,7 @@ OR3_Flr_2 Thermostat, !- Name OR3_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR3_Flr_2 DualSPSched; !- Control 1 Name @@ -18314,6 +18327,7 @@ OR4_Flr_2 Thermostat, !- Name OR4_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR4_Flr_2 DualSPSched; !- Control 1 Name @@ -18321,6 +18335,7 @@ IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18328,6 +18343,7 @@ IC_PatRoom2_Flr_2 Thermostat, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name @@ -18335,6 +18351,7 @@ IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name @@ -18342,6 +18359,7 @@ ICU_Flr_2 Thermostat, !- Name ICU_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_Flr_2 DualSPSched; !- Control 1 Name @@ -18349,6 +18367,7 @@ ICU_NurseStn_Lobby_Flr_2 Thermostat, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18356,6 +18375,7 @@ Corridor_Flr_2 Thermostat, !- Name Corridor_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_2 DualSPSched; !- Control 1 Name @@ -18363,6 +18383,7 @@ OR_NurseStn_Lobby_Flr_2 Thermostat, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18370,6 +18391,7 @@ PatRoom1_Mult10_Flr_3 Thermostat, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18377,6 +18399,7 @@ PatRoom2_Flr_3 Thermostat, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_3 DualSPSched; !- Control 1 Name @@ -18384,6 +18407,7 @@ PatRoom3_Mult10_Flr_3 Thermostat, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18391,6 +18415,7 @@ PatRoom4_Flr_3 Thermostat, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_3 DualSPSched; !- Control 1 Name @@ -18398,6 +18423,7 @@ PatRoom5_Mult10_Flr_3 Thermostat, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18405,6 +18431,7 @@ PhysTherapy_Flr_3 Thermostat, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name @@ -18412,6 +18439,7 @@ PatRoom6_Flr_3 Thermostat, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_3 DualSPSched; !- Control 1 Name @@ -18419,6 +18447,7 @@ PatRoom7_Mult10_Flr_3 Thermostat, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18426,6 +18455,7 @@ PatRoom8_Flr_3 Thermostat, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_3 DualSPSched; !- Control 1 Name @@ -18433,6 +18463,7 @@ NurseStn_Lobby_Flr_3 Thermostat, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_3 DualSPSched; !- Control 1 Name @@ -18440,6 +18471,7 @@ Lab_Flr_3 Thermostat, !- Name Lab_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_3 DualSPSched; !- Control 1 Name @@ -18447,6 +18479,7 @@ Corridor_SE_Flr_3 Thermostat, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name @@ -18454,6 +18487,7 @@ Corridor_NW_Flr_3 Thermostat, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name @@ -18461,6 +18495,7 @@ PatRoom1_Mult10_Flr_4 Thermostat, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18468,6 +18503,7 @@ PatRoom2_Flr_4 Thermostat, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_4 DualSPSched; !- Control 1 Name @@ -18475,6 +18511,7 @@ PatRoom3_Mult10_Flr_4 Thermostat, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18482,6 +18519,7 @@ PatRoom4_Flr_4 Thermostat, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_4 DualSPSched; !- Control 1 Name @@ -18489,6 +18527,7 @@ PatRoom5_Mult10_Flr_4 Thermostat, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18496,6 +18535,7 @@ Radiology_Flr_4 Thermostat, !- Name Radiology_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Radiology_Flr_4 DualSPSched; !- Control 1 Name @@ -18503,6 +18543,7 @@ PatRoom6_Flr_4 Thermostat, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_4 DualSPSched; !- Control 1 Name @@ -18510,6 +18551,7 @@ PatRoom7_Mult10_Flr_4 Thermostat, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18517,6 +18559,7 @@ PatRoom8_Flr_4 Thermostat, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_4 DualSPSched; !- Control 1 Name @@ -18524,6 +18567,7 @@ NurseStn_Lobby_Flr_4 Thermostat, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_4 DualSPSched; !- Control 1 Name @@ -18531,6 +18575,7 @@ Lab_Flr_4 Thermostat, !- Name Lab_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_4 DualSPSched; !- Control 1 Name @@ -18538,6 +18583,7 @@ Corridor_SE_Flr_4 Thermostat, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name @@ -18545,6 +18591,7 @@ Corridor_NW_Flr_4 Thermostat, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name @@ -18552,6 +18599,7 @@ Dining_Flr_5 Thermostat, !- Name Dining_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_5 DualSPSched;!- Control 1 Name @@ -18559,6 +18607,7 @@ NurseStn_Lobby_Flr_5 Thermostat, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_5 DualSPSched; !- Control 1 Name @@ -18566,6 +18615,7 @@ Kitchen_Flr_5 Thermostat,!- Name Kitchen_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_5 DualSPSched; !- Control 1 Name @@ -18573,6 +18623,7 @@ Office1_Flr_5 Thermostat,!- Name Office1_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Flr_5 DualSPSched; !- Control 1 Name @@ -18580,6 +18631,7 @@ Office2_Mult5_Flr_5 Thermostat, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name @@ -18587,6 +18639,7 @@ Office3_Flr_5 Thermostat,!- Name Office3_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office3_Flr_5 DualSPSched; !- Control 1 Name @@ -18594,6 +18647,7 @@ Office4_Mult6_Flr_5 Thermostat, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name @@ -18601,6 +18655,7 @@ Corridor_Flr_5 Thermostat, !- Name Corridor_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_HotelLarge_STD2019_Denver.idf b/testfiles/ASHRAE901_HotelLarge_STD2019_Denver.idf index 03cd3b9a85d..a11962f324a 100644 --- a/testfiles/ASHRAE901_HotelLarge_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_HotelLarge_STD2019_Denver.idf @@ -9691,6 +9691,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -9698,6 +9699,7 @@ Retail_1_Flr_1 Thermostat, !- Name Retail_1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Retail_1_Flr_1 DualSPSched; !- Control 1 Name @@ -9705,6 +9707,7 @@ Retail_2_Flr_1 Thermostat, !- Name Retail_2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Retail_2_Flr_1 DualSPSched; !- Control 1 Name @@ -9712,6 +9715,7 @@ Mech_Flr_1 Thermostat, !- Name Mech_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_Flr_1 DualSPSched; !- Control 1 Name @@ -9719,6 +9723,7 @@ Storage_Flr_1 Thermostat,!- Name Storage_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Storage_Flr_1 DualSPSched; !- Control 1 Name @@ -9726,6 +9731,7 @@ Laundry_Flr_1 Thermostat,!- Name Laundry_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Laundry_Flr_1 DualSPSched; !- Control 1 Name @@ -9733,6 +9739,7 @@ Cafe_Flr_1 Thermostat, !- Name Cafe_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafe_Flr_1 DualSPSched; !- Control 1 Name @@ -9740,6 +9747,7 @@ Lobby_Flr_1 Thermostat, !- Name Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -9747,6 +9755,7 @@ Room_1_Flr_3 Thermostat, !- Name Room_1_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9754,6 +9763,7 @@ Room_2_Flr_3 Thermostat, !- Name Room_2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9761,6 +9771,7 @@ Room_3_Mult19_Flr_3 Thermostat, !- Name Room_3_Mult19_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9768,6 +9779,7 @@ Room_4_Mult19_Flr_3 Thermostat, !- Name Room_4_Mult19_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9775,6 +9787,7 @@ Room_5_Flr_3 Thermostat, !- Name Room_5_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9782,6 +9795,7 @@ Room_6_Flr_3 Thermostat, !- Name Room_6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9789,6 +9803,7 @@ Corridor_Flr_3 Thermostat, !- Name Corridor_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_3 DualSPSched; !- Control 1 Name @@ -9796,6 +9811,7 @@ Room_1_Flr_6 Thermostat, !- Name Room_1_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9803,6 +9819,7 @@ Room_2_Flr_6 Thermostat, !- Name Room_2_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9810,6 +9827,7 @@ Room_3_Mult9_Flr_6 Thermostat, !- Name Room_3_Mult9_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -9817,6 +9835,7 @@ Banquet_Flr_6 Thermostat,!- Name Banquet_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Banquet_Flr_6 DualSPSched; !- Control 1 Name @@ -9824,6 +9843,7 @@ Dining_Flr_6 Thermostat, !- Name Dining_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_6 DualSPSched;!- Control 1 Name @@ -9831,6 +9851,7 @@ Kitchen_Flr_6 Thermostat,!- Name Kitchen_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_6 DualSPSched; !- Control 1 Name @@ -9838,6 +9859,7 @@ Corridor_Flr_6 Thermostat, !- Name Corridor_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_6 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_HotelSmall_STD2019_Denver.idf b/testfiles/ASHRAE901_HotelSmall_STD2019_Denver.idf index 78be64e7f59..81ae21f757c 100644 --- a/testfiles/ASHRAE901_HotelSmall_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_HotelSmall_STD2019_Denver.idf @@ -19814,6 +19814,7 @@ 101 Thermostat, !- Name GuestRoom101, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19821,6 +19822,7 @@ 102 Thermostat, !- Name GuestRoom102, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19828,6 +19830,7 @@ 103 Thermostat, !- Name GuestRoom103, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19835,6 +19838,7 @@ 104 Thermostat, !- Name GuestRoom104, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19842,6 +19846,7 @@ 105 Thermostat, !- Name GuestRoom105, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19849,6 +19854,7 @@ 201 Thermostat, !- Name GuestRoom201, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19856,6 +19862,7 @@ 202_205 Thermostat, !- Name GuestRoom202_205, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19863,6 +19870,7 @@ 206_208 Thermostat, !- Name GuestRoom206_208, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19870,6 +19878,7 @@ 209_212 Thermostat, !- Name GuestRoom209_212, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19877,6 +19886,7 @@ 213 Thermostat, !- Name GuestRoom213, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19884,6 +19894,7 @@ 214 Thermostat, !- Name GuestRoom214, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19891,6 +19902,7 @@ 215_218 Thermostat, !- Name GuestRoom215_218, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19898,6 +19910,7 @@ 219 Thermostat, !- Name GuestRoom219, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19905,6 +19918,7 @@ 220_223 Thermostat, !- Name GuestRoom220_223, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19912,6 +19926,7 @@ 224 Thermostat, !- Name GuestRoom224, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19919,6 +19934,7 @@ 301 Thermostat, !- Name GuestRoom301, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19926,6 +19942,7 @@ 302_305 Thermostat, !- Name GuestRoom302_305, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19933,6 +19950,7 @@ 306_308 Thermostat, !- Name GuestRoom306_308, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19940,6 +19958,7 @@ 309_312 Thermostat, !- Name GuestRoom309_312, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19947,6 +19966,7 @@ 313 Thermostat, !- Name GuestRoom313, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19954,6 +19974,7 @@ 314 Thermostat, !- Name GuestRoom314, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19961,6 +19982,7 @@ 315_318 Thermostat, !- Name GuestRoom315_318, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19968,6 +19990,7 @@ 319 Thermostat, !- Name GuestRoom319, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19975,6 +19998,7 @@ 320_323 Thermostat, !- Name GuestRoom320_323, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19982,6 +20006,7 @@ 324 Thermostat, !- Name GuestRoom324, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19989,6 +20014,7 @@ 401 Thermostat, !- Name GuestRoom401, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -19996,6 +20022,7 @@ 402_405 Thermostat, !- Name GuestRoom402_405, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20003,6 +20030,7 @@ 406_408 Thermostat, !- Name GuestRoom406_408, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20010,6 +20038,7 @@ 409_412 Thermostat, !- Name GuestRoom409_412, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type N OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20017,6 +20046,7 @@ 413 Thermostat, !- Name GuestRoom413, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20024,6 +20054,7 @@ 414 Thermostat, !- Name GuestRoom414, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VacGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20031,6 +20062,7 @@ 415_418 Thermostat, !- Name GuestRoom415_418, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20038,6 +20070,7 @@ 419 Thermostat, !- Name GuestRoom419, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20045,6 +20078,7 @@ 420_423 Thermostat, !- Name GuestRoom420_423, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20052,6 +20086,7 @@ 424 Thermostat, !- Name GuestRoom424, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type S OccGuestRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20059,6 +20094,7 @@ RearStairsFlr1 Thermostat, !- Name RearStairsFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20066,6 +20102,7 @@ FrontLoungeFlr1 Thermostat, !- Name FrontLoungeFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20073,6 +20110,7 @@ RestRoomFlr1 Thermostat, !- Name RestRoomFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20080,6 +20118,7 @@ MeetingRoomFlr1 Thermostat, !- Name MeetingRoomFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MeetingRoom Thermostat Dual SP Control; !- Control 1 Name @@ -20087,6 +20126,7 @@ MechanicalRoomFlr1 Thermostat, !- Name MechanicalRoomFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20094,6 +20134,7 @@ EmployeeLoungeFlr1 Thermostat, !- Name EmployeeLoungeFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20101,6 +20142,7 @@ ExerciseCenterFlr1 Thermostat, !- Name ExerciseCenterFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20108,6 +20150,7 @@ FrontOfficeFlr1 Thermostat, !- Name FrontOfficeFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name @@ -20115,6 +20158,7 @@ FrontStairsFlr1 Thermostat, !- Name FrontStairsFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20122,6 +20166,7 @@ RearStairsFlr2 Thermostat, !- Name RearStairsFlr2, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20129,6 +20174,7 @@ FrontStairsFlr2 Thermostat, !- Name FrontStairsFlr2, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20136,6 +20182,7 @@ RearStairsFlr3 Thermostat, !- Name RearStairsFlr3, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20143,6 +20190,7 @@ FrontStairsFlr3 Thermostat, !- Name FrontStairsFlr3, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20150,6 +20198,7 @@ RearStairsFlr4 Thermostat, !- Name RearStairsFlr4, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20157,6 +20206,7 @@ FrontStairsFlr4 Thermostat, !- Name FrontStairsFlr4, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 1, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SemiHeated_HtgSP; !- Control 1 Name @@ -20164,6 +20214,7 @@ CorridorFlr1 Thermostat, !- Name CorridorFlr1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20171,6 +20222,7 @@ CorridorFlr2 Thermostat, !- Name CorridorFlr2, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20178,6 +20230,7 @@ CorridorFlr3 Thermostat, !- Name CorridorFlr3, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name @@ -20185,6 +20238,7 @@ CorridorFlr4 Thermostat, !- Name CorridorFlr4, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CommonArea Thermostat Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver.idf b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver.idf index 6105919f309..2d4b5fe4b6c 100644 --- a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver.idf @@ -8610,6 +8610,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -8617,6 +8618,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -8624,6 +8626,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -8631,6 +8634,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -8638,6 +8642,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -8645,6 +8650,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -8652,6 +8658,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -8659,6 +8666,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -8666,6 +8674,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -8673,6 +8682,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -8680,6 +8690,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -8687,6 +8698,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -8694,6 +8706,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -8701,6 +8714,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -8708,6 +8722,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -8715,6 +8730,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name @@ -8722,6 +8738,7 @@ DataCenter Basement Thermostat, !- Name DataCenter_basement_ZN_6,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8729,6 +8746,7 @@ DataCenter bot Thermostat, !- Name DataCenter_bot_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8736,6 +8754,7 @@ DataCenter mid Thermostat, !- Name DataCenter_mid_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8743,6 +8762,7 @@ DataCenter top Thermostat, !- Name DataCenter_top_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205.idf b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205.idf index d4a17f7aea5..a9b8c289439 100644 --- a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205.idf +++ b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205.idf @@ -8610,6 +8610,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -8617,6 +8618,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -8624,6 +8626,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -8631,6 +8634,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -8638,6 +8642,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -8645,6 +8650,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -8652,6 +8658,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -8659,6 +8666,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -8666,6 +8674,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -8673,6 +8682,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -8680,6 +8690,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -8687,6 +8698,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -8694,6 +8706,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -8701,6 +8714,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -8708,6 +8722,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -8715,6 +8730,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name @@ -8722,6 +8738,7 @@ DataCenter Basement Thermostat, !- Name DataCenter_basement_ZN_6,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8729,6 +8746,7 @@ DataCenter bot Thermostat, !- Name DataCenter_bot_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8736,6 +8754,7 @@ DataCenter mid Thermostat, !- Name DataCenter_mid_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8743,6 +8762,7 @@ DataCenter top Thermostat, !- Name DataCenter_top_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205_Detailed.idf b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205_Detailed.idf index 60e75077adb..8a1a85b57e6 100644 --- a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205_Detailed.idf +++ b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_Chiller205_Detailed.idf @@ -8610,6 +8610,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -8617,6 +8618,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -8624,6 +8626,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -8631,6 +8634,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -8638,6 +8642,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -8645,6 +8650,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -8652,6 +8658,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -8659,6 +8666,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -8666,6 +8674,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -8673,6 +8682,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -8680,6 +8690,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -8687,6 +8698,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -8694,6 +8706,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -8701,6 +8714,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -8708,6 +8722,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -8715,6 +8730,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name @@ -8722,6 +8738,7 @@ DataCenter Basement Thermostat, !- Name DataCenter_basement_ZN_6,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8729,6 +8746,7 @@ DataCenter bot Thermostat, !- Name DataCenter_bot_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8736,6 +8754,7 @@ DataCenter mid Thermostat, !- Name DataCenter_mid_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8743,6 +8762,7 @@ DataCenter top Thermostat, !- Name DataCenter_top_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_ChillerEIR.idf b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_ChillerEIR.idf index 03bc01d74c8..e4a8ea4de16 100644 --- a/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_ChillerEIR.idf +++ b/testfiles/ASHRAE901_OfficeLarge_STD2019_Denver_ChillerEIR.idf @@ -8610,6 +8610,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -8617,6 +8618,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -8624,6 +8626,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -8631,6 +8634,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -8638,6 +8642,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -8645,6 +8650,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -8652,6 +8658,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -8659,6 +8666,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -8666,6 +8674,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -8673,6 +8682,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -8680,6 +8690,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -8687,6 +8698,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -8694,6 +8706,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -8701,6 +8714,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -8708,6 +8722,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -8715,6 +8730,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name @@ -8722,6 +8738,7 @@ DataCenter Basement Thermostat, !- Name DataCenter_basement_ZN_6,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8729,6 +8746,7 @@ DataCenter bot Thermostat, !- Name DataCenter_bot_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8736,6 +8754,7 @@ DataCenter mid Thermostat, !- Name DataCenter_mid_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name @@ -8743,6 +8762,7 @@ DataCenter top Thermostat, !- Name DataCenter_top_ZN_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DataCenter Cooling Setpoints Dual SP Control; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeMedium_STD2019_Denver.idf b/testfiles/ASHRAE901_OfficeMedium_STD2019_Denver.idf index a47b4b76ec9..ab53ac0af46 100644 --- a/testfiles/ASHRAE901_OfficeMedium_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_OfficeMedium_STD2019_Denver.idf @@ -6850,6 +6850,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6857,6 +6858,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6864,6 +6866,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6871,6 +6874,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6878,6 +6882,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6885,6 +6890,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6892,6 +6898,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name @@ -6899,6 +6906,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6906,6 +6914,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6913,6 +6922,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6920,6 +6930,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6927,6 +6938,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6934,6 +6946,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6941,6 +6954,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6948,6 +6962,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OfficeSmall_STD2019_Denver.idf b/testfiles/ASHRAE901_OfficeSmall_STD2019_Denver.idf index bde04ce0a44..d4ee23a1334 100644 --- a/testfiles/ASHRAE901_OfficeSmall_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_OfficeSmall_STD2019_Denver.idf @@ -3835,6 +3835,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -3842,6 +3843,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -3849,6 +3851,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -3856,6 +3859,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3863,6 +3867,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_OutPatientHealthCare_STD2019_Denver.idf b/testfiles/ASHRAE901_OutPatientHealthCare_STD2019_Denver.idf index c9f4af0de90..0af650be440 100644 --- a/testfiles/ASHRAE901_OutPatientHealthCare_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_OutPatientHealthCare_STD2019_Denver.idf @@ -39681,6 +39681,7 @@ Floor 1 Anesthesia Thermostat, !- Name Floor 1 Anesthesia, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Anesthesia DualSPSched; !- Control 1 Name @@ -39688,6 +39689,7 @@ Floor 1 Bio Haz Thermostat, !- Name Floor 1 Bio Haz, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Bio Haz DualSPSched; !- Control 1 Name @@ -39695,6 +39697,7 @@ Floor 1 Cafe Thermostat, !- Name Floor 1 Cafe, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Cafe DualSPSched;!- Control 1 Name @@ -39702,6 +39705,7 @@ Floor 1 Clean Thermostat,!- Name Floor 1 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Clean DualSPSched; !- Control 1 Name @@ -39709,6 +39713,7 @@ Floor 1 Clean Work Thermostat, !- Name Floor 1 Clean Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Clean Work DualSPSched; !- Control 1 Name @@ -39716,6 +39721,7 @@ Floor 1 Dictation Thermostat, !- Name Floor 1 Dictation, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Dictation DualSPSched; !- Control 1 Name @@ -39723,6 +39729,7 @@ Floor 1 Dressing Room Thermostat, !- Name Floor 1 Dressing Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Dressing Room DualSPSched; !- Control 1 Name @@ -39730,6 +39737,7 @@ Floor 1 Electrical Room Thermostat, !- Name Floor 1 Electrical Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Electrical Room DualSPSched; !- Control 1 Name @@ -39737,6 +39745,7 @@ Floor 1 Elevator Pump Room Thermostat, !- Name Floor 1 Elevator Pump Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Elevator Pump Room DualSPSched; !- Control 1 Name @@ -39744,6 +39753,7 @@ Floor 1 Humid Thermostat,!- Name Floor 1 Humid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Humid DualSPSched; !- Control 1 Name @@ -39751,6 +39761,7 @@ Floor 1 IT Hall Thermostat, !- Name Floor 1 IT Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 IT Hall DualSPSched; !- Control 1 Name @@ -39758,6 +39769,7 @@ Floor 1 IT Room Thermostat, !- Name Floor 1 IT Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 IT Room DualSPSched; !- Control 1 Name @@ -39765,6 +39777,7 @@ Floor 1 Lobby Thermostat,!- Name Floor 1 Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby DualSPSched; !- Control 1 Name @@ -39772,6 +39785,7 @@ Floor 1 Lobby Hall Thermostat, !- Name Floor 1 Lobby Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby Hall DualSPSched; !- Control 1 Name @@ -39779,6 +39793,7 @@ Floor 1 Lobby Toilet Thermostat, !- Name Floor 1 Lobby Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby Toilet DualSPSched; !- Control 1 Name @@ -39786,6 +39801,7 @@ Floor 1 Locker Room Thermostat, !- Name Floor 1 Locker Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Locker Room DualSPSched; !- Control 1 Name @@ -39793,6 +39809,7 @@ Floor 1 Locker Room Hall Thermostat, !- Name Floor 1 Locker Room Hall,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Locker Room Hall DualSPSched; !- Control 1 Name @@ -39800,6 +39817,7 @@ Floor 1 Lounge Thermostat, !- Name Floor 1 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lounge DualSPSched; !- Control 1 Name @@ -39807,6 +39825,7 @@ Floor 1 Med Gas Thermostat, !- Name Floor 1 Med Gas, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Med Gas DualSPSched; !- Control 1 Name @@ -39814,6 +39833,7 @@ Floor 1 MRI Control Room Thermostat, !- Name Floor 1 MRI Control Room,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 MRI Control Room DualSPSched; !- Control 1 Name @@ -39821,6 +39841,7 @@ Floor 1 MRI Hall Thermostat, !- Name Floor 1 MRI Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 MRI Hall DualSPSched; !- Control 1 Name @@ -39828,6 +39849,7 @@ Floor 1 MRI Room Thermostat, !- Name Floor 1 MRI Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 MRI Room DualSPSched; !- Control 1 Name @@ -39835,6 +39857,7 @@ Floor 1 MRI Toilet Thermostat, !- Name Floor 1 MRI Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 MRI Toilet DualSPSched; !- Control 1 Name @@ -39842,6 +39865,7 @@ Floor 1 Nourishment Thermostat, !- Name Floor 1 Nourishment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Nourishment DualSPSched; !- Control 1 Name @@ -39849,6 +39873,7 @@ Floor 1 Nurse Hall Thermostat, !- Name Floor 1 Nurse Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Nurse Hall DualSPSched; !- Control 1 Name @@ -39856,6 +39881,7 @@ Floor 1 Nurse Janitor Thermostat, !- Name Floor 1 Nurse Janitor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Nurse Janitor DualSPSched; !- Control 1 Name @@ -39863,6 +39889,7 @@ Floor 1 Nurse Station Thermostat, !- Name Floor 1 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Nurse Station DualSPSched; !- Control 1 Name @@ -39870,6 +39897,7 @@ Floor 1 Nurse Toilet Thermostat, !- Name Floor 1 Nurse Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Nurse Toilet DualSPSched; !- Control 1 Name @@ -39877,6 +39905,7 @@ Floor 1 Office Thermostat, !- Name Floor 1 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office DualSPSched; !- Control 1 Name @@ -39884,6 +39913,7 @@ Floor 1 Operating Room 1 Thermostat, !- Name Floor 1 Operating Room 1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Operating Room 1 DualSPSched; !- Control 1 Name @@ -39891,6 +39921,7 @@ Floor 1 Operating Room 2 Thermostat, !- Name Floor 1 Operating Room 2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Operating Room 2 DualSPSched; !- Control 1 Name @@ -39898,6 +39929,7 @@ Floor 1 Operating Room 3 Thermostat, !- Name Floor 1 Operating Room 3,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Operating Room 3 DualSPSched; !- Control 1 Name @@ -39905,6 +39937,7 @@ Floor 1 PACU Thermostat, !- Name Floor 1 PACU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 PACU DualSPSched;!- Control 1 Name @@ -39912,6 +39945,7 @@ Floor 1 Pre-Op Hall Thermostat, !- Name Floor 1 Pre-Op Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pre-Op Hall DualSPSched; !- Control 1 Name @@ -39919,6 +39953,7 @@ Floor 1 Pre-Op Room 1 Thermostat, !- Name Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pre-Op Room 1 DualSPSched; !- Control 1 Name @@ -39926,6 +39961,7 @@ Floor 1 Pre-Op Room 2 Thermostat, !- Name Floor 1 Pre-Op Room 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pre-Op Room 2 DualSPSched; !- Control 1 Name @@ -39933,6 +39969,7 @@ Floor 1 Pre-Op Toilet Thermostat, !- Name Floor 1 Pre-Op Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pre-Op Toilet DualSPSched; !- Control 1 Name @@ -39940,6 +39977,7 @@ Floor 1 Procedure Room Thermostat, !- Name Floor 1 Procedure Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Procedure Room DualSPSched; !- Control 1 Name @@ -39947,6 +39985,7 @@ Floor 1 Reception Thermostat, !- Name Floor 1 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Reception DualSPSched; !- Control 1 Name @@ -39954,6 +39993,7 @@ Floor 1 Reception Hall Thermostat, !- Name Floor 1 Reception Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Reception Hall DualSPSched; !- Control 1 Name @@ -39961,6 +40001,7 @@ Floor 1 Recovery Room Thermostat, !- Name Floor 1 Recovery Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Recovery Room DualSPSched; !- Control 1 Name @@ -39968,6 +40009,7 @@ Floor 1 Scheduling Thermostat, !- Name Floor 1 Scheduling, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Scheduling DualSPSched; !- Control 1 Name @@ -39975,6 +40017,7 @@ Floor 1 Scrub Thermostat,!- Name Floor 1 Scrub, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Scrub DualSPSched; !- Control 1 Name @@ -39982,6 +40025,7 @@ Floor 1 Soil Thermostat, !- Name Floor 1 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil DualSPSched;!- Control 1 Name @@ -39989,6 +40033,7 @@ Floor 1 Soil Hold Thermostat, !- Name Floor 1 Soil Hold, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil Hold DualSPSched; !- Control 1 Name @@ -39996,6 +40041,7 @@ Floor 1 Soil Work Thermostat, !- Name Floor 1 Soil Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil Work DualSPSched; !- Control 1 Name @@ -40003,6 +40049,7 @@ Floor 1 Step Down Thermostat, !- Name Floor 1 Step Down, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Step Down DualSPSched; !- Control 1 Name @@ -40010,6 +40057,7 @@ Floor 1 Sterile Hall Thermostat, !- Name Floor 1 Sterile Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Sterile Hall DualSPSched; !- Control 1 Name @@ -40017,6 +40065,7 @@ Floor 1 Sterile Storage Thermostat, !- Name Floor 1 Sterile Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Sterile Storage DualSPSched; !- Control 1 Name @@ -40024,6 +40073,7 @@ Floor 1 Storage Thermostat, !- Name Floor 1 Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Storage DualSPSched; !- Control 1 Name @@ -40031,6 +40081,7 @@ Floor 1 Sub-Sterile Thermostat, !- Name Floor 1 Sub-Sterile, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Sub-Sterile DualSPSched; !- Control 1 Name @@ -40038,6 +40089,7 @@ Floor 1 Utility Hall Thermostat, !- Name Floor 1 Utility Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Utility Hall DualSPSched; !- Control 1 Name @@ -40045,6 +40097,7 @@ Floor 1 Utility Janitor Thermostat, !- Name Floor 1 Utility Janitor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Utility Janitor DualSPSched; !- Control 1 Name @@ -40052,6 +40105,7 @@ Floor 1 Utility Room Thermostat, !- Name Floor 1 Utility Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Utility Room DualSPSched; !- Control 1 Name @@ -40059,6 +40113,7 @@ Floor 1 Vestibule Thermostat, !- Name Floor 1 Vestibule, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Vestibule DualSPSched; !- Control 1 Name @@ -40066,6 +40121,7 @@ Floor 2 Conference Thermostat, !- Name Floor 2 Conference, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Conference DualSPSched; !- Control 1 Name @@ -40073,6 +40129,7 @@ Floor 2 Conference Toilet Thermostat, !- Name Floor 2 Conference Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Conference Toilet DualSPSched; !- Control 1 Name @@ -40080,6 +40137,7 @@ Floor 2 Dictation Thermostat, !- Name Floor 2 Dictation, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Dictation DualSPSched; !- Control 1 Name @@ -40087,6 +40145,7 @@ Floor 2 Exam 1 Thermostat, !- Name Floor 2 Exam 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 1 DualSPSched; !- Control 1 Name @@ -40094,6 +40153,7 @@ Floor 2 Exam 2 Thermostat, !- Name Floor 2 Exam 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 2 DualSPSched; !- Control 1 Name @@ -40101,6 +40161,7 @@ Floor 2 Exam 3 Thermostat, !- Name Floor 2 Exam 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 3 DualSPSched; !- Control 1 Name @@ -40108,6 +40169,7 @@ Floor 2 Exam 4 Thermostat, !- Name Floor 2 Exam 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 4 DualSPSched; !- Control 1 Name @@ -40115,6 +40177,7 @@ Floor 2 Exam 5 Thermostat, !- Name Floor 2 Exam 5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 5 DualSPSched; !- Control 1 Name @@ -40122,6 +40185,7 @@ Floor 2 Exam 6 Thermostat, !- Name Floor 2 Exam 6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 6 DualSPSched; !- Control 1 Name @@ -40129,6 +40193,7 @@ Floor 2 Exam 7 Thermostat, !- Name Floor 2 Exam 7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 7 DualSPSched; !- Control 1 Name @@ -40136,6 +40201,7 @@ Floor 2 Exam 8 Thermostat, !- Name Floor 2 Exam 8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 8 DualSPSched; !- Control 1 Name @@ -40143,6 +40209,7 @@ Floor 2 Exam 9 Thermostat, !- Name Floor 2 Exam 9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 9 DualSPSched; !- Control 1 Name @@ -40150,6 +40217,7 @@ Floor 2 Exam Hall 1 Thermostat, !- Name Floor 2 Exam Hall 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 1 DualSPSched; !- Control 1 Name @@ -40157,6 +40225,7 @@ Floor 2 Exam Hall 2 Thermostat, !- Name Floor 2 Exam Hall 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 2 DualSPSched; !- Control 1 Name @@ -40164,6 +40233,7 @@ Floor 2 Exam Hall 3 Thermostat, !- Name Floor 2 Exam Hall 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 3 DualSPSched; !- Control 1 Name @@ -40171,6 +40241,7 @@ Floor 2 Exam Hall 4 Thermostat, !- Name Floor 2 Exam Hall 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 4 DualSPSched; !- Control 1 Name @@ -40178,6 +40249,7 @@ Floor 2 Exam Hall 5 Thermostat, !- Name Floor 2 Exam Hall 5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 5 DualSPSched; !- Control 1 Name @@ -40185,6 +40257,7 @@ Floor 2 Exam Hall 6 Thermostat, !- Name Floor 2 Exam Hall 6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam Hall 6 DualSPSched; !- Control 1 Name @@ -40192,6 +40265,7 @@ Floor 2 Janitor Thermostat, !- Name Floor 2 Janitor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Janitor DualSPSched; !- Control 1 Name @@ -40199,6 +40273,7 @@ Floor 2 Lounge Thermostat, !- Name Floor 2 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge DualSPSched; !- Control 1 Name @@ -40206,6 +40281,7 @@ Floor 2 Nurse Station 1 Thermostat, !- Name Floor 2 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -40213,6 +40289,7 @@ Floor 2 Nurse Station 2 Thermostat, !- Name Floor 2 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -40220,6 +40297,7 @@ Floor 2 Office Thermostat, !- Name Floor 2 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office DualSPSched; !- Control 1 Name @@ -40227,6 +40305,7 @@ Floor 2 Office Hall Thermostat, !- Name Floor 2 Office Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office Hall DualSPSched; !- Control 1 Name @@ -40234,6 +40313,7 @@ Floor 2 Reception Thermostat, !- Name Floor 2 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception DualSPSched; !- Control 1 Name @@ -40241,6 +40321,7 @@ Floor 2 Reception Hall Thermostat, !- Name Floor 2 Reception Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception Hall DualSPSched; !- Control 1 Name @@ -40248,6 +40329,7 @@ Floor 2 Reception Toilet Thermostat, !- Name Floor 2 Reception Toilet,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception Toilet DualSPSched; !- Control 1 Name @@ -40255,6 +40337,7 @@ Floor 2 Scheduling 1 Thermostat, !- Name Floor 2 Scheduling 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Scheduling 1 DualSPSched; !- Control 1 Name @@ -40262,6 +40345,7 @@ Floor 2 Scheduling 2 Thermostat, !- Name Floor 2 Scheduling 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Scheduling 2 DualSPSched; !- Control 1 Name @@ -40269,6 +40353,7 @@ Floor 2 Storage 1 Thermostat, !- Name Floor 2 Storage 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 1 DualSPSched; !- Control 1 Name @@ -40276,6 +40361,7 @@ Floor 2 Storage 2 Thermostat, !- Name Floor 2 Storage 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 2 DualSPSched; !- Control 1 Name @@ -40283,6 +40369,7 @@ Floor 2 Storage 3 Thermostat, !- Name Floor 2 Storage 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 3 DualSPSched; !- Control 1 Name @@ -40290,6 +40377,7 @@ Floor 2 Utility Thermostat, !- Name Floor 2 Utility, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Utility DualSPSched; !- Control 1 Name @@ -40297,6 +40385,7 @@ Floor 2 Work Thermostat, !- Name Floor 2 Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Work DualSPSched;!- Control 1 Name @@ -40304,6 +40393,7 @@ Floor 2 Work Hall Thermostat, !- Name Floor 2 Work Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Work Hall DualSPSched; !- Control 1 Name @@ -40311,6 +40401,7 @@ Floor 2 Work Toilet Thermostat, !- Name Floor 2 Work Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Work Toilet DualSPSched; !- Control 1 Name @@ -40318,6 +40409,7 @@ Floor 2 X-Ray Thermostat,!- Name Floor 2 X-Ray, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 X-Ray DualSPSched; !- Control 1 Name @@ -40325,6 +40417,7 @@ Floor 3 Dressing Room Thermostat, !- Name Floor 3 Dressing Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Dressing Room DualSPSched; !- Control 1 Name @@ -40332,6 +40425,7 @@ Floor 3 Elevator Hall Thermostat, !- Name Floor 3 Elevator Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Elevator Hall DualSPSched; !- Control 1 Name @@ -40339,6 +40433,7 @@ Floor 3 Humid Thermostat,!- Name Floor 3 Humid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Humid DualSPSched; !- Control 1 Name @@ -40346,6 +40441,7 @@ Floor 3 Janitor Thermostat, !- Name Floor 3 Janitor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Janitor DualSPSched; !- Control 1 Name @@ -40353,6 +40449,7 @@ Floor 3 Locker Thermostat, !- Name Floor 3 Locker, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Locker DualSPSched; !- Control 1 Name @@ -40360,6 +40457,7 @@ Floor 3 Lounge Thermostat, !- Name Floor 3 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Lounge DualSPSched; !- Control 1 Name @@ -40367,6 +40465,7 @@ Floor 3 Lounge Toilet Thermostat, !- Name Floor 3 Lounge Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Lounge Toilet DualSPSched; !- Control 1 Name @@ -40374,6 +40473,7 @@ Floor 3 Mechanical Thermostat, !- Name Floor 3 Mechanical, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Mechanical DualSPSched; !- Control 1 Name @@ -40381,6 +40481,7 @@ Floor 3 Mechanical Hall Thermostat, !- Name Floor 3 Mechanical Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Mechanical Hall DualSPSched; !- Control 1 Name @@ -40388,6 +40489,7 @@ Floor 3 Office Thermostat, !- Name Floor 3 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office DualSPSched; !- Control 1 Name @@ -40395,6 +40497,7 @@ Floor 3 Office Hall Thermostat, !- Name Floor 3 Office Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office Hall DualSPSched; !- Control 1 Name @@ -40402,6 +40505,7 @@ Floor 3 Office Toilet Thermostat, !- Name Floor 3 Office Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office Toilet DualSPSched; !- Control 1 Name @@ -40409,6 +40513,7 @@ Floor 3 Physical Therapy 1 Thermostat, !- Name Floor 3 Physical Therapy 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Physical Therapy 1 DualSPSched; !- Control 1 Name @@ -40416,6 +40521,7 @@ Floor 3 Physical Therapy 2 Thermostat, !- Name Floor 3 Physical Therapy 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Physical Therapy 2 DualSPSched; !- Control 1 Name @@ -40423,6 +40529,7 @@ Floor 3 Physical Therapy Toilet Thermostat, !- Name Floor 3 Physical Therapy Toilet, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Physical Therapy Toilet DualSPSched; !- Control 1 Name @@ -40430,6 +40537,7 @@ Floor 3 Storage 1 Thermostat, !- Name Floor 3 Storage 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Storage 1 DualSPSched; !- Control 1 Name @@ -40437,6 +40545,7 @@ Floor 3 Storage 2 Thermostat, !- Name Floor 3 Storage 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Storage 2 DualSPSched; !- Control 1 Name @@ -40444,6 +40553,7 @@ Floor 3 Treatment Thermostat, !- Name Floor 3 Treatment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Treatment DualSPSched; !- Control 1 Name @@ -40451,6 +40561,7 @@ Floor 3 Undeveloped 1 Thermostat, !- Name Floor 3 Undeveloped 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Undeveloped 1 DualSPSched; !- Control 1 Name @@ -40458,6 +40569,7 @@ Floor 3 Undeveloped 2 Thermostat, !- Name Floor 3 Undeveloped 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Undeveloped 2 DualSPSched; !- Control 1 Name @@ -40465,6 +40577,7 @@ Floor 3 Utility Thermostat, !- Name Floor 3 Utility, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Utility DualSPSched; !- Control 1 Name @@ -40472,6 +40585,7 @@ Floor 3 Work Thermostat, !- Name Floor 3 Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Work DualSPSched;!- Control 1 Name @@ -40479,6 +40593,7 @@ NE Stair Thermostat, !- Name NE Stair, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NE Stair DualSPSched; !- Control 1 Name @@ -40486,6 +40601,7 @@ NW Elevator Thermostat, !- Name NW Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NW Elevator DualSPSched; !- Control 1 Name @@ -40493,6 +40609,7 @@ NW Stair Thermostat, !- Name NW Stair, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NW Stair DualSPSched; !- Control 1 Name @@ -40500,6 +40617,7 @@ SW Stair Thermostat, !- Name SW Stair, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SW Stair DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_RestaurantFastFood_STD2019_Denver.idf b/testfiles/ASHRAE901_RestaurantFastFood_STD2019_Denver.idf index 8a6463f381f..791c14167ed 100644 --- a/testfiles/ASHRAE901_RestaurantFastFood_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_RestaurantFastFood_STD2019_Denver.idf @@ -2819,6 +2819,7 @@ Dining Thermostat, !- Name Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining DualSPSched; !- Control 1 Name @@ -2826,6 +2827,7 @@ Kitchen Thermostat, !- Name Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_RestaurantSitDown_STD2019_Denver.idf b/testfiles/ASHRAE901_RestaurantSitDown_STD2019_Denver.idf index 558f648de19..da7aa143a55 100644 --- a/testfiles/ASHRAE901_RestaurantSitDown_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_RestaurantSitDown_STD2019_Denver.idf @@ -2884,6 +2884,7 @@ Dining Thermostat, !- Name Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining DualSPSched; !- Control 1 Name @@ -2891,6 +2892,7 @@ Kitchen Thermostat, !- Name Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_RetailStandalone_STD2019_Denver.idf b/testfiles/ASHRAE901_RetailStandalone_STD2019_Denver.idf index 929625f66ff..e8ee2c31827 100644 --- a/testfiles/ASHRAE901_RetailStandalone_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_RetailStandalone_STD2019_Denver.idf @@ -3833,6 +3833,7 @@ Back_Space Thermostat, !- Name Back_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Back_Space DualSPSched; !- Control 1 Name @@ -3840,6 +3841,7 @@ Core_Retail Thermostat, !- Name Core_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_Retail DualSPSched; !- Control 1 Name @@ -3847,6 +3849,7 @@ Point_Of_Sale Thermostat,!- Name Point_Of_Sale, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Point_Of_Sale DualSPSched; !- Control 1 Name @@ -3854,6 +3857,7 @@ Front_Retail Thermostat, !- Name Front_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Retail DualSPSched;!- Control 1 Name @@ -3861,6 +3865,7 @@ Front_Entry Thermostat, !- Name Front_Entry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Entry DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_RetailStripmall_STD2019_Denver.idf b/testfiles/ASHRAE901_RetailStripmall_STD2019_Denver.idf index acbf1c728b6..9c1d1723cfc 100644 --- a/testfiles/ASHRAE901_RetailStripmall_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_RetailStripmall_STD2019_Denver.idf @@ -5756,6 +5756,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -5763,6 +5764,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -5770,6 +5772,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -5777,6 +5780,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -5784,6 +5788,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -5791,6 +5796,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -5798,6 +5804,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -5805,6 +5812,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -5812,6 +5820,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -5819,6 +5828,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_SchoolPrimary_STD2019_Denver.idf b/testfiles/ASHRAE901_SchoolPrimary_STD2019_Denver.idf index 383438626b4..95b860ce96c 100644 --- a/testfiles/ASHRAE901_SchoolPrimary_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_SchoolPrimary_STD2019_Denver.idf @@ -11597,6 +11597,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11604,6 +11605,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11611,6 +11613,7 @@ Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11618,6 +11621,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11625,6 +11629,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11632,6 +11637,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11639,6 +11645,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11646,6 +11653,7 @@ Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11653,6 +11661,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11660,6 +11669,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11667,6 +11677,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11674,6 +11685,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11681,6 +11693,7 @@ Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11688,6 +11701,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11695,6 +11709,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11702,6 +11717,7 @@ Computer_Class_ZN_1_FLR_1 Thermostat, !- Name Computer_Class_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Computer_Class_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11709,6 +11725,7 @@ Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11716,6 +11733,7 @@ Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11723,6 +11741,7 @@ Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11730,6 +11749,7 @@ Bath_ZN_1_FLR_1 Thermostat, !- Name Bath_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bath_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11737,6 +11757,7 @@ Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11744,6 +11765,7 @@ Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11751,6 +11773,7 @@ Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11758,6 +11781,7 @@ Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -11765,6 +11789,7 @@ Library_Media_Center_ZN_1_FLR_1 Thermostat, !- Name Library_Media_Center_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Library_Media_Center_ZN_1_FLR_1 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_SchoolSecondary_STD2019_Denver.idf b/testfiles/ASHRAE901_SchoolSecondary_STD2019_Denver.idf index c8ec163e3f9..9ecef03a29d 100644 --- a/testfiles/ASHRAE901_SchoolSecondary_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_SchoolSecondary_STD2019_Denver.idf @@ -19371,6 +19371,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19378,6 +19379,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19385,6 +19387,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19392,6 +19395,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19399,6 +19403,7 @@ Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19406,6 +19411,7 @@ Corridor_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19413,6 +19419,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19420,6 +19427,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19427,6 +19435,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19434,6 +19443,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19441,6 +19451,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19448,6 +19459,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19455,6 +19467,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19462,6 +19475,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19469,6 +19483,7 @@ Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19476,6 +19491,7 @@ Corridor_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19483,6 +19499,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19490,6 +19507,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19497,6 +19515,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19504,6 +19523,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19511,6 +19531,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19518,6 +19539,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19525,6 +19547,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19532,6 +19555,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19539,6 +19563,7 @@ Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19546,6 +19571,7 @@ Corridor_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19553,6 +19579,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19560,6 +19587,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19567,6 +19595,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19574,6 +19603,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19581,6 +19611,7 @@ Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19588,6 +19619,7 @@ Main_Corridor_ZN_1_FLR_2 Thermostat, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19595,6 +19627,7 @@ Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19602,6 +19635,7 @@ Lobby_ZN_1_FLR_2 Thermostat, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19609,6 +19643,7 @@ Bathrooms_ZN_1_FLR_1 Thermostat, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19616,6 +19651,7 @@ Bathrooms_ZN_1_FLR_2 Thermostat, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19623,6 +19659,7 @@ Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19630,6 +19667,7 @@ Offices_ZN_1_FLR_2 Thermostat, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19637,6 +19675,7 @@ Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19644,6 +19683,7 @@ Aux_Gym_ZN_1_FLR_1 Thermostat, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Aux_Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19651,6 +19691,7 @@ Auditorium_ZN_1_FLR_1 Thermostat, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Auditorium_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19658,6 +19699,7 @@ Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19665,6 +19707,7 @@ LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Thermostat, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -19672,6 +19715,7 @@ Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19679,6 +19723,7 @@ Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -19686,6 +19731,7 @@ Mech_ZN_1_FLR_2 Thermostat, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/ASHRAE901_Warehouse_STD2019_Denver.idf b/testfiles/ASHRAE901_Warehouse_STD2019_Denver.idf index 6bba20306a2..4cc7e905ab2 100644 --- a/testfiles/ASHRAE901_Warehouse_STD2019_Denver.idf +++ b/testfiles/ASHRAE901_Warehouse_STD2019_Denver.idf @@ -4741,6 +4741,7 @@ Zone1 Office Thermostat, !- Name Zone1 Office, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name @@ -4748,6 +4749,7 @@ Zone2 Fine Storage Thermostat, !- Name Zone2 Fine Storage, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Fine Storage Thermostat Dual SP Control; !- Control 1 Name @@ -4755,6 +4757,7 @@ Zone 3 Thermostat, !- Name Zone3 Bulk Storage, !- Zone or ZoneList Name ZoneControlSchedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB;!- Control 1 Name diff --git a/testfiles/ASIHPMixedTank.idf b/testfiles/ASIHPMixedTank.idf index a7278b52727..89b7eb2c436 100644 --- a/testfiles/ASIHPMixedTank.idf +++ b/testfiles/ASIHPMixedTank.idf @@ -2755,6 +2755,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AbsorptionChiller.idf b/testfiles/AbsorptionChiller.idf index d886f03dd47..349c35b6aa2 100644 --- a/testfiles/AbsorptionChiller.idf +++ b/testfiles/AbsorptionChiller.idf @@ -1990,6 +1990,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1999,6 +2000,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2008,6 +2010,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AbsorptionChiller_Macro.imf b/testfiles/AbsorptionChiller_Macro.imf index d4f7a9daef3..ec687164061 100644 --- a/testfiles/AbsorptionChiller_Macro.imf +++ b/testfiles/AbsorptionChiller_Macro.imf @@ -1415,6 +1415,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1424,6 +1425,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1433,6 +1435,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AdaptiveThermostatASH55_5Zone_Miami.idf b/testfiles/AdaptiveThermostatASH55_5Zone_Miami.idf index aca559ba26e..208ef73d738 100644 --- a/testfiles/AdaptiveThermostatASH55_5Zone_Miami.idf +++ b/testfiles/AdaptiveThermostatASH55_5Zone_Miami.idf @@ -2635,6 +2635,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/AdvancedOutput/ExerciseOutput1.idf b/testfiles/AdvancedOutput/ExerciseOutput1.idf index 4605d12bb34..3c27ef9b860 100644 --- a/testfiles/AdvancedOutput/ExerciseOutput1.idf +++ b/testfiles/AdvancedOutput/ExerciseOutput1.idf @@ -1299,6 +1299,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE ONE DualSPSched; !- Control 1 Name diff --git a/testfiles/AdvancedOutput/ExerciseOutput1A-Solution.idf b/testfiles/AdvancedOutput/ExerciseOutput1A-Solution.idf index 3f8925cfa97..3c8a72c914d 100644 --- a/testfiles/AdvancedOutput/ExerciseOutput1A-Solution.idf +++ b/testfiles/AdvancedOutput/ExerciseOutput1A-Solution.idf @@ -1299,6 +1299,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE ONE DualSPSched; !- Control 1 Name diff --git a/testfiles/AirCooledElectricChiller.idf b/testfiles/AirCooledElectricChiller.idf index f275acad8fe..b563a2115c2 100644 --- a/testfiles/AirCooledElectricChiller.idf +++ b/testfiles/AirCooledElectricChiller.idf @@ -1730,6 +1730,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1739,6 +1740,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1748,6 +1750,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AirEconomizerFaults_RefBldgLargeOfficeNew2004_Chicago.idf b/testfiles/AirEconomizerFaults_RefBldgLargeOfficeNew2004_Chicago.idf index 76b82b788b1..025eaf743d9 100644 --- a/testfiles/AirEconomizerFaults_RefBldgLargeOfficeNew2004_Chicago.idf +++ b/testfiles/AirEconomizerFaults_RefBldgLargeOfficeNew2004_Chicago.idf @@ -6198,6 +6198,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6205,6 +6206,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6212,6 +6214,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6219,6 +6222,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6226,6 +6230,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6233,6 +6238,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6240,6 +6246,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6247,6 +6254,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6254,6 +6262,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6261,6 +6270,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6268,6 +6278,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6275,6 +6286,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6282,6 +6294,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6289,6 +6302,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6296,6 +6310,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6303,6 +6318,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/AirEconomizerWithMaxMinOAFractions.idf b/testfiles/AirEconomizerWithMaxMinOAFractions.idf index 8bc34b96f0a..030cad66d3d 100644 --- a/testfiles/AirEconomizerWithMaxMinOAFractions.idf +++ b/testfiles/AirEconomizerWithMaxMinOAFractions.idf @@ -1931,6 +1931,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2050,6 +2051,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2169,6 +2171,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2288,6 +2291,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2407,6 +2411,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_Attic_Duct.idf b/testfiles/AirflowNetwork_Attic_Duct.idf index 883c0aed916..5cc0e6076c2 100644 --- a/testfiles/AirflowNetwork_Attic_Duct.idf +++ b/testfiles/AirflowNetwork_Attic_Duct.idf @@ -1323,6 +1323,7 @@ Zone Thermostat, !- Name Occupied Thermal Zone, !- Zone or ZoneList Name New Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MULTIZONE_House_DuctSizing.idf b/testfiles/AirflowNetwork_MULTIZONE_House_DuctSizing.idf index e5469f8af4f..f779a3df171 100644 --- a/testfiles/AirflowNetwork_MULTIZONE_House_DuctSizing.idf +++ b/testfiles/AirflowNetwork_MULTIZONE_House_DuctSizing.idf @@ -1942,6 +1942,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiAirLoops.idf b/testfiles/AirflowNetwork_MultiAirLoops.idf index 74af1e725c1..83d482aafa0 100644 --- a/testfiles/AirflowNetwork_MultiAirLoops.idf +++ b/testfiles/AirflowNetwork_MultiAirLoops.idf @@ -3304,6 +3304,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3311,6 +3312,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3392,6 +3394,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_House.idf b/testfiles/AirflowNetwork_MultiZone_House.idf index f8525c4ebf7..ce83cd13776 100644 --- a/testfiles/AirflowNetwork_MultiZone_House.idf +++ b/testfiles/AirflowNetwork_MultiZone_House.idf @@ -1937,6 +1937,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_House_FanModel.idf b/testfiles/AirflowNetwork_MultiZone_House_FanModel.idf index 7cdd6bbae25..dbe2747386d 100644 --- a/testfiles/AirflowNetwork_MultiZone_House_FanModel.idf +++ b/testfiles/AirflowNetwork_MultiZone_House_FanModel.idf @@ -1933,6 +1933,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_House_OvercoolDehumid.idf b/testfiles/AirflowNetwork_MultiZone_House_OvercoolDehumid.idf index a5b1316c953..663f94cf6a6 100644 --- a/testfiles/AirflowNetwork_MultiZone_House_OvercoolDehumid.idf +++ b/testfiles/AirflowNetwork_MultiZone_House_OvercoolDehumid.idf @@ -2281,6 +2281,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_House_TwoSpeed.idf b/testfiles/AirflowNetwork_MultiZone_House_TwoSpeed.idf index 1709f50a27e..afd05f39228 100644 --- a/testfiles/AirflowNetwork_MultiZone_House_TwoSpeed.idf +++ b/testfiles/AirflowNetwork_MultiZone_House_TwoSpeed.idf @@ -1954,6 +1954,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_LocalNode.idf b/testfiles/AirflowNetwork_MultiZone_LocalNode.idf index d1277cf5899..bcd56c278de 100644 --- a/testfiles/AirflowNetwork_MultiZone_LocalNode.idf +++ b/testfiles/AirflowNetwork_MultiZone_LocalNode.idf @@ -1940,6 +1940,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_SmallOffice.idf b/testfiles/AirflowNetwork_MultiZone_SmallOffice.idf index 6351c140447..c13a73eb49d 100644 --- a/testfiles/AirflowNetwork_MultiZone_SmallOffice.idf +++ b/testfiles/AirflowNetwork_MultiZone_SmallOffice.idf @@ -3012,6 +3012,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3019,6 +3020,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3026,6 +3028,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_SmallOffice_CoilHXAssistedDX.idf b/testfiles/AirflowNetwork_MultiZone_SmallOffice_CoilHXAssistedDX.idf index 6900060490b..e8d3de8a688 100644 --- a/testfiles/AirflowNetwork_MultiZone_SmallOffice_CoilHXAssistedDX.idf +++ b/testfiles/AirflowNetwork_MultiZone_SmallOffice_CoilHXAssistedDX.idf @@ -3061,6 +3061,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3068,6 +3069,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3075,6 +3077,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_SmallOffice_GenericContam.idf b/testfiles/AirflowNetwork_MultiZone_SmallOffice_GenericContam.idf index 6dbde515a5b..649d1dd1ec3 100644 --- a/testfiles/AirflowNetwork_MultiZone_SmallOffice_GenericContam.idf +++ b/testfiles/AirflowNetwork_MultiZone_SmallOffice_GenericContam.idf @@ -3058,6 +3058,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3065,6 +3066,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3072,6 +3074,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_SmallOffice_HeatRecoveryHXSL.idf b/testfiles/AirflowNetwork_MultiZone_SmallOffice_HeatRecoveryHXSL.idf index 2b7cc3fd0fd..c675ae2efe2 100644 --- a/testfiles/AirflowNetwork_MultiZone_SmallOffice_HeatRecoveryHXSL.idf +++ b/testfiles/AirflowNetwork_MultiZone_SmallOffice_HeatRecoveryHXSL.idf @@ -3104,6 +3104,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3111,6 +3112,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3118,6 +3120,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_MultiZone_SmallOffice_VAV.idf b/testfiles/AirflowNetwork_MultiZone_SmallOffice_VAV.idf index a4122861ad3..9e5cb88fea1 100644 --- a/testfiles/AirflowNetwork_MultiZone_SmallOffice_VAV.idf +++ b/testfiles/AirflowNetwork_MultiZone_SmallOffice_VAV.idf @@ -3309,6 +3309,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3316,6 +3317,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3323,6 +3325,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_PressureControl.idf b/testfiles/AirflowNetwork_PressureControl.idf index 6ff4b94a0f9..19c9aa7fc5f 100644 --- a/testfiles/AirflowNetwork_PressureControl.idf +++ b/testfiles/AirflowNetwork_PressureControl.idf @@ -3034,6 +3034,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3041,6 +3042,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3048,6 +3050,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_Simple_House.idf b/testfiles/AirflowNetwork_Simple_House.idf index 94bed50251c..37abaec2bff 100644 --- a/testfiles/AirflowNetwork_Simple_House.idf +++ b/testfiles/AirflowNetwork_Simple_House.idf @@ -1838,6 +1838,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowNetwork_Simple_SmallOffice.idf b/testfiles/AirflowNetwork_Simple_SmallOffice.idf index 84ed48ba9c5..09a8a0605a3 100644 --- a/testfiles/AirflowNetwork_Simple_SmallOffice.idf +++ b/testfiles/AirflowNetwork_Simple_SmallOffice.idf @@ -2929,6 +2929,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2936,6 +2937,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2943,6 +2945,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/AirflowWindowsAndBetweenGlassBlinds.idf b/testfiles/AirflowWindowsAndBetweenGlassBlinds.idf index ba3fbe11c09..53620ecae70 100644 --- a/testfiles/AirflowWindowsAndBetweenGlassBlinds.idf +++ b/testfiles/AirflowWindowsAndBetweenGlassBlinds.idf @@ -1202,6 +1202,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1211,6 +1212,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1220,6 +1222,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AirflowWindowsAndBetweenGlassShades.idf b/testfiles/AirflowWindowsAndBetweenGlassShades.idf index 86a90af5b78..409631b5fb5 100644 --- a/testfiles/AirflowWindowsAndBetweenGlassShades.idf +++ b/testfiles/AirflowWindowsAndBetweenGlassShades.idf @@ -1216,6 +1216,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1225,6 +1226,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1234,6 +1236,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/AtticRoof_RadiantBarriers.idf b/testfiles/AtticRoof_RadiantBarriers.idf index b1e13918b28..27752987b4d 100644 --- a/testfiles/AtticRoof_RadiantBarriers.idf +++ b/testfiles/AtticRoof_RadiantBarriers.idf @@ -2154,6 +2154,7 @@ living space Thermostat, !- Name living space, !- Zone or ZoneList Name living space Thermostat Schedule, !- Control Type Schedule Name + 0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type living space temperature setpoint, !- Control 1 Name , !- Control 2 Object Type @@ -2161,8 +2162,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name Schedule:Compact, living space Thermostat Schedule, !- Name diff --git a/testfiles/BaseBoardElectric.idf b/testfiles/BaseBoardElectric.idf index 6da3bc958df..39098f7beba 100644 --- a/testfiles/BaseBoardElectric.idf +++ b/testfiles/BaseBoardElectric.idf @@ -1183,6 +1183,7 @@ Zone 1 Thermostat, !- Name SOUTHWEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1192,6 +1193,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1201,6 +1203,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/BasicsFiles/Exercise1A.idf b/testfiles/BasicsFiles/Exercise1A.idf index ef1953d4386..b420d967bb9 100644 --- a/testfiles/BasicsFiles/Exercise1A.idf +++ b/testfiles/BasicsFiles/Exercise1A.idf @@ -444,6 +444,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name diff --git a/testfiles/BasicsFiles/Exercise1B-Solution.idf b/testfiles/BasicsFiles/Exercise1B-Solution.idf index e7c4e75346b..fc5ba13f84d 100644 --- a/testfiles/BasicsFiles/Exercise1B-Solution.idf +++ b/testfiles/BasicsFiles/Exercise1B-Solution.idf @@ -464,6 +464,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name diff --git a/testfiles/BasicsFiles/Exercise1C-Solution.idf b/testfiles/BasicsFiles/Exercise1C-Solution.idf index c7d2cac6ac7..b88a5d512f0 100644 --- a/testfiles/BasicsFiles/Exercise1C-Solution.idf +++ b/testfiles/BasicsFiles/Exercise1C-Solution.idf @@ -510,6 +510,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name diff --git a/testfiles/BasicsFiles/Exercise1D-Solution.idf b/testfiles/BasicsFiles/Exercise1D-Solution.idf index fad045a4af3..c624398b792 100644 --- a/testfiles/BasicsFiles/Exercise1D-Solution.idf +++ b/testfiles/BasicsFiles/Exercise1D-Solution.idf @@ -534,6 +534,7 @@ ZONE ONE Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office Thermostat Dual SP Control; !- Control 1 Name diff --git a/testfiles/CVRhMinHum.idf b/testfiles/CVRhMinHum.idf index a4eb26927a9..5ed6a04a14b 100644 --- a/testfiles/CVRhMinHum.idf +++ b/testfiles/CVRhMinHum.idf @@ -2027,6 +2027,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2036,6 +2037,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2050,6 +2052,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CarrollMRT-RefBldgLargeOfficeNew2004_Chicago.idf b/testfiles/CarrollMRT-RefBldgLargeOfficeNew2004_Chicago.idf index b5a2c54a594..93d907fc381 100644 --- a/testfiles/CarrollMRT-RefBldgLargeOfficeNew2004_Chicago.idf +++ b/testfiles/CarrollMRT-RefBldgLargeOfficeNew2004_Chicago.idf @@ -6201,6 +6201,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6208,6 +6209,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6215,6 +6217,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6222,6 +6225,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6229,6 +6233,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6236,6 +6241,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6243,6 +6249,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6250,6 +6257,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6257,6 +6265,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6264,6 +6273,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6271,6 +6281,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6278,6 +6289,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6285,6 +6297,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6292,6 +6305,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6299,6 +6313,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6306,6 +6321,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CentralChillerHeaterSystem_Cooling_Heating.idf b/testfiles/CentralChillerHeaterSystem_Cooling_Heating.idf index 23fe2a6e272..8cf158a951c 100644 --- a/testfiles/CentralChillerHeaterSystem_Cooling_Heating.idf +++ b/testfiles/CentralChillerHeaterSystem_Cooling_Heating.idf @@ -1980,6 +1980,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1989,6 +1990,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1998,6 +2000,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2007,6 +2010,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2016,6 +2020,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CentralChillerHeaterSystem_Simultaneous_Cooling_Heating.idf b/testfiles/CentralChillerHeaterSystem_Simultaneous_Cooling_Heating.idf index 94eb13adedd..b7a5390065e 100644 --- a/testfiles/CentralChillerHeaterSystem_Simultaneous_Cooling_Heating.idf +++ b/testfiles/CentralChillerHeaterSystem_Simultaneous_Cooling_Heating.idf @@ -1959,6 +1959,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint; !- Control 1 Name @@ -1966,6 +1967,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint; !- Control 1 Name @@ -1973,6 +1975,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint; !- Control 1 Name @@ -1980,6 +1983,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint; !- Control 1 Name @@ -1987,6 +1991,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint; !- Control 1 Name diff --git a/testfiles/ChangeoverBypassVAV.idf b/testfiles/ChangeoverBypassVAV.idf index 363616947c6..68a78ead757 100644 --- a/testfiles/ChangeoverBypassVAV.idf +++ b/testfiles/ChangeoverBypassVAV.idf @@ -1275,6 +1275,7 @@ Zone 1 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1282,6 +1283,7 @@ Zone 2 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1289,6 +1291,7 @@ Zone 3 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ChangeoverBypassVAV_AirToAir.idf b/testfiles/ChangeoverBypassVAV_AirToAir.idf index 469dd2a8307..890d79d8f9e 100644 --- a/testfiles/ChangeoverBypassVAV_AirToAir.idf +++ b/testfiles/ChangeoverBypassVAV_AirToAir.idf @@ -1281,6 +1281,7 @@ Zone 1 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1288,6 +1289,7 @@ Zone 2 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1295,6 +1297,7 @@ Zone 3 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ChangeoverBypassVAV_AirToAirHeatPump.idf b/testfiles/ChangeoverBypassVAV_AirToAirHeatPump.idf index f21f7dc4325..8b3d8256e13 100644 --- a/testfiles/ChangeoverBypassVAV_AirToAirHeatPump.idf +++ b/testfiles/ChangeoverBypassVAV_AirToAirHeatPump.idf @@ -1281,6 +1281,7 @@ Zone 1 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1288,6 +1289,7 @@ Zone 2 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1295,6 +1297,7 @@ Zone 3 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ChangeoverBypassVAV_MaxTemp.idf b/testfiles/ChangeoverBypassVAV_MaxTemp.idf index d69489221b7..a581da206ad 100644 --- a/testfiles/ChangeoverBypassVAV_MaxTemp.idf +++ b/testfiles/ChangeoverBypassVAV_MaxTemp.idf @@ -1283,6 +1283,7 @@ Zone 1 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1290,6 +1291,7 @@ Zone 2 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name @@ -1297,6 +1299,7 @@ Zone 3 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ChillerPartLoadCurve_RefBldgLargeOfficeNew2004_Chicago.idf b/testfiles/ChillerPartLoadCurve_RefBldgLargeOfficeNew2004_Chicago.idf index 51232ab6f24..e4c843a00e8 100644 --- a/testfiles/ChillerPartLoadCurve_RefBldgLargeOfficeNew2004_Chicago.idf +++ b/testfiles/ChillerPartLoadCurve_RefBldgLargeOfficeNew2004_Chicago.idf @@ -6197,6 +6197,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6204,6 +6205,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6211,6 +6213,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6218,6 +6221,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6225,6 +6229,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6232,6 +6237,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6239,6 +6245,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6246,6 +6253,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6253,6 +6261,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6260,6 +6269,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6267,6 +6277,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6274,6 +6285,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6281,6 +6293,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6288,6 +6301,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6295,6 +6309,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6302,6 +6317,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CmplxGlz_Daylighting_SouthVB45deg.idf b/testfiles/CmplxGlz_Daylighting_SouthVB45deg.idf index e919fb4a1cc..12555554218 100644 --- a/testfiles/CmplxGlz_Daylighting_SouthVB45deg.idf +++ b/testfiles/CmplxGlz_Daylighting_SouthVB45deg.idf @@ -86112,6 +86112,7 @@ COMFENZone Thermostat, !- Name COMFENZone, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type COMFENZone DualSPSched; !- Control 1 Name diff --git a/testfiles/CmplxGlz_Daylighting_SouthVerticalVB45deg.idf b/testfiles/CmplxGlz_Daylighting_SouthVerticalVB45deg.idf index 3d7ceece130..bbbb17b763f 100644 --- a/testfiles/CmplxGlz_Daylighting_SouthVerticalVB45deg.idf +++ b/testfiles/CmplxGlz_Daylighting_SouthVerticalVB45deg.idf @@ -86112,6 +86112,7 @@ COMFENZone Thermostat, !- Name COMFENZone, !- Zone or ZoneList Name Zone-Control-Type-Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type COMFENZone DualSPSched; !- Control 1 Name diff --git a/testfiles/CmplxGlz_SchedSurfGains.idf b/testfiles/CmplxGlz_SchedSurfGains.idf index d490f37f80e..43a97abf76b 100644 --- a/testfiles/CmplxGlz_SchedSurfGains.idf +++ b/testfiles/CmplxGlz_SchedSurfGains.idf @@ -381,6 +381,7 @@ Main Termostat, !- Name Room 102, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualThermostat; !- Control 1 Name diff --git a/testfiles/CmplxGlz_SmOff_IntExtShading.idf b/testfiles/CmplxGlz_SmOff_IntExtShading.idf index 203d4cc180e..3fb8fdfb6bd 100644 --- a/testfiles/CmplxGlz_SmOff_IntExtShading.idf +++ b/testfiles/CmplxGlz_SmOff_IntExtShading.idf @@ -2076,6 +2076,7 @@ South zone1, !- Name ZSF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2083,6 +2084,7 @@ North zone1, !- Name ZNF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2090,6 +2092,7 @@ South zone2, !- Name ZSF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2097,6 +2100,7 @@ North zone2, !- Name ZNF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/CoilWaterDesuperheating.idf b/testfiles/CoilWaterDesuperheating.idf index 003a221200c..5e317c88b0a 100644 --- a/testfiles/CoilWaterDesuperheating.idf +++ b/testfiles/CoilWaterDesuperheating.idf @@ -1359,6 +1359,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoilWaterDesuperheatingUnitary.idf b/testfiles/CoilWaterDesuperheatingUnitary.idf index 2a1fd02e233..613e0298d8c 100644 --- a/testfiles/CoilWaterDesuperheatingUnitary.idf +++ b/testfiles/CoilWaterDesuperheatingUnitary.idf @@ -1381,6 +1381,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoilWaterDesuperheatingUnitaryCoilDX.idf b/testfiles/CoilWaterDesuperheatingUnitaryCoilDX.idf index c35b563ce97..2ebda94ce8d 100644 --- a/testfiles/CoilWaterDesuperheatingUnitaryCoilDX.idf +++ b/testfiles/CoilWaterDesuperheatingUnitaryCoilDX.idf @@ -1381,6 +1381,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CommonPipe_Pri-Sec.idf b/testfiles/CommonPipe_Pri-Sec.idf index 8e6d147a594..271db339260 100644 --- a/testfiles/CommonPipe_Pri-Sec.idf +++ b/testfiles/CommonPipe_Pri-Sec.idf @@ -2237,6 +2237,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2248,6 +2249,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2259,6 +2261,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2270,6 +2273,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2281,6 +2285,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CompSetPtControl.idf b/testfiles/CompSetPtControl.idf index ab57ae08883..a9bad03efc3 100644 --- a/testfiles/CompSetPtControl.idf +++ b/testfiles/CompSetPtControl.idf @@ -1205,6 +1205,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1214,6 +1215,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1223,6 +1225,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CondFD1ZonePurchAirAutoSizeWithPCM.idf b/testfiles/CondFD1ZonePurchAirAutoSizeWithPCM.idf index b9f50ddad9d..154073a86c7 100644 --- a/testfiles/CondFD1ZonePurchAirAutoSizeWithPCM.idf +++ b/testfiles/CondFD1ZonePurchAirAutoSizeWithPCM.idf @@ -754,6 +754,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Convection.idf b/testfiles/Convection.idf index 718afeb371b..678f3a0429f 100644 --- a/testfiles/Convection.idf +++ b/testfiles/Convection.idf @@ -1875,6 +1875,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1884,6 +1885,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1893,6 +1895,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ConvectionAdaptiveSmallOffice.idf b/testfiles/ConvectionAdaptiveSmallOffice.idf index c897870e54a..bcdc0dd2186 100644 --- a/testfiles/ConvectionAdaptiveSmallOffice.idf +++ b/testfiles/ConvectionAdaptiveSmallOffice.idf @@ -2837,6 +2837,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2844,6 +2845,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2851,6 +2853,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2858,6 +2861,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2865,6 +2869,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CoolingCoilFreezingPrevention.idf b/testfiles/CoolingCoilFreezingPrevention.idf index 365e96373ce..4b0d3b05d67 100644 --- a/testfiles/CoolingCoilFreezingPrevention.idf +++ b/testfiles/CoolingCoilFreezingPrevention.idf @@ -1631,6 +1631,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1640,6 +1641,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1649,6 +1651,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTower.idf b/testfiles/CoolingTower.idf index d7bc1743ff2..49b89f87b8e 100644 --- a/testfiles/CoolingTower.idf +++ b/testfiles/CoolingTower.idf @@ -2014,6 +2014,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2023,6 +2024,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2032,6 +2034,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerDryBulbRangeOp.idf b/testfiles/CoolingTowerDryBulbRangeOp.idf index 5c2a53fb4fd..e1315eff92a 100644 --- a/testfiles/CoolingTowerDryBulbRangeOp.idf +++ b/testfiles/CoolingTowerDryBulbRangeOp.idf @@ -2251,6 +2251,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2263,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2275,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2287,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2299,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerNomCap.idf b/testfiles/CoolingTowerNomCap.idf index f78a77c5505..57ab9499e20 100644 --- a/testfiles/CoolingTowerNomCap.idf +++ b/testfiles/CoolingTowerNomCap.idf @@ -2002,6 +2002,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2011,6 +2012,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2020,6 +2022,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerRHRangeOp.idf b/testfiles/CoolingTowerRHRangeOp.idf index 4ad8c48db9b..eecad2594f9 100644 --- a/testfiles/CoolingTowerRHRangeOp.idf +++ b/testfiles/CoolingTowerRHRangeOp.idf @@ -2251,6 +2251,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2263,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2275,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2287,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2299,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerWetBulbRangeOp.idf b/testfiles/CoolingTowerWetBulbRangeOp.idf index 7257a399b8c..9b17758e369 100644 --- a/testfiles/CoolingTowerWetBulbRangeOp.idf +++ b/testfiles/CoolingTowerWetBulbRangeOp.idf @@ -2251,6 +2251,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2263,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2275,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2287,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2299,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerWithDBDeltaTempOp.idf b/testfiles/CoolingTowerWithDBDeltaTempOp.idf index 3a78b78ac31..22dceeb3fc5 100644 --- a/testfiles/CoolingTowerWithDBDeltaTempOp.idf +++ b/testfiles/CoolingTowerWithDBDeltaTempOp.idf @@ -2251,6 +2251,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2263,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2275,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2287,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2299,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTowerWithWBDeltaTempOp.idf b/testfiles/CoolingTowerWithWBDeltaTempOp.idf index c940a23732b..bf0748434ea 100644 --- a/testfiles/CoolingTowerWithWBDeltaTempOp.idf +++ b/testfiles/CoolingTowerWithWBDeltaTempOp.idf @@ -2325,6 +2325,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2334,6 +2335,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2343,6 +2345,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_FluidBypass.idf b/testfiles/CoolingTower_FluidBypass.idf index 92387a622e6..55474bc62e2 100644 --- a/testfiles/CoolingTower_FluidBypass.idf +++ b/testfiles/CoolingTower_FluidBypass.idf @@ -1573,6 +1573,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1914,6 +1915,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2310,6 +2312,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2735,6 +2738,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3175,6 +3179,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3560,6 +3565,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3945,6 +3951,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4330,6 +4337,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4715,6 +4723,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5100,6 +5109,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5485,6 +5495,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5870,6 +5881,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6255,6 +6267,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6640,6 +6653,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7025,6 +7039,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7410,6 +7425,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CoolingTower_MerkelVariableSpeed.idf b/testfiles/CoolingTower_MerkelVariableSpeed.idf index 435f13ed6cb..24c1245a4ed 100644 --- a/testfiles/CoolingTower_MerkelVariableSpeed.idf +++ b/testfiles/CoolingTower_MerkelVariableSpeed.idf @@ -6181,6 +6181,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6188,6 +6189,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6195,6 +6197,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6202,6 +6205,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6209,6 +6213,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6216,6 +6221,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6223,6 +6229,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6230,6 +6237,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6237,6 +6245,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6244,6 +6253,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6251,6 +6261,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6258,6 +6269,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6265,6 +6277,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6272,6 +6285,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6279,6 +6293,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6286,6 +6301,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CoolingTower_SingleSpeed_MultiCell.idf b/testfiles/CoolingTower_SingleSpeed_MultiCell.idf index 0330c53d0ef..a866ac389e8 100644 --- a/testfiles/CoolingTower_SingleSpeed_MultiCell.idf +++ b/testfiles/CoolingTower_SingleSpeed_MultiCell.idf @@ -1573,6 +1573,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1914,6 +1915,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2310,6 +2312,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2735,6 +2738,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3175,6 +3179,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3560,6 +3565,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3945,6 +3951,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4330,6 +4337,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4715,6 +4723,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5100,6 +5109,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5485,6 +5495,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5870,6 +5881,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6255,6 +6267,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6640,6 +6653,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7025,6 +7039,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7410,6 +7425,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CoolingTower_TwoSpeed.idf b/testfiles/CoolingTower_TwoSpeed.idf index 8355b58ba58..5a619ee7fd6 100644 --- a/testfiles/CoolingTower_TwoSpeed.idf +++ b/testfiles/CoolingTower_TwoSpeed.idf @@ -2030,6 +2030,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2039,6 +2040,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2048,6 +2050,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_TwoSpeed_CondEntTempReset.idf b/testfiles/CoolingTower_TwoSpeed_CondEntTempReset.idf index 9564c378c82..60bed439653 100644 --- a/testfiles/CoolingTower_TwoSpeed_CondEntTempReset.idf +++ b/testfiles/CoolingTower_TwoSpeed_CondEntTempReset.idf @@ -2059,6 +2059,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2068,6 +2069,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2077,6 +2079,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_TwoSpeed_MultiCell.idf b/testfiles/CoolingTower_TwoSpeed_MultiCell.idf index e8ddba3ab0e..7adf533638b 100644 --- a/testfiles/CoolingTower_TwoSpeed_MultiCell.idf +++ b/testfiles/CoolingTower_TwoSpeed_MultiCell.idf @@ -1573,6 +1573,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1914,6 +1915,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2310,6 +2312,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2735,6 +2738,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3175,6 +3179,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3560,6 +3565,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3945,6 +3951,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4330,6 +4337,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4715,6 +4723,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5100,6 +5109,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5485,6 +5495,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5870,6 +5881,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6255,6 +6267,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6640,6 +6653,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7025,6 +7039,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7410,6 +7425,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CoolingTower_VariableSpeed.idf b/testfiles/CoolingTower_VariableSpeed.idf index 32835ebbed1..b7fac83cd2c 100644 --- a/testfiles/CoolingTower_VariableSpeed.idf +++ b/testfiles/CoolingTower_VariableSpeed.idf @@ -2314,6 +2314,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2325,6 +2326,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2336,6 +2338,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2347,6 +2350,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2358,6 +2362,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_VariableSpeed_CondEntTempReset.idf b/testfiles/CoolingTower_VariableSpeed_CondEntTempReset.idf index 127eae8c9ba..443541c5701 100644 --- a/testfiles/CoolingTower_VariableSpeed_CondEntTempReset.idf +++ b/testfiles/CoolingTower_VariableSpeed_CondEntTempReset.idf @@ -2316,6 +2316,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2327,6 +2328,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2338,6 +2340,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2349,6 +2352,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2360,6 +2364,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_VariableSpeed_CondEntTempReset_MultipleTowers.idf b/testfiles/CoolingTower_VariableSpeed_CondEntTempReset_MultipleTowers.idf index e3ad60cc931..6a0fceb0985 100644 --- a/testfiles/CoolingTower_VariableSpeed_CondEntTempReset_MultipleTowers.idf +++ b/testfiles/CoolingTower_VariableSpeed_CondEntTempReset_MultipleTowers.idf @@ -2316,6 +2316,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2327,6 +2328,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2338,6 +2340,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2349,6 +2352,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2360,6 +2364,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint.idf b/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint.idf index da578fc2de7..0b8733adec6 100644 --- a/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint.idf +++ b/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint.idf @@ -2321,6 +2321,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2332,6 +2333,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2343,6 +2345,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2354,6 +2357,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2365,6 +2369,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint_MultipleTowers.idf b/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint_MultipleTowers.idf index f3a7e79555d..f4e03169c0f 100644 --- a/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint_MultipleTowers.idf +++ b/testfiles/CoolingTower_VariableSpeed_IdealCondEntTempSetpoint_MultipleTowers.idf @@ -2301,6 +2301,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2312,6 +2313,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2323,6 +2325,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2334,6 +2337,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2345,6 +2349,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/CoolingTower_VariableSpeed_MultiCell.idf b/testfiles/CoolingTower_VariableSpeed_MultiCell.idf index 93b7f45cdb3..ef243e573c8 100644 --- a/testfiles/CoolingTower_VariableSpeed_MultiCell.idf +++ b/testfiles/CoolingTower_VariableSpeed_MultiCell.idf @@ -1572,6 +1572,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1913,6 +1914,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2309,6 +2311,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2734,6 +2737,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3174,6 +3178,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3559,6 +3564,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3944,6 +3950,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4329,6 +4336,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4714,6 +4722,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5099,6 +5108,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5484,6 +5494,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5869,6 +5880,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6254,6 +6266,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6639,6 +6652,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7024,6 +7038,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7409,6 +7424,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/CustomSolarVisibleSpectrum_RefBldgSmallOfficeNew2004_Chicago.idf b/testfiles/CustomSolarVisibleSpectrum_RefBldgSmallOfficeNew2004_Chicago.idf index 87c5a579eec..243febd0277 100644 --- a/testfiles/CustomSolarVisibleSpectrum_RefBldgSmallOfficeNew2004_Chicago.idf +++ b/testfiles/CustomSolarVisibleSpectrum_RefBldgSmallOfficeNew2004_Chicago.idf @@ -2814,6 +2814,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2821,6 +2822,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2828,6 +2830,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2835,6 +2838,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2842,6 +2846,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/DDAutoSize.idf b/testfiles/DDAutoSize.idf index 6091c259b39..86c19fa88bf 100644 --- a/testfiles/DDAutoSize.idf +++ b/testfiles/DDAutoSize.idf @@ -2119,6 +2119,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2126,6 +2127,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2133,6 +2135,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/DElight-Detailed-Comparison.idf b/testfiles/DElight-Detailed-Comparison.idf index 19ed219f7ed..b76670cfd10 100644 --- a/testfiles/DElight-Detailed-Comparison.idf +++ b/testfiles/DElight-Detailed-Comparison.idf @@ -806,6 +806,7 @@ DElight Zone Thermostat, !- Name 3i2eFc1ofBz80jvIMxrXvL, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -815,6 +816,7 @@ Detailed Zone Thermostat,!- Name 1fNY1vx3jAvesY6geZTgIV, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DElightCFSLightShelf.idf b/testfiles/DElightCFSLightShelf.idf index 54d6e2b10f4..4c3818eeb30 100644 --- a/testfiles/DElightCFSLightShelf.idf +++ b/testfiles/DElightCFSLightShelf.idf @@ -814,6 +814,7 @@ DElight Zone Thermostat, !- Name 3i2eFc1ofBz80jvIMxrXvL, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -823,6 +824,7 @@ Detailed Zone Thermostat,!- Name 1fNY1vx3jAvesY6geZTgIV, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DElightCFSWindow.idf b/testfiles/DElightCFSWindow.idf index 408b9d16033..47d9f8ed015 100644 --- a/testfiles/DElightCFSWindow.idf +++ b/testfiles/DElightCFSWindow.idf @@ -814,6 +814,7 @@ DElight Zone Thermostat, !- Name 3i2eFc1ofBz80jvIMxrXvL, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -823,6 +824,7 @@ Detailed Zone Thermostat,!- Name 1fNY1vx3jAvesY6geZTgIV, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DOASDXCOIL_wADPBFMethod.idf b/testfiles/DOASDXCOIL_wADPBFMethod.idf index 4872fb0bedc..7cfbfde9d8c 100644 --- a/testfiles/DOASDXCOIL_wADPBFMethod.idf +++ b/testfiles/DOASDXCOIL_wADPBFMethod.idf @@ -1789,6 +1789,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1895,6 +1896,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2001,6 +2003,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2107,6 +2110,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2213,6 +2217,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOASDXCOIL_wADPBFMethod_NoReturnPath.idf b/testfiles/DOASDXCOIL_wADPBFMethod_NoReturnPath.idf index bde9ec33693..f8685335c04 100644 --- a/testfiles/DOASDXCOIL_wADPBFMethod_NoReturnPath.idf +++ b/testfiles/DOASDXCOIL_wADPBFMethod_NoReturnPath.idf @@ -1791,6 +1791,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1897,6 +1898,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2003,6 +2005,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2109,6 +2112,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2215,6 +2219,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOASDualDuctSchool.idf b/testfiles/DOASDualDuctSchool.idf index 94c59f88621..290e6141fd8 100644 --- a/testfiles/DOASDualDuctSchool.idf +++ b/testfiles/DOASDualDuctSchool.idf @@ -1605,6 +1605,7 @@ Corner_Class_1_Pod_1 Thermostat, !- Name Corner_Class_1_Pod_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1 DualSPSched; !- Control 1 Name @@ -2489,6 +2490,7 @@ Mult_Class_1_Pod_1 Thermostat, !- Name Mult_Class_1_Pod_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1 DualSPSched; !- Control 1 Name @@ -2887,6 +2889,7 @@ Corridor_Pod_1 Thermostat, !- Name Corridor_Pod_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1 DualSPSched; !- Control 1 Name @@ -3391,6 +3394,7 @@ Corner_Class_2_Pod_1 Thermostat, !- Name Corner_Class_2_Pod_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1 DualSPSched; !- Control 1 Name @@ -4075,6 +4079,7 @@ Mult_Class_2_Pod_1 Thermostat, !- Name Mult_Class_2_Pod_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1 DualSPSched; !- Control 1 Name @@ -4640,6 +4645,7 @@ Main_Corridor Thermostat,!- Name Main_Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor DualSPSched; !- Control 1 Name @@ -5132,6 +5138,7 @@ Lobby Thermostat, !- Name Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby DualSPSched; !- Control 1 Name @@ -5589,6 +5596,7 @@ Mech Thermostat, !- Name Mech, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech DualSPSched; !- Control 1 Name @@ -6001,6 +6009,7 @@ Bathrooms Thermostat, !- Name Bathrooms, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms DualSPSched; !- Control 1 Name @@ -6883,6 +6892,7 @@ Offices Thermostat, !- Name Offices, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices DualSPSched; !- Control 1 Name @@ -7554,6 +7564,7 @@ Media_Center Thermostat, !- Name Media_Center, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Media_Center DualSPSched;!- Control 1 Name diff --git a/testfiles/DOAS_wNeutralSupplyAir_wFanCoilUnits.idf b/testfiles/DOAS_wNeutralSupplyAir_wFanCoilUnits.idf index b445c54bfd6..61e607f1ef0 100644 --- a/testfiles/DOAS_wNeutralSupplyAir_wFanCoilUnits.idf +++ b/testfiles/DOAS_wNeutralSupplyAir_wFanCoilUnits.idf @@ -2365,6 +2365,7 @@ SPACE1-1 Thermal Zone Thermostat, !- Name SPACE1-1 Thermal Zone, !- Zone or ZoneList Name SPACE1-1 Thermal Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type {6b5ec96d-bccd-45b7-8936-6ef68acc6b2f}; !- Control 1 Name @@ -2372,6 +2373,7 @@ SPACE2-1 Thermal Zone Thermostat, !- Name SPACE2-1 Thermal Zone, !- Zone or ZoneList Name SPACE2-1 Thermal Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type {d799f115-af73-4624-998c-9e81dbbb2327}; !- Control 1 Name @@ -2379,6 +2381,7 @@ SPACE3-1 Thermal Zone Thermostat, !- Name SPACE3-1 Thermal Zone, !- Zone or ZoneList Name SPACE3-1 Thermal Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type {bea2f2b9-2b98-445e-ba0d-cc8c90f00bc1}; !- Control 1 Name @@ -2386,6 +2389,7 @@ SPACE4-1 Thermal Zone Thermostat, !- Name SPACE4-1 Thermal Zone, !- Zone or ZoneList Name SPACE4-1 Thermal Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type {ef646519-79bc-4440-b55a-26d91f0715a9}; !- Control 1 Name @@ -2393,6 +2397,7 @@ SPACE5-1 Thermal Zone Thermostat, !- Name SPACE5-1 Thermal Zone, !- Zone or ZoneList Name SPACE5-1 Thermal Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type {dca11545-a240-4366-b6d7-503339d1cdfa}; !- Control 1 Name diff --git a/testfiles/DOAToFanCoilInlet.idf b/testfiles/DOAToFanCoilInlet.idf index eec8c03fd34..6550c7c349e 100644 --- a/testfiles/DOAToFanCoilInlet.idf +++ b/testfiles/DOAToFanCoilInlet.idf @@ -2174,6 +2174,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2181,6 +2182,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2188,6 +2190,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2195,6 +2198,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2202,6 +2206,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToFanCoilSupply.idf b/testfiles/DOAToFanCoilSupply.idf index f7cb4c87617..15a280d9987 100644 --- a/testfiles/DOAToFanCoilSupply.idf +++ b/testfiles/DOAToFanCoilSupply.idf @@ -2174,6 +2174,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2181,6 +2182,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2188,6 +2190,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2195,6 +2198,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2202,6 +2206,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToPTAC.idf b/testfiles/DOAToPTAC.idf index e2597ded227..fcb2cd72987 100644 --- a/testfiles/DOAToPTAC.idf +++ b/testfiles/DOAToPTAC.idf @@ -2173,6 +2173,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2180,6 +2181,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2187,6 +2189,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2194,6 +2197,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2201,6 +2205,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToPTAC_DrawReturnAir.idf b/testfiles/DOAToPTAC_DrawReturnAir.idf index 59862681b4d..cecffd8f5b5 100644 --- a/testfiles/DOAToPTAC_DrawReturnAir.idf +++ b/testfiles/DOAToPTAC_DrawReturnAir.idf @@ -2121,6 +2121,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2128,6 +2129,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2135,6 +2137,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2142,6 +2145,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2149,6 +2153,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToPTHP.idf b/testfiles/DOAToPTHP.idf index c7fa22867d4..2e15e741bc1 100644 --- a/testfiles/DOAToPTHP.idf +++ b/testfiles/DOAToPTHP.idf @@ -2183,6 +2183,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2190,6 +2191,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2197,6 +2199,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2204,6 +2207,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2211,6 +2215,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToUnitVentilator.idf b/testfiles/DOAToUnitVentilator.idf index a11e60138f5..e45a65ef65c 100644 --- a/testfiles/DOAToUnitVentilator.idf +++ b/testfiles/DOAToUnitVentilator.idf @@ -2767,6 +2767,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Zone Dual SP Control; !- Control 1 Name @@ -2779,6 +2780,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2788,6 +2790,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2797,6 +2800,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Zone Dual SP Control; !- Control 1 Name @@ -2804,6 +2808,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DOAToUnitarySystem.idf b/testfiles/DOAToUnitarySystem.idf index 4234d6a8ebd..352b203ecca 100644 --- a/testfiles/DOAToUnitarySystem.idf +++ b/testfiles/DOAToUnitarySystem.idf @@ -2255,6 +2255,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2262,6 +2263,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2269,6 +2271,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2276,6 +2279,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2283,6 +2287,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToVRF.idf b/testfiles/DOAToVRF.idf index ed3d760ae52..72b8f79e4b0 100644 --- a/testfiles/DOAToVRF.idf +++ b/testfiles/DOAToVRF.idf @@ -3156,6 +3156,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3163,6 +3164,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3170,6 +3172,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3177,6 +3180,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3184,6 +3188,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/DOAToWaterToAirHPInlet.idf b/testfiles/DOAToWaterToAirHPInlet.idf index efd57319c06..6fadeba61d3 100644 --- a/testfiles/DOAToWaterToAirHPInlet.idf +++ b/testfiles/DOAToWaterToAirHPInlet.idf @@ -2161,6 +2161,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2168,6 +2169,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2175,6 +2177,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2182,6 +2185,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2189,6 +2193,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToWaterToAirHPInlet_MultispeedFan.idf b/testfiles/DOAToWaterToAirHPInlet_MultispeedFan.idf index 7f74f78d704..8278efc3c7c 100644 --- a/testfiles/DOAToWaterToAirHPInlet_MultispeedFan.idf +++ b/testfiles/DOAToWaterToAirHPInlet_MultispeedFan.idf @@ -2163,6 +2163,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2170,6 +2171,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2177,6 +2179,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2184,6 +2187,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2191,6 +2195,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DOAToWaterToAirHPSupply.idf b/testfiles/DOAToWaterToAirHPSupply.idf index 54f9767672e..b02513c484d 100644 --- a/testfiles/DOAToWaterToAirHPSupply.idf +++ b/testfiles/DOAToWaterToAirHPSupply.idf @@ -2161,6 +2161,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2168,6 +2169,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2175,6 +2177,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2182,6 +2185,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2189,6 +2193,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/DXCoilSystemAuto.idf b/testfiles/DXCoilSystemAuto.idf index 5022a97ed3e..8a2e624db51 100644 --- a/testfiles/DXCoilSystemAuto.idf +++ b/testfiles/DXCoilSystemAuto.idf @@ -1632,6 +1632,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1641,6 +1642,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type East Zone DualSPSched; !- Control 1 Name @@ -1660,6 +1662,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DaylightingDeviceTubular.idf b/testfiles/DaylightingDeviceTubular.idf index 75ce2bb4b66..d3b6adc263b 100644 --- a/testfiles/DaylightingDeviceTubular.idf +++ b/testfiles/DaylightingDeviceTubular.idf @@ -1020,6 +1020,7 @@ Daylit Zone Thermostat, !- Name Daylit Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -1078,6 +1079,7 @@ Standard Zone Thermostat,!- Name Standard Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name diff --git a/testfiles/DesiccantCVRh.idf b/testfiles/DesiccantCVRh.idf index 88b5c76fade..bb364753d6c 100644 --- a/testfiles/DesiccantCVRh.idf +++ b/testfiles/DesiccantCVRh.idf @@ -2043,6 +2043,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2052,6 +2053,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2061,6 +2063,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DesiccantCVRhZoneRHCtrl.idf b/testfiles/DesiccantCVRhZoneRHCtrl.idf index a9379090e9f..8ac8c3847fc 100644 --- a/testfiles/DesiccantCVRhZoneRHCtrl.idf +++ b/testfiles/DesiccantCVRhZoneRHCtrl.idf @@ -2099,6 +2099,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2108,6 +2109,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2117,6 +2119,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DesiccantCVRhZoneRHCtrl_AddedAutosize.idf b/testfiles/DesiccantCVRhZoneRHCtrl_AddedAutosize.idf index 69bfed87f47..a2ce7205d0c 100644 --- a/testfiles/DesiccantCVRhZoneRHCtrl_AddedAutosize.idf +++ b/testfiles/DesiccantCVRhZoneRHCtrl_AddedAutosize.idf @@ -2099,6 +2099,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2108,6 +2109,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2117,6 +2119,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/DesiccantDehumidifierWithAirToAirCoil.idf b/testfiles/DesiccantDehumidifierWithAirToAirCoil.idf index 305e262c1a0..dda1551c988 100644 --- a/testfiles/DesiccantDehumidifierWithAirToAirCoil.idf +++ b/testfiles/DesiccantDehumidifierWithAirToAirCoil.idf @@ -2576,6 +2576,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2587,6 +2588,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2598,6 +2600,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2609,6 +2612,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2620,6 +2624,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Desiccant Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/DesiccantDehumidifierWithCompanionCoil.idf b/testfiles/DesiccantDehumidifierWithCompanionCoil.idf index 9278575ee31..000f60f00fd 100644 --- a/testfiles/DesiccantDehumidifierWithCompanionCoil.idf +++ b/testfiles/DesiccantDehumidifierWithCompanionCoil.idf @@ -2577,6 +2577,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2588,6 +2589,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2599,6 +2601,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2610,6 +2613,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2621,6 +2625,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Desiccant Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/DirectIndirectEvapCoolers.idf b/testfiles/DirectIndirectEvapCoolers.idf index b082741c2f9..1ff4656df29 100644 --- a/testfiles/DirectIndirectEvapCoolers.idf +++ b/testfiles/DirectIndirectEvapCoolers.idf @@ -2561,6 +2561,7 @@ units_gr_lf Thermostat, !- Name units_gr_lf, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type units_gr_lf DualSPSched; !- Control 1 Name @@ -3125,6 +3126,7 @@ units_gr_rt Thermostat, !- Name units_gr_rt, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type units_gr_rt DualSPSched; !- Control 1 Name @@ -3514,6 +3516,7 @@ unit_s_g Thermostat, !- Name unit_s_g, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type unit_s_g DualSPSched; !- Control 1 Name @@ -3903,6 +3906,7 @@ unit_n_g Thermostat, !- Name unit_n_g, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type unit_n_g DualSPSched; !- Control 1 Name diff --git a/testfiles/DirectIndirectEvapCoolersVSAS.idf b/testfiles/DirectIndirectEvapCoolersVSAS.idf index 4da757a903b..a32c3cf3b5f 100644 --- a/testfiles/DirectIndirectEvapCoolersVSAS.idf +++ b/testfiles/DirectIndirectEvapCoolersVSAS.idf @@ -3240,6 +3240,7 @@ units_gr_lf Thermostat, !- Name units_gr_lf, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type units_gr_lf DualSPSched; !- Control 1 Name @@ -3804,6 +3805,7 @@ units_gr_rt Thermostat, !- Name units_gr_rt, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type units_gr_rt DualSPSched; !- Control 1 Name @@ -4193,6 +4195,7 @@ unit_s_g Thermostat, !- Name unit_s_g, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type unit_s_g DualSPSched; !- Control 1 Name @@ -4582,6 +4585,7 @@ unit_n_g Thermostat, !- Name unit_n_g, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type unit_n_g DualSPSched; !- Control 1 Name diff --git a/testfiles/DisplacementVent_1ZoneOffice.idf b/testfiles/DisplacementVent_1ZoneOffice.idf index 8136e2231fd..8325d1325fb 100644 --- a/testfiles/DisplacementVent_1ZoneOffice.idf +++ b/testfiles/DisplacementVent_1ZoneOffice.idf @@ -2061,6 +2061,7 @@ ZONE1 Thermostat, !- Name ZONE1, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/DisplacementVent_VAV.idf b/testfiles/DisplacementVent_VAV.idf index 7c2a654ab9b..dd9574f03f0 100644 --- a/testfiles/DisplacementVent_VAV.idf +++ b/testfiles/DisplacementVent_VAV.idf @@ -975,6 +975,7 @@ SPACE1-1 Control, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type dual; !- Control 1 Name diff --git a/testfiles/DualDuctConstVolDamper.idf b/testfiles/DualDuctConstVolDamper.idf index 4be6fc66fc4..9f29d8f950a 100644 --- a/testfiles/DualDuctConstVolDamper.idf +++ b/testfiles/DualDuctConstVolDamper.idf @@ -2010,6 +2010,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2017,6 +2018,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2024,6 +2026,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/DualDuctConstVolGasHC.idf b/testfiles/DualDuctConstVolGasHC.idf index 39a5d784e93..3ebda82399b 100644 --- a/testfiles/DualDuctConstVolGasHC.idf +++ b/testfiles/DualDuctConstVolGasHC.idf @@ -1814,6 +1814,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -1821,6 +1822,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -1828,6 +1830,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/DualDuctVarVolDamper.idf b/testfiles/DualDuctVarVolDamper.idf index d586dd739c0..dedbaec8c39 100644 --- a/testfiles/DualDuctVarVolDamper.idf +++ b/testfiles/DualDuctVarVolDamper.idf @@ -2047,6 +2047,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2054,6 +2055,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2061,6 +2063,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/DualDuctWaterCoils.idf b/testfiles/DualDuctWaterCoils.idf index af1530aa1bb..0aa29da61a2 100644 --- a/testfiles/DualDuctWaterCoils.idf +++ b/testfiles/DualDuctWaterCoils.idf @@ -1169,6 +1169,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -1176,6 +1177,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -1183,6 +1185,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/DuctLoss_House.idf b/testfiles/DuctLoss_House.idf index 717beaa1593..7925923476c 100644 --- a/testfiles/DuctLoss_House.idf +++ b/testfiles/DuctLoss_House.idf @@ -1661,6 +1661,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/DynamicClothing.idf b/testfiles/DynamicClothing.idf index 5dfdc5ae498..1a95d53f30c 100644 --- a/testfiles/DynamicClothing.idf +++ b/testfiles/DynamicClothing.idf @@ -1162,6 +1162,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1171,6 +1172,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1180,6 +1182,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EMPD5ZoneWaterCooled_HighRHControl.idf b/testfiles/EMPD5ZoneWaterCooled_HighRHControl.idf index cf4db253ee1..fd6311132b7 100644 --- a/testfiles/EMPD5ZoneWaterCooled_HighRHControl.idf +++ b/testfiles/EMPD5ZoneWaterCooled_HighRHControl.idf @@ -2301,6 +2301,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2308,6 +2309,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2320,6 +2322,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2327,6 +2330,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2334,6 +2338,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/EMSAirflowNetworkOpeningControlByHumidity.idf b/testfiles/EMSAirflowNetworkOpeningControlByHumidity.idf index 0dda512f8a2..e7da8d0ccde 100644 --- a/testfiles/EMSAirflowNetworkOpeningControlByHumidity.idf +++ b/testfiles/EMSAirflowNetworkOpeningControlByHumidity.idf @@ -3095,6 +3095,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3102,6 +3103,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3109,6 +3111,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/EMSConstantVolumePurchasedAir.idf b/testfiles/EMSConstantVolumePurchasedAir.idf index 0f0ab5f76db..9ab5d34ec20 100644 --- a/testfiles/EMSConstantVolumePurchasedAir.idf +++ b/testfiles/EMSConstantVolumePurchasedAir.idf @@ -1069,6 +1069,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1078,6 +1079,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1087,6 +1089,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EMSCurveOverride_PackagedTerminalHeatPump.idf b/testfiles/EMSCurveOverride_PackagedTerminalHeatPump.idf index 9cebc3979b4..dbeccebd075 100644 --- a/testfiles/EMSCurveOverride_PackagedTerminalHeatPump.idf +++ b/testfiles/EMSCurveOverride_PackagedTerminalHeatPump.idf @@ -1547,6 +1547,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1569,6 +1570,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1578,6 +1580,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EMSCustomOutputVariable.idf b/testfiles/EMSCustomOutputVariable.idf index 0f9c4877456..f05b8ad54f3 100644 --- a/testfiles/EMSCustomOutputVariable.idf +++ b/testfiles/EMSCustomOutputVariable.idf @@ -1506,6 +1506,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2021,6 +2022,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2436,6 +2438,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2881,6 +2884,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3296,6 +3300,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSCustomSchedule.idf b/testfiles/EMSCustomSchedule.idf index 0a96c105285..4858a3b5fc9 100644 --- a/testfiles/EMSCustomSchedule.idf +++ b/testfiles/EMSCustomSchedule.idf @@ -1590,6 +1590,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2105,6 +2106,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2520,6 +2522,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2965,6 +2968,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3380,6 +3384,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSDemandManager_LargeOffice.idf b/testfiles/EMSDemandManager_LargeOffice.idf index fe41ebffd8c..8910a417630 100644 --- a/testfiles/EMSDemandManager_LargeOffice.idf +++ b/testfiles/EMSDemandManager_LargeOffice.idf @@ -1603,6 +1603,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1944,6 +1945,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2340,6 +2342,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2765,6 +2768,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3205,6 +3209,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3590,6 +3595,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3975,6 +3981,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4360,6 +4367,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4745,6 +4753,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5130,6 +5139,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5515,6 +5525,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5900,6 +5911,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6285,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6670,6 +6683,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7055,6 +7069,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7440,6 +7455,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSDiscreteAirSystemSizes.idf b/testfiles/EMSDiscreteAirSystemSizes.idf index 732bf5bfd69..deb3bcb0696 100644 --- a/testfiles/EMSDiscreteAirSystemSizes.idf +++ b/testfiles/EMSDiscreteAirSystemSizes.idf @@ -1515,6 +1515,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -1930,6 +1931,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -2345,6 +2347,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -2760,6 +2763,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3175,6 +3179,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3650,6 +3655,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -4065,6 +4071,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -4480,6 +4487,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -4895,6 +4903,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -5310,6 +5319,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSLoadBasedMultiSpeedDXCoilOverrideControl.idf b/testfiles/EMSLoadBasedMultiSpeedDXCoilOverrideControl.idf index e06e1f6c781..5e5c62a68dd 100644 --- a/testfiles/EMSLoadBasedMultiSpeedDXCoilOverrideControl.idf +++ b/testfiles/EMSLoadBasedMultiSpeedDXCoilOverrideControl.idf @@ -1860,6 +1860,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1951,6 +1952,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2042,6 +2044,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2133,6 +2136,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2224,6 +2228,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/EMSMultiSpeedHeatPumpOverrideControl.idf b/testfiles/EMSMultiSpeedHeatPumpOverrideControl.idf index 4df9da75f6b..810c7ab2dc6 100644 --- a/testfiles/EMSMultiSpeedHeatPumpOverrideControl.idf +++ b/testfiles/EMSMultiSpeedHeatPumpOverrideControl.idf @@ -1455,6 +1455,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1462,8 +1463,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/EMSPlantLoopOverrideControl.idf b/testfiles/EMSPlantLoopOverrideControl.idf index bd0917a5caa..42e7c82a57d 100644 --- a/testfiles/EMSPlantLoopOverrideControl.idf +++ b/testfiles/EMSPlantLoopOverrideControl.idf @@ -6529,6 +6529,7 @@ ZN1_S_Space_1 Thermostat,!- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_S_Space_1 DualSPSched; !- Control 1 Name @@ -6536,6 +6537,7 @@ ZN2_E_Space_1 Thermostat,!- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_E_Space_1 DualSPSched; !- Control 1 Name @@ -6543,6 +6545,7 @@ ZN3_N_Space_1 Thermostat,!- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_N_Space_1 DualSPSched; !- Control 1 Name @@ -6550,6 +6553,7 @@ ZN4_W_Space_1 Thermostat,!- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_W_Space_1 DualSPSched; !- Control 1 Name @@ -6557,6 +6561,7 @@ ZN5_Core_Space_1 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_Core_Space_1 DualSPSched; !- Control 1 Name @@ -6564,6 +6569,7 @@ ZN6_S_Space_2 Thermostat,!- Name ZN6_S_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN6_S_Space_2 DualSPSched; !- Control 1 Name @@ -6571,6 +6577,7 @@ ZN7_E_Space_2 Thermostat,!- Name ZN7_E_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN7_E_Space_2 DualSPSched; !- Control 1 Name @@ -6578,6 +6585,7 @@ ZN8_N_Space_2 Thermostat,!- Name ZN8_N_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN8_N_Space_2 DualSPSched; !- Control 1 Name @@ -6585,6 +6593,7 @@ ZN9_W_Space_2 Thermostat,!- Name ZN9_W_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN9_W_Space_2 DualSPSched; !- Control 1 Name @@ -6592,6 +6601,7 @@ ZN10_Core_Space_2 Thermostat, !- Name ZN10_Core_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN10_Core_Space_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSPlantOperation_largeOff.idf b/testfiles/EMSPlantOperation_largeOff.idf index 725693582ff..b330738d0e8 100644 --- a/testfiles/EMSPlantOperation_largeOff.idf +++ b/testfiles/EMSPlantOperation_largeOff.idf @@ -6181,6 +6181,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6188,6 +6189,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6195,6 +6197,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6202,6 +6205,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6209,6 +6213,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6216,6 +6221,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6223,6 +6229,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6230,6 +6237,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6237,6 +6245,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6244,6 +6253,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6251,6 +6261,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6258,6 +6269,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6265,6 +6277,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6272,6 +6285,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6279,6 +6293,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6286,6 +6301,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSReplaceTraditionalManagers_LargeOffice.idf b/testfiles/EMSReplaceTraditionalManagers_LargeOffice.idf index bab88d112c9..36fab85f25e 100644 --- a/testfiles/EMSReplaceTraditionalManagers_LargeOffice.idf +++ b/testfiles/EMSReplaceTraditionalManagers_LargeOffice.idf @@ -1591,6 +1591,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1932,6 +1933,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2328,6 +2330,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2753,6 +2756,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3193,6 +3197,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3578,6 +3583,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3963,6 +3969,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4348,6 +4355,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4733,6 +4741,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5118,6 +5127,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5503,6 +5513,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5888,6 +5899,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6273,6 +6285,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6658,6 +6671,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7043,6 +7057,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7428,6 +7443,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSSetpointBasedMultiSpeedDXCoilOverrideControl.idf b/testfiles/EMSSetpointBasedMultiSpeedDXCoilOverrideControl.idf index 0f592e15d96..0a4686f4621 100644 --- a/testfiles/EMSSetpointBasedMultiSpeedDXCoilOverrideControl.idf +++ b/testfiles/EMSSetpointBasedMultiSpeedDXCoilOverrideControl.idf @@ -2316,6 +2316,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2327,6 +2328,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2338,6 +2340,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2349,6 +2352,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2360,6 +2364,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/EMSTestMathAndKill.idf b/testfiles/EMSTestMathAndKill.idf index 6fb19c86fa6..a98e01be8b7 100644 --- a/testfiles/EMSTestMathAndKill.idf +++ b/testfiles/EMSTestMathAndKill.idf @@ -1686,6 +1686,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2201,6 +2202,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2616,6 +2618,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -3061,6 +3064,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3476,6 +3480,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSThermochromicWindow.idf b/testfiles/EMSThermochromicWindow.idf index 5e9e40e9070..abc940becfa 100644 --- a/testfiles/EMSThermochromicWindow.idf +++ b/testfiles/EMSThermochromicWindow.idf @@ -1427,6 +1427,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -1937,6 +1938,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2347,6 +2349,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2787,6 +2790,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3197,6 +3201,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/EMSUserDefined5ZoneAirCooled.idf b/testfiles/EMSUserDefined5ZoneAirCooled.idf index 4b2bd378aec..8ea55bb5945 100644 --- a/testfiles/EMSUserDefined5ZoneAirCooled.idf +++ b/testfiles/EMSUserDefined5ZoneAirCooled.idf @@ -2240,6 +2240,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2251,6 +2252,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2264,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2276,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2288,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/EMSUserDefinedWindACAuto.idf b/testfiles/EMSUserDefinedWindACAuto.idf index c424e26f258..92444b54e39 100644 --- a/testfiles/EMSUserDefinedWindACAuto.idf +++ b/testfiles/EMSUserDefinedWindACAuto.idf @@ -1571,6 +1571,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1580,6 +1581,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1589,6 +1591,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EMSWindowShadeControl.idf b/testfiles/EMSWindowShadeControl.idf index fe4eb63b1a8..1ac8bd3cf57 100644 --- a/testfiles/EMSWindowShadeControl.idf +++ b/testfiles/EMSWindowShadeControl.idf @@ -1061,6 +1061,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1070,6 +1071,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1079,6 +1081,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EcoroofOrlando.idf b/testfiles/EcoroofOrlando.idf index b3844b2fa7f..5511a8a97cd 100644 --- a/testfiles/EcoroofOrlando.idf +++ b/testfiles/EcoroofOrlando.idf @@ -6526,6 +6526,7 @@ ZN1_S_Space_1 Thermostat,!- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_S_Space_1 DualSPSched; !- Control 1 Name @@ -6533,6 +6534,7 @@ ZN2_E_Space_1 Thermostat,!- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_E_Space_1 DualSPSched; !- Control 1 Name @@ -6540,6 +6542,7 @@ ZN3_N_Space_1 Thermostat,!- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_N_Space_1 DualSPSched; !- Control 1 Name @@ -6547,6 +6550,7 @@ ZN4_W_Space_1 Thermostat,!- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_W_Space_1 DualSPSched; !- Control 1 Name @@ -6554,6 +6558,7 @@ ZN5_Core_Space_1 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_Core_Space_1 DualSPSched; !- Control 1 Name @@ -6561,6 +6566,7 @@ ZN6_S_Space_2 Thermostat,!- Name ZN6_S_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN6_S_Space_2 DualSPSched; !- Control 1 Name @@ -6568,6 +6574,7 @@ ZN7_E_Space_2 Thermostat,!- Name ZN7_E_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN7_E_Space_2 DualSPSched; !- Control 1 Name @@ -6575,6 +6582,7 @@ ZN8_N_Space_2 Thermostat,!- Name ZN8_N_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN8_N_Space_2 DualSPSched; !- Control 1 Name @@ -6582,6 +6590,7 @@ ZN9_W_Space_2 Thermostat,!- Name ZN9_W_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN9_W_Space_2 DualSPSched; !- Control 1 Name @@ -6589,6 +6598,7 @@ ZN10_Core_Space_2 Thermostat, !- Name ZN10_Core_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN10_Core_Space_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/EcoroofOrlando_NoSitePrec.idf b/testfiles/EcoroofOrlando_NoSitePrec.idf index e78186eb352..d4ddfe375e9 100644 --- a/testfiles/EcoroofOrlando_NoSitePrec.idf +++ b/testfiles/EcoroofOrlando_NoSitePrec.idf @@ -5020,6 +5020,7 @@ ZN1_S_Space_1 Thermostat,!- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_S_Space_1 DualSPSched; !- Control 1 Name @@ -5027,6 +5028,7 @@ ZN2_E_Space_1 Thermostat,!- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_E_Space_1 DualSPSched; !- Control 1 Name @@ -5034,6 +5036,7 @@ ZN3_N_Space_1 Thermostat,!- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_N_Space_1 DualSPSched; !- Control 1 Name @@ -5041,6 +5044,7 @@ ZN4_W_Space_1 Thermostat,!- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_W_Space_1 DualSPSched; !- Control 1 Name @@ -5048,6 +5052,7 @@ ZN5_Core_Space_1 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_Core_Space_1 DualSPSched; !- Control 1 Name @@ -5055,6 +5060,7 @@ ZN6_S_Space_2 Thermostat,!- Name ZN6_S_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN6_S_Space_2 DualSPSched; !- Control 1 Name @@ -5062,6 +5068,7 @@ ZN7_E_Space_2 Thermostat,!- Name ZN7_E_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN7_E_Space_2 DualSPSched; !- Control 1 Name @@ -5069,6 +5076,7 @@ ZN8_N_Space_2 Thermostat,!- Name ZN8_N_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN8_N_Space_2 DualSPSched; !- Control 1 Name @@ -5076,6 +5084,7 @@ ZN9_W_Space_2 Thermostat,!- Name ZN9_W_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN9_W_Space_2 DualSPSched; !- Control 1 Name @@ -5083,6 +5092,7 @@ ZN10_Core_Space_2 Thermostat, !- Name ZN10_Core_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN10_Core_Space_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/ElectricChiller.idf b/testfiles/ElectricChiller.idf index da43780fcd7..db905d400eb 100644 --- a/testfiles/ElectricChiller.idf +++ b/testfiles/ElectricChiller.idf @@ -2549,6 +2549,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2560,6 +2561,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2571,6 +2573,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2582,6 +2585,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2593,6 +2597,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/ElectricEIRChiller.idf b/testfiles/ElectricEIRChiller.idf index 40968038a97..b51c50f5157 100644 --- a/testfiles/ElectricEIRChiller.idf +++ b/testfiles/ElectricEIRChiller.idf @@ -2082,6 +2082,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2091,6 +2092,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2100,6 +2102,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ElectricEIRChillerHeatRecoveryAuto.idf b/testfiles/ElectricEIRChillerHeatRecoveryAuto.idf index 5ff009191a5..81028a5366e 100644 --- a/testfiles/ElectricEIRChillerHeatRecoveryAuto.idf +++ b/testfiles/ElectricEIRChillerHeatRecoveryAuto.idf @@ -2390,6 +2390,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2397,6 +2398,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2404,6 +2406,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/ElectricEIRChiller_EvapCooledCondenser.idf b/testfiles/ElectricEIRChiller_EvapCooledCondenser.idf index d4b98e160fd..1a5b8c6338d 100644 --- a/testfiles/ElectricEIRChiller_EvapCooledCondenser.idf +++ b/testfiles/ElectricEIRChiller_EvapCooledCondenser.idf @@ -1170,6 +1170,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1179,6 +1180,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1188,6 +1190,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EngineChiller.idf b/testfiles/EngineChiller.idf index c330970f737..72bcec0eaa2 100644 --- a/testfiles/EngineChiller.idf +++ b/testfiles/EngineChiller.idf @@ -2018,6 +2018,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2027,6 +2028,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2036,6 +2038,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EquivalentLayerWindow.idf b/testfiles/EquivalentLayerWindow.idf index 4fffe3e8499..e8e7cea2cdb 100644 --- a/testfiles/EquivalentLayerWindow.idf +++ b/testfiles/EquivalentLayerWindow.idf @@ -616,6 +616,7 @@ ZONE ONE CONTROLS, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE ONE SETPOINTS; !- Control 1 Name diff --git a/testfiles/EvaporativeFluidCooler.idf b/testfiles/EvaporativeFluidCooler.idf index a69e804c82e..767b41af9ba 100644 --- a/testfiles/EvaporativeFluidCooler.idf +++ b/testfiles/EvaporativeFluidCooler.idf @@ -1949,6 +1949,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1958,6 +1959,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1967,6 +1969,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/EvaporativeFluidCooler_TwoSpeed.idf b/testfiles/EvaporativeFluidCooler_TwoSpeed.idf index 2b823e24c20..5c101dbd290 100644 --- a/testfiles/EvaporativeFluidCooler_TwoSpeed.idf +++ b/testfiles/EvaporativeFluidCooler_TwoSpeed.idf @@ -1962,6 +1962,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1971,6 +1972,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1980,6 +1982,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ExhFiredAbsorptionChiller.idf b/testfiles/ExhFiredAbsorptionChiller.idf index 1d77ec058e4..17c863317ba 100644 --- a/testfiles/ExhFiredAbsorptionChiller.idf +++ b/testfiles/ExhFiredAbsorptionChiller.idf @@ -2117,6 +2117,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2126,6 +2127,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2135,6 +2137,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FanCoilAutoSize.idf b/testfiles/FanCoilAutoSize.idf index a60efb992eb..52b60c09655 100644 --- a/testfiles/FanCoilAutoSize.idf +++ b/testfiles/FanCoilAutoSize.idf @@ -1755,6 +1755,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1764,6 +1765,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1773,6 +1775,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FanCoilAutoSizeScalableSizing.idf b/testfiles/FanCoilAutoSizeScalableSizing.idf index a12924fa102..1122e3fafe6 100644 --- a/testfiles/FanCoilAutoSizeScalableSizing.idf +++ b/testfiles/FanCoilAutoSizeScalableSizing.idf @@ -1755,6 +1755,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1764,6 +1765,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1773,6 +1775,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FanCoilAutoSize_ASHRAE90VariableFan.idf b/testfiles/FanCoilAutoSize_ASHRAE90VariableFan.idf index 57cedd298c7..4e593b43587 100644 --- a/testfiles/FanCoilAutoSize_ASHRAE90VariableFan.idf +++ b/testfiles/FanCoilAutoSize_ASHRAE90VariableFan.idf @@ -1736,6 +1736,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1745,6 +1746,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1754,6 +1756,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FanCoilAutoSize_MultiSpeedFan.idf b/testfiles/FanCoilAutoSize_MultiSpeedFan.idf index 5c24873997a..b39fc330246 100644 --- a/testfiles/FanCoilAutoSize_MultiSpeedFan.idf +++ b/testfiles/FanCoilAutoSize_MultiSpeedFan.idf @@ -1762,6 +1762,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1771,6 +1772,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1780,6 +1782,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FanCoil_HybridVent_VentSch.idf b/testfiles/FanCoil_HybridVent_VentSch.idf index a7675c687ec..6d04e41da54 100644 --- a/testfiles/FanCoil_HybridVent_VentSch.idf +++ b/testfiles/FanCoil_HybridVent_VentSch.idf @@ -1871,6 +1871,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1880,6 +1881,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type East zone Heating Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1889,6 +1891,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Fault_ChillerSWTSensorOffset_RefBldgLargeOfficeNew2004.idf b/testfiles/Fault_ChillerSWTSensorOffset_RefBldgLargeOfficeNew2004.idf index 65e2c2b05a6..41f4e8fbfbf 100644 --- a/testfiles/Fault_ChillerSWTSensorOffset_RefBldgLargeOfficeNew2004.idf +++ b/testfiles/Fault_ChillerSWTSensorOffset_RefBldgLargeOfficeNew2004.idf @@ -6194,6 +6194,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6201,6 +6202,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6208,6 +6210,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6215,6 +6218,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6222,6 +6226,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6229,6 +6234,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6236,6 +6242,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6243,6 +6250,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6250,6 +6258,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6257,6 +6266,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6264,6 +6274,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6271,6 +6282,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6278,6 +6290,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6285,6 +6298,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6292,6 +6306,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6299,6 +6314,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/Fault_CoilSATSensorOffset.idf b/testfiles/Fault_CoilSATSensorOffset.idf index 7c71f20d022..be4f26c3ea5 100644 --- a/testfiles/Fault_CoilSATSensorOffset.idf +++ b/testfiles/Fault_CoilSATSensorOffset.idf @@ -2232,6 +2232,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2243,6 +2244,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2254,6 +2256,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2265,6 +2268,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2276,6 +2280,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/Fault_CondenserSWTSensorOffset.idf b/testfiles/Fault_CondenserSWTSensorOffset.idf index 26441e2d645..0b27ccba72d 100644 --- a/testfiles/Fault_CondenserSWTSensorOffset.idf +++ b/testfiles/Fault_CondenserSWTSensorOffset.idf @@ -2021,6 +2021,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2030,6 +2031,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2039,6 +2041,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Fault_FoulingAirFilter_RefBldgMediumOfficeNew2004.idf b/testfiles/Fault_FoulingAirFilter_RefBldgMediumOfficeNew2004.idf index 9645b56f3f6..6ba9ce87d1c 100644 --- a/testfiles/Fault_FoulingAirFilter_RefBldgMediumOfficeNew2004.idf +++ b/testfiles/Fault_FoulingAirFilter_RefBldgMediumOfficeNew2004.idf @@ -5888,6 +5888,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5895,6 +5896,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5902,6 +5904,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5909,6 +5912,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5916,6 +5920,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5923,6 +5928,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5930,6 +5936,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5937,6 +5944,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5944,6 +5952,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5951,6 +5960,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5958,6 +5968,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5965,6 +5976,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5972,6 +5984,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5979,6 +5992,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -5986,6 +6000,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/Fault_FoulingChillerBoiler_RefBldgLargeOfficeNew2004.idf b/testfiles/Fault_FoulingChillerBoiler_RefBldgLargeOfficeNew2004.idf index 113d1be8b89..9ad437d0ce0 100644 --- a/testfiles/Fault_FoulingChillerBoiler_RefBldgLargeOfficeNew2004.idf +++ b/testfiles/Fault_FoulingChillerBoiler_RefBldgLargeOfficeNew2004.idf @@ -6209,6 +6209,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6216,6 +6217,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6223,6 +6225,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6230,6 +6233,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6237,6 +6241,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6244,6 +6249,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6251,6 +6257,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6258,6 +6265,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6265,6 +6273,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6272,6 +6281,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6279,6 +6289,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6286,6 +6297,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6293,6 +6305,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6300,6 +6313,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6307,6 +6321,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6314,6 +6329,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/Fault_FoulingCoil.idf b/testfiles/Fault_FoulingCoil.idf index 8197e41d957..1abd452acea 100644 --- a/testfiles/Fault_FoulingCoil.idf +++ b/testfiles/Fault_FoulingCoil.idf @@ -2104,6 +2104,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2115,6 +2116,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2126,6 +2128,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2137,6 +2140,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2148,6 +2152,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/Fault_FoulingCoolingTower.idf b/testfiles/Fault_FoulingCoolingTower.idf index 4f0626bcfaf..3f4aa8b8edf 100644 --- a/testfiles/Fault_FoulingCoolingTower.idf +++ b/testfiles/Fault_FoulingCoolingTower.idf @@ -2005,6 +2005,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2014,6 +2015,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2023,6 +2025,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Fault_FoulingEvapCooler_StripMallZoneEvapCooler.idf b/testfiles/Fault_FoulingEvapCooler_StripMallZoneEvapCooler.idf index d82cc080269..6cbde67c8ef 100644 --- a/testfiles/Fault_FoulingEvapCooler_StripMallZoneEvapCooler.idf +++ b/testfiles/Fault_FoulingEvapCooler_StripMallZoneEvapCooler.idf @@ -3945,6 +3945,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -3952,6 +3953,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -3959,6 +3961,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -3966,6 +3969,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -3973,6 +3977,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3980,6 +3985,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3987,6 +3993,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -3994,6 +4001,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -4001,6 +4009,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -4008,6 +4017,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/Fault_HumidistatOffset_Supermarket.idf b/testfiles/Fault_HumidistatOffset_Supermarket.idf index 95b530c2ee8..084a7d8aa8d 100644 --- a/testfiles/Fault_HumidistatOffset_Supermarket.idf +++ b/testfiles/Fault_HumidistatOffset_Supermarket.idf @@ -1346,6 +1346,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Fault_HumidistatOffset_ThermostatOffset_Supermarket.idf b/testfiles/Fault_HumidistatOffset_ThermostatOffset_Supermarket.idf index c6f2e5706a8..62a0a7063a5 100644 --- a/testfiles/Fault_HumidistatOffset_ThermostatOffset_Supermarket.idf +++ b/testfiles/Fault_HumidistatOffset_ThermostatOffset_Supermarket.idf @@ -1346,6 +1346,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Fault_ThermostatOffset_RefBldgMediumOfficeNew2004.idf b/testfiles/Fault_ThermostatOffset_RefBldgMediumOfficeNew2004.idf index 3e142c3e65f..b16f4fe6f31 100644 --- a/testfiles/Fault_ThermostatOffset_RefBldgMediumOfficeNew2004.idf +++ b/testfiles/Fault_ThermostatOffset_RefBldgMediumOfficeNew2004.idf @@ -5888,6 +5888,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5895,6 +5896,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5902,6 +5904,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5909,6 +5912,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5916,6 +5920,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5923,6 +5928,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5930,6 +5936,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5937,6 +5944,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5944,6 +5952,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5951,6 +5960,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5958,6 +5968,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5965,6 +5976,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5972,6 +5984,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5979,6 +5992,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -5986,6 +6000,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/Fenestration_RefBldgSmallHotelNew2004_Chicago.idf b/testfiles/Fenestration_RefBldgSmallHotelNew2004_Chicago.idf index e0aa6a4ff4d..0ead25221cf 100644 --- a/testfiles/Fenestration_RefBldgSmallHotelNew2004_Chicago.idf +++ b/testfiles/Fenestration_RefBldgSmallHotelNew2004_Chicago.idf @@ -23440,6 +23440,7 @@ CorridorFlr1 Thermostat, !- Name CorridorFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr1 DualSPSched;!- Control 1 Name @@ -23447,6 +23448,7 @@ CorridorFlr2 Thermostat, !- Name CorridorFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr2 DualSPSched;!- Control 1 Name @@ -23454,6 +23456,7 @@ CorridorFlr3 Thermostat, !- Name CorridorFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr3 DualSPSched;!- Control 1 Name @@ -23461,6 +23464,7 @@ CorridorFlr4 Thermostat, !- Name CorridorFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr4 DualSPSched;!- Control 1 Name @@ -23468,6 +23472,7 @@ EmployeeLoungeFlr1 Thermostat, !- Name EmployeeLoungeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type EmployeeLoungeFlr1 DualSPSched; !- Control 1 Name @@ -23475,6 +23480,7 @@ ExerciseCenterFlr1 Thermostat, !- Name ExerciseCenterFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ExerciseCenterFlr1 DualSPSched; !- Control 1 Name @@ -23482,6 +23488,7 @@ FrontLoungeFlr1 Thermostat, !- Name FrontLoungeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontLoungeFlr1 DualSPSched; !- Control 1 Name @@ -23489,6 +23496,7 @@ FrontOfficeFlr1 Thermostat, !- Name FrontOfficeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontOfficeFlr1 DualSPSched; !- Control 1 Name @@ -23496,6 +23504,7 @@ FrontStairsFlr1 Thermostat, !- Name FrontStairsFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr1 DualSPSched; !- Control 1 Name @@ -23503,6 +23512,7 @@ FrontStairsFlr2 Thermostat, !- Name FrontStairsFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr2 DualSPSched; !- Control 1 Name @@ -23510,6 +23520,7 @@ FrontStairsFlr3 Thermostat, !- Name FrontStairsFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr3 DualSPSched; !- Control 1 Name @@ -23517,6 +23528,7 @@ FrontStairsFlr4 Thermostat, !- Name FrontStairsFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr4 DualSPSched; !- Control 1 Name @@ -23524,6 +23536,7 @@ FrontStorageFlr1 Thermostat, !- Name FrontStorageFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr1 DualSPSched; !- Control 1 Name @@ -23531,6 +23544,7 @@ FrontStorageFlr2 Thermostat, !- Name FrontStorageFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr2 DualSPSched; !- Control 1 Name @@ -23538,6 +23552,7 @@ FrontStorageFlr3 Thermostat, !- Name FrontStorageFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr3 DualSPSched; !- Control 1 Name @@ -23545,6 +23560,7 @@ FrontStorageFlr4 Thermostat, !- Name FrontStorageFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr4 DualSPSched; !- Control 1 Name @@ -23552,6 +23568,7 @@ GuestRoom101 Thermostat, !- Name GuestRoom101, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom101 DualSPSched;!- Control 1 Name @@ -23559,6 +23576,7 @@ GuestRoom102 Thermostat, !- Name GuestRoom102, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom102 DualSPSched;!- Control 1 Name @@ -23566,6 +23584,7 @@ GuestRoom103 Thermostat, !- Name GuestRoom103, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom103 DualSPSched;!- Control 1 Name @@ -23573,6 +23592,7 @@ GuestRoom104 Thermostat, !- Name GuestRoom104, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom104 DualSPSched;!- Control 1 Name @@ -23580,6 +23600,7 @@ GuestRoom105 Thermostat, !- Name GuestRoom105, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom105 DualSPSched;!- Control 1 Name @@ -23587,6 +23608,7 @@ GuestRoom201 Thermostat, !- Name GuestRoom201, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom201 DualSPSched;!- Control 1 Name @@ -23594,6 +23616,7 @@ GuestRoom202_205 Thermostat, !- Name GuestRoom202_205, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom202_205 DualSPSched; !- Control 1 Name @@ -23601,6 +23624,7 @@ GuestRoom206_208 Thermostat, !- Name GuestRoom206_208, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom206_208 DualSPSched; !- Control 1 Name @@ -23608,6 +23632,7 @@ GuestRoom209_212 Thermostat, !- Name GuestRoom209_212, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom209_212 DualSPSched; !- Control 1 Name @@ -23615,6 +23640,7 @@ GuestRoom213 Thermostat, !- Name GuestRoom213, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom213 DualSPSched;!- Control 1 Name @@ -23622,6 +23648,7 @@ GuestRoom214 Thermostat, !- Name GuestRoom214, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom214 DualSPSched;!- Control 1 Name @@ -23629,6 +23656,7 @@ GuestRoom215_218 Thermostat, !- Name GuestRoom215_218, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom215_218 DualSPSched; !- Control 1 Name @@ -23636,6 +23664,7 @@ GuestRoom219 Thermostat, !- Name GuestRoom219, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom219 DualSPSched;!- Control 1 Name @@ -23643,6 +23672,7 @@ GuestRoom220_223 Thermostat, !- Name GuestRoom220_223, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom220_223 DualSPSched; !- Control 1 Name @@ -23650,6 +23680,7 @@ GuestRoom224 Thermostat, !- Name GuestRoom224, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom224 DualSPSched;!- Control 1 Name @@ -23657,6 +23688,7 @@ GuestRoom301 Thermostat, !- Name GuestRoom301, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom301 DualSPSched;!- Control 1 Name @@ -23664,6 +23696,7 @@ GuestRoom302_305 Thermostat, !- Name GuestRoom302_305, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom302_305 DualSPSched; !- Control 1 Name @@ -23671,6 +23704,7 @@ GuestRoom306_308 Thermostat, !- Name GuestRoom306_308, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom306_308 DualSPSched; !- Control 1 Name @@ -23678,6 +23712,7 @@ GuestRoom309_312 Thermostat, !- Name GuestRoom309_312, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom309_312 DualSPSched; !- Control 1 Name @@ -23685,6 +23720,7 @@ GuestRoom313 Thermostat, !- Name GuestRoom313, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom313 DualSPSched;!- Control 1 Name @@ -23692,6 +23728,7 @@ GuestRoom314 Thermostat, !- Name GuestRoom314, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom314 DualSPSched;!- Control 1 Name @@ -23699,6 +23736,7 @@ GuestRoom315_318 Thermostat, !- Name GuestRoom315_318, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom315_318 DualSPSched; !- Control 1 Name @@ -23706,6 +23744,7 @@ GuestRoom319 Thermostat, !- Name GuestRoom319, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom319 DualSPSched;!- Control 1 Name @@ -23713,6 +23752,7 @@ GuestRoom320_323 Thermostat, !- Name GuestRoom320_323, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom320_323 DualSPSched; !- Control 1 Name @@ -23720,6 +23760,7 @@ GuestRoom324 Thermostat, !- Name GuestRoom324, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom324 DualSPSched;!- Control 1 Name @@ -23727,6 +23768,7 @@ GuestRoom401 Thermostat, !- Name GuestRoom401, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom401 DualSPSched;!- Control 1 Name @@ -23734,6 +23776,7 @@ GuestRoom402_405 Thermostat, !- Name GuestRoom402_405, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom402_405 DualSPSched; !- Control 1 Name @@ -23741,6 +23784,7 @@ GuestRoom406_408 Thermostat, !- Name GuestRoom406_408, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom406_408 DualSPSched; !- Control 1 Name @@ -23748,6 +23792,7 @@ GuestRoom409_412 Thermostat, !- Name GuestRoom409_412, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom409_412 DualSPSched; !- Control 1 Name @@ -23755,6 +23800,7 @@ GuestRoom413 Thermostat, !- Name GuestRoom413, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom413 DualSPSched;!- Control 1 Name @@ -23762,6 +23808,7 @@ GuestRoom414 Thermostat, !- Name GuestRoom414, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom414 DualSPSched;!- Control 1 Name @@ -23769,6 +23816,7 @@ GuestRoom415_418 Thermostat, !- Name GuestRoom415_418, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom415_418 DualSPSched; !- Control 1 Name @@ -23776,6 +23824,7 @@ GuestRoom419 Thermostat, !- Name GuestRoom419, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom419 DualSPSched;!- Control 1 Name @@ -23783,6 +23832,7 @@ GuestRoom420_423 Thermostat, !- Name GuestRoom420_423, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom420_423 DualSPSched; !- Control 1 Name @@ -23790,6 +23840,7 @@ GuestRoom424 Thermostat, !- Name GuestRoom424, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom424 DualSPSched;!- Control 1 Name @@ -23797,6 +23848,7 @@ LaundryRoomFlr1 Thermostat, !- Name LaundryRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LaundryRoomFlr1 DualSPSched; !- Control 1 Name @@ -23804,6 +23856,7 @@ MechanicalRoomFlr1 Thermostat, !- Name MechanicalRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MechanicalRoomFlr1 DualSPSched; !- Control 1 Name @@ -23811,6 +23864,7 @@ MeetingRoomFlr1 Thermostat, !- Name MeetingRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MeetingRoomFlr1 DualSPSched; !- Control 1 Name @@ -23818,6 +23872,7 @@ RearStairsFlr1 Thermostat, !- Name RearStairsFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr1 DualSPSched; !- Control 1 Name @@ -23825,6 +23880,7 @@ RearStairsFlr2 Thermostat, !- Name RearStairsFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr2 DualSPSched; !- Control 1 Name @@ -23832,6 +23888,7 @@ RearStairsFlr3 Thermostat, !- Name RearStairsFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr3 DualSPSched; !- Control 1 Name @@ -23839,6 +23896,7 @@ RearStairsFlr4 Thermostat, !- Name RearStairsFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr4 DualSPSched; !- Control 1 Name @@ -23846,6 +23904,7 @@ RearStorageFlr1 Thermostat, !- Name RearStorageFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr1 DualSPSched; !- Control 1 Name @@ -23853,6 +23912,7 @@ RearStorageFlr2 Thermostat, !- Name RearStorageFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr2 DualSPSched; !- Control 1 Name @@ -23860,6 +23920,7 @@ RearStorageFlr3 Thermostat, !- Name RearStorageFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr3 DualSPSched; !- Control 1 Name @@ -23867,6 +23928,7 @@ RearStorageFlr4 Thermostat, !- Name RearStorageFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr4 DualSPSched; !- Control 1 Name @@ -23874,6 +23936,7 @@ RestroomFlr1 Thermostat, !- Name RestroomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RestroomFlr1 DualSPSched;!- Control 1 Name diff --git a/testfiles/Flr_Rf_8Sides.idf b/testfiles/Flr_Rf_8Sides.idf index 62fdabfd67f..88c3c854d70 100644 --- a/testfiles/Flr_Rf_8Sides.idf +++ b/testfiles/Flr_Rf_8Sides.idf @@ -637,6 +637,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 SETPOINTS; !- Control 1 Name diff --git a/testfiles/FluidCooler.idf b/testfiles/FluidCooler.idf index c568a6269d2..11219d7e64c 100644 --- a/testfiles/FluidCooler.idf +++ b/testfiles/FluidCooler.idf @@ -1946,6 +1946,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1955,6 +1956,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1964,6 +1966,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FluidCoolerTwoSpeed.idf b/testfiles/FluidCoolerTwoSpeed.idf index cfc4cb4932b..2699d90ab6e 100644 --- a/testfiles/FluidCoolerTwoSpeed.idf +++ b/testfiles/FluidCoolerTwoSpeed.idf @@ -1968,6 +1968,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1977,6 +1978,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1986,6 +1988,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FourPipeBeamLargeOffice.idf b/testfiles/FourPipeBeamLargeOffice.idf index 960d62579bf..4544c6133de 100644 --- a/testfiles/FourPipeBeamLargeOffice.idf +++ b/testfiles/FourPipeBeamLargeOffice.idf @@ -6163,6 +6163,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6170,6 +6171,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6177,6 +6179,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6184,6 +6187,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6191,6 +6195,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6198,6 +6203,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6205,6 +6211,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6212,6 +6219,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6219,6 +6227,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6226,6 +6235,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6233,6 +6243,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6240,6 +6251,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6247,6 +6259,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6254,6 +6267,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6261,6 +6275,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6268,6 +6283,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/FreeCoolingChiller.idf b/testfiles/FreeCoolingChiller.idf index 7ea9cda7b68..27503092e7b 100644 --- a/testfiles/FreeCoolingChiller.idf +++ b/testfiles/FreeCoolingChiller.idf @@ -2023,6 +2023,7 @@ West Zone Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2032,6 +2033,7 @@ East Zone Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2041,6 +2043,7 @@ North Zone Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FreeCoolingChiller_wWaterSideEconomizer.idf b/testfiles/FreeCoolingChiller_wWaterSideEconomizer.idf index 35d234a2a69..6c50d630fac 100644 --- a/testfiles/FreeCoolingChiller_wWaterSideEconomizer.idf +++ b/testfiles/FreeCoolingChiller_wWaterSideEconomizer.idf @@ -2213,6 +2213,7 @@ West Zone Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2222,6 +2223,7 @@ East Zone Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2231,6 +2233,7 @@ North Zone Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Furnace.idf b/testfiles/Furnace.idf index 85692bbc1f6..39c60d73eed 100644 --- a/testfiles/Furnace.idf +++ b/testfiles/Furnace.idf @@ -1241,6 +1241,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnaceFuelOil.idf b/testfiles/FurnaceFuelOil.idf index 47501197683..1e95ae1ac21 100644 --- a/testfiles/FurnaceFuelOil.idf +++ b/testfiles/FurnaceFuelOil.idf @@ -1242,6 +1242,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnacePLRHeatingCoil.idf b/testfiles/FurnacePLRHeatingCoil.idf index edda949ae86..aeef115ff8b 100644 --- a/testfiles/FurnacePLRHeatingCoil.idf +++ b/testfiles/FurnacePLRHeatingCoil.idf @@ -1371,6 +1371,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1380,6 +1381,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnaceWithDXSystem.idf b/testfiles/FurnaceWithDXSystem.idf index 7730aaf8421..5f69fe179fb 100644 --- a/testfiles/FurnaceWithDXSystem.idf +++ b/testfiles/FurnaceWithDXSystem.idf @@ -1295,6 +1295,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnaceWithDXSystemComfortControl.idf b/testfiles/FurnaceWithDXSystemComfortControl.idf index 65032d14533..e4898333fc9 100644 --- a/testfiles/FurnaceWithDXSystemComfortControl.idf +++ b/testfiles/FurnaceWithDXSystemComfortControl.idf @@ -1385,6 +1385,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnaceWithDXSystemRHcontrol.idf b/testfiles/FurnaceWithDXSystemRHcontrol.idf index ab26027094d..ab1df8896a0 100644 --- a/testfiles/FurnaceWithDXSystemRHcontrol.idf +++ b/testfiles/FurnaceWithDXSystemRHcontrol.idf @@ -1176,6 +1176,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/FurnaceWithDXSystemRHcontrol_cyclingfan.idf b/testfiles/FurnaceWithDXSystemRHcontrol_cyclingfan.idf index 67cf074a69d..bd3a9d8ad3f 100644 --- a/testfiles/FurnaceWithDXSystemRHcontrol_cyclingfan.idf +++ b/testfiles/FurnaceWithDXSystemRHcontrol_cyclingfan.idf @@ -1422,6 +1422,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/FurnaceWithDXSystem_CoolingHXAssisted.idf b/testfiles/FurnaceWithDXSystem_CoolingHXAssisted.idf index 345b4dc335a..db56beaa2e2 100644 --- a/testfiles/FurnaceWithDXSystem_CoolingHXAssisted.idf +++ b/testfiles/FurnaceWithDXSystem_CoolingHXAssisted.idf @@ -1402,6 +1402,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/FurnaceWithDXSystem_CoolingHXAssisted_NewDXCoil.idf b/testfiles/FurnaceWithDXSystem_CoolingHXAssisted_NewDXCoil.idf index c58737e961e..c27eb28a6d1 100644 --- a/testfiles/FurnaceWithDXSystem_CoolingHXAssisted_NewDXCoil.idf +++ b/testfiles/FurnaceWithDXSystem_CoolingHXAssisted_NewDXCoil.idf @@ -1402,6 +1402,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GSHP-GLHE-BoreholeFieldDesign.idf b/testfiles/GSHP-GLHE-BoreholeFieldDesign.idf index da07116e647..8de6175b5de 100644 --- a/testfiles/GSHP-GLHE-BoreholeFieldDesign.idf +++ b/testfiles/GSHP-GLHE-BoreholeFieldDesign.idf @@ -527,6 +527,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/GSHP-GLHE-CalcGFunctions-cpg.idf b/testfiles/GSHP-GLHE-CalcGFunctions-cpg.idf index ef69ad3bea6..264ee83faaf 100644 --- a/testfiles/GSHP-GLHE-CalcGFunctions-cpg.idf +++ b/testfiles/GSHP-GLHE-CalcGFunctions-cpg.idf @@ -573,6 +573,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/GSHP-GLHE-CalcGFunctions.idf b/testfiles/GSHP-GLHE-CalcGFunctions.idf index 49693639bae..a92ef588a32 100644 --- a/testfiles/GSHP-GLHE-CalcGFunctions.idf +++ b/testfiles/GSHP-GLHE-CalcGFunctions.idf @@ -573,6 +573,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/GSHP-GLHE.idf b/testfiles/GSHP-GLHE.idf index 465290334b1..121cefc49c1 100644 --- a/testfiles/GSHP-GLHE.idf +++ b/testfiles/GSHP-GLHE.idf @@ -2588,6 +2588,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2599,6 +2600,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2610,6 +2612,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2621,6 +2624,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2632,6 +2636,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/GSHP-Slinky.idf b/testfiles/GSHP-Slinky.idf index 3db48dbb924..89e121298ca 100644 --- a/testfiles/GSHP-Slinky.idf +++ b/testfiles/GSHP-Slinky.idf @@ -2588,6 +2588,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2599,6 +2600,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2610,6 +2612,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2621,6 +2624,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2632,6 +2636,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/GSHPSimple-GLHE.idf b/testfiles/GSHPSimple-GLHE.idf index c61c9661b5d..f4ff50dfb00 100644 --- a/testfiles/GSHPSimple-GLHE.idf +++ b/testfiles/GSHPSimple-GLHE.idf @@ -2019,6 +2019,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2028,6 +2029,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2037,6 +2039,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GasTurbChiller.idf b/testfiles/GasTurbChiller.idf index fe49d3b694a..f6cd5e59c88 100644 --- a/testfiles/GasTurbChiller.idf +++ b/testfiles/GasTurbChiller.idf @@ -2001,6 +2001,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2010,6 +2011,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2019,6 +2021,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GasTurbChillerHeatRecoveryAuto.idf b/testfiles/GasTurbChillerHeatRecoveryAuto.idf index 90f51ded7e5..3a9ce7810be 100644 --- a/testfiles/GasTurbChillerHeatRecoveryAuto.idf +++ b/testfiles/GasTurbChillerHeatRecoveryAuto.idf @@ -2395,6 +2395,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2402,6 +2403,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2409,6 +2411,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/Generators.idf b/testfiles/Generators.idf index affbf93115b..9189223b3a1 100644 --- a/testfiles/Generators.idf +++ b/testfiles/Generators.idf @@ -2179,6 +2179,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2188,6 +2189,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2197,6 +2199,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Generators_Transformer.idf b/testfiles/Generators_Transformer.idf index f31b9bf2888..2a80ef299fb 100644 --- a/testfiles/Generators_Transformer.idf +++ b/testfiles/Generators_Transformer.idf @@ -1256,6 +1256,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1265,6 +1266,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1274,6 +1276,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GeneratorswithPV.idf b/testfiles/GeneratorswithPV.idf index 12cef3da1e5..a0830517a63 100644 --- a/testfiles/GeneratorswithPV.idf +++ b/testfiles/GeneratorswithPV.idf @@ -577,6 +577,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GeneratorwithWindTurbine.idf b/testfiles/GeneratorwithWindTurbine.idf index 54e3fe55c00..7aac3b6ae26 100644 --- a/testfiles/GeneratorwithWindTurbine.idf +++ b/testfiles/GeneratorwithWindTurbine.idf @@ -462,6 +462,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/GeometryTest.idf b/testfiles/GeometryTest.idf index fc1d0e36b42..5b2970eedd2 100644 --- a/testfiles/GeometryTest.idf +++ b/testfiles/GeometryTest.idf @@ -2222,6 +2222,7 @@ PSI FOYER CONTROLS, !- Name PSI FOYER, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PSI FOYER SETPOINTS; !- Control 1 Name @@ -2299,6 +2300,7 @@ DORM ROOMS AND COMMON AREAS CONTROLS, !- Name DORM ROOMS AND COMMON AREAS, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DORM ROOMS AND COMMON AREAS SETPOINTS; !- Control 1 Name @@ -2376,6 +2378,7 @@ LEFT FORK CONTROLS, !- Name LEFT FORK, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LEFT FORK SETPOINTS; !- Control 1 Name @@ -2453,6 +2456,7 @@ MIDDLE FORK CONTROLS, !- Name MIDDLE FORK, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MIDDLE FORK SETPOINTS; !- Control 1 Name @@ -2530,6 +2534,7 @@ RIGHT FORK CONTROLS, !- Name RIGHT FORK, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RIGHT FORK SETPOINTS; !- Control 1 Name diff --git a/testfiles/GroundTempOSCCompactSched.idf b/testfiles/GroundTempOSCCompactSched.idf index 99a648fde04..3b1a43769b5 100644 --- a/testfiles/GroundTempOSCCompactSched.idf +++ b/testfiles/GroundTempOSCCompactSched.idf @@ -674,6 +674,7 @@ OSCTest-Thermostat, !- Name OSCTest, !- Zone or ZoneList Name OSCTest-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type OSCTest-Cooling Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/HPAirToAir_wSolarCollectorHWCoil.idf b/testfiles/HPAirToAir_wSolarCollectorHWCoil.idf index aa97b336abc..e4fda7790a2 100644 --- a/testfiles/HPAirToAir_wSolarCollectorHWCoil.idf +++ b/testfiles/HPAirToAir_wSolarCollectorHWCoil.idf @@ -1297,6 +1297,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/HP_wICSSolarCollector.idf b/testfiles/HP_wICSSolarCollector.idf index cfb2ac82d75..bb82b2e5f60 100644 --- a/testfiles/HP_wICSSolarCollector.idf +++ b/testfiles/HP_wICSSolarCollector.idf @@ -1503,6 +1503,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/HVACStandAloneERV_Economizer.idf b/testfiles/HVACStandAloneERV_Economizer.idf index 24372614809..7e6cc1c2a8c 100644 --- a/testfiles/HVACStandAloneERV_Economizer.idf +++ b/testfiles/HVACStandAloneERV_Economizer.idf @@ -1184,6 +1184,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1193,6 +1194,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1202,6 +1204,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeaderedPumpsConSpeed.idf b/testfiles/HeaderedPumpsConSpeed.idf index 5729f098dee..4e59ce41901 100644 --- a/testfiles/HeaderedPumpsConSpeed.idf +++ b/testfiles/HeaderedPumpsConSpeed.idf @@ -2956,6 +2956,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2967,6 +2968,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2978,6 +2980,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2989,6 +2992,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -3000,6 +3004,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/HeaderedPumpsVarSpeed.idf b/testfiles/HeaderedPumpsVarSpeed.idf index 014aa636de9..aa0d421d697 100644 --- a/testfiles/HeaderedPumpsVarSpeed.idf +++ b/testfiles/HeaderedPumpsVarSpeed.idf @@ -2212,6 +2212,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2223,6 +2224,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2234,6 +2236,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2245,6 +2248,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2256,6 +2260,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/HeatPump-ACCA-Sizing_PackagedTerminalHeatPump.idf b/testfiles/HeatPump-ACCA-Sizing_PackagedTerminalHeatPump.idf index 646911d4f5b..1447c795130 100644 --- a/testfiles/HeatPump-ACCA-Sizing_PackagedTerminalHeatPump.idf +++ b/testfiles/HeatPump-ACCA-Sizing_PackagedTerminalHeatPump.idf @@ -1429,6 +1429,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1451,6 +1452,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1460,6 +1462,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPump-ACCA-Sizing_UnitarySystem_HeatPumpAuto.idf b/testfiles/HeatPump-ACCA-Sizing_UnitarySystem_HeatPumpAuto.idf index ea9d8596d1f..2f77831351c 100644 --- a/testfiles/HeatPump-ACCA-Sizing_UnitarySystem_HeatPumpAuto.idf +++ b/testfiles/HeatPump-ACCA-Sizing_UnitarySystem_HeatPumpAuto.idf @@ -1655,6 +1655,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1664,6 +1665,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1673,6 +1675,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPump.idf b/testfiles/HeatPump.idf index 741806c9b3d..2871c2b0712 100644 --- a/testfiles/HeatPump.idf +++ b/testfiles/HeatPump.idf @@ -1434,6 +1434,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpAirToAirWithRHcontrol.idf b/testfiles/HeatPumpAirToAirWithRHcontrol.idf index 83316890af2..d1832f79dc4 100644 --- a/testfiles/HeatPumpAirToAirWithRHcontrol.idf +++ b/testfiles/HeatPumpAirToAirWithRHcontrol.idf @@ -1178,6 +1178,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/HeatPumpAuto.idf b/testfiles/HeatPumpAuto.idf index deaad8d462e..f108c78f77c 100644 --- a/testfiles/HeatPumpAuto.idf +++ b/testfiles/HeatPumpAuto.idf @@ -1616,6 +1616,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1625,6 +1626,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1634,6 +1636,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpCycFanWithEcono.idf b/testfiles/HeatPumpCycFanWithEcono.idf index 5b23f557eb6..fe0941057f2 100644 --- a/testfiles/HeatPumpCycFanWithEcono.idf +++ b/testfiles/HeatPumpCycFanWithEcono.idf @@ -1348,6 +1348,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpIAQP_DCV.idf b/testfiles/HeatPumpIAQP_DCV.idf index 0ddb9eb1ca9..aa45f391468 100644 --- a/testfiles/HeatPumpIAQP_DCV.idf +++ b/testfiles/HeatPumpIAQP_DCV.idf @@ -1577,6 +1577,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpIAQP_GenericContamControl.idf b/testfiles/HeatPumpIAQP_GenericContamControl.idf index aa589e562a5..51163bd519d 100644 --- a/testfiles/HeatPumpIAQP_GenericContamControl.idf +++ b/testfiles/HeatPumpIAQP_GenericContamControl.idf @@ -1679,6 +1679,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpProportionalControl_DCV.idf b/testfiles/HeatPumpProportionalControl_DCV.idf index 19f87f95d1a..13ff6a3676f 100644 --- a/testfiles/HeatPumpProportionalControl_DCV.idf +++ b/testfiles/HeatPumpProportionalControl_DCV.idf @@ -1577,6 +1577,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpProportionalControl_DCVDesignOccAllZones.idf b/testfiles/HeatPumpProportionalControl_DCVDesignOccAllZones.idf index 83bd2da4d15..4e2b97bf757 100644 --- a/testfiles/HeatPumpProportionalControl_DCVDesignOccAllZones.idf +++ b/testfiles/HeatPumpProportionalControl_DCVDesignOccAllZones.idf @@ -1602,6 +1602,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpProportionalControl_DCVDesignRate.idf b/testfiles/HeatPumpProportionalControl_DCVDesignRate.idf index 3d20850e4d8..f4cfc6fc455 100644 --- a/testfiles/HeatPumpProportionalControl_DCVDesignRate.idf +++ b/testfiles/HeatPumpProportionalControl_DCVDesignRate.idf @@ -1602,6 +1602,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpSecondaryCoil.idf b/testfiles/HeatPumpSecondaryCoil.idf index d86fe325106..d2f912de70d 100644 --- a/testfiles/HeatPumpSecondaryCoil.idf +++ b/testfiles/HeatPumpSecondaryCoil.idf @@ -1571,6 +1571,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1580,6 +1581,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpSimpleDCV.idf b/testfiles/HeatPumpSimpleDCV.idf index cc8773576bc..cc5ee298525 100644 --- a/testfiles/HeatPumpSimpleDCV.idf +++ b/testfiles/HeatPumpSimpleDCV.idf @@ -1501,6 +1501,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpVRP_DCV.idf b/testfiles/HeatPumpVRP_DCV.idf index 196905e0ea2..2b2db121912 100644 --- a/testfiles/HeatPumpVRP_DCV.idf +++ b/testfiles/HeatPumpVRP_DCV.idf @@ -1491,6 +1491,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpVSAS.idf b/testfiles/HeatPumpVSAS.idf index 2ba9381453c..a50081f2a04 100644 --- a/testfiles/HeatPumpVSAS.idf +++ b/testfiles/HeatPumpVSAS.idf @@ -1708,6 +1708,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpVSAS_variableCrankcaseHeaterCapacity.idf b/testfiles/HeatPumpVSAS_variableCrankcaseHeaterCapacity.idf index a915a93d3d8..da8f92ab4f5 100644 --- a/testfiles/HeatPumpVSAS_variableCrankcaseHeaterCapacity.idf +++ b/testfiles/HeatPumpVSAS_variableCrankcaseHeaterCapacity.idf @@ -1700,6 +1700,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpWaterHeater.idf b/testfiles/HeatPumpWaterHeater.idf index 14ecce0d33e..fc70083be6e 100644 --- a/testfiles/HeatPumpWaterHeater.idf +++ b/testfiles/HeatPumpWaterHeater.idf @@ -3098,6 +3098,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3105,6 +3106,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3117,6 +3119,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3124,6 +3127,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3131,6 +3135,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/HeatPumpWaterHeaterStratified.idf b/testfiles/HeatPumpWaterHeaterStratified.idf index bb51c952651..a6cbd279857 100644 --- a/testfiles/HeatPumpWaterHeaterStratified.idf +++ b/testfiles/HeatPumpWaterHeaterStratified.idf @@ -3186,6 +3186,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3193,6 +3194,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3205,6 +3207,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3212,6 +3215,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3219,6 +3223,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/HeatPumpWaterToAir.idf b/testfiles/HeatPumpWaterToAir.idf index 03b693809e4..3764dc85390 100644 --- a/testfiles/HeatPumpWaterToAir.idf +++ b/testfiles/HeatPumpWaterToAir.idf @@ -2132,6 +2132,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2141,6 +2142,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2150,6 +2152,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2534,6 +2537,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2543,6 +2547,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpWaterToAirEquationFit.idf b/testfiles/HeatPumpWaterToAirEquationFit.idf index ff22b54b440..a5596a05c8b 100644 --- a/testfiles/HeatPumpWaterToAirEquationFit.idf +++ b/testfiles/HeatPumpWaterToAirEquationFit.idf @@ -2122,6 +2122,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -2390,6 +2391,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -2651,6 +2653,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -2912,6 +2915,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -3173,6 +3177,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/HeatPumpWaterToAirEquationFit_WaterHeatingDesuperheater_StratifiedTank.idf b/testfiles/HeatPumpWaterToAirEquationFit_WaterHeatingDesuperheater_StratifiedTank.idf index 779e74059bd..045b9970a34 100644 --- a/testfiles/HeatPumpWaterToAirEquationFit_WaterHeatingDesuperheater_StratifiedTank.idf +++ b/testfiles/HeatPumpWaterToAirEquationFit_WaterHeatingDesuperheater_StratifiedTank.idf @@ -2124,6 +2124,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -2392,6 +2393,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -2653,6 +2655,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -2914,6 +2917,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -3175,6 +3179,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf b/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf index 85705a487e0..65e22ddb4b8 100644 --- a/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf +++ b/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel.idf @@ -1103,6 +1103,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf b/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf index 41189a539a5..c0eebb6323a 100644 --- a/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf +++ b/testfiles/HeatPumpWaterToAirWithAntifreezeAndLatentModel2.idf @@ -1103,6 +1103,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpWaterToAirWithHumControlDewPoint.idf b/testfiles/HeatPumpWaterToAirWithHumControlDewPoint.idf index 8e2609f3a6c..c6d78cc527b 100644 --- a/testfiles/HeatPumpWaterToAirWithHumControlDewPoint.idf +++ b/testfiles/HeatPumpWaterToAirWithHumControlDewPoint.idf @@ -2164,6 +2164,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -2440,6 +2441,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -2709,6 +2711,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -2978,6 +2981,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -3247,6 +3251,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/HeatPumpWaterToAirWithRHControl.idf b/testfiles/HeatPumpWaterToAirWithRHControl.idf index 2e1127876a8..7aa185fd093 100644 --- a/testfiles/HeatPumpWaterToAirWithRHControl.idf +++ b/testfiles/HeatPumpWaterToAirWithRHControl.idf @@ -2170,6 +2170,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -2445,6 +2446,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -2713,6 +2715,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -2981,6 +2984,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -3249,6 +3253,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/HeatPump_variableCrankcaseHeaterCapacity.idf b/testfiles/HeatPump_variableCrankcaseHeaterCapacity.idf index 565d6591d29..960d0e61cf0 100644 --- a/testfiles/HeatPump_variableCrankcaseHeaterCapacity.idf +++ b/testfiles/HeatPump_variableCrankcaseHeaterCapacity.idf @@ -1426,6 +1426,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatPumpwithBiquadraticCurves.idf b/testfiles/HeatPumpwithBiquadraticCurves.idf index 9c7c6caacf9..f21d34c72fd 100644 --- a/testfiles/HeatPumpwithBiquadraticCurves.idf +++ b/testfiles/HeatPumpwithBiquadraticCurves.idf @@ -1469,6 +1469,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/HeatRecoveryElectricChiller.idf b/testfiles/HeatRecoveryElectricChiller.idf index 5421a4c1b38..c3c337fe059 100644 --- a/testfiles/HeatRecoveryElectricChiller.idf +++ b/testfiles/HeatRecoveryElectricChiller.idf @@ -2132,6 +2132,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2139,6 +2140,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2146,6 +2148,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/HeatRecoveryPlantLoop.idf b/testfiles/HeatRecoveryPlantLoop.idf index b713d21bda2..953eaf41cf4 100644 --- a/testfiles/HeatRecoveryPlantLoop.idf +++ b/testfiles/HeatRecoveryPlantLoop.idf @@ -2523,6 +2523,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2530,6 +2531,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2537,6 +2539,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/HeatRecoveryPlantLoopAuto.idf b/testfiles/HeatRecoveryPlantLoopAuto.idf index 42a45227bec..fff4cb6339f 100644 --- a/testfiles/HeatRecoveryPlantLoopAuto.idf +++ b/testfiles/HeatRecoveryPlantLoopAuto.idf @@ -2708,6 +2708,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2715,6 +2716,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2722,6 +2724,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/HeatRecoverywithStorageTank.idf b/testfiles/HeatRecoverywithStorageTank.idf index b62231e6dc6..754e605dc8f 100644 --- a/testfiles/HeatRecoverywithStorageTank.idf +++ b/testfiles/HeatRecoverywithStorageTank.idf @@ -1271,6 +1271,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -1278,6 +1279,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -1285,6 +1287,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/HospitalBaseline.idf b/testfiles/HospitalBaseline.idf index 57b566b7a06..7499988ce5d 100644 --- a/testfiles/HospitalBaseline.idf +++ b/testfiles/HospitalBaseline.idf @@ -1787,6 +1787,7 @@ Floor 1 Cafe Thermostat, !- Name Floor 1 Cafe, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Cafe DualSPSched;!- Control 1 Name @@ -2538,6 +2539,7 @@ Floor 1 Clean Thermostat,!- Name Floor 1 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Clean DualSPSched; !- Control 1 Name @@ -3006,6 +3008,7 @@ Floor 1 Conference Thermostat, !- Name Floor 1 Conference, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Conference DualSPSched; !- Control 1 Name @@ -3457,6 +3460,7 @@ Floor 1 Dining Thermostat, !- Name Floor 1 Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Dining DualSPSched; !- Control 1 Name @@ -3908,6 +3912,7 @@ Floor 1 Elevator Thermostat, !- Name Floor 1 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Elevator DualSPSched; !- Control 1 Name @@ -4359,6 +4364,7 @@ Floor 1 Exam Thermostat, !- Name Floor 1 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Exam DualSPSched;!- Control 1 Name @@ -4823,6 +4829,7 @@ Floor 1 Food Storage Thermostat, !- Name Floor 1 Food Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Food Storage DualSPSched; !- Control 1 Name @@ -5415,6 +5422,7 @@ Floor 1 Gas Storage Thermostat, !- Name Floor 1 Gas Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Gas Storage DualSPSched; !- Control 1 Name @@ -5870,6 +5878,7 @@ Floor 1 Imaging Thermostat, !- Name Floor 1 Imaging, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Imaging DualSPSched; !- Control 1 Name @@ -6334,6 +6343,7 @@ Floor 1 Kitchen Thermostat, !- Name Floor 1 Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Kitchen DualSPSched; !- Control 1 Name @@ -6823,6 +6833,7 @@ Floor 1 Lab 1 Thermostat,!- Name Floor 1 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 1 DualSPSched; !- Control 1 Name @@ -7302,6 +7313,7 @@ Floor 1 Lab 2 Thermostat,!- Name Floor 1 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 2 DualSPSched; !- Control 1 Name @@ -7782,6 +7794,7 @@ Floor 1 Laundry Thermostat, !- Name Floor 1 Laundry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Laundry DualSPSched; !- Control 1 Name @@ -8287,6 +8300,7 @@ Floor 1 Lobby Thermostat,!- Name Floor 1 Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby DualSPSched; !- Control 1 Name @@ -8694,6 +8708,7 @@ Floor 1 Lounge Thermostat, !- Name Floor 1 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lounge DualSPSched; !- Control 1 Name @@ -9123,6 +9138,7 @@ Floor 1 Mech 1 Thermostat, !- Name Floor 1 Mech 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 1 DualSPSched; !- Control 1 Name @@ -9601,6 +9617,7 @@ Floor 1 Mech 2 Thermostat, !- Name Floor 1 Mech 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 2 DualSPSched; !- Control 1 Name @@ -10052,6 +10069,7 @@ Floor 1 Office 1 Thermostat, !- Name Floor 1 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 1 DualSPSched; !- Control 1 Name @@ -10503,6 +10521,7 @@ Floor 1 Office 2 Thermostat, !- Name Floor 1 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 2 DualSPSched; !- Control 1 Name @@ -10971,6 +10990,7 @@ Floor 1 Office 3 Thermostat, !- Name Floor 1 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 DualSPSched; !- Control 1 Name @@ -11422,6 +11442,7 @@ Floor 1 Office 3 Perimeter 1 Thermostat, !- Name Floor 1 Office 3 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 1 DualSPSched; !- Control 1 Name @@ -11873,6 +11894,7 @@ Floor 1 Office 3 Perimeter 2 Thermostat, !- Name Floor 1 Office 3 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 2 DualSPSched; !- Control 1 Name @@ -12339,6 +12361,7 @@ Floor 1 Office 3 Perimeter 3 Thermostat, !- Name Floor 1 Office 3 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 3 DualSPSched; !- Control 1 Name @@ -12790,6 +12813,7 @@ Floor 1 Patient Thermostat, !- Name Floor 1 Patient, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Patient DualSPSched; !- Control 1 Name @@ -13197,6 +13221,7 @@ Floor 1 Pharmacy Thermostat, !- Name Floor 1 Pharmacy, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pharmacy DualSPSched; !- Control 1 Name @@ -13604,6 +13629,7 @@ Floor 1 Physical Therapy Thermostat, !- Name Floor 1 Physical Therapy,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Physical Therapy DualSPSched; !- Control 1 Name @@ -14033,6 +14059,7 @@ Floor 1 Receiving Thermostat, !- Name Floor 1 Receiving, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Receiving DualSPSched; !- Control 1 Name @@ -14484,6 +14511,7 @@ Floor 1 Reception Thermostat, !- Name Floor 1 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Reception DualSPSched; !- Control 1 Name @@ -14863,6 +14891,7 @@ Floor 1 Soil Thermostat, !- Name Floor 1 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil DualSPSched;!- Control 1 Name @@ -15253,6 +15282,7 @@ Floor 1 Storage Thermostat, !- Name Floor 1 Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Storage DualSPSched; !- Control 1 Name @@ -15660,6 +15690,7 @@ Floor 1 Waiting Thermostat, !- Name Floor 1 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Waiting DualSPSched; !- Control 1 Name @@ -16126,6 +16157,7 @@ Floor 2 Chapel Thermostat, !- Name Floor 2 Chapel, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Chapel DualSPSched; !- Control 1 Name @@ -16533,6 +16565,7 @@ Floor 2 Clean 1 Thermostat, !- Name Floor 2 Clean 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 1 DualSPSched; !- Control 1 Name @@ -16940,6 +16973,7 @@ Floor 2 Clean 2 Thermostat, !- Name Floor 2 Clean 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 2 DualSPSched; !- Control 1 Name @@ -17371,6 +17405,7 @@ Floor 2 Corridor Thermostat, !- Name Floor 2 Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Corridor DualSPSched; !- Control 1 Name @@ -17822,6 +17857,7 @@ Floor 2 Elevator Thermostat, !- Name Floor 2 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Elevator DualSPSched; !- Control 1 Name @@ -18288,6 +18324,7 @@ Floor 2 Exam 1 Thermostat, !- Name Floor 2 Exam 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 1 DualSPSched; !- Control 1 Name @@ -18695,6 +18732,7 @@ Floor 2 Exam 2 Thermostat, !- Name Floor 2 Exam 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 2 DualSPSched; !- Control 1 Name @@ -19102,6 +19140,7 @@ Floor 2 Exam 3 Thermostat, !- Name Floor 2 Exam 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 3 DualSPSched; !- Control 1 Name @@ -19526,6 +19565,7 @@ Floor 2 Exam 4 Thermostat, !- Name Floor 2 Exam 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 4 DualSPSched; !- Control 1 Name @@ -19977,6 +20017,7 @@ Floor 2 Gift Shop Thermostat, !- Name Floor 2 Gift Shop, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Gift Shop DualSPSched; !- Control 1 Name @@ -20412,6 +20453,7 @@ Floor 2 Imaging 1 Thermostat, !- Name Floor 2 Imaging 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 1 DualSPSched; !- Control 1 Name @@ -20908,6 +20950,7 @@ Floor 2 Imaging 2 Thermostat, !- Name Floor 2 Imaging 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 2 DualSPSched; !- Control 1 Name @@ -21402,6 +21445,7 @@ Floor 2 Imaging 3 Thermostat, !- Name Floor 2 Imaging 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 3 DualSPSched; !- Control 1 Name @@ -21837,6 +21881,7 @@ Floor 2 Lab 1 Thermostat,!- Name Floor 2 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 1 DualSPSched; !- Control 1 Name @@ -22295,6 +22340,7 @@ Floor 2 Lab 2 Thermostat,!- Name Floor 2 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 2 DualSPSched; !- Control 1 Name @@ -22702,6 +22748,7 @@ Floor 2 Lockers Thermostat, !- Name Floor 2 Lockers, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lockers DualSPSched; !- Control 1 Name @@ -23129,6 +23176,7 @@ Floor 2 Lounge 1 Thermostat, !- Name Floor 2 Lounge 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 1 DualSPSched; !- Control 1 Name @@ -23595,6 +23643,7 @@ Floor 2 Lounge 2 Thermostat, !- Name Floor 2 Lounge 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 2 DualSPSched; !- Control 1 Name @@ -24030,6 +24079,7 @@ Floor 2 Nurse Station 1 Thermostat, !- Name Floor 2 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -24526,6 +24576,7 @@ Floor 2 Nurse Station 2 Thermostat, !- Name Floor 2 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -24933,6 +24984,7 @@ Floor 2 Office 1 Thermostat, !- Name Floor 2 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 1 DualSPSched; !- Control 1 Name @@ -25384,6 +25436,7 @@ Floor 2 Office 2 Thermostat, !- Name Floor 2 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 2 DualSPSched; !- Control 1 Name @@ -25791,6 +25844,7 @@ Floor 2 Office 3 Thermostat, !- Name Floor 2 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 3 DualSPSched; !- Control 1 Name @@ -26257,6 +26311,7 @@ Floor 2 Office 4 Thermostat, !- Name Floor 2 Office 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 4 DualSPSched; !- Control 1 Name @@ -26800,6 +26855,7 @@ Floor 2 Operating Thermostat, !- Name Floor 2 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Operating DualSPSched; !- Control 1 Name @@ -27302,6 +27358,7 @@ Floor 2 PACU Thermostat, !- Name Floor 2 PACU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 PACU DualSPSched;!- Control 1 Name @@ -27753,6 +27810,7 @@ Floor 2 Patient 1 Thermostat, !- Name Floor 2 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 1 DualSPSched; !- Control 1 Name @@ -28160,6 +28218,7 @@ Floor 2 Patient 2 Thermostat, !- Name Floor 2 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 2 DualSPSched; !- Control 1 Name @@ -28595,6 +28654,7 @@ Floor 2 Procedure 1 Thermostat, !- Name Floor 2 Procedure 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 1 DualSPSched; !- Control 1 Name @@ -29030,6 +29090,7 @@ Floor 2 Procedure 2 Thermostat, !- Name Floor 2 Procedure 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 2 DualSPSched; !- Control 1 Name @@ -29481,6 +29542,7 @@ Floor 2 Reception Thermostat, !- Name Floor 2 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception DualSPSched; !- Control 1 Name @@ -29932,6 +29994,7 @@ Floor 2 Restroom 1 Thermostat, !- Name Floor 2 Restroom 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 1 DualSPSched; !- Control 1 Name @@ -30403,6 +30466,7 @@ Floor 2 Restroom 2 Thermostat, !- Name Floor 2 Restroom 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 2 DualSPSched; !- Control 1 Name @@ -30802,6 +30866,7 @@ Floor 2 Soil 1 Thermostat, !- Name Floor 2 Soil 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 1 DualSPSched; !- Control 1 Name @@ -31201,6 +31266,7 @@ Floor 2 Soil 2 Thermostat, !- Name Floor 2 Soil 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 2 DualSPSched; !- Control 1 Name @@ -31648,6 +31714,7 @@ Floor 2 Sterilizing Thermostat, !- Name Floor 2 Sterilizing, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Sterilizing DualSPSched; !- Control 1 Name @@ -32038,6 +32105,7 @@ Floor 2 Storage 1 Thermostat, !- Name Floor 2 Storage 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 1 DualSPSched; !- Control 1 Name @@ -32408,6 +32476,7 @@ Floor 2 Storage 2 Thermostat, !- Name Floor 2 Storage 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 2 DualSPSched; !- Control 1 Name @@ -32843,6 +32912,7 @@ Floor 2 Trauma Thermostat, !- Name Floor 2 Trauma, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Trauma DualSPSched; !- Control 1 Name @@ -33294,6 +33364,7 @@ Floor 2 Triage Thermostat, !- Name Floor 2 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Triage DualSPSched; !- Control 1 Name @@ -33786,6 +33857,7 @@ Floor 2 Waiting Thermostat, !- Name Floor 2 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Waiting DualSPSched; !- Control 1 Name @@ -34193,6 +34265,7 @@ Floor 3 Clean Thermostat,!- Name Floor 3 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Clean DualSPSched; !- Control 1 Name @@ -34674,6 +34747,7 @@ Floor 3 Elevator Thermostat, !- Name Floor 3 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Elevator DualSPSched; !- Control 1 Name @@ -35081,6 +35155,7 @@ Floor 3 Exam Thermostat, !- Name Floor 3 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Exam DualSPSched;!- Control 1 Name @@ -35575,6 +35650,7 @@ Floor 3 ICU Thermostat, !- Name Floor 3 ICU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 ICU DualSPSched; !- Control 1 Name @@ -36060,6 +36136,7 @@ Floor 3 Nurse Station 1 Thermostat, !- Name Floor 3 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -36554,6 +36631,7 @@ Floor 3 Nurse Station 2 Thermostat, !- Name Floor 3 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -37005,6 +37083,7 @@ Floor 3 Nursery Thermostat, !- Name Floor 3 Nursery, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nursery DualSPSched; !- Control 1 Name @@ -37456,6 +37535,7 @@ Floor 3 Office Thermostat, !- Name Floor 3 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office DualSPSched; !- Control 1 Name @@ -37935,6 +38015,7 @@ Floor 3 Operating Thermostat, !- Name Floor 3 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Operating DualSPSched; !- Control 1 Name @@ -38401,6 +38482,7 @@ Floor 3 Patient 1 Thermostat, !- Name Floor 3 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 1 DualSPSched; !- Control 1 Name @@ -38867,6 +38949,7 @@ Floor 3 Patient 2 Thermostat, !- Name Floor 3 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 2 DualSPSched; !- Control 1 Name @@ -39350,6 +39433,7 @@ Floor 3 Patient 3 Thermostat, !- Name Floor 3 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 3 DualSPSched; !- Control 1 Name @@ -39816,6 +39900,7 @@ Floor 3 Patient 4 Thermostat, !- Name Floor 3 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 4 DualSPSched; !- Control 1 Name @@ -40245,6 +40330,7 @@ Floor 3 Patient Corridor 1 Thermostat, !- Name Floor 3 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -40674,6 +40760,7 @@ Floor 3 Patient Corridor 2 Thermostat, !- Name Floor 3 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -41153,6 +41240,7 @@ Floor 3 Procedure Thermostat, !- Name Floor 3 Procedure, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Procedure DualSPSched; !- Control 1 Name @@ -41532,6 +41620,7 @@ Floor 3 Soil Thermostat, !- Name Floor 3 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Soil DualSPSched;!- Control 1 Name @@ -41966,6 +42055,7 @@ Floor 3 Supply Thermostat, !- Name Floor 3 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Supply DualSPSched; !- Control 1 Name @@ -42417,6 +42507,7 @@ Floor 3 Triage Thermostat, !- Name Floor 3 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Triage DualSPSched; !- Control 1 Name @@ -42894,6 +42985,7 @@ Floor 3 Waiting Thermostat, !- Name Floor 3 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Waiting DualSPSched; !- Control 1 Name @@ -43301,6 +43393,7 @@ Floor 4-6 Clean Thermostat, !- Name Floor 4-6 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Clean DualSPSched; !- Control 1 Name @@ -43782,6 +43875,7 @@ Floor 4-6 Elevator Thermostat, !- Name Floor 4-6 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Elevator DualSPSched; !- Control 1 Name @@ -44261,6 +44355,7 @@ Floor 4-6 Nurse Station Thermostat, !- Name Floor 4-6 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Nurse Station DualSPSched; !- Control 1 Name @@ -44712,6 +44807,7 @@ Floor 4-6 Office Thermostat, !- Name Floor 4-6 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Office DualSPSched; !- Control 1 Name @@ -45178,6 +45274,7 @@ Floor 4-6 Patient 1 Thermostat, !- Name Floor 4-6 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 1 DualSPSched; !- Control 1 Name @@ -45644,6 +45741,7 @@ Floor 4-6 Patient 2 Thermostat, !- Name Floor 4-6 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 2 DualSPSched; !- Control 1 Name @@ -46110,6 +46208,7 @@ Floor 4-6 Patient 3 Thermostat, !- Name Floor 4-6 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 3 DualSPSched; !- Control 1 Name @@ -46576,6 +46675,7 @@ Floor 4-6 Patient 4 Thermostat, !- Name Floor 4-6 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 4 DualSPSched; !- Control 1 Name @@ -47005,6 +47105,7 @@ Floor 4-6 Patient Corridor 1 Thermostat, !- Name Floor 4-6 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -47434,6 +47535,7 @@ Floor 4-6 Patient Corridor 2 Thermostat, !- Name Floor 4-6 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -47813,6 +47915,7 @@ Floor 4-6 Soil Thermostat, !- Name Floor 4-6 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Soil DualSPSched; !- Control 1 Name @@ -48247,6 +48350,7 @@ Floor 4-6 Supply Thermostat, !- Name Floor 4-6 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Supply DualSPSched; !- Control 1 Name @@ -48654,6 +48758,7 @@ Floor 7 Clean Thermostat,!- Name Floor 7 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Clean DualSPSched; !- Control 1 Name @@ -49135,6 +49240,7 @@ Floor 7 Elevator Thermostat, !- Name Floor 7 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Elevator DualSPSched; !- Control 1 Name @@ -49614,6 +49720,7 @@ Floor 7 Nurse Station Thermostat, !- Name Floor 7 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Nurse Station DualSPSched; !- Control 1 Name @@ -50065,6 +50172,7 @@ Floor 7 Office Thermostat, !- Name Floor 7 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Office DualSPSched; !- Control 1 Name @@ -50531,6 +50639,7 @@ Floor 7 Patient 1 Thermostat, !- Name Floor 7 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 1 DualSPSched; !- Control 1 Name @@ -50997,6 +51106,7 @@ Floor 7 Patient 2 Thermostat, !- Name Floor 7 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 2 DualSPSched; !- Control 1 Name @@ -51463,6 +51573,7 @@ Floor 7 Patient 3 Thermostat, !- Name Floor 7 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 3 DualSPSched; !- Control 1 Name @@ -51929,6 +52040,7 @@ Floor 7 Patient 4 Thermostat, !- Name Floor 7 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 4 DualSPSched; !- Control 1 Name @@ -52358,6 +52470,7 @@ Floor 7 Patient Corridor 1 Thermostat, !- Name Floor 7 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -52787,6 +52900,7 @@ Floor 7 Patient Corridor 2 Thermostat, !- Name Floor 7 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -53166,6 +53280,7 @@ Floor 7 Soil Thermostat, !- Name Floor 7 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Soil DualSPSched;!- Control 1 Name @@ -53600,6 +53715,7 @@ Floor 7 Supply Thermostat, !- Name Floor 7 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Supply DualSPSched; !- Control 1 Name @@ -54007,6 +54123,7 @@ MOB Floor 1 Core Thermostat, !- Name MOB Floor 1 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Core DualSPSched; !- Control 1 Name @@ -54458,6 +54575,7 @@ MOB Floor 1 Perimeter 1 Thermostat, !- Name MOB Floor 1 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 1 DualSPSched; !- Control 1 Name @@ -54909,6 +55027,7 @@ MOB Floor 1 Perimeter 2 Thermostat, !- Name MOB Floor 1 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 2 DualSPSched; !- Control 1 Name @@ -55360,6 +55479,7 @@ MOB Floor 1 Perimeter 3 Thermostat, !- Name MOB Floor 1 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 3 DualSPSched; !- Control 1 Name @@ -55767,6 +55887,7 @@ MOB Floor 2-4 Core Thermostat, !- Name MOB Floor 2-4 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Core DualSPSched; !- Control 1 Name @@ -56218,6 +56339,7 @@ MOB Floor 2-4 Perimeter 1 Thermostat, !- Name MOB Floor 2-4 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 1 DualSPSched; !- Control 1 Name @@ -56669,6 +56791,7 @@ MOB Floor 2-4 Perimeter 2 Thermostat, !- Name MOB Floor 2-4 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 2 DualSPSched; !- Control 1 Name @@ -57120,6 +57243,7 @@ MOB Floor 2-4 Perimeter 3 Thermostat, !- Name MOB Floor 2-4 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 3 DualSPSched; !- Control 1 Name @@ -57571,6 +57695,7 @@ MOB Floor 2-4 Perimeter 4 Thermostat, !- Name MOB Floor 2-4 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 4 DualSPSched; !- Control 1 Name @@ -57978,6 +58103,7 @@ MOB Floor 5 Core Thermostat, !- Name MOB Floor 5 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Core DualSPSched; !- Control 1 Name @@ -58429,6 +58555,7 @@ MOB Floor 5 Perimeter 1 Thermostat, !- Name MOB Floor 5 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 1 DualSPSched; !- Control 1 Name @@ -58880,6 +59007,7 @@ MOB Floor 5 Perimeter 2 Thermostat, !- Name MOB Floor 5 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 2 DualSPSched; !- Control 1 Name @@ -59331,6 +59459,7 @@ MOB Floor 5 Perimeter 3 Thermostat, !- Name MOB Floor 5 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 3 DualSPSched; !- Control 1 Name @@ -59804,6 +59933,7 @@ MOB Floor 5 Perimeter 4 Thermostat, !- Name MOB Floor 5 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 4 DualSPSched; !- Control 1 Name diff --git a/testfiles/HospitalBaselineReheatReportEMS.idf b/testfiles/HospitalBaselineReheatReportEMS.idf index 27922d31891..e5548ecbcd2 100644 --- a/testfiles/HospitalBaselineReheatReportEMS.idf +++ b/testfiles/HospitalBaselineReheatReportEMS.idf @@ -1787,6 +1787,7 @@ Floor 1 Cafe Thermostat, !- Name Floor 1 Cafe, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Cafe DualSPSched;!- Control 1 Name @@ -2538,6 +2539,7 @@ Floor 1 Clean Thermostat,!- Name Floor 1 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Clean DualSPSched; !- Control 1 Name @@ -3006,6 +3008,7 @@ Floor 1 Conference Thermostat, !- Name Floor 1 Conference, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Conference DualSPSched; !- Control 1 Name @@ -3457,6 +3460,7 @@ Floor 1 Dining Thermostat, !- Name Floor 1 Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Dining DualSPSched; !- Control 1 Name @@ -3908,6 +3912,7 @@ Floor 1 Elevator Thermostat, !- Name Floor 1 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Elevator DualSPSched; !- Control 1 Name @@ -4359,6 +4364,7 @@ Floor 1 Exam Thermostat, !- Name Floor 1 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Exam DualSPSched;!- Control 1 Name @@ -4823,6 +4829,7 @@ Floor 1 Food Storage Thermostat, !- Name Floor 1 Food Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Food Storage DualSPSched; !- Control 1 Name @@ -5415,6 +5422,7 @@ Floor 1 Gas Storage Thermostat, !- Name Floor 1 Gas Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Gas Storage DualSPSched; !- Control 1 Name @@ -5870,6 +5878,7 @@ Floor 1 Imaging Thermostat, !- Name Floor 1 Imaging, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Imaging DualSPSched; !- Control 1 Name @@ -6334,6 +6343,7 @@ Floor 1 Kitchen Thermostat, !- Name Floor 1 Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Kitchen DualSPSched; !- Control 1 Name @@ -6823,6 +6833,7 @@ Floor 1 Lab 1 Thermostat,!- Name Floor 1 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 1 DualSPSched; !- Control 1 Name @@ -7302,6 +7313,7 @@ Floor 1 Lab 2 Thermostat,!- Name Floor 1 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 2 DualSPSched; !- Control 1 Name @@ -7782,6 +7794,7 @@ Floor 1 Laundry Thermostat, !- Name Floor 1 Laundry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Laundry DualSPSched; !- Control 1 Name @@ -8287,6 +8300,7 @@ Floor 1 Lobby Thermostat,!- Name Floor 1 Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby DualSPSched; !- Control 1 Name @@ -8694,6 +8708,7 @@ Floor 1 Lounge Thermostat, !- Name Floor 1 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lounge DualSPSched; !- Control 1 Name @@ -9123,6 +9138,7 @@ Floor 1 Mech 1 Thermostat, !- Name Floor 1 Mech 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 1 DualSPSched; !- Control 1 Name @@ -9601,6 +9617,7 @@ Floor 1 Mech 2 Thermostat, !- Name Floor 1 Mech 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 2 DualSPSched; !- Control 1 Name @@ -10052,6 +10069,7 @@ Floor 1 Office 1 Thermostat, !- Name Floor 1 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 1 DualSPSched; !- Control 1 Name @@ -10503,6 +10521,7 @@ Floor 1 Office 2 Thermostat, !- Name Floor 1 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 2 DualSPSched; !- Control 1 Name @@ -10971,6 +10990,7 @@ Floor 1 Office 3 Thermostat, !- Name Floor 1 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 DualSPSched; !- Control 1 Name @@ -11422,6 +11442,7 @@ Floor 1 Office 3 Perimeter 1 Thermostat, !- Name Floor 1 Office 3 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 1 DualSPSched; !- Control 1 Name @@ -11873,6 +11894,7 @@ Floor 1 Office 3 Perimeter 2 Thermostat, !- Name Floor 1 Office 3 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 2 DualSPSched; !- Control 1 Name @@ -12339,6 +12361,7 @@ Floor 1 Office 3 Perimeter 3 Thermostat, !- Name Floor 1 Office 3 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 3 DualSPSched; !- Control 1 Name @@ -12790,6 +12813,7 @@ Floor 1 Patient Thermostat, !- Name Floor 1 Patient, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Patient DualSPSched; !- Control 1 Name @@ -13197,6 +13221,7 @@ Floor 1 Pharmacy Thermostat, !- Name Floor 1 Pharmacy, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pharmacy DualSPSched; !- Control 1 Name @@ -13604,6 +13629,7 @@ Floor 1 Physical Therapy Thermostat, !- Name Floor 1 Physical Therapy,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Physical Therapy DualSPSched; !- Control 1 Name @@ -14033,6 +14059,7 @@ Floor 1 Receiving Thermostat, !- Name Floor 1 Receiving, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Receiving DualSPSched; !- Control 1 Name @@ -14484,6 +14511,7 @@ Floor 1 Reception Thermostat, !- Name Floor 1 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Reception DualSPSched; !- Control 1 Name @@ -14863,6 +14891,7 @@ Floor 1 Soil Thermostat, !- Name Floor 1 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil DualSPSched;!- Control 1 Name @@ -15253,6 +15282,7 @@ Floor 1 Storage Thermostat, !- Name Floor 1 Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Storage DualSPSched; !- Control 1 Name @@ -15660,6 +15690,7 @@ Floor 1 Waiting Thermostat, !- Name Floor 1 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Waiting DualSPSched; !- Control 1 Name @@ -16126,6 +16157,7 @@ Floor 2 Chapel Thermostat, !- Name Floor 2 Chapel, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Chapel DualSPSched; !- Control 1 Name @@ -16533,6 +16565,7 @@ Floor 2 Clean 1 Thermostat, !- Name Floor 2 Clean 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 1 DualSPSched; !- Control 1 Name @@ -16940,6 +16973,7 @@ Floor 2 Clean 2 Thermostat, !- Name Floor 2 Clean 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 2 DualSPSched; !- Control 1 Name @@ -17371,6 +17405,7 @@ Floor 2 Corridor Thermostat, !- Name Floor 2 Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Corridor DualSPSched; !- Control 1 Name @@ -17822,6 +17857,7 @@ Floor 2 Elevator Thermostat, !- Name Floor 2 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Elevator DualSPSched; !- Control 1 Name @@ -18288,6 +18324,7 @@ Floor 2 Exam 1 Thermostat, !- Name Floor 2 Exam 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 1 DualSPSched; !- Control 1 Name @@ -18695,6 +18732,7 @@ Floor 2 Exam 2 Thermostat, !- Name Floor 2 Exam 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 2 DualSPSched; !- Control 1 Name @@ -19102,6 +19140,7 @@ Floor 2 Exam 3 Thermostat, !- Name Floor 2 Exam 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 3 DualSPSched; !- Control 1 Name @@ -19526,6 +19565,7 @@ Floor 2 Exam 4 Thermostat, !- Name Floor 2 Exam 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 4 DualSPSched; !- Control 1 Name @@ -19977,6 +20017,7 @@ Floor 2 Gift Shop Thermostat, !- Name Floor 2 Gift Shop, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Gift Shop DualSPSched; !- Control 1 Name @@ -20412,6 +20453,7 @@ Floor 2 Imaging 1 Thermostat, !- Name Floor 2 Imaging 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 1 DualSPSched; !- Control 1 Name @@ -20908,6 +20950,7 @@ Floor 2 Imaging 2 Thermostat, !- Name Floor 2 Imaging 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 2 DualSPSched; !- Control 1 Name @@ -21402,6 +21445,7 @@ Floor 2 Imaging 3 Thermostat, !- Name Floor 2 Imaging 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 3 DualSPSched; !- Control 1 Name @@ -21837,6 +21881,7 @@ Floor 2 Lab 1 Thermostat,!- Name Floor 2 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 1 DualSPSched; !- Control 1 Name @@ -22295,6 +22340,7 @@ Floor 2 Lab 2 Thermostat,!- Name Floor 2 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 2 DualSPSched; !- Control 1 Name @@ -22702,6 +22748,7 @@ Floor 2 Lockers Thermostat, !- Name Floor 2 Lockers, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lockers DualSPSched; !- Control 1 Name @@ -23129,6 +23176,7 @@ Floor 2 Lounge 1 Thermostat, !- Name Floor 2 Lounge 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 1 DualSPSched; !- Control 1 Name @@ -23595,6 +23643,7 @@ Floor 2 Lounge 2 Thermostat, !- Name Floor 2 Lounge 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 2 DualSPSched; !- Control 1 Name @@ -24030,6 +24079,7 @@ Floor 2 Nurse Station 1 Thermostat, !- Name Floor 2 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -24526,6 +24576,7 @@ Floor 2 Nurse Station 2 Thermostat, !- Name Floor 2 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -24933,6 +24984,7 @@ Floor 2 Office 1 Thermostat, !- Name Floor 2 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 1 DualSPSched; !- Control 1 Name @@ -25384,6 +25436,7 @@ Floor 2 Office 2 Thermostat, !- Name Floor 2 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 2 DualSPSched; !- Control 1 Name @@ -25791,6 +25844,7 @@ Floor 2 Office 3 Thermostat, !- Name Floor 2 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 3 DualSPSched; !- Control 1 Name @@ -26257,6 +26311,7 @@ Floor 2 Office 4 Thermostat, !- Name Floor 2 Office 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 4 DualSPSched; !- Control 1 Name @@ -26800,6 +26855,7 @@ Floor 2 Operating Thermostat, !- Name Floor 2 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Operating DualSPSched; !- Control 1 Name @@ -27302,6 +27358,7 @@ Floor 2 PACU Thermostat, !- Name Floor 2 PACU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 PACU DualSPSched;!- Control 1 Name @@ -27753,6 +27810,7 @@ Floor 2 Patient 1 Thermostat, !- Name Floor 2 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 1 DualSPSched; !- Control 1 Name @@ -28160,6 +28218,7 @@ Floor 2 Patient 2 Thermostat, !- Name Floor 2 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 2 DualSPSched; !- Control 1 Name @@ -28595,6 +28654,7 @@ Floor 2 Procedure 1 Thermostat, !- Name Floor 2 Procedure 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 1 DualSPSched; !- Control 1 Name @@ -29030,6 +29090,7 @@ Floor 2 Procedure 2 Thermostat, !- Name Floor 2 Procedure 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 2 DualSPSched; !- Control 1 Name @@ -29481,6 +29542,7 @@ Floor 2 Reception Thermostat, !- Name Floor 2 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception DualSPSched; !- Control 1 Name @@ -29932,6 +29994,7 @@ Floor 2 Restroom 1 Thermostat, !- Name Floor 2 Restroom 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 1 DualSPSched; !- Control 1 Name @@ -30403,6 +30466,7 @@ Floor 2 Restroom 2 Thermostat, !- Name Floor 2 Restroom 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 2 DualSPSched; !- Control 1 Name @@ -30802,6 +30866,7 @@ Floor 2 Soil 1 Thermostat, !- Name Floor 2 Soil 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 1 DualSPSched; !- Control 1 Name @@ -31201,6 +31266,7 @@ Floor 2 Soil 2 Thermostat, !- Name Floor 2 Soil 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 2 DualSPSched; !- Control 1 Name @@ -31648,6 +31714,7 @@ Floor 2 Sterilizing Thermostat, !- Name Floor 2 Sterilizing, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Sterilizing DualSPSched; !- Control 1 Name @@ -32038,6 +32105,7 @@ Floor 2 Storage 1 Thermostat, !- Name Floor 2 Storage 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 1 DualSPSched; !- Control 1 Name @@ -32408,6 +32476,7 @@ Floor 2 Storage 2 Thermostat, !- Name Floor 2 Storage 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 2 DualSPSched; !- Control 1 Name @@ -32843,6 +32912,7 @@ Floor 2 Trauma Thermostat, !- Name Floor 2 Trauma, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Trauma DualSPSched; !- Control 1 Name @@ -33294,6 +33364,7 @@ Floor 2 Triage Thermostat, !- Name Floor 2 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Triage DualSPSched; !- Control 1 Name @@ -33786,6 +33857,7 @@ Floor 2 Waiting Thermostat, !- Name Floor 2 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Waiting DualSPSched; !- Control 1 Name @@ -34193,6 +34265,7 @@ Floor 3 Clean Thermostat,!- Name Floor 3 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Clean DualSPSched; !- Control 1 Name @@ -34674,6 +34747,7 @@ Floor 3 Elevator Thermostat, !- Name Floor 3 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Elevator DualSPSched; !- Control 1 Name @@ -35081,6 +35155,7 @@ Floor 3 Exam Thermostat, !- Name Floor 3 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Exam DualSPSched;!- Control 1 Name @@ -35575,6 +35650,7 @@ Floor 3 ICU Thermostat, !- Name Floor 3 ICU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 ICU DualSPSched; !- Control 1 Name @@ -36060,6 +36136,7 @@ Floor 3 Nurse Station 1 Thermostat, !- Name Floor 3 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -36554,6 +36631,7 @@ Floor 3 Nurse Station 2 Thermostat, !- Name Floor 3 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -37005,6 +37083,7 @@ Floor 3 Nursery Thermostat, !- Name Floor 3 Nursery, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nursery DualSPSched; !- Control 1 Name @@ -37456,6 +37535,7 @@ Floor 3 Office Thermostat, !- Name Floor 3 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office DualSPSched; !- Control 1 Name @@ -37935,6 +38015,7 @@ Floor 3 Operating Thermostat, !- Name Floor 3 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Operating DualSPSched; !- Control 1 Name @@ -38401,6 +38482,7 @@ Floor 3 Patient 1 Thermostat, !- Name Floor 3 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 1 DualSPSched; !- Control 1 Name @@ -38867,6 +38949,7 @@ Floor 3 Patient 2 Thermostat, !- Name Floor 3 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 2 DualSPSched; !- Control 1 Name @@ -39350,6 +39433,7 @@ Floor 3 Patient 3 Thermostat, !- Name Floor 3 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 3 DualSPSched; !- Control 1 Name @@ -39816,6 +39900,7 @@ Floor 3 Patient 4 Thermostat, !- Name Floor 3 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 4 DualSPSched; !- Control 1 Name @@ -40245,6 +40330,7 @@ Floor 3 Patient Corridor 1 Thermostat, !- Name Floor 3 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -40674,6 +40760,7 @@ Floor 3 Patient Corridor 2 Thermostat, !- Name Floor 3 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -41153,6 +41240,7 @@ Floor 3 Procedure Thermostat, !- Name Floor 3 Procedure, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Procedure DualSPSched; !- Control 1 Name @@ -41532,6 +41620,7 @@ Floor 3 Soil Thermostat, !- Name Floor 3 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Soil DualSPSched;!- Control 1 Name @@ -41966,6 +42055,7 @@ Floor 3 Supply Thermostat, !- Name Floor 3 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Supply DualSPSched; !- Control 1 Name @@ -42417,6 +42507,7 @@ Floor 3 Triage Thermostat, !- Name Floor 3 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Triage DualSPSched; !- Control 1 Name @@ -42894,6 +42985,7 @@ Floor 3 Waiting Thermostat, !- Name Floor 3 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Waiting DualSPSched; !- Control 1 Name @@ -43301,6 +43393,7 @@ Floor 4-6 Clean Thermostat, !- Name Floor 4-6 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Clean DualSPSched; !- Control 1 Name @@ -43782,6 +43875,7 @@ Floor 4-6 Elevator Thermostat, !- Name Floor 4-6 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Elevator DualSPSched; !- Control 1 Name @@ -44261,6 +44355,7 @@ Floor 4-6 Nurse Station Thermostat, !- Name Floor 4-6 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Nurse Station DualSPSched; !- Control 1 Name @@ -44712,6 +44807,7 @@ Floor 4-6 Office Thermostat, !- Name Floor 4-6 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Office DualSPSched; !- Control 1 Name @@ -45178,6 +45274,7 @@ Floor 4-6 Patient 1 Thermostat, !- Name Floor 4-6 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 1 DualSPSched; !- Control 1 Name @@ -45644,6 +45741,7 @@ Floor 4-6 Patient 2 Thermostat, !- Name Floor 4-6 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 2 DualSPSched; !- Control 1 Name @@ -46110,6 +46208,7 @@ Floor 4-6 Patient 3 Thermostat, !- Name Floor 4-6 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 3 DualSPSched; !- Control 1 Name @@ -46576,6 +46675,7 @@ Floor 4-6 Patient 4 Thermostat, !- Name Floor 4-6 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 4 DualSPSched; !- Control 1 Name @@ -47005,6 +47105,7 @@ Floor 4-6 Patient Corridor 1 Thermostat, !- Name Floor 4-6 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -47434,6 +47535,7 @@ Floor 4-6 Patient Corridor 2 Thermostat, !- Name Floor 4-6 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -47813,6 +47915,7 @@ Floor 4-6 Soil Thermostat, !- Name Floor 4-6 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Soil DualSPSched; !- Control 1 Name @@ -48247,6 +48350,7 @@ Floor 4-6 Supply Thermostat, !- Name Floor 4-6 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Supply DualSPSched; !- Control 1 Name @@ -48654,6 +48758,7 @@ Floor 7 Clean Thermostat,!- Name Floor 7 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Clean DualSPSched; !- Control 1 Name @@ -49135,6 +49240,7 @@ Floor 7 Elevator Thermostat, !- Name Floor 7 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Elevator DualSPSched; !- Control 1 Name @@ -49614,6 +49720,7 @@ Floor 7 Nurse Station Thermostat, !- Name Floor 7 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Nurse Station DualSPSched; !- Control 1 Name @@ -50065,6 +50172,7 @@ Floor 7 Office Thermostat, !- Name Floor 7 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Office DualSPSched; !- Control 1 Name @@ -50531,6 +50639,7 @@ Floor 7 Patient 1 Thermostat, !- Name Floor 7 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 1 DualSPSched; !- Control 1 Name @@ -50997,6 +51106,7 @@ Floor 7 Patient 2 Thermostat, !- Name Floor 7 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 2 DualSPSched; !- Control 1 Name @@ -51463,6 +51573,7 @@ Floor 7 Patient 3 Thermostat, !- Name Floor 7 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 3 DualSPSched; !- Control 1 Name @@ -51929,6 +52040,7 @@ Floor 7 Patient 4 Thermostat, !- Name Floor 7 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 4 DualSPSched; !- Control 1 Name @@ -52358,6 +52470,7 @@ Floor 7 Patient Corridor 1 Thermostat, !- Name Floor 7 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -52787,6 +52900,7 @@ Floor 7 Patient Corridor 2 Thermostat, !- Name Floor 7 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -53166,6 +53280,7 @@ Floor 7 Soil Thermostat, !- Name Floor 7 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Soil DualSPSched;!- Control 1 Name @@ -53600,6 +53715,7 @@ Floor 7 Supply Thermostat, !- Name Floor 7 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Supply DualSPSched; !- Control 1 Name @@ -54007,6 +54123,7 @@ MOB Floor 1 Core Thermostat, !- Name MOB Floor 1 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Core DualSPSched; !- Control 1 Name @@ -54458,6 +54575,7 @@ MOB Floor 1 Perimeter 1 Thermostat, !- Name MOB Floor 1 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 1 DualSPSched; !- Control 1 Name @@ -54909,6 +55027,7 @@ MOB Floor 1 Perimeter 2 Thermostat, !- Name MOB Floor 1 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 2 DualSPSched; !- Control 1 Name @@ -55360,6 +55479,7 @@ MOB Floor 1 Perimeter 3 Thermostat, !- Name MOB Floor 1 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 3 DualSPSched; !- Control 1 Name @@ -55767,6 +55887,7 @@ MOB Floor 2-4 Core Thermostat, !- Name MOB Floor 2-4 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Core DualSPSched; !- Control 1 Name @@ -56218,6 +56339,7 @@ MOB Floor 2-4 Perimeter 1 Thermostat, !- Name MOB Floor 2-4 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 1 DualSPSched; !- Control 1 Name @@ -56669,6 +56791,7 @@ MOB Floor 2-4 Perimeter 2 Thermostat, !- Name MOB Floor 2-4 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 2 DualSPSched; !- Control 1 Name @@ -57120,6 +57243,7 @@ MOB Floor 2-4 Perimeter 3 Thermostat, !- Name MOB Floor 2-4 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 3 DualSPSched; !- Control 1 Name @@ -57571,6 +57695,7 @@ MOB Floor 2-4 Perimeter 4 Thermostat, !- Name MOB Floor 2-4 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 4 DualSPSched; !- Control 1 Name @@ -57978,6 +58103,7 @@ MOB Floor 5 Core Thermostat, !- Name MOB Floor 5 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Core DualSPSched; !- Control 1 Name @@ -58429,6 +58555,7 @@ MOB Floor 5 Perimeter 1 Thermostat, !- Name MOB Floor 5 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 1 DualSPSched; !- Control 1 Name @@ -58880,6 +59007,7 @@ MOB Floor 5 Perimeter 2 Thermostat, !- Name MOB Floor 5 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 2 DualSPSched; !- Control 1 Name @@ -59331,6 +59459,7 @@ MOB Floor 5 Perimeter 3 Thermostat, !- Name MOB Floor 5 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 3 DualSPSched; !- Control 1 Name @@ -59804,6 +59933,7 @@ MOB Floor 5 Perimeter 4 Thermostat, !- Name MOB Floor 5 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 4 DualSPSched; !- Control 1 Name diff --git a/testfiles/HospitalLowEnergy.idf b/testfiles/HospitalLowEnergy.idf index f91ad969769..e362641f664 100644 --- a/testfiles/HospitalLowEnergy.idf +++ b/testfiles/HospitalLowEnergy.idf @@ -1930,6 +1930,7 @@ Floor 1 Cafe Thermostat, !- Name Floor 1 Cafe, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Cafe DualSPSched;!- Control 1 Name @@ -2878,6 +2879,7 @@ Floor 1 Clean Thermostat,!- Name Floor 1 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Clean DualSPSched; !- Control 1 Name @@ -3499,6 +3501,7 @@ Floor 1 Conference Thermostat, !- Name Floor 1 Conference, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Conference DualSPSched; !- Control 1 Name @@ -4078,6 +4081,7 @@ Floor 1 Dining Thermostat, !- Name Floor 1 Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Dining DualSPSched; !- Control 1 Name @@ -4682,6 +4686,7 @@ Floor 1 Elevator Thermostat, !- Name Floor 1 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Elevator DualSPSched; !- Control 1 Name @@ -5221,6 +5226,7 @@ Floor 1 Exam Thermostat, !- Name Floor 1 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Exam DualSPSched;!- Control 1 Name @@ -5773,6 +5779,7 @@ Floor 1 Food Storage Thermostat, !- Name Floor 1 Food Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Food Storage DualSPSched; !- Control 1 Name @@ -6453,6 +6460,7 @@ Floor 1 Gas Storage Thermostat, !- Name Floor 1 Gas Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Gas Storage DualSPSched; !- Control 1 Name @@ -6993,6 +7001,7 @@ Floor 1 Imaging Thermostat, !- Name Floor 1 Imaging, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Imaging DualSPSched; !- Control 1 Name @@ -7545,6 +7554,7 @@ Floor 1 Kitchen Thermostat, !- Name Floor 1 Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Kitchen DualSPSched; !- Control 1 Name @@ -8119,6 +8129,7 @@ Floor 1 Lab 1 Thermostat,!- Name Floor 1 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 1 DualSPSched; !- Control 1 Name @@ -8686,6 +8697,7 @@ Floor 1 Lab 2 Thermostat,!- Name Floor 1 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lab 2 DualSPSched; !- Control 1 Name @@ -9294,6 +9306,7 @@ Floor 1 Laundry Thermostat, !- Name Floor 1 Laundry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Laundry DualSPSched; !- Control 1 Name @@ -9924,6 +9937,7 @@ Floor 1 Lobby Thermostat,!- Name Floor 1 Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lobby DualSPSched; !- Control 1 Name @@ -10419,6 +10433,7 @@ Floor 1 Lounge Thermostat, !- Name Floor 1 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Lounge DualSPSched; !- Control 1 Name @@ -10936,6 +10951,7 @@ Floor 1 Mech 1 Thermostat, !- Name Floor 1 Mech 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 1 DualSPSched; !- Control 1 Name @@ -11502,6 +11518,7 @@ Floor 1 Mech 2 Thermostat, !- Name Floor 1 Mech 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Mech 2 DualSPSched; !- Control 1 Name @@ -12081,6 +12098,7 @@ Floor 1 Office 1 Thermostat, !- Name Floor 1 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 1 DualSPSched; !- Control 1 Name @@ -12660,6 +12678,7 @@ Floor 1 Office 2 Thermostat, !- Name Floor 1 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 2 DualSPSched; !- Control 1 Name @@ -13256,6 +13275,7 @@ Floor 1 Office 3 Thermostat, !- Name Floor 1 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 DualSPSched; !- Control 1 Name @@ -13835,6 +13855,7 @@ Floor 1 Office 3 Perimeter 1 Thermostat, !- Name Floor 1 Office 3 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 1 DualSPSched; !- Control 1 Name @@ -14414,6 +14435,7 @@ Floor 1 Office 3 Perimeter 2 Thermostat, !- Name Floor 1 Office 3 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 2 DualSPSched; !- Control 1 Name @@ -15033,6 +15055,7 @@ Floor 1 Office 3 Perimeter 3 Thermostat, !- Name Floor 1 Office 3 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Office 3 Perimeter 3 DualSPSched; !- Control 1 Name @@ -15572,6 +15595,7 @@ Floor 1 Patient Thermostat, !- Name Floor 1 Patient, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Patient DualSPSched; !- Control 1 Name @@ -16067,6 +16091,7 @@ Floor 1 Pharmacy Thermostat, !- Name Floor 1 Pharmacy, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Pharmacy DualSPSched; !- Control 1 Name @@ -16562,6 +16587,7 @@ Floor 1 Physical Therapy Thermostat, !- Name Floor 1 Physical Therapy,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Physical Therapy DualSPSched; !- Control 1 Name @@ -17079,6 +17105,7 @@ Floor 1 Receiving Thermostat, !- Name Floor 1 Receiving, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Receiving DualSPSched; !- Control 1 Name @@ -17658,6 +17685,7 @@ Floor 1 Reception Thermostat, !- Name Floor 1 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Reception DualSPSched; !- Control 1 Name @@ -18125,6 +18153,7 @@ Floor 1 Soil Thermostat, !- Name Floor 1 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Soil DualSPSched;!- Control 1 Name @@ -18600,6 +18629,7 @@ Floor 1 Storage Thermostat, !- Name Floor 1 Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Storage DualSPSched; !- Control 1 Name @@ -19095,6 +19125,7 @@ Floor 1 Waiting Thermostat, !- Name Floor 1 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 1 Waiting DualSPSched; !- Control 1 Name @@ -19674,6 +19705,7 @@ Floor 2 Chapel Thermostat, !- Name Floor 2 Chapel, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Chapel DualSPSched; !- Control 1 Name @@ -20169,6 +20201,7 @@ Floor 2 Clean 1 Thermostat, !- Name Floor 2 Clean 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 1 DualSPSched; !- Control 1 Name @@ -20664,6 +20697,7 @@ Floor 2 Clean 2 Thermostat, !- Name Floor 2 Clean 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Clean 2 DualSPSched; !- Control 1 Name @@ -21223,6 +21257,7 @@ Floor 2 Corridor Thermostat, !- Name Floor 2 Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Corridor DualSPSched; !- Control 1 Name @@ -21827,6 +21862,7 @@ Floor 2 Elevator Thermostat, !- Name Floor 2 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Elevator DualSPSched; !- Control 1 Name @@ -22406,6 +22442,7 @@ Floor 2 Exam 1 Thermostat, !- Name Floor 2 Exam 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 1 DualSPSched; !- Control 1 Name @@ -22901,6 +22938,7 @@ Floor 2 Exam 2 Thermostat, !- Name Floor 2 Exam 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 2 DualSPSched; !- Control 1 Name @@ -23396,6 +23434,7 @@ Floor 2 Exam 3 Thermostat, !- Name Floor 2 Exam 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 3 DualSPSched; !- Control 1 Name @@ -23908,6 +23947,7 @@ Floor 2 Exam 4 Thermostat, !- Name Floor 2 Exam 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Exam 4 DualSPSched; !- Control 1 Name @@ -24472,6 +24512,7 @@ Floor 2 Gift Shop Thermostat, !- Name Floor 2 Gift Shop, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Gift Shop DualSPSched; !- Control 1 Name @@ -24995,6 +25036,7 @@ Floor 2 Imaging 1 Thermostat, !- Name Floor 2 Imaging 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 1 DualSPSched; !- Control 1 Name @@ -25604,6 +25646,7 @@ Floor 2 Imaging 2 Thermostat, !- Name Floor 2 Imaging 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 2 DualSPSched; !- Control 1 Name @@ -26186,6 +26229,7 @@ Floor 2 Imaging 3 Thermostat, !- Name Floor 2 Imaging 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Imaging 3 DualSPSched; !- Control 1 Name @@ -26709,6 +26753,7 @@ Floor 2 Lab 1 Thermostat,!- Name Floor 2 Lab 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 1 DualSPSched; !- Control 1 Name @@ -27255,6 +27300,7 @@ Floor 2 Lab 2 Thermostat,!- Name Floor 2 Lab 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lab 2 DualSPSched; !- Control 1 Name @@ -27750,6 +27796,7 @@ Floor 2 Lockers Thermostat, !- Name Floor 2 Lockers, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lockers DualSPSched; !- Control 1 Name @@ -28262,6 +28309,7 @@ Floor 2 Lounge 1 Thermostat, !- Name Floor 2 Lounge 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 1 DualSPSched; !- Control 1 Name @@ -28881,6 +28929,7 @@ Floor 2 Lounge 2 Thermostat, !- Name Floor 2 Lounge 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Lounge 2 DualSPSched; !- Control 1 Name @@ -29404,6 +29453,7 @@ Floor 2 Nurse Station 1 Thermostat, !- Name Floor 2 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -30028,6 +30078,7 @@ Floor 2 Nurse Station 2 Thermostat, !- Name Floor 2 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -30523,6 +30574,7 @@ Floor 2 Office 1 Thermostat, !- Name Floor 2 Office 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 1 DualSPSched; !- Control 1 Name @@ -31102,6 +31154,7 @@ Floor 2 Office 2 Thermostat, !- Name Floor 2 Office 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 2 DualSPSched; !- Control 1 Name @@ -31597,6 +31650,7 @@ Floor 2 Office 3 Thermostat, !- Name Floor 2 Office 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 3 DualSPSched; !- Control 1 Name @@ -32216,6 +32270,7 @@ Floor 2 Office 4 Thermostat, !- Name Floor 2 Office 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Office 4 DualSPSched; !- Control 1 Name @@ -32847,6 +32902,7 @@ Floor 2 Operating Thermostat, !- Name Floor 2 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Operating DualSPSched; !- Control 1 Name @@ -33349,6 +33405,7 @@ Floor 2 PACU Thermostat, !- Name Floor 2 PACU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 PACU DualSPSched;!- Control 1 Name @@ -33888,6 +33945,7 @@ Floor 2 Patient 1 Thermostat, !- Name Floor 2 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 1 DualSPSched; !- Control 1 Name @@ -34383,6 +34441,7 @@ Floor 2 Patient 2 Thermostat, !- Name Floor 2 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Patient 2 DualSPSched; !- Control 1 Name @@ -34906,6 +34965,7 @@ Floor 2 Procedure 1 Thermostat, !- Name Floor 2 Procedure 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 1 DualSPSched; !- Control 1 Name @@ -35429,6 +35489,7 @@ Floor 2 Procedure 2 Thermostat, !- Name Floor 2 Procedure 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Procedure 2 DualSPSched; !- Control 1 Name @@ -36033,6 +36094,7 @@ Floor 2 Reception Thermostat, !- Name Floor 2 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Reception DualSPSched; !- Control 1 Name @@ -36572,6 +36634,7 @@ Floor 2 Restroom 1 Thermostat, !- Name Floor 2 Restroom 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 1 DualSPSched; !- Control 1 Name @@ -37153,6 +37216,7 @@ Floor 2 Restroom 2 Thermostat, !- Name Floor 2 Restroom 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Restroom 2 DualSPSched; !- Control 1 Name @@ -37637,6 +37701,7 @@ Floor 2 Soil 1 Thermostat, !- Name Floor 2 Soil 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 1 DualSPSched; !- Control 1 Name @@ -38121,6 +38186,7 @@ Floor 2 Soil 2 Thermostat, !- Name Floor 2 Soil 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Soil 2 DualSPSched; !- Control 1 Name @@ -38653,6 +38719,7 @@ Floor 2 Sterilizing Thermostat, !- Name Floor 2 Sterilizing, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Sterilizing DualSPSched; !- Control 1 Name @@ -39128,6 +39195,7 @@ Floor 2 Storage 1 Thermostat, !- Name Floor 2 Storage 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 1 DualSPSched; !- Control 1 Name @@ -39586,6 +39654,7 @@ Floor 2 Storage 2 Thermostat, !- Name Floor 2 Storage 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Storage 2 DualSPSched; !- Control 1 Name @@ -40109,6 +40178,7 @@ Floor 2 Trauma Thermostat, !- Name Floor 2 Trauma, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Trauma DualSPSched; !- Control 1 Name @@ -40673,6 +40743,7 @@ Floor 2 Triage Thermostat, !- Name Floor 2 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Triage DualSPSched; !- Control 1 Name @@ -41290,6 +41361,7 @@ Floor 2 Waiting Thermostat, !- Name Floor 2 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 2 Waiting DualSPSched; !- Control 1 Name @@ -41785,6 +41857,7 @@ Floor 3 Clean Thermostat,!- Name Floor 3 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Clean DualSPSched; !- Control 1 Name @@ -42419,6 +42492,7 @@ Floor 3 Elevator Thermostat, !- Name Floor 3 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Elevator DualSPSched; !- Control 1 Name @@ -42914,6 +42988,7 @@ Floor 3 Exam Thermostat, !- Name Floor 3 Exam, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Exam DualSPSched;!- Control 1 Name @@ -43496,6 +43571,7 @@ Floor 3 ICU Thermostat, !- Name Floor 3 ICU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 ICU DualSPSched; !- Control 1 Name @@ -44109,6 +44185,7 @@ Floor 3 Nurse Station 1 Thermostat, !- Name Floor 3 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 1 DualSPSched; !- Control 1 Name @@ -44731,6 +44808,7 @@ Floor 3 Nurse Station 2 Thermostat, !- Name Floor 3 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nurse Station 2 DualSPSched; !- Control 1 Name @@ -45270,6 +45348,7 @@ Floor 3 Nursery Thermostat, !- Name Floor 3 Nursery, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Nursery DualSPSched; !- Control 1 Name @@ -45849,6 +45928,7 @@ Floor 3 Office Thermostat, !- Name Floor 3 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Office DualSPSched; !- Control 1 Name @@ -46416,6 +46496,7 @@ Floor 3 Operating Thermostat, !- Name Floor 3 Operating, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Operating DualSPSched; !- Control 1 Name @@ -46907,6 +46988,7 @@ Floor 3 Patient 1 Thermostat, !- Name Floor 3 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 1 DualSPSched; !- Control 1 Name @@ -47461,6 +47543,7 @@ Floor 3 Patient 2 Thermostat, !- Name Floor 3 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 2 DualSPSched; !- Control 1 Name @@ -48032,6 +48115,7 @@ Floor 3 Patient 3 Thermostat, !- Name Floor 3 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 3 DualSPSched; !- Control 1 Name @@ -48611,6 +48695,7 @@ Floor 3 Patient 4 Thermostat, !- Name Floor 3 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient 4 DualSPSched; !- Control 1 Name @@ -49168,6 +49253,7 @@ Floor 3 Patient Corridor 1 Thermostat, !- Name Floor 3 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -49725,6 +49811,7 @@ Floor 3 Patient Corridor 2 Thermostat, !- Name Floor 3 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -50292,6 +50379,7 @@ Floor 3 Procedure Thermostat, !- Name Floor 3 Procedure, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Procedure DualSPSched; !- Control 1 Name @@ -50759,6 +50847,7 @@ Floor 3 Soil Thermostat, !- Name Floor 3 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Soil DualSPSched;!- Control 1 Name @@ -51278,6 +51367,7 @@ Floor 3 Supply Thermostat, !- Name Floor 3 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Supply DualSPSched; !- Control 1 Name @@ -51817,6 +51907,7 @@ Floor 3 Triage Thermostat, !- Name Floor 3 Triage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Triage DualSPSched; !- Control 1 Name @@ -52419,6 +52510,7 @@ Floor 3 Waiting Thermostat, !- Name Floor 3 Waiting, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 3 Waiting DualSPSched; !- Control 1 Name @@ -52914,6 +53006,7 @@ Floor 4-6 Clean Thermostat, !- Name Floor 4-6 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Clean DualSPSched; !- Control 1 Name @@ -53548,6 +53641,7 @@ Floor 4-6 Elevator Thermostat, !- Name Floor 4-6 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Elevator DualSPSched; !- Control 1 Name @@ -54155,6 +54249,7 @@ Floor 4-6 Nurse Station Thermostat, !- Name Floor 4-6 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Nurse Station DualSPSched; !- Control 1 Name @@ -54734,6 +54829,7 @@ Floor 4-6 Office Thermostat, !- Name Floor 4-6 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Office DualSPSched; !- Control 1 Name @@ -55313,6 +55409,7 @@ Floor 4-6 Patient 1 Thermostat, !- Name Floor 4-6 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 1 DualSPSched; !- Control 1 Name @@ -55867,6 +55964,7 @@ Floor 4-6 Patient 2 Thermostat, !- Name Floor 4-6 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 2 DualSPSched; !- Control 1 Name @@ -56421,6 +56519,7 @@ Floor 4-6 Patient 3 Thermostat, !- Name Floor 4-6 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 3 DualSPSched; !- Control 1 Name @@ -57000,6 +57099,7 @@ Floor 4-6 Patient 4 Thermostat, !- Name Floor 4-6 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient 4 DualSPSched; !- Control 1 Name @@ -57557,6 +57657,7 @@ Floor 4-6 Patient Corridor 1 Thermostat, !- Name Floor 4-6 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -58114,6 +58215,7 @@ Floor 4-6 Patient Corridor 2 Thermostat, !- Name Floor 4-6 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -58581,6 +58683,7 @@ Floor 4-6 Soil Thermostat, !- Name Floor 4-6 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Soil DualSPSched; !- Control 1 Name @@ -59100,6 +59203,7 @@ Floor 4-6 Supply Thermostat, !- Name Floor 4-6 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 4-6 Supply DualSPSched; !- Control 1 Name @@ -59595,6 +59699,7 @@ Floor 7 Clean Thermostat,!- Name Floor 7 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Clean DualSPSched; !- Control 1 Name @@ -60229,6 +60334,7 @@ Floor 7 Elevator Thermostat, !- Name Floor 7 Elevator, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Elevator DualSPSched; !- Control 1 Name @@ -60836,6 +60942,7 @@ Floor 7 Nurse Station Thermostat, !- Name Floor 7 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Nurse Station DualSPSched; !- Control 1 Name @@ -61415,6 +61522,7 @@ Floor 7 Office Thermostat, !- Name Floor 7 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Office DualSPSched; !- Control 1 Name @@ -61994,6 +62102,7 @@ Floor 7 Patient 1 Thermostat, !- Name Floor 7 Patient 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 1 DualSPSched; !- Control 1 Name @@ -62548,6 +62657,7 @@ Floor 7 Patient 2 Thermostat, !- Name Floor 7 Patient 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 2 DualSPSched; !- Control 1 Name @@ -63102,6 +63212,7 @@ Floor 7 Patient 3 Thermostat, !- Name Floor 7 Patient 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 3 DualSPSched; !- Control 1 Name @@ -63681,6 +63792,7 @@ Floor 7 Patient 4 Thermostat, !- Name Floor 7 Patient 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient 4 DualSPSched; !- Control 1 Name @@ -64238,6 +64350,7 @@ Floor 7 Patient Corridor 1 Thermostat, !- Name Floor 7 Patient Corridor 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 1 DualSPSched; !- Control 1 Name @@ -64795,6 +64908,7 @@ Floor 7 Patient Corridor 2 Thermostat, !- Name Floor 7 Patient Corridor 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Patient Corridor 2 DualSPSched; !- Control 1 Name @@ -65262,6 +65376,7 @@ Floor 7 Soil Thermostat, !- Name Floor 7 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Soil DualSPSched;!- Control 1 Name @@ -65781,6 +65896,7 @@ Floor 7 Supply Thermostat, !- Name Floor 7 Supply, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Floor 7 Supply DualSPSched; !- Control 1 Name @@ -66276,6 +66392,7 @@ MOB Floor 1 Core Thermostat, !- Name MOB Floor 1 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Core DualSPSched; !- Control 1 Name @@ -66855,6 +66972,7 @@ MOB Floor 1 Perimeter 1 Thermostat, !- Name MOB Floor 1 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 1 DualSPSched; !- Control 1 Name @@ -67459,6 +67577,7 @@ MOB Floor 1 Perimeter 2 Thermostat, !- Name MOB Floor 1 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 2 DualSPSched; !- Control 1 Name @@ -68038,6 +68157,7 @@ MOB Floor 1 Perimeter 3 Thermostat, !- Name MOB Floor 1 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 1 Perimeter 3 DualSPSched; !- Control 1 Name @@ -68533,6 +68653,7 @@ MOB Floor 2-4 Core Thermostat, !- Name MOB Floor 2-4 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Core DualSPSched; !- Control 1 Name @@ -69112,6 +69233,7 @@ MOB Floor 2-4 Perimeter 1 Thermostat, !- Name MOB Floor 2-4 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 1 DualSPSched; !- Control 1 Name @@ -69716,6 +69838,7 @@ MOB Floor 2-4 Perimeter 2 Thermostat, !- Name MOB Floor 2-4 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 2 DualSPSched; !- Control 1 Name @@ -70295,6 +70418,7 @@ MOB Floor 2-4 Perimeter 3 Thermostat, !- Name MOB Floor 2-4 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 3 DualSPSched; !- Control 1 Name @@ -70874,6 +70998,7 @@ MOB Floor 2-4 Perimeter 4 Thermostat, !- Name MOB Floor 2-4 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 2-4 Perimeter 4 DualSPSched; !- Control 1 Name @@ -71369,6 +71494,7 @@ MOB Floor 5 Core Thermostat, !- Name MOB Floor 5 Core, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Core DualSPSched; !- Control 1 Name @@ -71948,6 +72074,7 @@ MOB Floor 5 Perimeter 1 Thermostat, !- Name MOB Floor 5 Perimeter 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 1 DualSPSched; !- Control 1 Name @@ -72552,6 +72679,7 @@ MOB Floor 5 Perimeter 2 Thermostat, !- Name MOB Floor 5 Perimeter 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 2 DualSPSched; !- Control 1 Name @@ -73131,6 +73259,7 @@ MOB Floor 5 Perimeter 3 Thermostat, !- Name MOB Floor 5 Perimeter 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 3 DualSPSched; !- Control 1 Name @@ -73732,6 +73861,7 @@ MOB Floor 5 Perimeter 4 Thermostat, !- Name MOB Floor 5 Perimeter 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MOB Floor 5 Perimeter 4 DualSPSched; !- Control 1 Name diff --git a/testfiles/House-2FurnaceAC-SequentialLoad.idf b/testfiles/House-2FurnaceAC-SequentialLoad.idf index 69defc66b51..e78d84cdfc9 100644 --- a/testfiles/House-2FurnaceAC-SequentialLoad.idf +++ b/testfiles/House-2FurnaceAC-SequentialLoad.idf @@ -1131,6 +1131,7 @@ LIVING ZONE Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Tstat Dual SP Control; !- Control 1 Name diff --git a/testfiles/House-2FurnaceAC-SequentialLoadFractions.idf b/testfiles/House-2FurnaceAC-SequentialLoadFractions.idf index 4cd81d16cc6..b564d644222 100644 --- a/testfiles/House-2FurnaceAC-SequentialLoadFractions.idf +++ b/testfiles/House-2FurnaceAC-SequentialLoadFractions.idf @@ -1136,6 +1136,7 @@ LIVING ZONE Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Tstat Dual SP Control; !- Control 1 Name diff --git a/testfiles/House-2FurnaceAC-SequentialUniformPLR.idf b/testfiles/House-2FurnaceAC-SequentialUniformPLR.idf index 282a04e5217..c9740c2660f 100644 --- a/testfiles/House-2FurnaceAC-SequentialUniformPLR.idf +++ b/testfiles/House-2FurnaceAC-SequentialUniformPLR.idf @@ -1131,6 +1131,7 @@ LIVING ZONE Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Tstat Dual SP Control; !- Control 1 Name diff --git a/testfiles/House-2FurnaceAC-UniformLoad.idf b/testfiles/House-2FurnaceAC-UniformLoad.idf index 44b3ccd745a..362799548db 100644 --- a/testfiles/House-2FurnaceAC-UniformLoad.idf +++ b/testfiles/House-2FurnaceAC-UniformLoad.idf @@ -1131,6 +1131,7 @@ LIVING ZONE Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Tstat Dual SP Control; !- Control 1 Name diff --git a/testfiles/House-2FurnaceAC-UniformPLR.idf b/testfiles/House-2FurnaceAC-UniformPLR.idf index 63b1d882c6a..23f39858ee0 100644 --- a/testfiles/House-2FurnaceAC-UniformPLR.idf +++ b/testfiles/House-2FurnaceAC-UniformPLR.idf @@ -1131,6 +1131,7 @@ LIVING ZONE Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Tstat Dual SP Control; !- Control 1 Name diff --git a/testfiles/HybridModel_4Zone_Solve_Infiltration_free_floating.idf b/testfiles/HybridModel_4Zone_Solve_Infiltration_free_floating.idf index 292d25fe360..4f6804b15d0 100644 --- a/testfiles/HybridModel_4Zone_Solve_Infiltration_free_floating.idf +++ b/testfiles/HybridModel_4Zone_Solve_Infiltration_free_floating.idf @@ -1436,6 +1436,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 SETPOINTS; !- Control 1 Name @@ -1443,6 +1444,7 @@ ZONE 2 CONTROLS, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 SETPOINTS; !- Control 1 Name @@ -1450,6 +1452,7 @@ ZONE 3 CONTROLS, !- Name ZONE 3, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 SETPOINTS; !- Control 1 Name @@ -1457,6 +1460,7 @@ ZONE 4 CONTROLS, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 SETPOINTS; !- Control 1 Name diff --git a/testfiles/HybridModel_4Zone_Solve_PeopleCount_with_HVAC.idf b/testfiles/HybridModel_4Zone_Solve_PeopleCount_with_HVAC.idf index 624fc868db8..6e7065ff812 100644 --- a/testfiles/HybridModel_4Zone_Solve_PeopleCount_with_HVAC.idf +++ b/testfiles/HybridModel_4Zone_Solve_PeopleCount_with_HVAC.idf @@ -1508,6 +1508,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SmallOffice - Thermostat;!- Control 1 Name @@ -1515,6 +1516,7 @@ ZONE 2 CONTROLS, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SmallOffice - Thermostat;!- Control 1 Name @@ -1522,6 +1524,7 @@ ZONE 3 CONTROLS, !- Name ZONE 3, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SmallOffice - Thermostat;!- Control 1 Name @@ -1529,6 +1532,7 @@ ZONE 4 CONTROLS, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SmallOffice - Thermostat;!- Control 1 Name diff --git a/testfiles/HybridVentilationControl.idf b/testfiles/HybridVentilationControl.idf index cbda1f9a575..f3a2a904fee 100644 --- a/testfiles/HybridVentilationControl.idf +++ b/testfiles/HybridVentilationControl.idf @@ -3141,6 +3141,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3148,6 +3149,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3155,6 +3157,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/HybridVentilationControlGlobalSimple.idf b/testfiles/HybridVentilationControlGlobalSimple.idf index 50eda43c451..6e819cfbffc 100644 --- a/testfiles/HybridVentilationControlGlobalSimple.idf +++ b/testfiles/HybridVentilationControlGlobalSimple.idf @@ -2271,6 +2271,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2278,6 +2279,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2285,6 +2287,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/HybridZoneModel.idf b/testfiles/HybridZoneModel.idf index 8ef3fc6ed77..d6f1d96ea7a 100644 --- a/testfiles/HybridZoneModel.idf +++ b/testfiles/HybridZoneModel.idf @@ -1287,6 +1287,7 @@ ZONE 1 CONTROLS, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 SETPOINTS; !- Control 1 Name @@ -1350,6 +1351,7 @@ ZONE 2 CONTROLS, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 SETPOINTS; !- Control 1 Name @@ -1413,6 +1415,7 @@ ZONE 3 CONTROLS, !- Name ZONE 3, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 SETPOINTS; !- Control 1 Name @@ -1476,6 +1479,7 @@ ZONE 4 CONTROLS, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 SETPOINTS; !- Control 1 Name diff --git a/testfiles/IceStorage-Parallel.idf b/testfiles/IceStorage-Parallel.idf index 0472e3b4439..ee7b2aabf54 100644 --- a/testfiles/IceStorage-Parallel.idf +++ b/testfiles/IceStorage-Parallel.idf @@ -1845,6 +1845,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1964,6 +1965,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2097,6 +2099,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2230,6 +2233,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2363,6 +2367,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/IceStorage-Series-ChillerDownstream.idf b/testfiles/IceStorage-Series-ChillerDownstream.idf index c440cb17f20..29c22ac41b3 100644 --- a/testfiles/IceStorage-Series-ChillerDownstream.idf +++ b/testfiles/IceStorage-Series-ChillerDownstream.idf @@ -1843,6 +1843,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1962,6 +1963,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2095,6 +2097,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2228,6 +2231,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2361,6 +2365,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/IceStorage-Series-ChillerUpstream.idf b/testfiles/IceStorage-Series-ChillerUpstream.idf index d3b0dbbb0a9..f06feeef226 100644 --- a/testfiles/IceStorage-Series-ChillerUpstream.idf +++ b/testfiles/IceStorage-Series-ChillerUpstream.idf @@ -1843,6 +1843,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1962,6 +1963,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2095,6 +2097,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2228,6 +2231,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2361,6 +2365,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/IndEvapCoolerRTUoffice.idf b/testfiles/IndEvapCoolerRTUoffice.idf index 79a86bdbfa2..55f9cae9f7d 100644 --- a/testfiles/IndEvapCoolerRTUoffice.idf +++ b/testfiles/IndEvapCoolerRTUoffice.idf @@ -4052,6 +4052,7 @@ ZN1 Thermostat, !- Name ZN1_Fl1_S_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4409,6 +4410,7 @@ ZN3 Thermostat, !- Name ZN3_Fl1_E_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4766,6 +4768,7 @@ ZN5 Thermostat, !- Name ZN5_Fl1_W_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5123,6 +5126,7 @@ ZN7 Thermostat, !- Name ZN7_fl1_N_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5480,6 +5484,7 @@ ZN9 Thermostat, !- Name ZN9_Fl1_Core_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5837,6 +5842,7 @@ ZN11 Thermostat, !- Name ZN11_Fl2_S_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6194,6 +6200,7 @@ ZN13 Thermostat, !- Name ZN13_Fl2_E_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6551,6 +6558,7 @@ ZN15 Thermostat, !- Name ZN15_Fl2_W_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6908,6 +6916,7 @@ ZN17 Thermostat, !- Name ZN17_Fl2_N_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -7265,6 +7274,7 @@ ZN19 Thermostat, !- Name ZN19_Fl2_Core_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/IndirectAbsorptionChiller.idf b/testfiles/IndirectAbsorptionChiller.idf index f7336f968d6..281fd886bfe 100644 --- a/testfiles/IndirectAbsorptionChiller.idf +++ b/testfiles/IndirectAbsorptionChiller.idf @@ -1212,6 +1212,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1221,6 +1222,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1230,6 +1232,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/IndoorLivingWall.idf b/testfiles/IndoorLivingWall.idf index ff2a4507744..2df78784954 100644 --- a/testfiles/IndoorLivingWall.idf +++ b/testfiles/IndoorLivingWall.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Constant 24 Dual SP Control; !- Control 1 Name @@ -1877,6 +1878,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Constant 24 Dual SP Control; !- Control 1 Name @@ -1884,6 +1886,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Constant 24 Dual SP Control; !- Control 1 Name @@ -1891,6 +1894,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Constant 24 Dual SP Control; !- Control 1 Name @@ -1898,6 +1902,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Constant 24 Dual SP Control; !- Control 1 Name diff --git a/testfiles/LgOffVAV.idf b/testfiles/LgOffVAV.idf index 4d3f53f4081..4ef7f596b53 100644 --- a/testfiles/LgOffVAV.idf +++ b/testfiles/LgOffVAV.idf @@ -5051,6 +5051,7 @@ P1T Thermostat, !- Name PER-1T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5058,6 +5059,7 @@ P2T Thermostat, !- Name PER-2T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5065,6 +5067,7 @@ P3T Thermostat, !- Name PER-3T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5072,6 +5075,7 @@ P4T Thermostat, !- Name PER-4T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5079,6 +5083,7 @@ C1T Thermostat, !- Name COR-T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5086,6 +5091,7 @@ P1F Thermostat, !- Name PER-1F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5093,6 +5099,7 @@ P2F Thermostat, !- Name PER-2F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5100,6 +5107,7 @@ P3F Thermostat, !- Name PER-3F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5107,6 +5115,7 @@ P4F Thermostat, !- Name PER-4F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5114,6 +5123,7 @@ C1F Thermostat, !- Name COR-F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5121,6 +5131,7 @@ P1I Thermostat, !- Name PER-1I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5128,6 +5139,7 @@ P2I Thermostat, !- Name PER-2I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5135,6 +5147,7 @@ P3I Thermostat, !- Name PER-3I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5142,6 +5155,7 @@ P4I Thermostat, !- Name PER-4I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5149,6 +5163,7 @@ C1I Thermostat, !- Name COR-I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/LgOffVAVusingBasement.idf b/testfiles/LgOffVAVusingBasement.idf index 646e7038e22..bc663aa3191 100644 --- a/testfiles/LgOffVAVusingBasement.idf +++ b/testfiles/LgOffVAVusingBasement.idf @@ -5126,6 +5126,7 @@ P1T Thermostat, !- Name PER-1T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5133,6 +5134,7 @@ P2T Thermostat, !- Name PER-2T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5140,6 +5142,7 @@ P3T Thermostat, !- Name PER-3T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5147,6 +5150,7 @@ P4T Thermostat, !- Name PER-4T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5154,6 +5158,7 @@ C1T Thermostat, !- Name COR-T, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5161,6 +5166,7 @@ P1F Thermostat, !- Name PER-1F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5168,6 +5174,7 @@ P2F Thermostat, !- Name PER-2F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5175,6 +5182,7 @@ P3F Thermostat, !- Name PER-3F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5182,6 +5190,7 @@ P4F Thermostat, !- Name PER-4F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5189,6 +5198,7 @@ C1F Thermostat, !- Name COR-F, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5196,6 +5206,7 @@ P1I Thermostat, !- Name PER-1I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5203,6 +5214,7 @@ P2I Thermostat, !- Name PER-2I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5210,6 +5222,7 @@ P3I Thermostat, !- Name PER-3I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5217,6 +5230,7 @@ P4I Thermostat, !- Name PER-4I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -5224,6 +5238,7 @@ C1I Thermostat, !- Name COR-I, !- Zone or ZoneList Name Dual Control, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/LookupTables.idf b/testfiles/LookupTables.idf index 02267760a13..2da3a48c838 100644 --- a/testfiles/LookupTables.idf +++ b/testfiles/LookupTables.idf @@ -1414,6 +1414,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1436,6 +1437,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1445,6 +1447,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/LrgOff_GridStorageDemandLeveling.idf b/testfiles/LrgOff_GridStorageDemandLeveling.idf index dfcb28a1f9c..e0186896341 100644 --- a/testfiles/LrgOff_GridStorageDemandLeveling.idf +++ b/testfiles/LrgOff_GridStorageDemandLeveling.idf @@ -6185,6 +6185,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6192,6 +6193,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6199,6 +6201,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6206,6 +6209,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6213,6 +6217,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6220,6 +6225,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6227,6 +6233,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6234,6 +6241,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6241,6 +6249,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6248,6 +6257,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6255,6 +6265,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6262,6 +6273,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6269,6 +6281,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6276,6 +6289,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6283,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6290,6 +6305,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/LrgOff_GridStorageEMSSmoothing.idf b/testfiles/LrgOff_GridStorageEMSSmoothing.idf index d4c946bc734..5c8b92da69a 100644 --- a/testfiles/LrgOff_GridStorageEMSSmoothing.idf +++ b/testfiles/LrgOff_GridStorageEMSSmoothing.idf @@ -6185,6 +6185,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6192,6 +6193,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6199,6 +6201,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6206,6 +6209,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6213,6 +6217,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6220,6 +6225,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6227,6 +6233,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6234,6 +6241,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6241,6 +6249,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6248,6 +6257,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6255,6 +6265,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6262,6 +6273,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6269,6 +6281,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6276,6 +6289,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6283,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6290,6 +6305,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/LrgOff_GridStorageScheduled.idf b/testfiles/LrgOff_GridStorageScheduled.idf index 5a182667011..a0d11061d72 100644 --- a/testfiles/LrgOff_GridStorageScheduled.idf +++ b/testfiles/LrgOff_GridStorageScheduled.idf @@ -6185,6 +6185,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6192,6 +6193,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6199,6 +6201,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6206,6 +6209,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6213,6 +6217,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6220,6 +6225,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6227,6 +6233,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6234,6 +6241,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6241,6 +6249,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6248,6 +6257,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6255,6 +6265,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6262,6 +6273,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6269,6 +6281,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6276,6 +6289,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6283,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6290,6 +6305,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/MicroCogeneration.idf b/testfiles/MicroCogeneration.idf index e856740bad7..a212afe3a2d 100644 --- a/testfiles/MicroCogeneration.idf +++ b/testfiles/MicroCogeneration.idf @@ -1237,6 +1237,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1806,6 +1807,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2374,6 +2376,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2942,6 +2945,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3495,6 +3499,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/MovableExtInsulationSimple.idf b/testfiles/MovableExtInsulationSimple.idf index c1394488248..8b4af388b47 100644 --- a/testfiles/MovableExtInsulationSimple.idf +++ b/testfiles/MovableExtInsulationSimple.idf @@ -423,6 +423,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MovableIntInsulationLights.idf b/testfiles/MovableIntInsulationLights.idf index be35f32f3e3..90cfd3060be 100644 --- a/testfiles/MovableIntInsulationLights.idf +++ b/testfiles/MovableIntInsulationLights.idf @@ -436,6 +436,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MovableIntInsulationLightsLowE.idf b/testfiles/MovableIntInsulationLightsLowE.idf index 0c15bb70e69..7c1e5f8a7ad 100644 --- a/testfiles/MovableIntInsulationLightsLowE.idf +++ b/testfiles/MovableIntInsulationLightsLowE.idf @@ -436,6 +436,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MovableIntInsulationSimple.idf b/testfiles/MovableIntInsulationSimple.idf index 6d2e7a9bdf8..1285970524e 100644 --- a/testfiles/MovableIntInsulationSimple.idf +++ b/testfiles/MovableIntInsulationSimple.idf @@ -423,6 +423,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiSpeedACFurnace.idf b/testfiles/MultiSpeedACFurnace.idf index 2923ee3dfc2..76f17a51a10 100644 --- a/testfiles/MultiSpeedACFurnace.idf +++ b/testfiles/MultiSpeedACFurnace.idf @@ -1158,6 +1158,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiSpeedHP_StagedThermostat.idf b/testfiles/MultiSpeedHP_StagedThermostat.idf index 27c488505bd..2cf051eda65 100644 --- a/testfiles/MultiSpeedHP_StagedThermostat.idf +++ b/testfiles/MultiSpeedHP_StagedThermostat.idf @@ -1176,6 +1176,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiSpeedHeatPump.idf b/testfiles/MultiSpeedHeatPump.idf index a01d53c1392..f89dbedcf9c 100644 --- a/testfiles/MultiSpeedHeatPump.idf +++ b/testfiles/MultiSpeedHeatPump.idf @@ -1151,6 +1151,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiSpeedHeatPump_DirectSolution.idf b/testfiles/MultiSpeedHeatPump_DirectSolution.idf index 8a5212009b3..10d10217452 100644 --- a/testfiles/MultiSpeedHeatPump_DirectSolution.idf +++ b/testfiles/MultiSpeedHeatPump_DirectSolution.idf @@ -1154,6 +1154,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiSpeedHeatPump_MultiSolvers.idf b/testfiles/MultiSpeedHeatPump_MultiSolvers.idf index 9794cb8763f..7584b8fc216 100644 --- a/testfiles/MultiSpeedHeatPump_MultiSolvers.idf +++ b/testfiles/MultiSpeedHeatPump_MultiSolvers.idf @@ -1155,6 +1155,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/MultiStory.idf b/testfiles/MultiStory.idf index 28c53964cde..3485f24640b 100644 --- a/testfiles/MultiStory.idf +++ b/testfiles/MultiStory.idf @@ -848,6 +848,7 @@ Gnd West Thermostat, !- Name Gnd West Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -1140,6 +1141,7 @@ Gnd Center Thermostat, !- Name Gnd Center Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -1440,6 +1442,7 @@ Gnd East Thermostat, !- Name Gnd East Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -1751,6 +1754,7 @@ Mid West Thermostat, !- Name Mid West Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -2036,6 +2040,7 @@ Mid Center Thermostat, !- Name Mid Center Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -2336,6 +2341,7 @@ Mid East Thermostat, !- Name Mid East Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -2647,6 +2653,7 @@ Top West Thermostat, !- Name Top West Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -2932,6 +2939,7 @@ Top Center Thermostat, !- Name Top Center Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name @@ -3232,6 +3240,7 @@ Top East Thermostat, !- Name Top East Zone, !- Zone or ZoneList Name Zone Control Type Sch, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Heating Cooling Setpoint;!- Control 1 Name diff --git a/testfiles/Mundt_System_Always_On.idf b/testfiles/Mundt_System_Always_On.idf index 036a1b10048..d8858b6f98d 100644 --- a/testfiles/Mundt_System_Always_On.idf +++ b/testfiles/Mundt_System_Always_On.idf @@ -2682,6 +2682,7 @@ WEST ZONE Control, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2693,6 +2694,7 @@ MID-UPP ZONE Control, !- Name MID-UPP ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2704,6 +2706,7 @@ MID-LOW ZONE Control, !- Name MID-LOW ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2715,6 +2718,7 @@ EAST ZONE Control, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/Mundt_System_On_During_the_Day.idf b/testfiles/Mundt_System_On_During_the_Day.idf index f61ccbfe00e..762e85b8f22 100644 --- a/testfiles/Mundt_System_On_During_the_Day.idf +++ b/testfiles/Mundt_System_On_During_the_Day.idf @@ -2700,6 +2700,7 @@ WEST ZONE Control, !- Name WEST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2711,6 +2712,7 @@ MID-UPP ZONE Control, !- Name MID-UPP ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2722,6 +2724,7 @@ MID-LOW ZONE Control, !- Name MID-LOW ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2733,6 +2736,7 @@ EAST ZONE Control, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/OptimalStart_RefBldgLargeOfficeNew2004_Chicago.idf b/testfiles/OptimalStart_RefBldgLargeOfficeNew2004_Chicago.idf index 1ace114114f..fcf7279137a 100644 --- a/testfiles/OptimalStart_RefBldgLargeOfficeNew2004_Chicago.idf +++ b/testfiles/OptimalStart_RefBldgLargeOfficeNew2004_Chicago.idf @@ -6219,6 +6219,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6226,6 +6227,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6233,6 +6235,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6240,6 +6243,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6247,6 +6251,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6254,6 +6259,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6261,6 +6267,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6268,6 +6275,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6275,6 +6283,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6282,6 +6291,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6289,6 +6299,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6296,6 +6307,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6303,6 +6315,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6310,6 +6323,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6317,6 +6331,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6324,6 +6339,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/OutdoorAirUnit.idf b/testfiles/OutdoorAirUnit.idf index acd25829e9a..f182bd1237c 100644 --- a/testfiles/OutdoorAirUnit.idf +++ b/testfiles/OutdoorAirUnit.idf @@ -448,6 +448,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -457,6 +458,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -466,6 +468,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -475,6 +478,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -484,6 +488,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/OutdoorAirUnitwithAirloopHVAC.idf b/testfiles/OutdoorAirUnitwithAirloopHVAC.idf index 244b93ccca6..7362ffdc421 100644 --- a/testfiles/OutdoorAirUnitwithAirloopHVAC.idf +++ b/testfiles/OutdoorAirUnitwithAirloopHVAC.idf @@ -446,6 +446,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -455,6 +456,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -464,6 +466,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -473,6 +476,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -482,6 +486,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PCMThermalStorage.idf b/testfiles/PCMThermalStorage.idf index 08b03200a61..85ff2aabbc2 100644 --- a/testfiles/PCMThermalStorage.idf +++ b/testfiles/PCMThermalStorage.idf @@ -1243,6 +1243,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1812,6 +1813,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2380,6 +2382,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2948,6 +2951,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -3501,6 +3505,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/PIUAuto.idf b/testfiles/PIUAuto.idf index d52930d87a7..29f1383d55f 100644 --- a/testfiles/PIUAuto.idf +++ b/testfiles/PIUAuto.idf @@ -2135,6 +2135,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2142,6 +2143,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2149,6 +2151,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/PackagedTerminalAirConditioner.idf b/testfiles/PackagedTerminalAirConditioner.idf index df1c0da4716..ca4fa0a2120 100644 --- a/testfiles/PackagedTerminalAirConditioner.idf +++ b/testfiles/PackagedTerminalAirConditioner.idf @@ -1448,6 +1448,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1470,6 +1471,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1479,6 +1481,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PackagedTerminalAirConditionerVSAS.idf b/testfiles/PackagedTerminalAirConditionerVSAS.idf index 0d050f023f2..aa896500952 100644 --- a/testfiles/PackagedTerminalAirConditionerVSAS.idf +++ b/testfiles/PackagedTerminalAirConditionerVSAS.idf @@ -1965,6 +1965,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1987,6 +1988,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1996,6 +1998,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PackagedTerminalHeatPump.idf b/testfiles/PackagedTerminalHeatPump.idf index 931ba8be5c0..6c06d06e138 100644 --- a/testfiles/PackagedTerminalHeatPump.idf +++ b/testfiles/PackagedTerminalHeatPump.idf @@ -1414,6 +1414,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1436,6 +1437,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1445,6 +1447,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PackagedTerminalHeatPumpVSAS.idf b/testfiles/PackagedTerminalHeatPumpVSAS.idf index adf5675c587..9ff1ee9e5cd 100644 --- a/testfiles/PackagedTerminalHeatPumpVSAS.idf +++ b/testfiles/PackagedTerminalHeatPumpVSAS.idf @@ -2325,6 +2325,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2347,6 +2348,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2356,6 +2358,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PackagedTerminalHeatPump_LatentSizing_SensibleAndLatent.idf b/testfiles/PackagedTerminalHeatPump_LatentSizing_SensibleAndLatent.idf index 73f4268a0a9..18ab30a4a67 100644 --- a/testfiles/PackagedTerminalHeatPump_LatentSizing_SensibleAndLatent.idf +++ b/testfiles/PackagedTerminalHeatPump_LatentSizing_SensibleAndLatent.idf @@ -1434,6 +1434,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1441,6 +1442,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1448,6 +1450,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/ParametricInsulation-5ZoneAirCooled.idf b/testfiles/ParametricInsulation-5ZoneAirCooled.idf index 7355f481800..396d9400b84 100644 --- a/testfiles/ParametricInsulation-5ZoneAirCooled.idf +++ b/testfiles/ParametricInsulation-5ZoneAirCooled.idf @@ -2271,6 +2271,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2282,6 +2283,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2293,6 +2295,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2304,6 +2307,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2315,6 +2319,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PerformancePrecision_ASHRAE9012016_SchoolSecondary_Denver.idf b/testfiles/PerformancePrecision_ASHRAE9012016_SchoolSecondary_Denver.idf index 3c9e49cecea..cc1e579de98 100644 --- a/testfiles/PerformancePrecision_ASHRAE9012016_SchoolSecondary_Denver.idf +++ b/testfiles/PerformancePrecision_ASHRAE9012016_SchoolSecondary_Denver.idf @@ -20734,6 +20734,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20741,6 +20742,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20748,6 +20750,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20755,6 +20758,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20762,6 +20766,7 @@ Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20769,6 +20774,7 @@ Corridor_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20776,6 +20782,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20783,6 +20790,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20790,6 +20798,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20797,6 +20806,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20804,6 +20814,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20811,6 +20822,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20818,6 +20830,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20825,6 +20838,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20832,6 +20846,7 @@ Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20839,6 +20854,7 @@ Corridor_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20846,6 +20862,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20853,6 +20870,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20860,6 +20878,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20867,6 +20886,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20874,6 +20894,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20881,6 +20902,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20888,6 +20910,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20895,6 +20918,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20902,6 +20926,7 @@ Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20909,6 +20934,7 @@ Corridor_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20916,6 +20942,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20923,6 +20950,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20930,6 +20958,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20937,6 +20966,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20944,6 +20974,7 @@ Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20951,6 +20982,7 @@ Main_Corridor_ZN_1_FLR_2 Thermostat, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20958,6 +20990,7 @@ Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20965,6 +20998,7 @@ Lobby_ZN_1_FLR_2 Thermostat, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20972,6 +21006,7 @@ Bathrooms_ZN_1_FLR_1 Thermostat, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20979,6 +21014,7 @@ Bathrooms_ZN_1_FLR_2 Thermostat, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -20986,6 +21022,7 @@ Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -20993,6 +21030,7 @@ Offices_ZN_1_FLR_2 Thermostat, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -21000,6 +21038,7 @@ Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21007,6 +21046,7 @@ Aux_Gym_ZN_1_FLR_1 Thermostat, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Aux_Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21014,6 +21054,7 @@ Auditorium_ZN_1_FLR_1 Thermostat, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Auditorium_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21021,6 +21062,7 @@ Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21028,6 +21070,7 @@ LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Thermostat, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -21035,6 +21078,7 @@ Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21042,6 +21086,7 @@ Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -21049,6 +21094,7 @@ Mech_ZN_1_FLR_2 Thermostat, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/PipeHeatTransfer_Outair.idf b/testfiles/PipeHeatTransfer_Outair.idf index a859b82c43e..55feda4cef5 100644 --- a/testfiles/PipeHeatTransfer_Outair.idf +++ b/testfiles/PipeHeatTransfer_Outair.idf @@ -2583,6 +2583,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2594,6 +2595,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2605,6 +2607,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2616,6 +2619,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2627,6 +2631,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PipeHeatTransfer_Schedule.idf b/testfiles/PipeHeatTransfer_Schedule.idf index eac8f9a48b2..25807f23243 100644 --- a/testfiles/PipeHeatTransfer_Schedule.idf +++ b/testfiles/PipeHeatTransfer_Schedule.idf @@ -2583,6 +2583,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2594,6 +2595,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2605,6 +2607,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2616,6 +2619,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2627,6 +2631,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PipeHeatTransfer_Underground.idf b/testfiles/PipeHeatTransfer_Underground.idf index 58f07c30ab1..9f9dacd691b 100644 --- a/testfiles/PipeHeatTransfer_Underground.idf +++ b/testfiles/PipeHeatTransfer_Underground.idf @@ -2578,6 +2578,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2589,6 +2590,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2600,6 +2602,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2611,6 +2614,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2622,6 +2626,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PipeHeatTransfer_Zone.idf b/testfiles/PipeHeatTransfer_Zone.idf index 4a0b4c89929..fda2906b839 100644 --- a/testfiles/PipeHeatTransfer_Zone.idf +++ b/testfiles/PipeHeatTransfer_Zone.idf @@ -2583,6 +2583,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2594,6 +2595,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2605,6 +2607,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2616,6 +2619,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2627,6 +2631,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PipingSystem_Underground_FHX.idf b/testfiles/PipingSystem_Underground_FHX.idf index db3a088465d..89a13c88887 100644 --- a/testfiles/PipingSystem_Underground_FHX.idf +++ b/testfiles/PipingSystem_Underground_FHX.idf @@ -293,6 +293,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement Dual SP Control;!- Control 1 Name @@ -305,6 +306,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main Floor Dual SP Control; !- Control 1 Name diff --git a/testfiles/PlantApplicationsGuide_Example2.idf b/testfiles/PlantApplicationsGuide_Example2.idf index 9b21c31b305..590a9341eea 100644 --- a/testfiles/PlantApplicationsGuide_Example2.idf +++ b/testfiles/PlantApplicationsGuide_Example2.idf @@ -2708,6 +2708,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -3202,6 +3203,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3677,6 +3679,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4171,6 +4174,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4751,6 +4755,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/PlantApplicationsGuide_Example2_hwTank.idf b/testfiles/PlantApplicationsGuide_Example2_hwTank.idf index 8638a6af6e6..dc350c2c95c 100644 --- a/testfiles/PlantApplicationsGuide_Example2_hwTank.idf +++ b/testfiles/PlantApplicationsGuide_Example2_hwTank.idf @@ -2741,6 +2741,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -3235,6 +3236,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -3710,6 +3712,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -4204,6 +4207,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -4784,6 +4788,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/PlantApplicationsGuide_Example3.idf b/testfiles/PlantApplicationsGuide_Example3.idf index 914e828b424..61bc7c4aa65 100644 --- a/testfiles/PlantApplicationsGuide_Example3.idf +++ b/testfiles/PlantApplicationsGuide_Example3.idf @@ -2307,6 +2307,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2316,6 +2317,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2325,6 +2327,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PlantLoopHeatPump_EIR_AirSource_Hospital_wSixPipeHeatRecovery.idf b/testfiles/PlantLoopHeatPump_EIR_AirSource_Hospital_wSixPipeHeatRecovery.idf index 68ca9b40b66..065dafadd41 100644 --- a/testfiles/PlantLoopHeatPump_EIR_AirSource_Hospital_wSixPipeHeatRecovery.idf +++ b/testfiles/PlantLoopHeatPump_EIR_AirSource_Hospital_wSixPipeHeatRecovery.idf @@ -18528,6 +18528,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -18535,6 +18536,7 @@ Corridor_Flr_1 Thermostat, !- Name Corridor_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_1 DualSPSched; !- Control 1 Name @@ -18542,6 +18544,7 @@ Corridor_Flr_2 Thermostat, !- Name Corridor_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_2 DualSPSched; !- Control 1 Name @@ -18549,6 +18552,7 @@ Corridor_Flr_5 Thermostat, !- Name Corridor_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_5 DualSPSched; !- Control 1 Name @@ -18556,6 +18560,7 @@ Corridor_NW_Flr_3 Thermostat, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name @@ -18563,6 +18568,7 @@ Corridor_NW_Flr_4 Thermostat, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name @@ -18570,6 +18576,7 @@ Corridor_SE_Flr_3 Thermostat, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name @@ -18577,6 +18584,7 @@ Corridor_SE_Flr_4 Thermostat, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name @@ -18584,6 +18592,7 @@ Dining_Flr_5 Thermostat, !- Name Dining_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_5 DualSPSched;!- Control 1 Name @@ -18591,6 +18600,7 @@ ER_Exam1_Mult4_Flr_1 Thermostat, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18598,6 +18608,7 @@ ER_Exam3_Mult4_Flr_1 Thermostat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18605,6 +18616,7 @@ ER_NurseStn_Lobby_Flr_1 Thermostat, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_NurseStn_Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -18612,6 +18624,7 @@ ER_Trauma1_Flr_1 Thermostat, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma1_Flr_1 DualSPSched; !- Control 1 Name @@ -18619,6 +18632,7 @@ ER_Trauma2_Flr_1 Thermostat, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma2_Flr_1 DualSPSched; !- Control 1 Name @@ -18626,6 +18640,7 @@ ER_Triage_Mult4_Flr_1 Thermostat, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Triage_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18633,6 +18648,7 @@ ICU_Flr_2 Thermostat, !- Name ICU_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_Flr_2 DualSPSched; !- Control 1 Name @@ -18640,6 +18656,7 @@ ICU_NurseStn_Lobby_Flr_2 Thermostat, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18647,6 +18664,7 @@ IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18654,6 +18672,7 @@ IC_PatRoom2_Flr_2 Thermostat, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name @@ -18661,6 +18680,7 @@ IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name @@ -18668,6 +18688,7 @@ Kitchen_Flr_5 Thermostat,!- Name Kitchen_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_5 DualSPSched; !- Control 1 Name @@ -18675,6 +18696,7 @@ Lab_Flr_3 Thermostat, !- Name Lab_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_3 DualSPSched; !- Control 1 Name @@ -18682,6 +18704,7 @@ Lab_Flr_4 Thermostat, !- Name Lab_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_4 DualSPSched; !- Control 1 Name @@ -18689,6 +18712,7 @@ Lobby_Records_Flr_1 Thermostat, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Records_Flr_1 DualSPSched; !- Control 1 Name @@ -18696,6 +18720,7 @@ NurseStn_Lobby_Flr_3 Thermostat, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_3 DualSPSched; !- Control 1 Name @@ -18703,6 +18728,7 @@ NurseStn_Lobby_Flr_4 Thermostat, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_4 DualSPSched; !- Control 1 Name @@ -18710,6 +18736,7 @@ NurseStn_Lobby_Flr_5 Thermostat, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_5 DualSPSched; !- Control 1 Name @@ -18717,6 +18744,7 @@ OR1_Flr_2 Thermostat, !- Name OR1_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR1_Flr_2 DualSPSched; !- Control 1 Name @@ -18724,6 +18752,7 @@ OR2_Mult5_Flr_2 Thermostat, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18731,6 +18760,7 @@ OR3_Flr_2 Thermostat, !- Name OR3_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR3_Flr_2 DualSPSched; !- Control 1 Name @@ -18738,6 +18768,7 @@ OR4_Flr_2 Thermostat, !- Name OR4_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR4_Flr_2 DualSPSched; !- Control 1 Name @@ -18745,6 +18776,7 @@ OR_NurseStn_Lobby_Flr_2 Thermostat, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18752,6 +18784,7 @@ Office1_Flr_5 Thermostat,!- Name Office1_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Flr_5 DualSPSched; !- Control 1 Name @@ -18759,6 +18792,7 @@ Office1_Mult4_Flr_1 Thermostat, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18766,6 +18800,7 @@ Office2_Mult5_Flr_5 Thermostat, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name @@ -18773,6 +18808,7 @@ Office3_Flr_5 Thermostat,!- Name Office3_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office3_Flr_5 DualSPSched; !- Control 1 Name @@ -18780,6 +18816,7 @@ Office4_Mult6_Flr_5 Thermostat, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name @@ -18787,6 +18824,7 @@ PatRoom1_Mult10_Flr_3 Thermostat, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18794,6 +18832,7 @@ PatRoom1_Mult10_Flr_4 Thermostat, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18801,6 +18840,7 @@ PatRoom2_Flr_3 Thermostat, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_3 DualSPSched; !- Control 1 Name @@ -18808,6 +18848,7 @@ PatRoom2_Flr_4 Thermostat, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_4 DualSPSched; !- Control 1 Name @@ -18815,6 +18856,7 @@ PatRoom3_Mult10_Flr_3 Thermostat, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18822,6 +18864,7 @@ PatRoom3_Mult10_Flr_4 Thermostat, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18829,6 +18872,7 @@ PatRoom4_Flr_3 Thermostat, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_3 DualSPSched; !- Control 1 Name @@ -18836,6 +18880,7 @@ PatRoom4_Flr_4 Thermostat, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_4 DualSPSched; !- Control 1 Name @@ -18843,6 +18888,7 @@ PatRoom5_Mult10_Flr_3 Thermostat, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18850,6 +18896,7 @@ PatRoom5_Mult10_Flr_4 Thermostat, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18857,6 +18904,7 @@ PatRoom6_Flr_3 Thermostat, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_3 DualSPSched; !- Control 1 Name @@ -18864,6 +18912,7 @@ PatRoom6_Flr_4 Thermostat, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_4 DualSPSched; !- Control 1 Name @@ -18871,6 +18920,7 @@ PatRoom7_Mult10_Flr_3 Thermostat, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18878,6 +18928,7 @@ PatRoom7_Mult10_Flr_4 Thermostat, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18885,6 +18936,7 @@ PatRoom8_Flr_3 Thermostat, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_3 DualSPSched; !- Control 1 Name @@ -18892,6 +18944,7 @@ PatRoom8_Flr_4 Thermostat, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_4 DualSPSched; !- Control 1 Name @@ -18899,6 +18952,7 @@ PhysTherapy_Flr_3 Thermostat, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name @@ -18906,6 +18960,7 @@ Radiology_Flr_4 Thermostat, !- Name Radiology_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Radiology_Flr_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PlantLoopHeatPump_EIR_Large-Office-2-AWHP-DedHR-AuxBoiler-Pri-Sec-HW.idf b/testfiles/PlantLoopHeatPump_EIR_Large-Office-2-AWHP-DedHR-AuxBoiler-Pri-Sec-HW.idf index a29f1ea0254..e97225f66f2 100644 --- a/testfiles/PlantLoopHeatPump_EIR_Large-Office-2-AWHP-DedHR-AuxBoiler-Pri-Sec-HW.idf +++ b/testfiles/PlantLoopHeatPump_EIR_Large-Office-2-AWHP-DedHR-AuxBoiler-Pri-Sec-HW.idf @@ -7716,6 +7716,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -7723,6 +7724,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -7736,6 +7738,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -7749,6 +7752,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -7762,6 +7766,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -7775,6 +7780,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -7788,6 +7794,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -7801,6 +7808,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -7814,6 +7822,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -7827,6 +7836,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -7840,6 +7850,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -7853,6 +7864,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -7866,6 +7878,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7879,6 +7892,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7892,6 +7906,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -7905,6 +7920,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PlantLoopHeatPump_EIR_LargeOffice-2-AWHP-AuxBoiler-Pri-Sec-4PipeBeam.idf b/testfiles/PlantLoopHeatPump_EIR_LargeOffice-2-AWHP-AuxBoiler-Pri-Sec-4PipeBeam.idf index 1cec8e3f636..d8c49f8b337 100644 --- a/testfiles/PlantLoopHeatPump_EIR_LargeOffice-2-AWHP-AuxBoiler-Pri-Sec-4PipeBeam.idf +++ b/testfiles/PlantLoopHeatPump_EIR_LargeOffice-2-AWHP-AuxBoiler-Pri-Sec-4PipeBeam.idf @@ -6167,6 +6167,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6174,6 +6175,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6181,6 +6183,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6188,6 +6191,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6195,6 +6199,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6202,6 +6207,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6209,6 +6215,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6216,6 +6223,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6223,6 +6231,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6230,6 +6239,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6237,6 +6247,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6244,6 +6255,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6251,6 +6263,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6258,6 +6271,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6265,6 +6279,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6272,6 +6287,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PlateHeatExchanger.idf b/testfiles/PlateHeatExchanger.idf index c3b61f72d6a..62c5070a9c2 100644 --- a/testfiles/PlateHeatExchanger.idf +++ b/testfiles/PlateHeatExchanger.idf @@ -2271,6 +2271,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2280,6 +2281,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2289,6 +2291,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/Plenum.idf b/testfiles/Plenum.idf index 15a15f5dbd5..8a9e5149cde 100644 --- a/testfiles/Plenum.idf +++ b/testfiles/Plenum.idf @@ -1936,6 +1936,7 @@ Zone 1 Thermostat, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1945,6 +1946,7 @@ Zone 2 Thermostat, !- Name ZONE 2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1954,6 +1956,7 @@ Zone 4 Thermostat, !- Name ZONE 4, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PlenumwithRetAirHeatGain.idf b/testfiles/PlenumwithRetAirHeatGain.idf index a488b0e5741..7622c317be0 100644 --- a/testfiles/PlenumwithRetAirHeatGain.idf +++ b/testfiles/PlenumwithRetAirHeatGain.idf @@ -1379,6 +1379,7 @@ Zone 1 Thermostat, !- Name ZONE 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PondGroundHeatExchanger.idf b/testfiles/PondGroundHeatExchanger.idf index 022090e5eaf..f00cb9afd5d 100644 --- a/testfiles/PondGroundHeatExchanger.idf +++ b/testfiles/PondGroundHeatExchanger.idf @@ -2559,6 +2559,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2570,6 +2571,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2581,6 +2583,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2592,6 +2595,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2603,6 +2607,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PurchAirTables.idf b/testfiles/PurchAirTables.idf index 7e55f595981..49dfcd6c11a 100644 --- a/testfiles/PurchAirTables.idf +++ b/testfiles/PurchAirTables.idf @@ -1018,6 +1018,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1027,6 +1028,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1036,6 +1038,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirTables_SQL.idf b/testfiles/PurchAirTables_SQL.idf index 05d5d8f776c..96005f9dcb3 100644 --- a/testfiles/PurchAirTables_SQL.idf +++ b/testfiles/PurchAirTables_SQL.idf @@ -1018,6 +1018,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1027,6 +1028,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1036,6 +1038,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirTables_wAnnual.idf b/testfiles/PurchAirTables_wAnnual.idf index 007efb3b411..712378a6675 100644 --- a/testfiles/PurchAirTables_wAnnual.idf +++ b/testfiles/PurchAirTables_wAnnual.idf @@ -1018,6 +1018,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1027,6 +1028,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1036,6 +1038,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWindowBlind.idf b/testfiles/PurchAirWindowBlind.idf index 3209ea8d2f3..b7ea4406bed 100644 --- a/testfiles/PurchAirWindowBlind.idf +++ b/testfiles/PurchAirWindowBlind.idf @@ -1076,6 +1076,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1085,6 +1086,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1094,6 +1096,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWindowBlind_BlockBeamSolar.idf b/testfiles/PurchAirWindowBlind_BlockBeamSolar.idf index 311364dc93d..87ce10ec435 100644 --- a/testfiles/PurchAirWindowBlind_BlockBeamSolar.idf +++ b/testfiles/PurchAirWindowBlind_BlockBeamSolar.idf @@ -1064,6 +1064,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1073,6 +1074,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1082,6 +1084,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWithDaylighting.idf b/testfiles/PurchAirWithDaylighting.idf index 7be694a7c7f..f0b9fa4d2cd 100644 --- a/testfiles/PurchAirWithDaylighting.idf +++ b/testfiles/PurchAirWithDaylighting.idf @@ -1307,6 +1307,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1316,6 +1317,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1325,6 +1327,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWithDaylightingAndShadeControl.idf b/testfiles/PurchAirWithDaylightingAndShadeControl.idf index b1969e0fdf4..60ed436bc9d 100644 --- a/testfiles/PurchAirWithDaylightingAndShadeControl.idf +++ b/testfiles/PurchAirWithDaylightingAndShadeControl.idf @@ -1791,6 +1791,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1800,6 +1801,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1809,6 +1811,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWithDaylightingAngleFac.idf b/testfiles/PurchAirWithDaylightingAngleFac.idf index ad90796e95a..d1faa68e646 100644 --- a/testfiles/PurchAirWithDaylightingAngleFac.idf +++ b/testfiles/PurchAirWithDaylightingAngleFac.idf @@ -1245,6 +1245,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1254,6 +1255,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1263,6 +1265,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PurchAirWithDoubleFacadeDaylighting.idf b/testfiles/PurchAirWithDoubleFacadeDaylighting.idf index b08510afe86..9c0148d2c04 100644 --- a/testfiles/PurchAirWithDoubleFacadeDaylighting.idf +++ b/testfiles/PurchAirWithDoubleFacadeDaylighting.idf @@ -1225,6 +1225,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1234,6 +1235,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1243,6 +1245,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PythonPluginAirflowNetworkOpeningControlByHumidity.idf b/testfiles/PythonPluginAirflowNetworkOpeningControlByHumidity.idf index ee372da9e7a..fd2daab8a0b 100644 --- a/testfiles/PythonPluginAirflowNetworkOpeningControlByHumidity.idf +++ b/testfiles/PythonPluginAirflowNetworkOpeningControlByHumidity.idf @@ -3095,6 +3095,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3102,6 +3103,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3109,6 +3111,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/PythonPluginConstantVolumePurchasedAir.idf b/testfiles/PythonPluginConstantVolumePurchasedAir.idf index 2cd34666841..dce0d8e62f0 100644 --- a/testfiles/PythonPluginConstantVolumePurchasedAir.idf +++ b/testfiles/PythonPluginConstantVolumePurchasedAir.idf @@ -1069,6 +1069,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1078,6 +1079,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1087,6 +1089,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PythonPluginCurveOverride_PackagedTerminalHeatPump.idf b/testfiles/PythonPluginCurveOverride_PackagedTerminalHeatPump.idf index 7003bb66da5..7750b51ca3e 100644 --- a/testfiles/PythonPluginCurveOverride_PackagedTerminalHeatPump.idf +++ b/testfiles/PythonPluginCurveOverride_PackagedTerminalHeatPump.idf @@ -1454,6 +1454,7 @@ Zone 1 Thermostat, !- Name WEST ZONE, !- Zone or ZoneList Name West Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -1476,6 +1477,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1485,6 +1487,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Other Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PythonPluginCustomOutputVariable.idf b/testfiles/PythonPluginCustomOutputVariable.idf index ae2499f5b33..0591e672f2f 100644 --- a/testfiles/PythonPluginCustomOutputVariable.idf +++ b/testfiles/PythonPluginCustomOutputVariable.idf @@ -1506,6 +1506,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2021,6 +2022,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2436,6 +2438,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2881,6 +2884,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3296,6 +3300,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginCustomSchedule.idf b/testfiles/PythonPluginCustomSchedule.idf index 2939c971df1..a5effeb50a2 100644 --- a/testfiles/PythonPluginCustomSchedule.idf +++ b/testfiles/PythonPluginCustomSchedule.idf @@ -1470,6 +1470,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -1985,6 +1986,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2400,6 +2402,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2845,6 +2848,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3260,6 +3264,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginCustomTrendVariable.idf b/testfiles/PythonPluginCustomTrendVariable.idf index 6edb30b2700..e44d04c39fa 100644 --- a/testfiles/PythonPluginCustomTrendVariable.idf +++ b/testfiles/PythonPluginCustomTrendVariable.idf @@ -1505,6 +1505,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2020,6 +2021,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2435,6 +2437,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2880,6 +2883,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3295,6 +3299,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginDemandManager_LargeOffice.idf b/testfiles/PythonPluginDemandManager_LargeOffice.idf index cf3a53c744f..a91abfa35b4 100644 --- a/testfiles/PythonPluginDemandManager_LargeOffice.idf +++ b/testfiles/PythonPluginDemandManager_LargeOffice.idf @@ -1603,6 +1603,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1944,6 +1945,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2340,6 +2342,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2765,6 +2768,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3205,6 +3209,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3590,6 +3595,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3975,6 +3981,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4360,6 +4367,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4745,6 +4753,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5130,6 +5139,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5515,6 +5525,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5900,6 +5911,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6285,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6670,6 +6683,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7055,6 +7069,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7440,6 +7455,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginDiscreteAirSystemSizes.idf b/testfiles/PythonPluginDiscreteAirSystemSizes.idf index 00dbbb4ed97..bf16bcf2034 100644 --- a/testfiles/PythonPluginDiscreteAirSystemSizes.idf +++ b/testfiles/PythonPluginDiscreteAirSystemSizes.idf @@ -1516,6 +1516,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -1931,6 +1932,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -2346,6 +2348,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -2761,6 +2764,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3176,6 +3180,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3651,6 +3656,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -4066,6 +4072,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -4481,6 +4488,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -4896,6 +4904,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -5311,6 +5320,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginLoadBasedMultiSpeedDXCoilOverrideControl.idf b/testfiles/PythonPluginLoadBasedMultiSpeedDXCoilOverrideControl.idf index bddf71963c1..01082c0ef54 100644 --- a/testfiles/PythonPluginLoadBasedMultiSpeedDXCoilOverrideControl.idf +++ b/testfiles/PythonPluginLoadBasedMultiSpeedDXCoilOverrideControl.idf @@ -1860,6 +1860,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1951,6 +1952,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2042,6 +2044,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2133,6 +2136,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2224,6 +2228,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/PythonPluginLrgOff_GridStorageSmoothing.idf b/testfiles/PythonPluginLrgOff_GridStorageSmoothing.idf index 11a7a2fa194..e4dd0c7e448 100644 --- a/testfiles/PythonPluginLrgOff_GridStorageSmoothing.idf +++ b/testfiles/PythonPluginLrgOff_GridStorageSmoothing.idf @@ -6185,6 +6185,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6192,6 +6193,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6199,6 +6201,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6206,6 +6209,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6213,6 +6217,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6220,6 +6225,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6227,6 +6233,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6234,6 +6241,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6241,6 +6249,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6248,6 +6257,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6255,6 +6265,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6262,6 +6273,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6269,6 +6281,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6276,6 +6289,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6283,6 +6297,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6290,6 +6305,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginMultiSpeedHeatPumpOverrideControl.idf b/testfiles/PythonPluginMultiSpeedHeatPumpOverrideControl.idf index 53c516b9f3e..46be6ba2918 100644 --- a/testfiles/PythonPluginMultiSpeedHeatPumpOverrideControl.idf +++ b/testfiles/PythonPluginMultiSpeedHeatPumpOverrideControl.idf @@ -1455,6 +1455,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1462,8 +1463,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/PythonPluginPlantLoopOverrideControl.idf b/testfiles/PythonPluginPlantLoopOverrideControl.idf index ca50764f1b7..def00d54d68 100644 --- a/testfiles/PythonPluginPlantLoopOverrideControl.idf +++ b/testfiles/PythonPluginPlantLoopOverrideControl.idf @@ -6529,6 +6529,7 @@ ZN1_S_Space_1 Thermostat,!- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_S_Space_1 DualSPSched; !- Control 1 Name @@ -6536,6 +6537,7 @@ ZN2_E_Space_1 Thermostat,!- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_E_Space_1 DualSPSched; !- Control 1 Name @@ -6543,6 +6545,7 @@ ZN3_N_Space_1 Thermostat,!- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_N_Space_1 DualSPSched; !- Control 1 Name @@ -6550,6 +6553,7 @@ ZN4_W_Space_1 Thermostat,!- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_W_Space_1 DualSPSched; !- Control 1 Name @@ -6557,6 +6561,7 @@ ZN5_Core_Space_1 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_Core_Space_1 DualSPSched; !- Control 1 Name @@ -6564,6 +6569,7 @@ ZN6_S_Space_2 Thermostat,!- Name ZN6_S_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN6_S_Space_2 DualSPSched; !- Control 1 Name @@ -6571,6 +6577,7 @@ ZN7_E_Space_2 Thermostat,!- Name ZN7_E_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN7_E_Space_2 DualSPSched; !- Control 1 Name @@ -6578,6 +6585,7 @@ ZN8_N_Space_2 Thermostat,!- Name ZN8_N_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN8_N_Space_2 DualSPSched; !- Control 1 Name @@ -6585,6 +6593,7 @@ ZN9_W_Space_2 Thermostat,!- Name ZN9_W_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN9_W_Space_2 DualSPSched; !- Control 1 Name @@ -6592,6 +6601,7 @@ ZN10_Core_Space_2 Thermostat, !- Name ZN10_Core_Space_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN10_Core_Space_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginPlantOperation_largeOff.idf b/testfiles/PythonPluginPlantOperation_largeOff.idf index e527859c109..48e5214eefb 100644 --- a/testfiles/PythonPluginPlantOperation_largeOff.idf +++ b/testfiles/PythonPluginPlantOperation_largeOff.idf @@ -6181,6 +6181,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6188,6 +6189,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6195,6 +6197,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6202,6 +6205,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6209,6 +6213,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6216,6 +6221,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6223,6 +6229,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6230,6 +6237,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6237,6 +6245,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6244,6 +6253,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6251,6 +6261,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6258,6 +6269,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6265,6 +6277,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6272,6 +6285,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6279,6 +6293,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6286,6 +6301,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginReplaceTraditionalManagers_LargeOffice.idf b/testfiles/PythonPluginReplaceTraditionalManagers_LargeOffice.idf index bd38d5d3ea6..94d7361344f 100644 --- a/testfiles/PythonPluginReplaceTraditionalManagers_LargeOffice.idf +++ b/testfiles/PythonPluginReplaceTraditionalManagers_LargeOffice.idf @@ -1591,6 +1591,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -1932,6 +1933,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -2328,6 +2330,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -2753,6 +2756,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -3193,6 +3197,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -3578,6 +3583,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -3963,6 +3969,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -4348,6 +4355,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -4733,6 +4741,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5118,6 +5127,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5503,6 +5513,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5888,6 +5899,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6273,6 +6285,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6658,6 +6671,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -7043,6 +7057,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -7428,6 +7443,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginTestMathAndKill.idf b/testfiles/PythonPluginTestMathAndKill.idf index a30f7f009ff..8c6bb5a1588 100644 --- a/testfiles/PythonPluginTestMathAndKill.idf +++ b/testfiles/PythonPluginTestMathAndKill.idf @@ -1687,6 +1687,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2202,6 +2203,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2617,6 +2619,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -3062,6 +3065,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3477,6 +3481,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginThermochromicWindow.idf b/testfiles/PythonPluginThermochromicWindow.idf index 4207113cea7..591270b28d4 100644 --- a/testfiles/PythonPluginThermochromicWindow.idf +++ b/testfiles/PythonPluginThermochromicWindow.idf @@ -1427,6 +1427,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -1937,6 +1938,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2347,6 +2349,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2787,6 +2790,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3197,6 +3201,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/PythonPluginUserDefined5ZoneAirCooled.idf b/testfiles/PythonPluginUserDefined5ZoneAirCooled.idf index 92d0d0d436a..449d4ffbc6e 100644 --- a/testfiles/PythonPluginUserDefined5ZoneAirCooled.idf +++ b/testfiles/PythonPluginUserDefined5ZoneAirCooled.idf @@ -2240,6 +2240,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2251,6 +2252,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2264,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2276,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2288,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/PythonPluginUserDefinedWindACAuto.idf b/testfiles/PythonPluginUserDefinedWindACAuto.idf index 7dc6d3df17b..7dc7a4857bd 100644 --- a/testfiles/PythonPluginUserDefinedWindACAuto.idf +++ b/testfiles/PythonPluginUserDefinedWindACAuto.idf @@ -1571,6 +1571,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1580,6 +1581,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1589,6 +1591,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PythonPluginWindowShadeControl.idf b/testfiles/PythonPluginWindowShadeControl.idf index 220861ade21..c2ef9a2bca8 100644 --- a/testfiles/PythonPluginWindowShadeControl.idf +++ b/testfiles/PythonPluginWindowShadeControl.idf @@ -1061,6 +1061,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1070,6 +1071,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1079,6 +1081,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/PythonPlugin_SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf b/testfiles/PythonPlugin_SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf index b07c1891a88..18d778094e1 100644 --- a/testfiles/PythonPlugin_SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf +++ b/testfiles/PythonPlugin_SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf @@ -1540,6 +1540,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1547,8 +1548,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/RadHiTempElecTermReheat.idf b/testfiles/RadHiTempElecTermReheat.idf index 5e18f5be98b..485f15fe238 100644 --- a/testfiles/RadHiTempElecTermReheat.idf +++ b/testfiles/RadHiTempElecTermReheat.idf @@ -1832,6 +1832,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1841,6 +1842,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1850,6 +1852,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadHiTempGasCtrlOpt.idf b/testfiles/RadHiTempGasCtrlOpt.idf index 18be254ba1b..a58a4db9d06 100644 --- a/testfiles/RadHiTempGasCtrlOpt.idf +++ b/testfiles/RadHiTempGasCtrlOpt.idf @@ -1826,6 +1826,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1835,6 +1836,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1844,6 +1846,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadHiTempGasTermReheat.idf b/testfiles/RadHiTempGasTermReheat.idf index e0e58746484..934be5709b0 100644 --- a/testfiles/RadHiTempGasTermReheat.idf +++ b/testfiles/RadHiTempGasTermReheat.idf @@ -1832,6 +1832,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1841,6 +1842,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1850,6 +1852,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoHydrHeatCoolAuto.idf b/testfiles/RadLoHydrHeatCoolAuto.idf index 8b11ef1b3e1..e4ee7a3a881 100644 --- a/testfiles/RadLoHydrHeatCoolAuto.idf +++ b/testfiles/RadLoHydrHeatCoolAuto.idf @@ -1828,6 +1828,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1837,6 +1838,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1846,6 +1848,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoHydrHeatCoolAutoCondFD.idf b/testfiles/RadLoHydrHeatCoolAutoCondFD.idf index a40fff2b77e..942db66afa8 100644 --- a/testfiles/RadLoHydrHeatCoolAutoCondFD.idf +++ b/testfiles/RadLoHydrHeatCoolAutoCondFD.idf @@ -1399,6 +1399,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1408,6 +1409,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1417,6 +1419,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempCFloHeatCoolCondFD.idf b/testfiles/RadLoTempCFloHeatCoolCondFD.idf index 816b777b517..95ab0dbd86d 100644 --- a/testfiles/RadLoTempCFloHeatCoolCondFD.idf +++ b/testfiles/RadLoTempCFloHeatCoolCondFD.idf @@ -1278,6 +1278,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1287,6 +1288,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1296,6 +1298,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempCFloHeatCool_AddedAutosizing.idf b/testfiles/RadLoTempCFloHeatCool_AddedAutosizing.idf index 2eba4602644..f305e838649 100644 --- a/testfiles/RadLoTempCFloHeatCool_AddedAutosizing.idf +++ b/testfiles/RadLoTempCFloHeatCool_AddedAutosizing.idf @@ -1948,6 +1948,7 @@ Thermostat, !- Name All Zones, !- Zone or ZoneList Name Always Dual Setpoint, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetpointControl; !- Control 1 Name diff --git a/testfiles/RadLoTempCFloTermReheat.idf b/testfiles/RadLoTempCFloTermReheat.idf index 2117823b721..bee5902b162 100644 --- a/testfiles/RadLoTempCFloTermReheat.idf +++ b/testfiles/RadLoTempCFloTermReheat.idf @@ -1907,6 +1907,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type Cooling Setpoint with SB;!- Control 1 Name @@ -1914,6 +1915,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type Cooling Setpoint with SB;!- Control 1 Name @@ -1921,6 +1923,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type Cooling Setpoint with SB;!- Control 1 Name diff --git a/testfiles/RadLoTempElecCtrlOpt2.idf b/testfiles/RadLoTempElecCtrlOpt2.idf index aebd11c58c3..a968966e52d 100644 --- a/testfiles/RadLoTempElecCtrlOpt2.idf +++ b/testfiles/RadLoTempElecCtrlOpt2.idf @@ -1972,6 +1972,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1981,6 +1982,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1990,6 +1992,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempElecTermReheat.idf b/testfiles/RadLoTempElecTermReheat.idf index 00b8416e210..41d2503ba1a 100644 --- a/testfiles/RadLoTempElecTermReheat.idf +++ b/testfiles/RadLoTempElecTermReheat.idf @@ -1970,6 +1970,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1979,6 +1980,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1988,6 +1990,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempElecTermReheatCondFD.idf b/testfiles/RadLoTempElecTermReheatCondFD.idf index 20e9f5cc1a5..1440606cd43 100644 --- a/testfiles/RadLoTempElecTermReheatCondFD.idf +++ b/testfiles/RadLoTempElecTermReheatCondFD.idf @@ -1249,6 +1249,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1258,6 +1259,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1267,6 +1269,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrCoolTower.idf b/testfiles/RadLoTempHydrCoolTower.idf index f326eadda64..8fc334c1e0d 100644 --- a/testfiles/RadLoTempHydrCoolTower.idf +++ b/testfiles/RadLoTempHydrCoolTower.idf @@ -1653,6 +1653,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1662,6 +1663,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1671,6 +1673,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrCoolTowerCondFD.idf b/testfiles/RadLoTempHydrCoolTowerCondFD.idf index cc84123b1da..53c8c499760 100644 --- a/testfiles/RadLoTempHydrCoolTowerCondFD.idf +++ b/testfiles/RadLoTempHydrCoolTowerCondFD.idf @@ -1358,6 +1358,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1367,6 +1368,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1376,6 +1378,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrCtrlOpt.idf b/testfiles/RadLoTempHydrCtrlOpt.idf index 752dec9fda0..af70e136ec2 100644 --- a/testfiles/RadLoTempHydrCtrlOpt.idf +++ b/testfiles/RadLoTempHydrCtrlOpt.idf @@ -1996,6 +1996,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2005,6 +2006,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2014,6 +2016,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrCtrlOpt2.idf b/testfiles/RadLoTempHydrCtrlOpt2.idf index c6c637d2d78..71afaa55fef 100644 --- a/testfiles/RadLoTempHydrCtrlOpt2.idf +++ b/testfiles/RadLoTempHydrCtrlOpt2.idf @@ -1998,6 +1998,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2007,6 +2008,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2016,6 +2018,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrCtrlOpt3.idf b/testfiles/RadLoTempHydrCtrlOpt3.idf index b65f93dcbb1..f483d7bc30b 100644 --- a/testfiles/RadLoTempHydrCtrlOpt3.idf +++ b/testfiles/RadLoTempHydrCtrlOpt3.idf @@ -2003,6 +2003,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2012,6 +2013,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2021,6 +2023,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrHeatCool.idf b/testfiles/RadLoTempHydrHeatCool.idf index ffc2032090c..8b725ac37d1 100644 --- a/testfiles/RadLoTempHydrHeatCool.idf +++ b/testfiles/RadLoTempHydrHeatCool.idf @@ -1986,6 +1986,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1995,6 +1996,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2004,6 +2006,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrHeatCool2D.idf b/testfiles/RadLoTempHydrHeatCool2D.idf index ec6f042ef61..c6fc459c0a3 100644 --- a/testfiles/RadLoTempHydrHeatCool2D.idf +++ b/testfiles/RadLoTempHydrHeatCool2D.idf @@ -1986,6 +1986,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1995,6 +1996,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2004,6 +2006,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrHeatCoolDry.idf b/testfiles/RadLoTempHydrHeatCoolDry.idf index aadb3512269..24d4991446a 100644 --- a/testfiles/RadLoTempHydrHeatCoolDry.idf +++ b/testfiles/RadLoTempHydrHeatCoolDry.idf @@ -1986,6 +1986,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1995,6 +1996,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2004,6 +2006,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrHeatCoolDryCondFD.idf b/testfiles/RadLoTempHydrHeatCoolDryCondFD.idf index 0ad2a2f54e2..630e0bf14a0 100644 --- a/testfiles/RadLoTempHydrHeatCoolDryCondFD.idf +++ b/testfiles/RadLoTempHydrHeatCoolDryCondFD.idf @@ -1236,6 +1236,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1245,6 +1246,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1254,6 +1256,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrHeatCoolMultiZone.idf b/testfiles/RadLoTempHydrHeatCoolMultiZone.idf index 1b3bdce4a0b..7b501609c7a 100644 --- a/testfiles/RadLoTempHydrHeatCoolMultiZone.idf +++ b/testfiles/RadLoTempHydrHeatCoolMultiZone.idf @@ -1858,6 +1858,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrISOPipeHT.idf b/testfiles/RadLoTempHydrISOPipeHT.idf index ebc8afb71bd..6bf7142ca6a 100644 --- a/testfiles/RadLoTempHydrISOPipeHT.idf +++ b/testfiles/RadLoTempHydrISOPipeHT.idf @@ -1986,6 +1986,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1995,6 +1996,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2004,6 +2006,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrInterMulti.idf b/testfiles/RadLoTempHydrInterMulti.idf index 668df92af06..1b271bee4f0 100644 --- a/testfiles/RadLoTempHydrInterMulti.idf +++ b/testfiles/RadLoTempHydrInterMulti.idf @@ -1964,6 +1964,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1973,6 +1974,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrMulti10.idf b/testfiles/RadLoTempHydrMulti10.idf index 66727512461..3a4426a19a4 100644 --- a/testfiles/RadLoTempHydrMulti10.idf +++ b/testfiles/RadLoTempHydrMulti10.idf @@ -1737,6 +1737,7 @@ Zone 1 Thermostat, !- Name Zone 1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RadLoTempHydrTermReheat.idf b/testfiles/RadLoTempHydrTermReheat.idf index 6acf54ab958..a813b284356 100644 --- a/testfiles/RadLoTempHydrTermReheat.idf +++ b/testfiles/RadLoTempHydrTermReheat.idf @@ -2006,6 +2006,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2015,6 +2016,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2024,6 +2026,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RefBldgFullServiceRestaurantNew2004_Chicago.idf b/testfiles/RefBldgFullServiceRestaurantNew2004_Chicago.idf index 1a5d6465312..38cb650acb8 100644 --- a/testfiles/RefBldgFullServiceRestaurantNew2004_Chicago.idf +++ b/testfiles/RefBldgFullServiceRestaurantNew2004_Chicago.idf @@ -1601,6 +1601,7 @@ Dining Thermostat, !- Name Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining DualSPSched; !- Control 1 Name @@ -1608,6 +1609,7 @@ Kitchen Thermostat, !- Name Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgHospitalNew2004_Chicago.idf b/testfiles/RefBldgHospitalNew2004_Chicago.idf index b98ab1fe998..cf703318966 100644 --- a/testfiles/RefBldgHospitalNew2004_Chicago.idf +++ b/testfiles/RefBldgHospitalNew2004_Chicago.idf @@ -18523,6 +18523,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -18530,6 +18531,7 @@ Corridor_Flr_1 Thermostat, !- Name Corridor_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_1 DualSPSched; !- Control 1 Name @@ -18537,6 +18539,7 @@ Corridor_Flr_2 Thermostat, !- Name Corridor_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_2 DualSPSched; !- Control 1 Name @@ -18544,6 +18547,7 @@ Corridor_Flr_5 Thermostat, !- Name Corridor_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_5 DualSPSched; !- Control 1 Name @@ -18551,6 +18555,7 @@ Corridor_NW_Flr_3 Thermostat, !- Name Corridor_NW_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name @@ -18558,6 +18563,7 @@ Corridor_NW_Flr_4 Thermostat, !- Name Corridor_NW_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name @@ -18565,6 +18571,7 @@ Corridor_SE_Flr_3 Thermostat, !- Name Corridor_SE_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name @@ -18572,6 +18579,7 @@ Corridor_SE_Flr_4 Thermostat, !- Name Corridor_SE_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name @@ -18579,6 +18587,7 @@ Dining_Flr_5 Thermostat, !- Name Dining_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_5 DualSPSched;!- Control 1 Name @@ -18586,6 +18595,7 @@ ER_Exam1_Mult4_Flr_1 Thermostat, !- Name ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18593,6 +18603,7 @@ ER_Exam3_Mult4_Flr_1 Thermostat, !- Name ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18600,6 +18611,7 @@ ER_NurseStn_Lobby_Flr_1 Thermostat, !- Name ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_NurseStn_Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -18607,6 +18619,7 @@ ER_Trauma1_Flr_1 Thermostat, !- Name ER_Trauma1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma1_Flr_1 DualSPSched; !- Control 1 Name @@ -18614,6 +18627,7 @@ ER_Trauma2_Flr_1 Thermostat, !- Name ER_Trauma2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Trauma2_Flr_1 DualSPSched; !- Control 1 Name @@ -18621,6 +18635,7 @@ ER_Triage_Mult4_Flr_1 Thermostat, !- Name ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ER_Triage_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18628,6 +18643,7 @@ ICU_Flr_2 Thermostat, !- Name ICU_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_Flr_2 DualSPSched; !- Control 1 Name @@ -18635,6 +18651,7 @@ ICU_NurseStn_Lobby_Flr_2 Thermostat, !- Name ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ICU_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18642,6 +18659,7 @@ IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18649,6 +18667,7 @@ IC_PatRoom2_Flr_2 Thermostat, !- Name IC_PatRoom2_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name @@ -18656,6 +18675,7 @@ IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name @@ -18663,6 +18683,7 @@ Kitchen_Flr_5 Thermostat,!- Name Kitchen_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_5 DualSPSched; !- Control 1 Name @@ -18670,6 +18691,7 @@ Lab_Flr_3 Thermostat, !- Name Lab_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_3 DualSPSched; !- Control 1 Name @@ -18677,6 +18699,7 @@ Lab_Flr_4 Thermostat, !- Name Lab_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lab_Flr_4 DualSPSched; !- Control 1 Name @@ -18684,6 +18707,7 @@ Lobby_Records_Flr_1 Thermostat, !- Name Lobby_Records_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Records_Flr_1 DualSPSched; !- Control 1 Name @@ -18691,6 +18715,7 @@ NurseStn_Lobby_Flr_3 Thermostat, !- Name NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_3 DualSPSched; !- Control 1 Name @@ -18698,6 +18723,7 @@ NurseStn_Lobby_Flr_4 Thermostat, !- Name NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_4 DualSPSched; !- Control 1 Name @@ -18705,6 +18731,7 @@ NurseStn_Lobby_Flr_5 Thermostat, !- Name NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type NurseStn_Lobby_Flr_5 DualSPSched; !- Control 1 Name @@ -18712,6 +18739,7 @@ OR1_Flr_2 Thermostat, !- Name OR1_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR1_Flr_2 DualSPSched; !- Control 1 Name @@ -18719,6 +18747,7 @@ OR2_Mult5_Flr_2 Thermostat, !- Name OR2_Mult5_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name @@ -18726,6 +18755,7 @@ OR3_Flr_2 Thermostat, !- Name OR3_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR3_Flr_2 DualSPSched; !- Control 1 Name @@ -18733,6 +18763,7 @@ OR4_Flr_2 Thermostat, !- Name OR4_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR4_Flr_2 DualSPSched; !- Control 1 Name @@ -18740,6 +18771,7 @@ OR_NurseStn_Lobby_Flr_2 Thermostat, !- Name OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type OR_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name @@ -18747,6 +18779,7 @@ Office1_Flr_5 Thermostat,!- Name Office1_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Flr_5 DualSPSched; !- Control 1 Name @@ -18754,6 +18787,7 @@ Office1_Mult4_Flr_1 Thermostat, !- Name Office1_Mult4_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name @@ -18761,6 +18795,7 @@ Office2_Mult5_Flr_5 Thermostat, !- Name Office2_Mult5_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name @@ -18768,6 +18803,7 @@ Office3_Flr_5 Thermostat,!- Name Office3_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office3_Flr_5 DualSPSched; !- Control 1 Name @@ -18775,6 +18811,7 @@ Office4_Mult6_Flr_5 Thermostat, !- Name Office4_Mult6_Flr_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name @@ -18782,6 +18819,7 @@ PatRoom1_Mult10_Flr_3 Thermostat, !- Name PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18789,6 +18827,7 @@ PatRoom1_Mult10_Flr_4 Thermostat, !- Name PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18796,6 +18835,7 @@ PatRoom2_Flr_3 Thermostat, !- Name PatRoom2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_3 DualSPSched; !- Control 1 Name @@ -18803,6 +18843,7 @@ PatRoom2_Flr_4 Thermostat, !- Name PatRoom2_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom2_Flr_4 DualSPSched; !- Control 1 Name @@ -18810,6 +18851,7 @@ PatRoom3_Mult10_Flr_3 Thermostat, !- Name PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18817,6 +18859,7 @@ PatRoom3_Mult10_Flr_4 Thermostat, !- Name PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18824,6 +18867,7 @@ PatRoom4_Flr_3 Thermostat, !- Name PatRoom4_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_3 DualSPSched; !- Control 1 Name @@ -18831,6 +18875,7 @@ PatRoom4_Flr_4 Thermostat, !- Name PatRoom4_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom4_Flr_4 DualSPSched; !- Control 1 Name @@ -18838,6 +18883,7 @@ PatRoom5_Mult10_Flr_3 Thermostat, !- Name PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18845,6 +18891,7 @@ PatRoom5_Mult10_Flr_4 Thermostat, !- Name PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18852,6 +18899,7 @@ PatRoom6_Flr_3 Thermostat, !- Name PatRoom6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_3 DualSPSched; !- Control 1 Name @@ -18859,6 +18907,7 @@ PatRoom6_Flr_4 Thermostat, !- Name PatRoom6_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom6_Flr_4 DualSPSched; !- Control 1 Name @@ -18866,6 +18915,7 @@ PatRoom7_Mult10_Flr_3 Thermostat, !- Name PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name @@ -18873,6 +18923,7 @@ PatRoom7_Mult10_Flr_4 Thermostat, !- Name PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name @@ -18880,6 +18931,7 @@ PatRoom8_Flr_3 Thermostat, !- Name PatRoom8_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_3 DualSPSched; !- Control 1 Name @@ -18887,6 +18939,7 @@ PatRoom8_Flr_4 Thermostat, !- Name PatRoom8_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PatRoom8_Flr_4 DualSPSched; !- Control 1 Name @@ -18894,6 +18947,7 @@ PhysTherapy_Flr_3 Thermostat, !- Name PhysTherapy_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name @@ -18901,6 +18955,7 @@ Radiology_Flr_4 Thermostat, !- Name Radiology_Flr_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Radiology_Flr_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgLargeHotelNew2004_Chicago.idf b/testfiles/RefBldgLargeHotelNew2004_Chicago.idf index 2bb0390310a..e770ce2df03 100644 --- a/testfiles/RefBldgLargeHotelNew2004_Chicago.idf +++ b/testfiles/RefBldgLargeHotelNew2004_Chicago.idf @@ -9100,6 +9100,7 @@ Banquet_Flr_6 Thermostat,!- Name Banquet_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Banquet_Flr_6 DualSPSched; !- Control 1 Name @@ -9107,6 +9108,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -9114,6 +9116,7 @@ Cafe_Flr_1 Thermostat, !- Name Cafe_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafe_Flr_1 DualSPSched; !- Control 1 Name @@ -9121,6 +9124,7 @@ Corridor_Flr_3 Thermostat, !- Name Corridor_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_3 DualSPSched; !- Control 1 Name @@ -9128,6 +9132,7 @@ Corridor_Flr_6 Thermostat, !- Name Corridor_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Flr_6 DualSPSched; !- Control 1 Name @@ -9135,6 +9140,7 @@ Dining_Flr_6 Thermostat, !- Name Dining_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining_Flr_6 DualSPSched;!- Control 1 Name @@ -9142,6 +9148,7 @@ Kitchen_Flr_6 Thermostat,!- Name Kitchen_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_Flr_6 DualSPSched; !- Control 1 Name @@ -9149,6 +9156,7 @@ Laundry_Flr_1 Thermostat,!- Name Laundry_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Laundry_Flr_1 DualSPSched; !- Control 1 Name @@ -9156,6 +9164,7 @@ Lobby_Flr_1 Thermostat, !- Name Lobby_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_Flr_1 DualSPSched; !- Control 1 Name @@ -9163,6 +9172,7 @@ Mech_Flr_1 Thermostat, !- Name Mech_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_Flr_1 DualSPSched; !- Control 1 Name @@ -9170,6 +9180,7 @@ Retail_1_Flr_1 Thermostat, !- Name Retail_1_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Retail_1_Flr_1 DualSPSched; !- Control 1 Name @@ -9177,6 +9188,7 @@ Retail_2_Flr_1 Thermostat, !- Name Retail_2_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Retail_2_Flr_1 DualSPSched; !- Control 1 Name @@ -9184,6 +9196,7 @@ Room_1_Flr_3 Thermostat, !- Name Room_1_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_1_Flr_3 DualSPSched;!- Control 1 Name @@ -9191,6 +9204,7 @@ Room_1_Flr_6 Thermostat, !- Name Room_1_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_1_Flr_6 DualSPSched;!- Control 1 Name @@ -9198,6 +9212,7 @@ Room_2_Flr_3 Thermostat, !- Name Room_2_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_2_Flr_3 DualSPSched;!- Control 1 Name @@ -9205,6 +9220,7 @@ Room_2_Flr_6 Thermostat, !- Name Room_2_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_2_Flr_6 DualSPSched;!- Control 1 Name @@ -9212,6 +9228,7 @@ Room_3_Mult19_Flr_3 Thermostat, !- Name Room_3_Mult19_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_3_Mult19_Flr_3 DualSPSched; !- Control 1 Name @@ -9219,6 +9236,7 @@ Room_3_Mult9_Flr_6 Thermostat, !- Name Room_3_Mult9_Flr_6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_3_Mult9_Flr_6 DualSPSched; !- Control 1 Name @@ -9226,6 +9244,7 @@ Room_4_Mult19_Flr_3 Thermostat, !- Name Room_4_Mult19_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_4_Mult19_Flr_3 DualSPSched; !- Control 1 Name @@ -9233,6 +9252,7 @@ Room_5_Flr_3 Thermostat, !- Name Room_5_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_5_Flr_3 DualSPSched;!- Control 1 Name @@ -9240,6 +9260,7 @@ Room_6_Flr_3 Thermostat, !- Name Room_6_Flr_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Room_6_Flr_3 DualSPSched;!- Control 1 Name @@ -9247,6 +9268,7 @@ Storage_Flr_1 Thermostat,!- Name Storage_Flr_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Storage_Flr_1 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgLargeOfficeNew2004_Chicago-ReturnReset.idf b/testfiles/RefBldgLargeOfficeNew2004_Chicago-ReturnReset.idf index 11339735a9d..23fe37a6788 100644 --- a/testfiles/RefBldgLargeOfficeNew2004_Chicago-ReturnReset.idf +++ b/testfiles/RefBldgLargeOfficeNew2004_Chicago-ReturnReset.idf @@ -6197,6 +6197,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6204,6 +6205,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6211,6 +6213,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6218,6 +6221,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6225,6 +6229,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6232,6 +6237,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6239,6 +6245,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6246,6 +6253,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6253,6 +6261,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6260,6 +6269,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6267,6 +6277,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6274,6 +6285,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6281,6 +6293,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6288,6 +6301,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6295,6 +6309,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6302,6 +6317,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgLargeOfficeNew2004_Chicago.idf b/testfiles/RefBldgLargeOfficeNew2004_Chicago.idf index 9253a1db2dd..6bc2011809e 100644 --- a/testfiles/RefBldgLargeOfficeNew2004_Chicago.idf +++ b/testfiles/RefBldgLargeOfficeNew2004_Chicago.idf @@ -6196,6 +6196,7 @@ Basement Thermostat, !- Name Basement, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Basement DualSPSched; !- Control 1 Name @@ -6203,6 +6204,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6210,6 +6212,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6217,6 +6220,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6224,6 +6228,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6231,6 +6236,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6238,6 +6244,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6245,6 +6252,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6252,6 +6260,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6259,6 +6268,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6266,6 +6276,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6273,6 +6284,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6280,6 +6292,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6287,6 +6300,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6294,6 +6308,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6301,6 +6316,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgMediumOfficeNew2004_Chicago.idf b/testfiles/RefBldgMediumOfficeNew2004_Chicago.idf index a8abe58ea3f..07b351af66b 100644 --- a/testfiles/RefBldgMediumOfficeNew2004_Chicago.idf +++ b/testfiles/RefBldgMediumOfficeNew2004_Chicago.idf @@ -5907,6 +5907,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5914,6 +5915,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5921,6 +5923,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5928,6 +5931,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5935,6 +5939,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5942,6 +5947,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5949,6 +5955,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5956,6 +5963,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5963,6 +5971,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5970,6 +5979,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5977,6 +5987,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5984,6 +5995,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5991,6 +6003,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5998,6 +6011,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6005,6 +6019,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgMediumOfficeNew2004_Chicago_JSON_Outputs.idf b/testfiles/RefBldgMediumOfficeNew2004_Chicago_JSON_Outputs.idf index 82f9a022974..d2267c27725 100644 --- a/testfiles/RefBldgMediumOfficeNew2004_Chicago_JSON_Outputs.idf +++ b/testfiles/RefBldgMediumOfficeNew2004_Chicago_JSON_Outputs.idf @@ -5906,6 +5906,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5913,6 +5914,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5920,6 +5922,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5927,6 +5930,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5934,6 +5938,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5941,6 +5946,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5948,6 +5954,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5955,6 +5962,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5962,6 +5970,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5969,6 +5978,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5976,6 +5986,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5983,6 +5994,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5990,6 +6002,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5997,6 +6010,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6004,6 +6018,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgMediumOfficeNew2004_Chicago_OutputControl.idf b/testfiles/RefBldgMediumOfficeNew2004_Chicago_OutputControl.idf index 2b30d60c3ac..6285d464f5f 100644 --- a/testfiles/RefBldgMediumOfficeNew2004_Chicago_OutputControl.idf +++ b/testfiles/RefBldgMediumOfficeNew2004_Chicago_OutputControl.idf @@ -5907,6 +5907,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5914,6 +5915,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5921,6 +5923,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5928,6 +5931,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5935,6 +5939,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5942,6 +5947,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5949,6 +5955,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5956,6 +5963,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5963,6 +5971,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5970,6 +5979,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5977,6 +5987,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5984,6 +5995,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5991,6 +6003,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5998,6 +6011,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6005,6 +6019,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgMidriseApartmentNew2004_Chicago.idf b/testfiles/RefBldgMidriseApartmentNew2004_Chicago.idf index e224249e2e4..2c02211ff50 100644 --- a/testfiles/RefBldgMidriseApartmentNew2004_Chicago.idf +++ b/testfiles/RefBldgMidriseApartmentNew2004_Chicago.idf @@ -9383,6 +9383,7 @@ G Corridor Thermostat, !- Name G Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G Corridor DualSPSched; !- Control 1 Name @@ -9390,6 +9391,7 @@ G N1 Apartment Thermostat, !- Name G N1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G N1 Apartment DualSPSched; !- Control 1 Name @@ -9397,6 +9399,7 @@ G N2 Apartment Thermostat, !- Name G N2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G N2 Apartment DualSPSched; !- Control 1 Name @@ -9404,6 +9407,7 @@ G NE Apartment Thermostat, !- Name G NE Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G NE Apartment DualSPSched; !- Control 1 Name @@ -9411,6 +9415,7 @@ G NW Apartment Thermostat, !- Name G NW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G NW Apartment DualSPSched; !- Control 1 Name @@ -9418,6 +9423,7 @@ G S1 Apartment Thermostat, !- Name G S1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G S1 Apartment DualSPSched; !- Control 1 Name @@ -9425,6 +9431,7 @@ G S2 Apartment Thermostat, !- Name G S2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G S2 Apartment DualSPSched; !- Control 1 Name @@ -9432,6 +9439,7 @@ G SW Apartment Thermostat, !- Name G SW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type G SW Apartment DualSPSched; !- Control 1 Name @@ -9439,6 +9447,7 @@ M Corridor Thermostat, !- Name M Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M Corridor DualSPSched; !- Control 1 Name @@ -9446,6 +9455,7 @@ M N1 Apartment Thermostat, !- Name M N1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M N1 Apartment DualSPSched; !- Control 1 Name @@ -9453,6 +9463,7 @@ M N2 Apartment Thermostat, !- Name M N2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M N2 Apartment DualSPSched; !- Control 1 Name @@ -9460,6 +9471,7 @@ M NE Apartment Thermostat, !- Name M NE Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M NE Apartment DualSPSched; !- Control 1 Name @@ -9467,6 +9479,7 @@ M NW Apartment Thermostat, !- Name M NW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M NW Apartment DualSPSched; !- Control 1 Name @@ -9474,6 +9487,7 @@ M S1 Apartment Thermostat, !- Name M S1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M S1 Apartment DualSPSched; !- Control 1 Name @@ -9481,6 +9495,7 @@ M S2 Apartment Thermostat, !- Name M S2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M S2 Apartment DualSPSched; !- Control 1 Name @@ -9488,6 +9503,7 @@ M SE Apartment Thermostat, !- Name M SE Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M SE Apartment DualSPSched; !- Control 1 Name @@ -9495,6 +9511,7 @@ M SW Apartment Thermostat, !- Name M SW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type M SW Apartment DualSPSched; !- Control 1 Name @@ -9502,6 +9519,7 @@ Office Thermostat, !- Name Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office DualSPSched; !- Control 1 Name @@ -9509,6 +9527,7 @@ T Corridor Thermostat, !- Name T Corridor, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T Corridor DualSPSched; !- Control 1 Name @@ -9516,6 +9535,7 @@ T N1 Apartment Thermostat, !- Name T N1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T N1 Apartment DualSPSched; !- Control 1 Name @@ -9523,6 +9543,7 @@ T N2 Apartment Thermostat, !- Name T N2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T N2 Apartment DualSPSched; !- Control 1 Name @@ -9530,6 +9551,7 @@ T NE Apartment Thermostat, !- Name T NE Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T NE Apartment DualSPSched; !- Control 1 Name @@ -9537,6 +9559,7 @@ T NW Apartment Thermostat, !- Name T NW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T NW Apartment DualSPSched; !- Control 1 Name @@ -9544,6 +9567,7 @@ T S1 Apartment Thermostat, !- Name T S1 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T S1 Apartment DualSPSched; !- Control 1 Name @@ -9551,6 +9575,7 @@ T S2 Apartment Thermostat, !- Name T S2 Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T S2 Apartment DualSPSched; !- Control 1 Name @@ -9558,6 +9583,7 @@ T SE Apartment Thermostat, !- Name T SE Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T SE Apartment DualSPSched; !- Control 1 Name @@ -9565,6 +9591,7 @@ T SW Apartment Thermostat, !- Name T SW Apartment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type T SW Apartment DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgOutPatientNew2004_Chicago.idf b/testfiles/RefBldgOutPatientNew2004_Chicago.idf index 2b913b34944..73ce4d0be7b 100644 --- a/testfiles/RefBldgOutPatientNew2004_Chicago.idf +++ b/testfiles/RefBldgOutPatientNew2004_Chicago.idf @@ -31455,6 +31455,7 @@ Floor 1 Anesthesia Thermostat, !- Name Floor 1 Anesthesia, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31462,6 +31463,7 @@ Floor 1 Bio Haz Thermostat, !- Name Floor 1 Bio Haz, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31469,6 +31471,7 @@ Floor 1 Cafe Thermostat, !- Name Floor 1 Cafe, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31476,6 +31479,7 @@ Floor 1 Clean Thermostat,!- Name Floor 1 Clean, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31483,6 +31487,7 @@ Floor 1 Clean Work Thermostat, !- Name Floor 1 Clean Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31490,6 +31495,7 @@ Floor 1 Dictation Thermostat, !- Name Floor 1 Dictation, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31497,6 +31503,7 @@ Floor 1 Dressing Room Thermostat, !- Name Floor 1 Dressing Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31504,6 +31511,7 @@ Floor 1 Humid Thermostat,!- Name Floor 1 Humid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31511,6 +31519,7 @@ Floor 1 IT Hall Thermostat, !- Name Floor 1 IT Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31518,6 +31527,7 @@ Floor 1 IT Room Thermostat, !- Name Floor 1 IT Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31525,6 +31535,7 @@ Floor 1 Lobby Hall Thermostat, !- Name Floor 1 Lobby Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31532,6 +31543,7 @@ Floor 1 Lobby Thermostat,!- Name Floor 1 Lobby, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31539,6 +31551,7 @@ Floor 1 Locker Room Hall Thermostat, !- Name Floor 1 Locker Room Hall,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31546,6 +31559,7 @@ Floor 1 Locker Room Thermostat, !- Name Floor 1 Locker Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31553,6 +31567,7 @@ Floor 1 Lounge Thermostat, !- Name Floor 1 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31560,6 +31575,7 @@ Floor 1 MRI Control Room Thermostat, !- Name Floor 1 MRI Control Room,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31567,6 +31583,7 @@ Floor 1 MRI Hall Thermostat, !- Name Floor 1 MRI Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31574,6 +31591,7 @@ Floor 1 MRI Room Thermostat, !- Name Floor 1 MRI Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31581,6 +31599,7 @@ Floor 1 Med Gas Thermostat, !- Name Floor 1 Med Gas, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31588,6 +31607,7 @@ Floor 1 Nourishment Thermostat, !- Name Floor 1 Nourishment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31595,6 +31615,7 @@ Floor 1 Nurse Hall Thermostat, !- Name Floor 1 Nurse Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31602,6 +31623,7 @@ Floor 1 Nurse Station Thermostat, !- Name Floor 1 Nurse Station, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31609,6 +31631,7 @@ Floor 1 Office Thermostat, !- Name Floor 1 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31616,6 +31639,7 @@ Floor 1 Operating Room 1 Thermostat, !- Name Floor 1 Operating Room 1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Operating Room DualSPSched; !- Control 1 Name @@ -31623,6 +31647,7 @@ Floor 1 Operating Room 2 Thermostat, !- Name Floor 1 Operating Room 2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Operating Room DualSPSched; !- Control 1 Name @@ -31630,6 +31655,7 @@ Floor 1 Operating Room 3 Thermostat, !- Name Floor 1 Operating Room 3,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Operating Room DualSPSched; !- Control 1 Name @@ -31637,6 +31663,7 @@ Floor 1 PACU Thermostat, !- Name Floor 1 PACU, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31644,6 +31671,7 @@ Floor 1 Pre-Op Hall Thermostat, !- Name Floor 1 Pre-Op Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31651,6 +31679,7 @@ Floor 1 Pre-Op Room 1 Thermostat, !- Name Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31658,6 +31687,7 @@ Floor 1 Pre-Op Room 2 Thermostat, !- Name Floor 1 Pre-Op Room 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31665,6 +31695,7 @@ Floor 1 Procedure Room Thermostat, !- Name Floor 1 Procedure Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31672,6 +31703,7 @@ Floor 1 Reception Hall Thermostat, !- Name Floor 1 Reception Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31679,6 +31711,7 @@ Floor 1 Reception Thermostat, !- Name Floor 1 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31686,6 +31719,7 @@ Floor 1 Recovery Room Thermostat, !- Name Floor 1 Recovery Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31693,6 +31727,7 @@ Floor 1 Scheduling Thermostat, !- Name Floor 1 Scheduling, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31700,6 +31735,7 @@ Floor 1 Scrub Thermostat,!- Name Floor 1 Scrub, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31707,6 +31743,7 @@ Floor 1 Soil Hold Thermostat, !- Name Floor 1 Soil Hold, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31714,6 +31751,7 @@ Floor 1 Soil Thermostat, !- Name Floor 1 Soil, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31721,6 +31759,7 @@ Floor 1 Soil Work Thermostat, !- Name Floor 1 Soil Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31728,6 +31767,7 @@ Floor 1 Step Down Thermostat, !- Name Floor 1 Step Down, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31735,6 +31775,7 @@ Floor 1 Sterile Hall Thermostat, !- Name Floor 1 Sterile Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31742,6 +31783,7 @@ Floor 1 Sterile Storage Thermostat, !- Name Floor 1 Sterile Storage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31749,6 +31791,7 @@ Floor 1 Sub-Sterile Thermostat, !- Name Floor 1 Sub-Sterile, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31756,6 +31799,7 @@ Floor 1 Utility Hall Thermostat, !- Name Floor 1 Utility Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31763,6 +31807,7 @@ Floor 1 Vestibule Thermostat, !- Name Floor 1 Vestibule, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31770,6 +31815,7 @@ Floor 2 Conference Thermostat, !- Name Floor 2 Conference, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31777,6 +31823,7 @@ Floor 2 Dictation Thermostat, !- Name Floor 2 Dictation, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31784,6 +31831,7 @@ Floor 2 Exam 1 Thermostat, !- Name Floor 2 Exam 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31791,6 +31839,7 @@ Floor 2 Exam 2 Thermostat, !- Name Floor 2 Exam 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31798,6 +31847,7 @@ Floor 2 Exam 3 Thermostat, !- Name Floor 2 Exam 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31805,6 +31855,7 @@ Floor 2 Exam 4 Thermostat, !- Name Floor 2 Exam 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31812,6 +31863,7 @@ Floor 2 Exam 5 Thermostat, !- Name Floor 2 Exam 5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31819,6 +31871,7 @@ Floor 2 Exam 6 Thermostat, !- Name Floor 2 Exam 6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31826,6 +31879,7 @@ Floor 2 Exam 7 Thermostat, !- Name Floor 2 Exam 7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31833,6 +31887,7 @@ Floor 2 Exam 8 Thermostat, !- Name Floor 2 Exam 8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31840,6 +31895,7 @@ Floor 2 Exam 9 Thermostat, !- Name Floor 2 Exam 9, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31847,6 +31903,7 @@ Floor 2 Exam Hall 1 Thermostat, !- Name Floor 2 Exam Hall 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31854,6 +31911,7 @@ Floor 2 Exam Hall 2 Thermostat, !- Name Floor 2 Exam Hall 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31861,6 +31919,7 @@ Floor 2 Exam Hall 3 Thermostat, !- Name Floor 2 Exam Hall 3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31868,6 +31927,7 @@ Floor 2 Exam Hall 4 Thermostat, !- Name Floor 2 Exam Hall 4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31875,6 +31935,7 @@ Floor 2 Exam Hall 5 Thermostat, !- Name Floor 2 Exam Hall 5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31882,6 +31943,7 @@ Floor 2 Exam Hall 6 Thermostat, !- Name Floor 2 Exam Hall 6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31889,6 +31951,7 @@ Floor 2 Lounge Thermostat, !- Name Floor 2 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31896,6 +31959,7 @@ Floor 2 Nurse Station 1 Thermostat, !- Name Floor 2 Nurse Station 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31903,6 +31967,7 @@ Floor 2 Nurse Station 2 Thermostat, !- Name Floor 2 Nurse Station 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31910,6 +31975,7 @@ Floor 2 Office Hall Thermostat, !- Name Floor 2 Office Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31917,6 +31983,7 @@ Floor 2 Office Thermostat, !- Name Floor 2 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31924,6 +31991,7 @@ Floor 2 Reception Hall Thermostat, !- Name Floor 2 Reception Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31931,6 +31999,7 @@ Floor 2 Reception Thermostat, !- Name Floor 2 Reception, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31938,6 +32007,7 @@ Floor 2 Scheduling 1 Thermostat, !- Name Floor 2 Scheduling 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31945,6 +32015,7 @@ Floor 2 Scheduling 2 Thermostat, !- Name Floor 2 Scheduling 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31952,6 +32023,7 @@ Floor 2 Work Hall Thermostat, !- Name Floor 2 Work Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31959,6 +32031,7 @@ Floor 2 Work Thermostat, !- Name Floor 2 Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31966,6 +32039,7 @@ Floor 2 X-Ray Thermostat,!- Name Floor 2 X-Ray, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31973,6 +32047,7 @@ Floor 3 Dressing Room Thermostat, !- Name Floor 3 Dressing Room, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31980,6 +32055,7 @@ Floor 3 Elevator Hall Thermostat, !- Name Floor 3 Elevator Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31987,6 +32063,7 @@ Floor 3 Humid Thermostat,!- Name Floor 3 Humid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -31994,6 +32071,7 @@ Floor 3 Locker Thermostat, !- Name Floor 3 Locker, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32001,6 +32079,7 @@ Floor 3 Lounge Thermostat, !- Name Floor 3 Lounge, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32008,6 +32087,7 @@ Floor 3 Mechanical Hall Thermostat, !- Name Floor 3 Mechanical Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32015,6 +32095,7 @@ Floor 3 Office Hall Thermostat, !- Name Floor 3 Office Hall, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32022,6 +32103,7 @@ Floor 3 Office Thermostat, !- Name Floor 3 Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32029,6 +32111,7 @@ Floor 3 Physical Therapy 1 Thermostat, !- Name Floor 3 Physical Therapy 1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32036,6 +32119,7 @@ Floor 3 Physical Therapy 2 Thermostat, !- Name Floor 3 Physical Therapy 2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32043,6 +32127,7 @@ Floor 3 Treatment Thermostat, !- Name Floor 3 Treatment, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name @@ -32050,6 +32135,7 @@ Floor 3 Work Thermostat, !- Name Floor 3 Work, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Typical DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgPrimarySchoolNew2004_Chicago.idf b/testfiles/RefBldgPrimarySchoolNew2004_Chicago.idf index 1d69fc0f317..3c5881a6677 100644 --- a/testfiles/RefBldgPrimarySchoolNew2004_Chicago.idf +++ b/testfiles/RefBldgPrimarySchoolNew2004_Chicago.idf @@ -9178,6 +9178,7 @@ Bath_ZN_1_FLR_1 Thermostat, !- Name Bath_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bath_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9185,6 +9186,7 @@ Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9192,6 +9194,7 @@ Computer_Class_ZN_1_FLR_1 Thermostat, !- Name Computer_Class_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Computer_Class_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9199,6 +9202,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9206,6 +9210,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9213,6 +9218,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9220,6 +9226,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9227,6 +9234,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9234,6 +9242,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9241,6 +9250,7 @@ Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9248,6 +9258,7 @@ Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9255,6 +9266,7 @@ Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9262,6 +9274,7 @@ Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9269,6 +9282,7 @@ Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9276,6 +9290,7 @@ Library_Media_Center_ZN_1_FLR_1 Thermostat, !- Name Library_Media_Center_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Library_Media_Center_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9283,6 +9298,7 @@ Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9290,6 +9306,7 @@ Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9297,6 +9314,7 @@ Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9304,6 +9322,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9311,6 +9330,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9318,6 +9338,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9325,6 +9346,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9332,6 +9354,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9339,6 +9362,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -9346,6 +9370,7 @@ Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgQuickServiceRestaurantNew2004_Chicago.idf b/testfiles/RefBldgQuickServiceRestaurantNew2004_Chicago.idf index b53a26b8133..3c95b3d7c73 100644 --- a/testfiles/RefBldgQuickServiceRestaurantNew2004_Chicago.idf +++ b/testfiles/RefBldgQuickServiceRestaurantNew2004_Chicago.idf @@ -1569,6 +1569,7 @@ Dining Thermostat, !- Name Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining DualSPSched; !- Control 1 Name @@ -1576,6 +1577,7 @@ Kitchen Thermostat, !- Name Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgSecondarySchoolNew2004_Chicago.idf b/testfiles/RefBldgSecondarySchoolNew2004_Chicago.idf index 4696749cd09..81ede7e13fa 100644 --- a/testfiles/RefBldgSecondarySchoolNew2004_Chicago.idf +++ b/testfiles/RefBldgSecondarySchoolNew2004_Chicago.idf @@ -17246,6 +17246,7 @@ Auditorium_ZN_1_FLR_1 Thermostat, !- Name Auditorium_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Auditorium_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17253,6 +17254,7 @@ Aux_Gym_ZN_1_FLR_1 Thermostat, !- Name Aux_Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Aux_Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17260,6 +17262,7 @@ Bathrooms_ZN_1_FLR_1 Thermostat, !- Name Bathrooms_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17267,6 +17270,7 @@ Bathrooms_ZN_1_FLR_2 Thermostat, !- Name Bathrooms_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bathrooms_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17274,6 +17278,7 @@ Cafeteria_ZN_1_FLR_1 Thermostat, !- Name Cafeteria_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Cafeteria_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17281,6 +17286,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17288,6 +17294,7 @@ Corner_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17295,6 +17302,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17302,6 +17310,7 @@ Corner_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17309,6 +17318,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17316,6 +17326,7 @@ Corner_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17323,6 +17334,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17330,6 +17342,7 @@ Corner_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17337,6 +17350,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17344,6 +17358,7 @@ Corner_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17351,6 +17366,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17358,6 +17374,7 @@ Corner_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corner_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corner_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17365,6 +17382,7 @@ Corridor_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17372,6 +17390,7 @@ Corridor_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17379,6 +17398,7 @@ Corridor_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17386,6 +17406,7 @@ Corridor_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17393,6 +17414,7 @@ Corridor_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17400,6 +17422,7 @@ Corridor_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Corridor_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Corridor_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17407,6 +17430,7 @@ Gym_ZN_1_FLR_1 Thermostat, !- Name Gym_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Gym_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17414,6 +17438,7 @@ Kitchen_ZN_1_FLR_1 Thermostat, !- Name Kitchen_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17421,6 +17446,7 @@ LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 Thermostat, !- Name LIBRARY_MEDIA_CENTER_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LIBRARY_MEDIA_CENTER_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17428,6 +17454,7 @@ Lobby_ZN_1_FLR_1 Thermostat, !- Name Lobby_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17435,6 +17462,7 @@ Lobby_ZN_1_FLR_2 Thermostat, !- Name Lobby_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Lobby_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17442,6 +17470,7 @@ Main_Corridor_ZN_1_FLR_1 Thermostat, !- Name Main_Corridor_ZN_1_FLR_1,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17449,6 +17478,7 @@ Main_Corridor_ZN_1_FLR_2 Thermostat, !- Name Main_Corridor_ZN_1_FLR_2,!- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Main_Corridor_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17456,6 +17486,7 @@ Mech_ZN_1_FLR_1 Thermostat, !- Name Mech_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17463,6 +17494,7 @@ Mech_ZN_1_FLR_2 Thermostat, !- Name Mech_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mech_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17470,6 +17502,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17477,6 +17510,7 @@ Mult_Class_1_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17484,6 +17518,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17491,6 +17526,7 @@ Mult_Class_1_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17498,6 +17534,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17505,6 +17542,7 @@ Mult_Class_1_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_1_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_1_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17512,6 +17550,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17519,6 +17558,7 @@ Mult_Class_2_Pod_1_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_1_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_1_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17526,6 +17566,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17533,6 +17574,7 @@ Mult_Class_2_Pod_2_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_2_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_2_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17540,6 +17582,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_1 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17547,6 +17590,7 @@ Mult_Class_2_Pod_3_ZN_1_FLR_2 Thermostat, !- Name Mult_Class_2_Pod_3_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Mult_Class_2_Pod_3_ZN_1_FLR_2 DualSPSched; !- Control 1 Name @@ -17554,6 +17598,7 @@ Offices_ZN_1_FLR_1 Thermostat, !- Name Offices_ZN_1_FLR_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_1 DualSPSched; !- Control 1 Name @@ -17561,6 +17606,7 @@ Offices_ZN_1_FLR_2 Thermostat, !- Name Offices_ZN_1_FLR_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Offices_ZN_1_FLR_2 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgSmallHotelNew2004_Chicago.idf b/testfiles/RefBldgSmallHotelNew2004_Chicago.idf index 82d50e59bee..ea7c56ff1f1 100644 --- a/testfiles/RefBldgSmallHotelNew2004_Chicago.idf +++ b/testfiles/RefBldgSmallHotelNew2004_Chicago.idf @@ -22672,6 +22672,7 @@ CorridorFlr1 Thermostat, !- Name CorridorFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr1 DualSPSched;!- Control 1 Name @@ -22679,6 +22680,7 @@ CorridorFlr2 Thermostat, !- Name CorridorFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr2 DualSPSched;!- Control 1 Name @@ -22686,6 +22688,7 @@ CorridorFlr3 Thermostat, !- Name CorridorFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr3 DualSPSched;!- Control 1 Name @@ -22693,6 +22696,7 @@ CorridorFlr4 Thermostat, !- Name CorridorFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type CorridorFlr4 DualSPSched;!- Control 1 Name @@ -22700,6 +22704,7 @@ EmployeeLoungeFlr1 Thermostat, !- Name EmployeeLoungeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type EmployeeLoungeFlr1 DualSPSched; !- Control 1 Name @@ -22707,6 +22712,7 @@ ExerciseCenterFlr1 Thermostat, !- Name ExerciseCenterFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ExerciseCenterFlr1 DualSPSched; !- Control 1 Name @@ -22714,6 +22720,7 @@ FrontLoungeFlr1 Thermostat, !- Name FrontLoungeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontLoungeFlr1 DualSPSched; !- Control 1 Name @@ -22721,6 +22728,7 @@ FrontOfficeFlr1 Thermostat, !- Name FrontOfficeFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontOfficeFlr1 DualSPSched; !- Control 1 Name @@ -22728,6 +22736,7 @@ FrontStairsFlr1 Thermostat, !- Name FrontStairsFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr1 DualSPSched; !- Control 1 Name @@ -22735,6 +22744,7 @@ FrontStairsFlr2 Thermostat, !- Name FrontStairsFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr2 DualSPSched; !- Control 1 Name @@ -22742,6 +22752,7 @@ FrontStairsFlr3 Thermostat, !- Name FrontStairsFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr3 DualSPSched; !- Control 1 Name @@ -22749,6 +22760,7 @@ FrontStairsFlr4 Thermostat, !- Name FrontStairsFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStairsFlr4 DualSPSched; !- Control 1 Name @@ -22756,6 +22768,7 @@ FrontStorageFlr1 Thermostat, !- Name FrontStorageFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr1 DualSPSched; !- Control 1 Name @@ -22763,6 +22776,7 @@ FrontStorageFlr2 Thermostat, !- Name FrontStorageFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr2 DualSPSched; !- Control 1 Name @@ -22770,6 +22784,7 @@ FrontStorageFlr3 Thermostat, !- Name FrontStorageFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr3 DualSPSched; !- Control 1 Name @@ -22777,6 +22792,7 @@ FrontStorageFlr4 Thermostat, !- Name FrontStorageFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FrontStorageFlr4 DualSPSched; !- Control 1 Name @@ -22784,6 +22800,7 @@ GuestRoom101 Thermostat, !- Name GuestRoom101, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom101 DualSPSched;!- Control 1 Name @@ -22791,6 +22808,7 @@ GuestRoom102 Thermostat, !- Name GuestRoom102, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom102 DualSPSched;!- Control 1 Name @@ -22798,6 +22816,7 @@ GuestRoom103 Thermostat, !- Name GuestRoom103, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom103 DualSPSched;!- Control 1 Name @@ -22805,6 +22824,7 @@ GuestRoom104 Thermostat, !- Name GuestRoom104, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom104 DualSPSched;!- Control 1 Name @@ -22812,6 +22832,7 @@ GuestRoom105 Thermostat, !- Name GuestRoom105, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom105 DualSPSched;!- Control 1 Name @@ -22819,6 +22840,7 @@ GuestRoom201 Thermostat, !- Name GuestRoom201, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom201 DualSPSched;!- Control 1 Name @@ -22826,6 +22848,7 @@ GuestRoom202_205 Thermostat, !- Name GuestRoom202_205, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom202_205 DualSPSched; !- Control 1 Name @@ -22833,6 +22856,7 @@ GuestRoom206_208 Thermostat, !- Name GuestRoom206_208, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom206_208 DualSPSched; !- Control 1 Name @@ -22840,6 +22864,7 @@ GuestRoom209_212 Thermostat, !- Name GuestRoom209_212, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom209_212 DualSPSched; !- Control 1 Name @@ -22847,6 +22872,7 @@ GuestRoom213 Thermostat, !- Name GuestRoom213, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom213 DualSPSched;!- Control 1 Name @@ -22854,6 +22880,7 @@ GuestRoom214 Thermostat, !- Name GuestRoom214, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom214 DualSPSched;!- Control 1 Name @@ -22861,6 +22888,7 @@ GuestRoom215_218 Thermostat, !- Name GuestRoom215_218, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom215_218 DualSPSched; !- Control 1 Name @@ -22868,6 +22896,7 @@ GuestRoom219 Thermostat, !- Name GuestRoom219, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom219 DualSPSched;!- Control 1 Name @@ -22875,6 +22904,7 @@ GuestRoom220_223 Thermostat, !- Name GuestRoom220_223, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom220_223 DualSPSched; !- Control 1 Name @@ -22882,6 +22912,7 @@ GuestRoom224 Thermostat, !- Name GuestRoom224, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom224 DualSPSched;!- Control 1 Name @@ -22889,6 +22920,7 @@ GuestRoom301 Thermostat, !- Name GuestRoom301, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom301 DualSPSched;!- Control 1 Name @@ -22896,6 +22928,7 @@ GuestRoom302_305 Thermostat, !- Name GuestRoom302_305, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom302_305 DualSPSched; !- Control 1 Name @@ -22903,6 +22936,7 @@ GuestRoom306_308 Thermostat, !- Name GuestRoom306_308, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom306_308 DualSPSched; !- Control 1 Name @@ -22910,6 +22944,7 @@ GuestRoom309_312 Thermostat, !- Name GuestRoom309_312, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom309_312 DualSPSched; !- Control 1 Name @@ -22917,6 +22952,7 @@ GuestRoom313 Thermostat, !- Name GuestRoom313, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom313 DualSPSched;!- Control 1 Name @@ -22924,6 +22960,7 @@ GuestRoom314 Thermostat, !- Name GuestRoom314, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom314 DualSPSched;!- Control 1 Name @@ -22931,6 +22968,7 @@ GuestRoom315_318 Thermostat, !- Name GuestRoom315_318, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom315_318 DualSPSched; !- Control 1 Name @@ -22938,6 +22976,7 @@ GuestRoom319 Thermostat, !- Name GuestRoom319, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom319 DualSPSched;!- Control 1 Name @@ -22945,6 +22984,7 @@ GuestRoom320_323 Thermostat, !- Name GuestRoom320_323, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom320_323 DualSPSched; !- Control 1 Name @@ -22952,6 +22992,7 @@ GuestRoom324 Thermostat, !- Name GuestRoom324, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom324 DualSPSched;!- Control 1 Name @@ -22959,6 +23000,7 @@ GuestRoom401 Thermostat, !- Name GuestRoom401, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom401 DualSPSched;!- Control 1 Name @@ -22966,6 +23008,7 @@ GuestRoom402_405 Thermostat, !- Name GuestRoom402_405, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom402_405 DualSPSched; !- Control 1 Name @@ -22973,6 +23016,7 @@ GuestRoom406_408 Thermostat, !- Name GuestRoom406_408, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom406_408 DualSPSched; !- Control 1 Name @@ -22980,6 +23024,7 @@ GuestRoom409_412 Thermostat, !- Name GuestRoom409_412, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom409_412 DualSPSched; !- Control 1 Name @@ -22987,6 +23032,7 @@ GuestRoom413 Thermostat, !- Name GuestRoom413, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom413 DualSPSched;!- Control 1 Name @@ -22994,6 +23040,7 @@ GuestRoom414 Thermostat, !- Name GuestRoom414, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom414 DualSPSched;!- Control 1 Name @@ -23001,6 +23048,7 @@ GuestRoom415_418 Thermostat, !- Name GuestRoom415_418, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom415_418 DualSPSched; !- Control 1 Name @@ -23008,6 +23056,7 @@ GuestRoom419 Thermostat, !- Name GuestRoom419, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom419 DualSPSched;!- Control 1 Name @@ -23015,6 +23064,7 @@ GuestRoom420_423 Thermostat, !- Name GuestRoom420_423, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom420_423 DualSPSched; !- Control 1 Name @@ -23022,6 +23072,7 @@ GuestRoom424 Thermostat, !- Name GuestRoom424, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type GuestRoom424 DualSPSched;!- Control 1 Name @@ -23029,6 +23080,7 @@ LaundryRoomFlr1 Thermostat, !- Name LaundryRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LaundryRoomFlr1 DualSPSched; !- Control 1 Name @@ -23036,6 +23088,7 @@ MechanicalRoomFlr1 Thermostat, !- Name MechanicalRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MechanicalRoomFlr1 DualSPSched; !- Control 1 Name @@ -23043,6 +23096,7 @@ MeetingRoomFlr1 Thermostat, !- Name MeetingRoomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type MeetingRoomFlr1 DualSPSched; !- Control 1 Name @@ -23050,6 +23104,7 @@ RearStairsFlr1 Thermostat, !- Name RearStairsFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr1 DualSPSched; !- Control 1 Name @@ -23057,6 +23112,7 @@ RearStairsFlr2 Thermostat, !- Name RearStairsFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr2 DualSPSched; !- Control 1 Name @@ -23064,6 +23120,7 @@ RearStairsFlr3 Thermostat, !- Name RearStairsFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr3 DualSPSched; !- Control 1 Name @@ -23071,6 +23128,7 @@ RearStairsFlr4 Thermostat, !- Name RearStairsFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStairsFlr4 DualSPSched; !- Control 1 Name @@ -23078,6 +23136,7 @@ RearStorageFlr1 Thermostat, !- Name RearStorageFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr1 DualSPSched; !- Control 1 Name @@ -23085,6 +23144,7 @@ RearStorageFlr2 Thermostat, !- Name RearStorageFlr2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr2 DualSPSched; !- Control 1 Name @@ -23092,6 +23152,7 @@ RearStorageFlr3 Thermostat, !- Name RearStorageFlr3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr3 DualSPSched; !- Control 1 Name @@ -23099,6 +23160,7 @@ RearStorageFlr4 Thermostat, !- Name RearStorageFlr4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RearStorageFlr4 DualSPSched; !- Control 1 Name @@ -23106,6 +23168,7 @@ RestroomFlr1 Thermostat, !- Name RestroomFlr1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type RestroomFlr1 DualSPSched;!- Control 1 Name diff --git a/testfiles/RefBldgSmallOfficeNew2004_Chicago.idf b/testfiles/RefBldgSmallOfficeNew2004_Chicago.idf index f16158e4cf0..28d2ad5b5fa 100644 --- a/testfiles/RefBldgSmallOfficeNew2004_Chicago.idf +++ b/testfiles/RefBldgSmallOfficeNew2004_Chicago.idf @@ -2690,6 +2690,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2697,6 +2698,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2704,6 +2706,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2711,6 +2714,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2718,6 +2722,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgStand-aloneRetailNew2004_Chicago.idf b/testfiles/RefBldgStand-aloneRetailNew2004_Chicago.idf index df7b8654661..0db55933e50 100644 --- a/testfiles/RefBldgStand-aloneRetailNew2004_Chicago.idf +++ b/testfiles/RefBldgStand-aloneRetailNew2004_Chicago.idf @@ -2304,6 +2304,7 @@ Back_Space Thermostat, !- Name Back_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Back_Space DualSPSched; !- Control 1 Name @@ -2311,6 +2312,7 @@ Core_Retail Thermostat, !- Name Core_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_Retail DualSPSched; !- Control 1 Name @@ -2318,6 +2320,7 @@ Front_Entry Thermostat, !- Name Front_Entry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Entry DualSPSched; !- Control 1 Name @@ -2325,6 +2328,7 @@ Front_Retail Thermostat, !- Name Front_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Retail DualSPSched;!- Control 1 Name @@ -2332,6 +2336,7 @@ Point_Of_Sale Thermostat,!- Name Point_Of_Sale, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Point_Of_Sale DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgStripMallNew2004_Chicago.idf b/testfiles/RefBldgStripMallNew2004_Chicago.idf index feeba31faed..f537ff0783a 100644 --- a/testfiles/RefBldgStripMallNew2004_Chicago.idf +++ b/testfiles/RefBldgStripMallNew2004_Chicago.idf @@ -4306,6 +4306,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -4313,6 +4314,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -4320,6 +4322,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -4327,6 +4330,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -4334,6 +4338,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -4341,6 +4346,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -4348,6 +4354,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -4355,6 +4362,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -4362,6 +4370,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -4369,6 +4378,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgSuperMarketNew2004_Chicago.idf b/testfiles/RefBldgSuperMarketNew2004_Chicago.idf index de537cfbeb0..541c88698af 100644 --- a/testfiles/RefBldgSuperMarketNew2004_Chicago.idf +++ b/testfiles/RefBldgSuperMarketNew2004_Chicago.idf @@ -2638,6 +2638,7 @@ Bakery Thermostat, !- Name Bakery, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Bakery DualSPSched; !- Control 1 Name @@ -2645,6 +2646,7 @@ Deli Thermostat, !- Name Deli, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Deli DualSPSched; !- Control 1 Name @@ -2652,6 +2654,7 @@ DryStorage Thermostat, !- Name DryStorage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DryStorage DualSPSched; !- Control 1 Name @@ -2659,6 +2662,7 @@ Office Thermostat, !- Name Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office DualSPSched; !- Control 1 Name @@ -2666,6 +2670,7 @@ Produce Thermostat, !- Name Produce, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Produce DualSPSched; !- Control 1 Name @@ -2673,6 +2678,7 @@ Sales Thermostat, !- Name Sales, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Sales DualSPSched; !- Control 1 Name diff --git a/testfiles/RefBldgWarehouseNew2004_Chicago.idf b/testfiles/RefBldgWarehouseNew2004_Chicago.idf index ba9cfd8c761..0106d10a5a6 100644 --- a/testfiles/RefBldgWarehouseNew2004_Chicago.idf +++ b/testfiles/RefBldgWarehouseNew2004_Chicago.idf @@ -1819,6 +1819,7 @@ BulkStorage Thermostat, !- Name BulkStorage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type BulkStorage DualSPSched; !- Control 1 Name @@ -1826,6 +1827,7 @@ FineStorage Thermostat, !- Name FineStorage, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type FineStorage DualSPSched; !- Control 1 Name @@ -1833,6 +1835,7 @@ Office Thermostat, !- Name Office, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Office DualSPSched; !- Control 1 Name diff --git a/testfiles/RefMedOffVAVAllDefVRP.idf b/testfiles/RefMedOffVAVAllDefVRP.idf index 4e1cc49d2c0..ded4bfbe1ad 100644 --- a/testfiles/RefMedOffVAVAllDefVRP.idf +++ b/testfiles/RefMedOffVAVAllDefVRP.idf @@ -5897,6 +5897,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5904,6 +5905,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5911,6 +5913,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5918,6 +5921,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5925,6 +5929,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5932,6 +5937,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5939,6 +5945,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -5946,6 +5953,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -5953,6 +5961,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -5960,6 +5969,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -5967,6 +5977,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -5974,6 +5985,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -5981,6 +5993,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -5988,6 +6001,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -5995,6 +6009,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ReflectiveAdjacentBuilding.idf b/testfiles/ReflectiveAdjacentBuilding.idf index 55cbb99ac97..12789453ed9 100644 --- a/testfiles/ReflectiveAdjacentBuilding.idf +++ b/testfiles/ReflectiveAdjacentBuilding.idf @@ -1084,6 +1084,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1093,6 +1094,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1102,6 +1104,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/RefrigeratedWarehouse.idf b/testfiles/RefrigeratedWarehouse.idf index 04ac69ebea4..ff514e24745 100644 --- a/testfiles/RefrigeratedWarehouse.idf +++ b/testfiles/RefrigeratedWarehouse.idf @@ -5389,6 +5389,7 @@ SubFreezer Thermostat, !- Name SubFreezer, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Blast Freeze; !- Control 1 Name @@ -5426,6 +5427,7 @@ Freezer_1 Thermostat, !- Name Freezer_1, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Freeze; !- Control 1 Name @@ -5472,6 +5474,7 @@ Freezer_2 Thermostat, !- Name Freezer_2, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Freeze; !- Control 1 Name @@ -5509,6 +5512,7 @@ Freezer_3 Thermostat, !- Name Freezer_3, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Freeze; !- Control 1 Name @@ -5546,6 +5550,7 @@ Freezer_4 Thermostat, !- Name Freezer_4, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Freeze; !- Control 1 Name @@ -5583,6 +5588,7 @@ Freezer_5 Thermostat, !- Name Freezer_5, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Freeze; !- Control 1 Name @@ -5626,6 +5632,7 @@ Cooler_1 Thermostat, !- Name Cooler_1, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Cooler; !- Control 1 Name @@ -5707,6 +5714,7 @@ Cooler_2 Thermostat, !- Name Cooler_2, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Cooler; !- Control 1 Name @@ -5784,6 +5792,7 @@ Cooler_3 Thermostat, !- Name Cooler_3, !- Zone or ZoneList Name Zone Control Type Sched Dual YearRound, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Cooler; !- Control 1 Name @@ -5861,6 +5870,7 @@ Dock Thermostat, !- Name Dock, !- Zone or ZoneList Name Zone Control Type Sched for SinglePointSeasonal, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint Dock, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -5978,6 +5988,7 @@ Office1_Lower Thermostat,!- Name Office1_Lower, !- Zone or ZoneList Name Zone Control Type Sched for SinglePointSeasonal, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint Office, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -6038,6 +6049,7 @@ Office1_Upper Thermostat,!- Name Office1_Upper, !- Zone or ZoneList Name Zone Control Type Sched for SinglePointSeasonal, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint Office, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -6098,6 +6110,7 @@ Office2_Lower Thermostat,!- Name Office2_Lower, !- Zone or ZoneList Name Zone Control Type Sched for SinglePointSeasonal, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint Office, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -6158,6 +6171,7 @@ Office2_Upper Thermostat,!- Name Office2_Upper, !- Zone or ZoneList Name Zone Control Type Sched for SinglePointSeasonal, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint Office, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ReliefIndEvapCoolerRTUoffice.idf b/testfiles/ReliefIndEvapCoolerRTUoffice.idf index acd91a0c482..9516796ae57 100644 --- a/testfiles/ReliefIndEvapCoolerRTUoffice.idf +++ b/testfiles/ReliefIndEvapCoolerRTUoffice.idf @@ -4056,6 +4056,7 @@ ZN1 Thermostat, !- Name ZN1_Fl1_S_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4416,6 +4417,7 @@ ZN3 Thermostat, !- Name ZN3_Fl1_E_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4776,6 +4778,7 @@ ZN5 Thermostat, !- Name ZN5_Fl1_W_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5136,6 +5139,7 @@ ZN7 Thermostat, !- Name ZN7_fl1_N_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5496,6 +5500,7 @@ ZN9 Thermostat, !- Name ZN9_Fl1_Core_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5856,6 +5861,7 @@ ZN11 Thermostat, !- Name ZN11_Fl2_S_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6216,6 +6222,7 @@ ZN13 Thermostat, !- Name ZN13_Fl2_E_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6576,6 +6583,7 @@ ZN15 Thermostat, !- Name ZN15_Fl2_W_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -6936,6 +6944,7 @@ ZN17 Thermostat, !- Name ZN17_Fl2_N_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -7296,6 +7305,7 @@ ZN19 Thermostat, !- Name ZN19_Fl2_Core_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/ReportDaylightFactors.idf b/testfiles/ReportDaylightFactors.idf index 28260d228d8..d44f36b99ec 100644 --- a/testfiles/ReportDaylightFactors.idf +++ b/testfiles/ReportDaylightFactors.idf @@ -6302,6 +6302,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -6309,6 +6310,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -6316,6 +6318,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -6323,6 +6326,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -6330,6 +6334,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -6337,6 +6342,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -6344,6 +6350,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6351,6 +6358,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6358,6 +6366,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6365,6 +6374,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6372,6 +6382,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6379,6 +6390,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6386,6 +6398,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6393,6 +6406,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6400,6 +6414,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ReportHeatEmission_RefFSRestaurant.idf b/testfiles/ReportHeatEmission_RefFSRestaurant.idf index 0b78cea2250..e55d1182615 100644 --- a/testfiles/ReportHeatEmission_RefFSRestaurant.idf +++ b/testfiles/ReportHeatEmission_RefFSRestaurant.idf @@ -1603,6 +1603,7 @@ Dining Thermostat, !- Name Dining, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dining DualSPSched; !- Control 1 Name @@ -1610,6 +1611,7 @@ Kitchen Thermostat, !- Name Kitchen, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Kitchen DualSPSched; !- Control 1 Name diff --git a/testfiles/RetailPackagedTESCoil.idf b/testfiles/RetailPackagedTESCoil.idf index 6555fb40da3..1efce5df532 100644 --- a/testfiles/RetailPackagedTESCoil.idf +++ b/testfiles/RetailPackagedTESCoil.idf @@ -2170,6 +2170,7 @@ Back_Space Thermostat, !- Name Back_Space, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Back_Space DualSPSched; !- Control 1 Name @@ -2177,6 +2178,7 @@ Core_Retail Thermostat, !- Name Core_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_Retail DualSPSched; !- Control 1 Name @@ -2184,6 +2186,7 @@ Front_Entry Thermostat, !- Name Front_Entry, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Entry DualSPSched; !- Control 1 Name @@ -2191,6 +2194,7 @@ Front_Retail Thermostat, !- Name Front_Retail, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Front_Retail DualSPSched;!- Control 1 Name @@ -2198,6 +2202,7 @@ Point_Of_Sale Thermostat,!- Name Point_Of_Sale, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Point_Of_Sale DualSPSched; !- Control 1 Name diff --git a/testfiles/RoomAirflowNetwork.idf b/testfiles/RoomAirflowNetwork.idf index 93c28bec129..7e07dd4f8ef 100644 --- a/testfiles/RoomAirflowNetwork.idf +++ b/testfiles/RoomAirflowNetwork.idf @@ -2492,6 +2492,7 @@ NORTH_ZONE Thermostat, !- Name NORTH_ZONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/SeriesActiveBranch.idf b/testfiles/SeriesActiveBranch.idf index 63e76c1e7e6..67f84e30812 100644 --- a/testfiles/SeriesActiveBranch.idf +++ b/testfiles/SeriesActiveBranch.idf @@ -2250,6 +2250,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2261,6 +2262,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2272,6 +2274,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2283,6 +2286,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2294,6 +2298,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/ShopWithBIPVT.idf b/testfiles/ShopWithBIPVT.idf index 74d12498799..c96d50f2855 100644 --- a/testfiles/ShopWithBIPVT.idf +++ b/testfiles/ShopWithBIPVT.idf @@ -1275,6 +1275,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1695,6 +1696,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2115,6 +2117,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2535,6 +2538,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -2908,6 +2912,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/ShopWithPVandBattery.idf b/testfiles/ShopWithPVandBattery.idf index b89273648db..1a3193639b5 100644 --- a/testfiles/ShopWithPVandBattery.idf +++ b/testfiles/ShopWithPVandBattery.idf @@ -1301,6 +1301,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1694,6 +1695,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2087,6 +2089,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2480,6 +2483,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -2858,6 +2862,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/ShopWithPVandLiIonBattery.idf b/testfiles/ShopWithPVandLiIonBattery.idf index acf51546ca0..0155a1232b3 100644 --- a/testfiles/ShopWithPVandLiIonBattery.idf +++ b/testfiles/ShopWithPVandLiIonBattery.idf @@ -1301,6 +1301,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1694,6 +1695,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2087,6 +2089,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2480,6 +2483,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -2858,6 +2862,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/ShopWithPVandStorage.idf b/testfiles/ShopWithPVandStorage.idf index 16c49548e01..6f5d8215454 100644 --- a/testfiles/ShopWithPVandStorage.idf +++ b/testfiles/ShopWithPVandStorage.idf @@ -1300,6 +1300,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1693,6 +1694,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2086,6 +2088,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2479,6 +2482,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -2857,6 +2861,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/ShopWithSimplePVT.idf b/testfiles/ShopWithSimplePVT.idf index 1eb01b4f3c9..76235614125 100644 --- a/testfiles/ShopWithSimplePVT.idf +++ b/testfiles/ShopWithSimplePVT.idf @@ -1243,6 +1243,7 @@ ZN_1_FLR_1_SEC_1 Thermostat, !- Name ZN_1_FLR_1_SEC_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_1 DualSPSched; !- Control 1 Name @@ -1631,6 +1632,7 @@ ZN_1_FLR_1_SEC_2 Thermostat, !- Name ZN_1_FLR_1_SEC_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_2 DualSPSched; !- Control 1 Name @@ -2019,6 +2021,7 @@ ZN_1_FLR_1_SEC_3 Thermostat, !- Name ZN_1_FLR_1_SEC_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_3 DualSPSched; !- Control 1 Name @@ -2407,6 +2410,7 @@ ZN_1_FLR_1_SEC_4 Thermostat, !- Name ZN_1_FLR_1_SEC_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_4 DualSPSched; !- Control 1 Name @@ -2780,6 +2784,7 @@ ZN_1_FLR_1_SEC_5 Thermostat, !- Name ZN_1_FLR_1_SEC_5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN_1_FLR_1_SEC_5 DualSPSched; !- Control 1 Name diff --git a/testfiles/SingleFamilyHouse_HP_Slab.idf b/testfiles/SingleFamilyHouse_HP_Slab.idf index d471ad23a2c..b139f6e4443 100644 --- a/testfiles/SingleFamilyHouse_HP_Slab.idf +++ b/testfiles/SingleFamilyHouse_HP_Slab.idf @@ -3410,6 +3410,7 @@ Zone Thermostat_unit1, !- Name living_unit1, !- Zone or ZoneList Name zone_control_type, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type thermostat_living Dual SP Control; !- Control 1 Name diff --git a/testfiles/SingleFamilyHouse_HP_Slab_Dehumidification.idf b/testfiles/SingleFamilyHouse_HP_Slab_Dehumidification.idf index e39fb272a72..4c92cc700fa 100644 --- a/testfiles/SingleFamilyHouse_HP_Slab_Dehumidification.idf +++ b/testfiles/SingleFamilyHouse_HP_Slab_Dehumidification.idf @@ -3429,6 +3429,7 @@ Zone Thermostat_unit1, !- Name living_unit1, !- Zone or ZoneList Name zone_control_type, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type thermostat_living Dual SP Control; !- Control 1 Name diff --git a/testfiles/SingleFamilyHouse_TwoSpeed_CutoutTemperature.idf b/testfiles/SingleFamilyHouse_TwoSpeed_CutoutTemperature.idf index 4a4f501f1c0..ddcbd43dd03 100644 --- a/testfiles/SingleFamilyHouse_TwoSpeed_CutoutTemperature.idf +++ b/testfiles/SingleFamilyHouse_TwoSpeed_CutoutTemperature.idf @@ -1456,6 +1456,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1463,8 +1464,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf index 92394582b33..c0b5d939ffd 100644 --- a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf +++ b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil.idf @@ -1540,6 +1540,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1547,8 +1548,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoilEMS.idf b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoilEMS.idf index 076763687d0..9374b180f1b 100644 --- a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoilEMS.idf +++ b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoilEMS.idf @@ -1540,6 +1540,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1547,8 +1548,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil_SPControl.idf b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil_SPControl.idf index 5c9d230d709..bcf4c5ae3e4 100644 --- a/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil_SPControl.idf +++ b/testfiles/SingleFamilyHouse_TwoSpeed_MultiStageElectricSuppCoil_SPControl.idf @@ -1566,6 +1566,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + 2.0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints, !- Control 1 Name , !- Control 2 Object Type @@ -1573,8 +1574,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 2.0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name ThermostatSetpoint:DualSetpoint, Setpoints, !- Name diff --git a/testfiles/SingleFamilyHouse_TwoSpeed_ZoneAirBalance.idf b/testfiles/SingleFamilyHouse_TwoSpeed_ZoneAirBalance.idf index 12025e5cff8..aabd626e35a 100644 --- a/testfiles/SingleFamilyHouse_TwoSpeed_ZoneAirBalance.idf +++ b/testfiles/SingleFamilyHouse_TwoSpeed_ZoneAirBalance.idf @@ -1463,6 +1463,7 @@ Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/SmOffPSZ-MultiModeDX.idf b/testfiles/SmOffPSZ-MultiModeDX.idf index f94437755b7..e8e2077766a 100644 --- a/testfiles/SmOffPSZ-MultiModeDX.idf +++ b/testfiles/SmOffPSZ-MultiModeDX.idf @@ -2109,6 +2109,7 @@ South zone1, !- Name ZSF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2116,6 +2117,7 @@ North zone1, !- Name ZNF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2123,6 +2125,7 @@ South zone2, !- Name ZSF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2130,6 +2133,7 @@ North zone2, !- Name ZNF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SmOffPSZ.idf b/testfiles/SmOffPSZ.idf index bde068db11e..0b08f9becc2 100644 --- a/testfiles/SmOffPSZ.idf +++ b/testfiles/SmOffPSZ.idf @@ -2114,6 +2114,7 @@ South zone1, !- Name ZSF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2121,6 +2122,7 @@ North zone1, !- Name ZNF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2128,6 +2130,7 @@ South zone2, !- Name ZSF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2135,6 +2138,7 @@ North zone2, !- Name ZNF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SmallOffice_CentralDOAS.idf b/testfiles/SmallOffice_CentralDOAS.idf index 28015790a86..5768ebfa40c 100644 --- a/testfiles/SmallOffice_CentralDOAS.idf +++ b/testfiles/SmallOffice_CentralDOAS.idf @@ -2684,6 +2684,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2691,6 +2692,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2698,6 +2700,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2705,6 +2708,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2712,6 +2716,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/SmallOffice_CentralDOAS_WithDOASExhaustFan.idf b/testfiles/SmallOffice_CentralDOAS_WithDOASExhaustFan.idf index a7a3c27ca71..4b1d388095a 100644 --- a/testfiles/SmallOffice_CentralDOAS_WithDOASExhaustFan.idf +++ b/testfiles/SmallOffice_CentralDOAS_WithDOASExhaustFan.idf @@ -2689,6 +2689,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2696,6 +2697,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2703,6 +2705,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2710,6 +2713,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2717,6 +2721,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/SolarShadingTest.idf b/testfiles/SolarShadingTest.idf index e2873e7d137..ae27f05c04b 100644 --- a/testfiles/SolarShadingTest.idf +++ b/testfiles/SolarShadingTest.idf @@ -2322,6 +2322,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2399,6 +2400,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2476,6 +2478,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2553,6 +2556,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2630,6 +2634,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2707,6 +2712,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2784,6 +2790,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2861,6 +2868,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2938,6 +2946,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTestGPU.idf b/testfiles/SolarShadingTestGPU.idf index 311cc00e886..32bd44d9b48 100644 --- a/testfiles/SolarShadingTestGPU.idf +++ b/testfiles/SolarShadingTestGPU.idf @@ -2322,6 +2322,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2399,6 +2400,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2476,6 +2478,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2553,6 +2556,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2630,6 +2634,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2707,6 +2712,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2784,6 +2790,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2861,6 +2868,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2938,6 +2946,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTest_DisableSelfShading.idf b/testfiles/SolarShadingTest_DisableSelfShading.idf index 42b5c433e03..98ba6359d5f 100644 --- a/testfiles/SolarShadingTest_DisableSelfShading.idf +++ b/testfiles/SolarShadingTest_DisableSelfShading.idf @@ -2334,6 +2334,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2411,6 +2412,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2488,6 +2490,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2565,6 +2568,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2642,6 +2646,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2719,6 +2724,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2796,6 +2802,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2873,6 +2880,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2950,6 +2958,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTest_DisableSelfShadingGroup.idf b/testfiles/SolarShadingTest_DisableSelfShadingGroup.idf index 953fbc70658..86adcd5d37e 100644 --- a/testfiles/SolarShadingTest_DisableSelfShadingGroup.idf +++ b/testfiles/SolarShadingTest_DisableSelfShadingGroup.idf @@ -2343,6 +2343,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2420,6 +2421,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2497,6 +2499,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2574,6 +2577,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2651,6 +2655,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2728,6 +2733,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2805,6 +2811,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2882,6 +2889,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2959,6 +2967,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTest_ExternalFraction.idf b/testfiles/SolarShadingTest_ExternalFraction.idf index e8a81640fb9..17317fd9cc3 100644 --- a/testfiles/SolarShadingTest_ExternalFraction.idf +++ b/testfiles/SolarShadingTest_ExternalFraction.idf @@ -4061,6 +4061,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -4138,6 +4139,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -4215,6 +4217,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -4292,6 +4295,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -4369,6 +4373,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -4446,6 +4451,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -4523,6 +4529,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -4600,6 +4607,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -4677,6 +4685,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTest_ImportedShading.idf b/testfiles/SolarShadingTest_ImportedShading.idf index 795b4677dfc..b327807bbfe 100644 --- a/testfiles/SolarShadingTest_ImportedShading.idf +++ b/testfiles/SolarShadingTest_ImportedShading.idf @@ -2335,6 +2335,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2412,6 +2413,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2489,6 +2491,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2566,6 +2569,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2643,6 +2647,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2720,6 +2725,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2797,6 +2803,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2874,6 +2881,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2951,6 +2959,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SolarShadingTest_SQL.idf b/testfiles/SolarShadingTest_SQL.idf index e8e2a74e656..1c9db06ee16 100644 --- a/testfiles/SolarShadingTest_SQL.idf +++ b/testfiles/SolarShadingTest_SQL.idf @@ -2322,6 +2322,7 @@ ZONE 1 @ 200 601 0 T CONTROLS, !- Name ZONE 1 @ 200 601 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 1 @ 200 601 0 T SETPOINTS; !- Control 1 Name @@ -2399,6 +2400,7 @@ ZONE 2 @ 200 200 0 T CONTROLS, !- Name ZONE 2 @ 200 200 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 2 @ 200 200 0 T SETPOINTS; !- Control 1 Name @@ -2476,6 +2478,7 @@ ZONE 3 @ 200 610 0 T CONTROLS, !- Name ZONE 3 @ 200 610 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 3 @ 200 610 0 T SETPOINTS; !- Control 1 Name @@ -2553,6 +2556,7 @@ ZONE 4 @ 200 600 0 T CONTROLS, !- Name ZONE 4 @ 200 600 0 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 4 @ 200 600 0 T SETPOINTS; !- Control 1 Name @@ -2630,6 +2634,7 @@ ZONE 5 @ 200 601 1 T CONTROLS, !- Name ZONE 5 @ 200 601 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 5 @ 200 601 1 T SETPOINTS; !- Control 1 Name @@ -2707,6 +2712,7 @@ ZONE 6 @ 200 200 1 T CONTROLS, !- Name ZONE 6 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 6 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2784,6 +2790,7 @@ ZONE 7 @ 200 610 1 T CONTROLS, !- Name ZONE 7 @ 200 610 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 7 @ 200 610 1 T SETPOINTS; !- Control 1 Name @@ -2861,6 +2868,7 @@ ZONE 8 @ 200 200 1 T CONTROLS, !- Name ZONE 8 @ 200 200 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 8 @ 200 200 1 T SETPOINTS; !- Control 1 Name @@ -2938,6 +2946,7 @@ ZONE 9 @ 200 600 1 T CONTROLS, !- Name ZONE 9 @ 200 600 1 T, !- Zone or ZoneList Name Zone Control Type Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZONE 9 @ 200 600 1 T SETPOINTS; !- Control 1 Name diff --git a/testfiles/SpectralAngularOpticalProperties_TableData.idf b/testfiles/SpectralAngularOpticalProperties_TableData.idf index 585d86c1262..e659f2054ad 100644 --- a/testfiles/SpectralAngularOpticalProperties_TableData.idf +++ b/testfiles/SpectralAngularOpticalProperties_TableData.idf @@ -2714,6 +2714,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2721,6 +2722,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -2728,6 +2730,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/StackedZonesWithInterzoneIRTLayers.idf b/testfiles/StackedZonesWithInterzoneIRTLayers.idf index 3293422af3e..f4812b534f9 100644 --- a/testfiles/StackedZonesWithInterzoneIRTLayers.idf +++ b/testfiles/StackedZonesWithInterzoneIRTLayers.idf @@ -1163,6 +1163,7 @@ Bottom-Thermostat, !- Name Bottom, !- Zone or ZoneList Name Bottom-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Bottom-Heating Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1174,6 +1175,7 @@ SecondLevel-Thermostat, !- Name SecondLevel, !- Zone or ZoneList Name SecondLevel-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type SecondLevel-Cooling Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1185,6 +1187,7 @@ ThirdLevel-Thermostat, !- Name ThirdLevel, !- Zone or ZoneList Name ThirdLevel-Control Sched,!- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type ThirdLevel-Cooling Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/Standard621SimplifiedProcedure_PIUterminal.idf b/testfiles/Standard621SimplifiedProcedure_PIUterminal.idf index 585a8bbaf00..48927d09007 100644 --- a/testfiles/Standard621SimplifiedProcedure_PIUterminal.idf +++ b/testfiles/Standard621SimplifiedProcedure_PIUterminal.idf @@ -2108,6 +2108,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2115,6 +2116,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2122,6 +2124,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/Standard621SimplifiedProcedure_VAVterminal.idf b/testfiles/Standard621SimplifiedProcedure_VAVterminal.idf index 4d7e66d2412..9509778de6d 100644 --- a/testfiles/Standard621SimplifiedProcedure_VAVterminal.idf +++ b/testfiles/Standard621SimplifiedProcedure_VAVterminal.idf @@ -2370,6 +2370,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2381,6 +2382,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2392,6 +2394,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2403,6 +2406,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2414,6 +2418,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/SteamSystemAutoSize.idf b/testfiles/SteamSystemAutoSize.idf index 23cf9ab06e8..1b0391883cc 100644 --- a/testfiles/SteamSystemAutoSize.idf +++ b/testfiles/SteamSystemAutoSize.idf @@ -3135,6 +3135,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE1-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3148,6 +3149,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE2-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3161,6 +3163,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE3-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3174,6 +3177,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE4-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3187,6 +3191,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE5-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/SteamSystemAutoSize_DistrictHeatingSteam.idf b/testfiles/SteamSystemAutoSize_DistrictHeatingSteam.idf index 03bd0e61bd3..30f840e6ef4 100644 --- a/testfiles/SteamSystemAutoSize_DistrictHeatingSteam.idf +++ b/testfiles/SteamSystemAutoSize_DistrictHeatingSteam.idf @@ -3135,6 +3135,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE1-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3148,6 +3149,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE2-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3161,6 +3163,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE3-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3174,6 +3177,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE4-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -3187,6 +3191,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SPACE5-1 SingleHeatSPSched, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/StormWindow.idf b/testfiles/StormWindow.idf index 4c3b58d7d9d..d26c9df26e7 100644 --- a/testfiles/StormWindow.idf +++ b/testfiles/StormWindow.idf @@ -1032,6 +1032,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1041,6 +1042,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1050,6 +1052,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/StripMallZoneEvapCooler.idf b/testfiles/StripMallZoneEvapCooler.idf index 343b13229fc..e3a80451b16 100644 --- a/testfiles/StripMallZoneEvapCooler.idf +++ b/testfiles/StripMallZoneEvapCooler.idf @@ -3941,6 +3941,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -3948,6 +3949,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -3955,6 +3957,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -3962,6 +3965,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -3969,6 +3973,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3976,6 +3981,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3983,6 +3989,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -3990,6 +3997,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -3997,6 +4005,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -4004,6 +4013,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/StripMallZoneEvapCoolerAutosized.idf b/testfiles/StripMallZoneEvapCoolerAutosized.idf index 17ce9e41413..5697e8871e0 100644 --- a/testfiles/StripMallZoneEvapCoolerAutosized.idf +++ b/testfiles/StripMallZoneEvapCoolerAutosized.idf @@ -3941,6 +3941,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -3948,6 +3949,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -3955,6 +3957,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -3962,6 +3965,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -3969,6 +3973,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3976,6 +3981,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3983,6 +3989,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -3990,6 +3997,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -3997,6 +4005,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -4004,6 +4013,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/StripMallZoneEvapCoolerRHcutoff.idf b/testfiles/StripMallZoneEvapCoolerRHcutoff.idf index bde9cf40de6..7a187b10727 100644 --- a/testfiles/StripMallZoneEvapCoolerRHcutoff.idf +++ b/testfiles/StripMallZoneEvapCoolerRHcutoff.idf @@ -3941,6 +3941,7 @@ LGstore1 Thermostat, !- Name LGstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore1 DualSPSched; !- Control 1 Name @@ -3948,6 +3949,7 @@ LGstore2 Thermostat, !- Name LGstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type LGstore2 DualSPSched; !- Control 1 Name @@ -3955,6 +3957,7 @@ SMstore1 Thermostat, !- Name SMstore1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore1 DualSPSched; !- Control 1 Name @@ -3962,6 +3965,7 @@ SMstore2 Thermostat, !- Name SMstore2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore2 DualSPSched; !- Control 1 Name @@ -3969,6 +3973,7 @@ SMstore3 Thermostat, !- Name SMstore3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore3 DualSPSched; !- Control 1 Name @@ -3976,6 +3981,7 @@ SMstore4 Thermostat, !- Name SMstore4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore4 DualSPSched; !- Control 1 Name @@ -3983,6 +3989,7 @@ SMstore5 Thermostat, !- Name SMstore5, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore5 DualSPSched; !- Control 1 Name @@ -3990,6 +3997,7 @@ SMstore6 Thermostat, !- Name SMstore6, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore6 DualSPSched; !- Control 1 Name @@ -3997,6 +4005,7 @@ SMstore7 Thermostat, !- Name SMstore7, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore7 DualSPSched; !- Control 1 Name @@ -4004,6 +4013,7 @@ SMstore8 Thermostat, !- Name SMstore8, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type SMstore8 DualSPSched; !- Control 1 Name diff --git a/testfiles/SuperMarketDetailed_DesuperHeatingCoil.idf b/testfiles/SuperMarketDetailed_DesuperHeatingCoil.idf index 49ec7449fbb..94f57cb7218 100644 --- a/testfiles/SuperMarketDetailed_DesuperHeatingCoil.idf +++ b/testfiles/SuperMarketDetailed_DesuperHeatingCoil.idf @@ -1391,6 +1391,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SuperMarket_DesuperHeatingCoil.idf b/testfiles/SuperMarket_DesuperHeatingCoil.idf index 73f5e70d763..73952e3d075 100644 --- a/testfiles/SuperMarket_DesuperHeatingCoil.idf +++ b/testfiles/SuperMarket_DesuperHeatingCoil.idf @@ -1391,6 +1391,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SuperMarket_DetailedEvapCondenser.idf b/testfiles/SuperMarket_DetailedEvapCondenser.idf index 57cb4e43fcb..9cd58dd5106 100644 --- a/testfiles/SuperMarket_DetailedEvapCondenser.idf +++ b/testfiles/SuperMarket_DetailedEvapCondenser.idf @@ -1428,6 +1428,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SuperMarket_EvapCondenser.idf b/testfiles/SuperMarket_EvapCondenser.idf index bbdaf7705c2..b173efc5438 100644 --- a/testfiles/SuperMarket_EvapCondenser.idf +++ b/testfiles/SuperMarket_EvapCondenser.idf @@ -1375,6 +1375,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SuperMarket_SharedEvapCondenser.idf b/testfiles/SuperMarket_SharedEvapCondenser.idf index 3cf2997fd29..2e06b909f6f 100644 --- a/testfiles/SuperMarket_SharedEvapCondenser.idf +++ b/testfiles/SuperMarket_SharedEvapCondenser.idf @@ -1428,6 +1428,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Supermarket.idf b/testfiles/Supermarket.idf index 20640ae437a..b8a0db36ee7 100644 --- a/testfiles/Supermarket.idf +++ b/testfiles/Supermarket.idf @@ -1361,6 +1361,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupermarketSecondary.idf b/testfiles/SupermarketSecondary.idf index dbdf0e19e71..91096af5fe1 100644 --- a/testfiles/SupermarketSecondary.idf +++ b/testfiles/SupermarketSecondary.idf @@ -1411,6 +1411,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupermarketSubCoolersVariableSuction.idf b/testfiles/SupermarketSubCoolersVariableSuction.idf index 28b3a71530f..0d05c5ffaec 100644 --- a/testfiles/SupermarketSubCoolersVariableSuction.idf +++ b/testfiles/SupermarketSubCoolersVariableSuction.idf @@ -1408,6 +1408,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupermarketTranscriticalCO2.idf b/testfiles/SupermarketTranscriticalCO2.idf index 61c95120fd9..4f9c5d26378 100644 --- a/testfiles/SupermarketTranscriticalCO2.idf +++ b/testfiles/SupermarketTranscriticalCO2.idf @@ -1394,6 +1394,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupermarketTwoStageFlashIntercooler.idf b/testfiles/SupermarketTwoStageFlashIntercooler.idf index ff1135267b8..c91a3dc86dd 100644 --- a/testfiles/SupermarketTwoStageFlashIntercooler.idf +++ b/testfiles/SupermarketTwoStageFlashIntercooler.idf @@ -1403,6 +1403,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupermarketTwoStageShellCoilIntercooler.idf b/testfiles/SupermarketTwoStageShellCoilIntercooler.idf index 8d9f175240b..c9da28adb04 100644 --- a/testfiles/SupermarketTwoStageShellCoilIntercooler.idf +++ b/testfiles/SupermarketTwoStageShellCoilIntercooler.idf @@ -1403,6 +1403,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Supermarket_CascadeCond.idf b/testfiles/Supermarket_CascadeCond.idf index dcfa33712bf..6da0ce7be93 100644 --- a/testfiles/Supermarket_CascadeCond.idf +++ b/testfiles/Supermarket_CascadeCond.idf @@ -1405,6 +1405,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Supermarket_Detailed.idf b/testfiles/Supermarket_Detailed.idf index 9b4a7b11f1b..fc5b7f6bd70 100644 --- a/testfiles/Supermarket_Detailed.idf +++ b/testfiles/Supermarket_Detailed.idf @@ -1406,6 +1406,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/Supermarket_SharedAirCondenser.idf b/testfiles/Supermarket_SharedAirCondenser.idf index 3971998830e..71995c3841b 100644 --- a/testfiles/Supermarket_SharedAirCondenser.idf +++ b/testfiles/Supermarket_SharedAirCondenser.idf @@ -1406,6 +1406,7 @@ SalesFloor Thermostat, !- Name SalesFloor, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/SupplyPlenumVAV.idf b/testfiles/SupplyPlenumVAV.idf index 53ef8a8e9f5..c5bf97815aa 100644 --- a/testfiles/SupplyPlenumVAV.idf +++ b/testfiles/SupplyPlenumVAV.idf @@ -2073,6 +2073,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2080,6 +2081,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2087,6 +2089,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/SurfaceGroundHeatExchanger.idf b/testfiles/SurfaceGroundHeatExchanger.idf index f66948817d7..3327683a3a9 100644 --- a/testfiles/SurfaceGroundHeatExchanger.idf +++ b/testfiles/SurfaceGroundHeatExchanger.idf @@ -2574,6 +2574,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2585,6 +2586,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2596,6 +2598,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2607,6 +2610,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2618,6 +2622,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/SurfaceHeatSourceTerm_RefBldgSmallOfficeNew2004.idf b/testfiles/SurfaceHeatSourceTerm_RefBldgSmallOfficeNew2004.idf index 288c111630b..c2ba0c4de7e 100644 --- a/testfiles/SurfaceHeatSourceTerm_RefBldgSmallOfficeNew2004.idf +++ b/testfiles/SurfaceHeatSourceTerm_RefBldgSmallOfficeNew2004.idf @@ -2748,6 +2748,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2755,6 +2756,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2762,6 +2764,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2769,6 +2772,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2776,6 +2780,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/TRHConstFlowChillerOneBranch.idf b/testfiles/TRHConstFlowChillerOneBranch.idf index d4ac0966323..61795f7835f 100644 --- a/testfiles/TRHConstFlowChillerOneBranch.idf +++ b/testfiles/TRHConstFlowChillerOneBranch.idf @@ -1870,6 +1870,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1879,6 +1880,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1888,6 +1890,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TRHEvapCoolerOAStaged.idf b/testfiles/TRHEvapCoolerOAStaged.idf index 9ef003c646d..2d40d668b1c 100644 --- a/testfiles/TRHEvapCoolerOAStaged.idf +++ b/testfiles/TRHEvapCoolerOAStaged.idf @@ -1334,6 +1334,7 @@ Zone 1 Thermostat, !- Name SouthWest ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1343,6 +1344,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1352,6 +1354,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TRHEvapCoolerOAStagedWetCoil.idf b/testfiles/TRHEvapCoolerOAStagedWetCoil.idf index 3de942f3ab7..9b2e38e5e1e 100644 --- a/testfiles/TRHEvapCoolerOAStagedWetCoil.idf +++ b/testfiles/TRHEvapCoolerOAStagedWetCoil.idf @@ -1334,6 +1334,7 @@ Zone 1 Thermostat, !- Name SouthWest ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1343,6 +1344,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1352,6 +1354,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermRHDXSystem.idf b/testfiles/TermRHDXSystem.idf index 47384a814c3..aff91f6766c 100644 --- a/testfiles/TermRHDXSystem.idf +++ b/testfiles/TermRHDXSystem.idf @@ -1362,6 +1362,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1371,6 +1372,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1380,6 +1382,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermRHGasElecCoils.idf b/testfiles/TermRHGasElecCoils.idf index a272b6d450b..13ecd3fc028 100644 --- a/testfiles/TermRHGasElecCoils.idf +++ b/testfiles/TermRHGasElecCoils.idf @@ -1719,6 +1719,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1728,6 +1729,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1737,6 +1739,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermReheat.idf b/testfiles/TermReheat.idf index 3cdb29f6a6e..dfed06daef0 100644 --- a/testfiles/TermReheat.idf +++ b/testfiles/TermReheat.idf @@ -1958,6 +1958,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1967,6 +1968,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1976,6 +1978,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermReheatPri-SecLoop.idf b/testfiles/TermReheatPri-SecLoop.idf index 6ce7107efed..7c21c1e99bc 100644 --- a/testfiles/TermReheatPri-SecLoop.idf +++ b/testfiles/TermReheatPri-SecLoop.idf @@ -2002,6 +2002,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2011,6 +2012,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2020,6 +2022,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermReheatScheduledPump.idf b/testfiles/TermReheatScheduledPump.idf index ac1c0e3b8d9..c400826a2f4 100644 --- a/testfiles/TermReheatScheduledPump.idf +++ b/testfiles/TermReheatScheduledPump.idf @@ -2016,6 +2016,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2025,6 +2026,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2034,6 +2036,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermReheatSurfTC.idf b/testfiles/TermReheatSurfTC.idf index da5ae17d7f9..6e51fd81e53 100644 --- a/testfiles/TermReheatSurfTC.idf +++ b/testfiles/TermReheatSurfTC.idf @@ -1760,6 +1760,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1769,6 +1770,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1778,6 +1780,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermReheatZoneExh.idf b/testfiles/TermReheatZoneExh.idf index db81af47510..7e5281fbab4 100644 --- a/testfiles/TermReheatZoneExh.idf +++ b/testfiles/TermReheatZoneExh.idf @@ -1997,6 +1997,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2006,6 +2007,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2015,6 +2017,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermRhDualSetpointWithDB.idf b/testfiles/TermRhDualSetpointWithDB.idf index 2b04c78862e..c06a3f69213 100644 --- a/testfiles/TermRhDualSetpointWithDB.idf +++ b/testfiles/TermRhDualSetpointWithDB.idf @@ -1938,6 +1938,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -1945,6 +1946,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -1952,6 +1954,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/TermRhGenericOAHeatRecMinExh.idf b/testfiles/TermRhGenericOAHeatRecMinExh.idf index 357ed8b22cf..d508ebb5c50 100644 --- a/testfiles/TermRhGenericOAHeatRecMinExh.idf +++ b/testfiles/TermRhGenericOAHeatRecMinExh.idf @@ -2016,6 +2016,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2025,6 +2026,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2034,6 +2036,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermRhGenericOAHeatRecPreheat.idf b/testfiles/TermRhGenericOAHeatRecPreheat.idf index 00fcdb8f120..96e7a8c79bd 100644 --- a/testfiles/TermRhGenericOAHeatRecPreheat.idf +++ b/testfiles/TermRhGenericOAHeatRecPreheat.idf @@ -2011,6 +2011,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2020,6 +2021,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2029,6 +2031,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TermRhSingleHeatCoolNoDB.idf b/testfiles/TermRhSingleHeatCoolNoDB.idf index f4d6593405d..8ddac4a3f2e 100644 --- a/testfiles/TermRhSingleHeatCoolNoDB.idf +++ b/testfiles/TermRhSingleHeatCoolNoDB.idf @@ -1930,6 +1930,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type HC Setpoints; !- Control 1 Name @@ -1937,6 +1938,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type HC Setpoints; !- Control 1 Name @@ -1944,6 +1946,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type HC Setpoints; !- Control 1 Name diff --git a/testfiles/ThermochromicWindow.idf b/testfiles/ThermochromicWindow.idf index 1da5b1371a5..2c5ea5cca76 100644 --- a/testfiles/ThermochromicWindow.idf +++ b/testfiles/ThermochromicWindow.idf @@ -1431,6 +1431,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -1941,6 +1942,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2351,6 +2353,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2791,6 +2794,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -3201,6 +3205,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/TransparentInsulationSimple.idf b/testfiles/TransparentInsulationSimple.idf index 51204a1cad2..5598b4d1077 100644 --- a/testfiles/TransparentInsulationSimple.idf +++ b/testfiles/TransparentInsulationSimple.idf @@ -493,6 +493,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TranspiredCollectors.idf b/testfiles/TranspiredCollectors.idf index f361ee62ec4..d489332a484 100644 --- a/testfiles/TranspiredCollectors.idf +++ b/testfiles/TranspiredCollectors.idf @@ -3450,6 +3450,7 @@ ZN1 Thermostat, !- Name ZN1_S_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3770,6 +3771,7 @@ ZN2 Thermostat, !- Name ZN2_E_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4090,6 +4092,7 @@ ZN3 Thermostat, !- Name ZN3_N_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4410,6 +4413,7 @@ ZN4 Thermostat, !- Name ZN4_W_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -4730,6 +4734,7 @@ ZN5 Thermostat, !- Name ZN5_Core_Space_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -5067,6 +5072,7 @@ ZN11 Thermostat, !- Name ZN11_Shop_1, !- Zone or ZoneList Name Shop Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Shop Heating Setpoints Constant, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -5281,6 +5287,7 @@ ZN12 Thermostat, !- Name ZN12_Shop_1, !- Zone or ZoneList Name Shop Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Shop Heating Setpoints Constant, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -5482,6 +5489,7 @@ ZN13 Thermostat, !- Name ZN13_Shop_1, !- Zone or ZoneList Name Shop Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Shop Heating Setpoints Constant, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -5695,6 +5703,7 @@ ZN14 Thermostat, !- Name ZN14_Shop_1, !- Zone or ZoneList Name Shop Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Shop Heating Setpoints Constant, !- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/TwoWayCommonPipe_Pri-Sec.idf b/testfiles/TwoWayCommonPipe_Pri-Sec.idf index efeb67d1b80..21274659112 100644 --- a/testfiles/TwoWayCommonPipe_Pri-Sec.idf +++ b/testfiles/TwoWayCommonPipe_Pri-Sec.idf @@ -1828,6 +1828,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1947,6 +1948,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2080,6 +2082,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2213,6 +2216,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2346,6 +2350,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name COMPACT HVAC-ALWAYS 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/US+SF+CZ4A+hp+crawlspace+IECC_2006_VRF.idf b/testfiles/US+SF+CZ4A+hp+crawlspace+IECC_2006_VRF.idf index 69d4a06f230..e0a61971e1d 100644 --- a/testfiles/US+SF+CZ4A+hp+crawlspace+IECC_2006_VRF.idf +++ b/testfiles/US+SF+CZ4A+hp+crawlspace+IECC_2006_VRF.idf @@ -5906,6 +5906,7 @@ Zone Thermostat_unit1, !- Name living_unit1, !- Zone or ZoneList Name zone_control_type, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type thermostat_living Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitHeater.idf b/testfiles/UnitHeater.idf index 45c6ba1bf0a..8ebc6a4f897 100644 --- a/testfiles/UnitHeater.idf +++ b/testfiles/UnitHeater.idf @@ -1155,6 +1155,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1164,6 +1165,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1173,6 +1175,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitHeaterAuto.idf b/testfiles/UnitHeaterAuto.idf index 402eee77dc5..a9bba08ed33 100644 --- a/testfiles/UnitHeaterAuto.idf +++ b/testfiles/UnitHeaterAuto.idf @@ -1442,6 +1442,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1451,6 +1452,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1460,6 +1462,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitHeaterGasElec.idf b/testfiles/UnitHeaterGasElec.idf index 4cea46e5885..56ad37160fd 100644 --- a/testfiles/UnitHeaterGasElec.idf +++ b/testfiles/UnitHeaterGasElec.idf @@ -919,6 +919,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -928,6 +929,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -937,6 +939,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitVent5Zone.idf b/testfiles/UnitVent5Zone.idf index 890b3bfeaf2..5c8a01e5051 100644 --- a/testfiles/UnitVent5Zone.idf +++ b/testfiles/UnitVent5Zone.idf @@ -2419,6 +2419,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2428,6 +2429,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2437,6 +2439,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2446,6 +2449,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2455,6 +2459,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitVent5ZoneAuto-CycFan2-Variable-MinOAOn-Annual-SelectMonths-Detailed.idf b/testfiles/UnitVent5ZoneAuto-CycFan2-Variable-MinOAOn-Annual-SelectMonths-Detailed.idf index 976877141ad..dc0511da03d 100644 --- a/testfiles/UnitVent5ZoneAuto-CycFan2-Variable-MinOAOn-Annual-SelectMonths-Detailed.idf +++ b/testfiles/UnitVent5ZoneAuto-CycFan2-Variable-MinOAOn-Annual-SelectMonths-Detailed.idf @@ -2657,6 +2657,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2666,6 +2667,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2675,6 +2677,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2684,6 +2687,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2693,6 +2697,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitVent5ZoneAuto.idf b/testfiles/UnitVent5ZoneAuto.idf index f06c548c558..327a504bc63 100644 --- a/testfiles/UnitVent5ZoneAuto.idf +++ b/testfiles/UnitVent5ZoneAuto.idf @@ -2638,6 +2638,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2647,6 +2648,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2656,6 +2658,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2665,6 +2668,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2674,6 +2678,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitVent5ZoneFixedOANoCoilOpt.idf b/testfiles/UnitVent5ZoneFixedOANoCoilOpt.idf index 4cfa1efd172..25e6a5175d8 100644 --- a/testfiles/UnitVent5ZoneFixedOANoCoilOpt.idf +++ b/testfiles/UnitVent5ZoneFixedOANoCoilOpt.idf @@ -2399,6 +2399,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2408,6 +2409,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2417,6 +2419,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2426,6 +2429,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2435,6 +2439,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitaryHybridAC_DedicatedOutsideAir.idf b/testfiles/UnitaryHybridAC_DedicatedOutsideAir.idf index d3f66341e11..43f56ff8b86 100644 --- a/testfiles/UnitaryHybridAC_DedicatedOutsideAir.idf +++ b/testfiles/UnitaryHybridAC_DedicatedOutsideAir.idf @@ -549,6 +549,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_5ZoneWaterLoopHeatPump.idf b/testfiles/UnitarySystem_5ZoneWaterLoopHeatPump.idf index 842b59e23b9..73d85afd432 100644 --- a/testfiles/UnitarySystem_5ZoneWaterLoopHeatPump.idf +++ b/testfiles/UnitarySystem_5ZoneWaterLoopHeatPump.idf @@ -1823,6 +1823,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1834,6 +1835,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1845,6 +1847,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1856,6 +1859,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1867,6 +1871,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_DXCoilSystemAuto.idf b/testfiles/UnitarySystem_DXCoilSystemAuto.idf index 2ab90487618..00b4014f875 100644 --- a/testfiles/UnitarySystem_DXCoilSystemAuto.idf +++ b/testfiles/UnitarySystem_DXCoilSystemAuto.idf @@ -1656,6 +1656,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1665,6 +1666,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type East Zone DualSPSched; !- Control 1 Name @@ -1684,6 +1686,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_FurnaceWithDXSystemRHcontrol.idf b/testfiles/UnitarySystem_FurnaceWithDXSystemRHcontrol.idf index 9ea05a1b91a..96d69dd0a14 100644 --- a/testfiles/UnitarySystem_FurnaceWithDXSystemRHcontrol.idf +++ b/testfiles/UnitarySystem_FurnaceWithDXSystemRHcontrol.idf @@ -1176,6 +1176,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/UnitarySystem_HeatPumpAuto.idf b/testfiles/UnitarySystem_HeatPumpAuto.idf index 666f2437953..7ce7e4531f2 100644 --- a/testfiles/UnitarySystem_HeatPumpAuto.idf +++ b/testfiles/UnitarySystem_HeatPumpAuto.idf @@ -1637,6 +1637,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1646,6 +1647,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1655,6 +1657,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_MultiSpeedCoils_SingleMode.idf b/testfiles/UnitarySystem_MultiSpeedCoils_SingleMode.idf index cb7d69b0d19..59b401bc7fe 100644 --- a/testfiles/UnitarySystem_MultiSpeedCoils_SingleMode.idf +++ b/testfiles/UnitarySystem_MultiSpeedCoils_SingleMode.idf @@ -1662,6 +1662,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1671,6 +1672,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1680,6 +1682,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_MultiSpeedDX.idf b/testfiles/UnitarySystem_MultiSpeedDX.idf index d1fa7aaece2..3d0d4b912a6 100644 --- a/testfiles/UnitarySystem_MultiSpeedDX.idf +++ b/testfiles/UnitarySystem_MultiSpeedDX.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1961,6 +1962,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2052,6 +2054,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2146,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2234,6 +2238,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_MultiSpeedDX_EconoStaging.idf b/testfiles/UnitarySystem_MultiSpeedDX_EconoStaging.idf index 556b5998309..07f804ee159 100644 --- a/testfiles/UnitarySystem_MultiSpeedDX_EconoStaging.idf +++ b/testfiles/UnitarySystem_MultiSpeedDX_EconoStaging.idf @@ -1821,6 +1821,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1907,6 +1908,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1993,6 +1995,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2079,6 +2082,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2165,6 +2169,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_SingleSpeedDX.idf b/testfiles/UnitarySystem_SingleSpeedDX.idf index 6d7095d5ea1..430b6e4bdc4 100644 --- a/testfiles/UnitarySystem_SingleSpeedDX.idf +++ b/testfiles/UnitarySystem_SingleSpeedDX.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1961,6 +1962,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2052,6 +2054,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2146,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2234,6 +2238,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_SubcoolReheatDX.idf b/testfiles/UnitarySystem_SubcoolReheatDX.idf index 74f433479b3..63195207d78 100644 --- a/testfiles/UnitarySystem_SubcoolReheatDX.idf +++ b/testfiles/UnitarySystem_SubcoolReheatDX.idf @@ -2377,6 +2377,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2456,6 +2457,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2619,6 +2621,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2692,6 +2695,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2765,6 +2769,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_TwoSpeedDX.idf b/testfiles/UnitarySystem_TwoSpeedDX.idf index ea5f86b1c28..3549b2336c6 100644 --- a/testfiles/UnitarySystem_TwoSpeedDX.idf +++ b/testfiles/UnitarySystem_TwoSpeedDX.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1961,6 +1962,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2052,6 +2054,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2146,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2234,6 +2238,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_TwoStageDX.idf b/testfiles/UnitarySystem_TwoStageDX.idf index 09250384850..3efb9533799 100644 --- a/testfiles/UnitarySystem_TwoStageDX.idf +++ b/testfiles/UnitarySystem_TwoStageDX.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1961,6 +1962,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2052,6 +2054,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2146,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2234,6 +2238,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_TwoStageDXWithHumidityControl.idf b/testfiles/UnitarySystem_TwoStageDXWithHumidityControl.idf index 62f2b112247..a73e3b9fd17 100644 --- a/testfiles/UnitarySystem_TwoStageDXWithHumidityControl.idf +++ b/testfiles/UnitarySystem_TwoStageDXWithHumidityControl.idf @@ -1870,6 +1870,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1961,6 +1962,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2052,6 +2054,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2143,6 +2146,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2234,6 +2238,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_VSCoolingCoil.idf b/testfiles/UnitarySystem_VSCoolingCoil.idf index e391c948eee..2ac006682ea 100644 --- a/testfiles/UnitarySystem_VSCoolingCoil.idf +++ b/testfiles/UnitarySystem_VSCoolingCoil.idf @@ -1637,6 +1637,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1646,6 +1647,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1655,6 +1657,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_VSCoolingCoil_2.idf b/testfiles/UnitarySystem_VSCoolingCoil_2.idf index 755a950178f..c01e3787ff5 100644 --- a/testfiles/UnitarySystem_VSCoolingCoil_2.idf +++ b/testfiles/UnitarySystem_VSCoolingCoil_2.idf @@ -1622,6 +1622,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1631,6 +1632,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1640,6 +1642,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_VSCoolingCoil_ASHRAE205.idf b/testfiles/UnitarySystem_VSCoolingCoil_ASHRAE205.idf index e4acc6d5a54..119adec2efd 100644 --- a/testfiles/UnitarySystem_VSCoolingCoil_ASHRAE205.idf +++ b/testfiles/UnitarySystem_VSCoolingCoil_ASHRAE205.idf @@ -1622,6 +1622,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1631,6 +1632,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1640,6 +1642,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/UnitarySystem_VSHeatPumpWaterToAirEquationFit.idf b/testfiles/UnitarySystem_VSHeatPumpWaterToAirEquationFit.idf index c627429d6e4..77cc8240031 100644 --- a/testfiles/UnitarySystem_VSHeatPumpWaterToAirEquationFit.idf +++ b/testfiles/UnitarySystem_VSHeatPumpWaterToAirEquationFit.idf @@ -3893,6 +3893,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -4101,6 +4102,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -4296,6 +4298,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -4491,6 +4494,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -4686,6 +4690,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/UnitarySystem_VariableSpeedDX_SZVAV.idf b/testfiles/UnitarySystem_VariableSpeedDX_SZVAV.idf index 3f50cd461f0..eac5a256698 100644 --- a/testfiles/UnitarySystem_VariableSpeedDX_SZVAV.idf +++ b/testfiles/UnitarySystem_VariableSpeedDX_SZVAV.idf @@ -1820,6 +1820,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1906,6 +1907,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1994,6 +1996,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2080,6 +2083,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2166,6 +2170,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/UnitarySystem_WaterCoils_wMultiSpeedFan.idf b/testfiles/UnitarySystem_WaterCoils_wMultiSpeedFan.idf index 8cd9c4ec40a..4571400dc1f 100644 --- a/testfiles/UnitarySystem_WaterCoils_wMultiSpeedFan.idf +++ b/testfiles/UnitarySystem_WaterCoils_wMultiSpeedFan.idf @@ -1409,6 +1409,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name @@ -1416,6 +1417,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name @@ -1423,6 +1425,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint with DB; !- Control 1 Name diff --git a/testfiles/UnitarySystem_ZoneVSWSHP_wDOAS.idf b/testfiles/UnitarySystem_ZoneVSWSHP_wDOAS.idf index bf0e8a38c71..9514085f451 100644 --- a/testfiles/UnitarySystem_ZoneVSWSHP_wDOAS.idf +++ b/testfiles/UnitarySystem_ZoneVSWSHP_wDOAS.idf @@ -1107,6 +1107,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/UserDefinedRoomAirPatterns.idf b/testfiles/UserDefinedRoomAirPatterns.idf index a65a260196e..4c3cb4571d0 100644 --- a/testfiles/UserDefinedRoomAirPatterns.idf +++ b/testfiles/UserDefinedRoomAirPatterns.idf @@ -9133,6 +9133,7 @@ ZN1_SW_1 Thermostat, !- Name ZN1_SW_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN1_SW_1 DualSPSched; !- Control 1 Name @@ -9145,6 +9146,7 @@ ZN2_S_1 Thermostat, !- Name ZN2_S_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN2_S_1 DualSPSched; !- Control 1 Name @@ -9157,6 +9159,7 @@ ZN3_SE_1 Thermostat, !- Name ZN3_SE_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN3_SE_1 DualSPSched; !- Control 1 Name @@ -9169,6 +9172,7 @@ ZN4_E_1 Thermostat, !- Name ZN4_E_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN4_E_1 DualSPSched; !- Control 1 Name @@ -9181,6 +9185,7 @@ ZN5_NE_1 Thermostat, !- Name ZN5_NE_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN5_NE_1 DualSPSched; !- Control 1 Name @@ -9193,6 +9198,7 @@ ZN6_N_1 Thermostat, !- Name ZN6_N_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN6_N_1 DualSPSched; !- Control 1 Name @@ -9205,6 +9211,7 @@ ZN7_NW_1 Thermostat, !- Name ZN7_NW_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN7_NW_1 DualSPSched; !- Control 1 Name @@ -9217,6 +9224,7 @@ ZN8_W_1 Thermostat, !- Name ZN8_W_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN8_W_1 DualSPSched; !- Control 1 Name @@ -9229,6 +9237,7 @@ ZN9_Core_1 Thermostat, !- Name ZN9_Core_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type ZN9_Core_1 DualSPSched; !- Control 1 Name diff --git a/testfiles/UserInputViewFactorFile-LshapedZone.idf b/testfiles/UserInputViewFactorFile-LshapedZone.idf index 959049d3a54..5640d313540 100644 --- a/testfiles/UserInputViewFactorFile-LshapedZone.idf +++ b/testfiles/UserInputViewFactorFile-LshapedZone.idf @@ -1588,6 +1588,7 @@ Lshaped zone-Thermostat, !- Name Lshaped zone, !- Zone or ZoneList Name Lshaped zone-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type Lshaped zone-Cooling Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -1597,6 +1598,7 @@ LshapedZoneBase-Thermostat, !- Name LshapedZoneBase, !- Zone or ZoneList Name LshapedZoneBase-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type LshapedZoneBase-Cooling Setpoint with SB, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/VAVSingleDuctConstFlowBoiler.idf b/testfiles/VAVSingleDuctConstFlowBoiler.idf index 1a825570a61..8a20361c158 100644 --- a/testfiles/VAVSingleDuctConstFlowBoiler.idf +++ b/testfiles/VAVSingleDuctConstFlowBoiler.idf @@ -1998,6 +1998,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2005,6 +2006,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2012,6 +2014,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctReheat.idf b/testfiles/VAVSingleDuctReheat.idf index 11321a664bc..70a19d13fa0 100644 --- a/testfiles/VAVSingleDuctReheat.idf +++ b/testfiles/VAVSingleDuctReheat.idf @@ -1959,6 +1959,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -1966,6 +1967,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -1973,6 +1975,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctReheatBaseboard.idf b/testfiles/VAVSingleDuctReheatBaseboard.idf index b350c5a5b01..2d9c5bd4402 100644 --- a/testfiles/VAVSingleDuctReheatBaseboard.idf +++ b/testfiles/VAVSingleDuctReheatBaseboard.idf @@ -2152,6 +2152,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2159,6 +2160,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2166,6 +2168,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctReheatNoReheat.idf b/testfiles/VAVSingleDuctReheatNoReheat.idf index 233af3c7725..26e2a842dea 100644 --- a/testfiles/VAVSingleDuctReheatNoReheat.idf +++ b/testfiles/VAVSingleDuctReheatNoReheat.idf @@ -1994,6 +1994,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2001,6 +2002,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2008,6 +2010,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctReheat_DualMax.idf b/testfiles/VAVSingleDuctReheat_DualMax.idf index a69cd6713d6..22e59ec45bc 100644 --- a/testfiles/VAVSingleDuctReheat_DualMax.idf +++ b/testfiles/VAVSingleDuctReheat_DualMax.idf @@ -1956,6 +1956,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -1963,6 +1964,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -1970,6 +1972,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctReheat_MaxSAT_ReverseActing.idf b/testfiles/VAVSingleDuctReheat_MaxSAT_ReverseActing.idf index e54a0194930..ff953fec697 100644 --- a/testfiles/VAVSingleDuctReheat_MaxSAT_ReverseActing.idf +++ b/testfiles/VAVSingleDuctReheat_MaxSAT_ReverseActing.idf @@ -1988,6 +1988,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -1995,6 +1996,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2002,6 +2004,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VAVSingleDuctVarFlowBoiler.idf b/testfiles/VAVSingleDuctVarFlowBoiler.idf index ab7d694821e..9659e7d2184 100644 --- a/testfiles/VAVSingleDuctVarFlowBoiler.idf +++ b/testfiles/VAVSingleDuctVarFlowBoiler.idf @@ -1998,6 +1998,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2005,6 +2006,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2012,6 +2014,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/VRFMultispeedFan.idf b/testfiles/VRFMultispeedFan.idf index 486131d3ae3..5e787dd0fa7 100644 --- a/testfiles/VRFMultispeedFan.idf +++ b/testfiles/VRFMultispeedFan.idf @@ -3228,6 +3228,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3235,6 +3236,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3242,6 +3244,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3249,6 +3252,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3256,6 +3260,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VSDXCoilSystemAuto.idf b/testfiles/VSDXCoilSystemAuto.idf index 0915092caa4..2a313499e3d 100644 --- a/testfiles/VSDXCoilSystemAuto.idf +++ b/testfiles/VSDXCoilSystemAuto.idf @@ -2136,6 +2136,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2145,6 +2146,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type East Zone DualSPSched; !- Control 1 Name @@ -2164,6 +2166,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/VSHeatPumpWaterHeater.idf b/testfiles/VSHeatPumpWaterHeater.idf index b8a87d670bc..c55dacd4cce 100644 --- a/testfiles/VSHeatPumpWaterHeater.idf +++ b/testfiles/VSHeatPumpWaterHeater.idf @@ -3430,6 +3430,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3437,6 +3438,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3449,6 +3451,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3456,6 +3459,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3463,6 +3467,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VSHeatPumpWaterToAirEquationFit.idf b/testfiles/VSHeatPumpWaterToAirEquationFit.idf index d64e8a10eb8..c445efad436 100644 --- a/testfiles/VSHeatPumpWaterToAirEquationFit.idf +++ b/testfiles/VSHeatPumpWaterToAirEquationFit.idf @@ -3847,6 +3847,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -4049,6 +4050,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -4244,6 +4246,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -4439,6 +4442,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -4634,6 +4638,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/VSHeatPumpWaterToAirWithRHControl.idf b/testfiles/VSHeatPumpWaterToAirWithRHControl.idf index 52dd34f55e0..3b95b41baf0 100644 --- a/testfiles/VSHeatPumpWaterToAirWithRHControl.idf +++ b/testfiles/VSHeatPumpWaterToAirWithRHControl.idf @@ -3876,6 +3876,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 1; !- Control 1 Name @@ -4084,6 +4085,7 @@ Zone 2 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 2; !- Control 1 Name @@ -4285,6 +4287,7 @@ Zone 3 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 3; !- Control 1 Name @@ -4486,6 +4489,7 @@ Zone 4 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 4; !- Control 1 Name @@ -4687,6 +4691,7 @@ Zone 5 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Sched 5; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_5Zone.idf b/testfiles/VariableRefrigerantFlow_5Zone.idf index 76c88ce2853..a6dd9d44437 100644 --- a/testfiles/VariableRefrigerantFlow_5Zone.idf +++ b/testfiles/VariableRefrigerantFlow_5Zone.idf @@ -3144,6 +3144,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3151,6 +3152,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3158,6 +3160,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3165,6 +3168,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3172,6 +3176,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_5Zone_wAirloop.idf b/testfiles/VariableRefrigerantFlow_5Zone_wAirloop.idf index 592047e7e12..3be567e6987 100644 --- a/testfiles/VariableRefrigerantFlow_5Zone_wAirloop.idf +++ b/testfiles/VariableRefrigerantFlow_5Zone_wAirloop.idf @@ -3510,6 +3510,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3517,6 +3518,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3524,6 +3526,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3531,6 +3534,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3538,6 +3542,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_FluidTCtrl_5Zone.idf b/testfiles/VariableRefrigerantFlow_FluidTCtrl_5Zone.idf index 914eb4a74a8..5bf7a1efc1d 100644 --- a/testfiles/VariableRefrigerantFlow_FluidTCtrl_5Zone.idf +++ b/testfiles/VariableRefrigerantFlow_FluidTCtrl_5Zone.idf @@ -4249,6 +4249,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4256,6 +4257,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4263,6 +4265,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4270,6 +4273,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4277,6 +4281,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_FluidTCtrl_HR_5Zone.idf b/testfiles/VariableRefrigerantFlow_FluidTCtrl_HR_5Zone.idf index 5127701eb63..99df4bad9a3 100644 --- a/testfiles/VariableRefrigerantFlow_FluidTCtrl_HR_5Zone.idf +++ b/testfiles/VariableRefrigerantFlow_FluidTCtrl_HR_5Zone.idf @@ -4268,6 +4268,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4275,6 +4276,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4282,6 +4284,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4289,6 +4292,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -4296,6 +4300,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_FluidTCtrl_wSuppHeater_5Zone.idf b/testfiles/VariableRefrigerantFlow_FluidTCtrl_wSuppHeater_5Zone.idf index 277416be832..c455f5f36ac 100644 --- a/testfiles/VariableRefrigerantFlow_FluidTCtrl_wSuppHeater_5Zone.idf +++ b/testfiles/VariableRefrigerantFlow_FluidTCtrl_wSuppHeater_5Zone.idf @@ -2169,6 +2169,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2176,6 +2177,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2183,6 +2185,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2190,6 +2193,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2197,6 +2201,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/VariableRefrigerantFlow_wSuppHeater_5Zone.idf b/testfiles/VariableRefrigerantFlow_wSuppHeater_5Zone.idf index c08a24de956..dce354bdd75 100644 --- a/testfiles/VariableRefrigerantFlow_wSuppHeater_5Zone.idf +++ b/testfiles/VariableRefrigerantFlow_wSuppHeater_5Zone.idf @@ -2168,6 +2168,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2175,6 +2176,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2182,6 +2184,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2189,6 +2192,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2196,6 +2200,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/WCE_Diffuse_Shade.idf b/testfiles/WCE_Diffuse_Shade.idf index 687dfbc7833..b300c7f73bc 100644 --- a/testfiles/WCE_Diffuse_Shade.idf +++ b/testfiles/WCE_Diffuse_Shade.idf @@ -389,6 +389,7 @@ Main Termostat, !- Name Room 102, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualThermostat; !- Control 1 Name diff --git a/testfiles/WCE_DoubleClear_BSDF.idf b/testfiles/WCE_DoubleClear_BSDF.idf index 85e5e4db1c8..1b160365ba7 100644 --- a/testfiles/WCE_DoubleClear_BSDF.idf +++ b/testfiles/WCE_DoubleClear_BSDF.idf @@ -389,6 +389,7 @@ Main Termostat, !- Name Room 102, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualThermostat; !- Control 1 Name diff --git a/testfiles/WCE_Interior_VB_-45_deg.idf b/testfiles/WCE_Interior_VB_-45_deg.idf index eefafe17750..b202ee3e84a 100644 --- a/testfiles/WCE_Interior_VB_-45_deg.idf +++ b/testfiles/WCE_Interior_VB_-45_deg.idf @@ -389,6 +389,7 @@ Main Termostat, !- Name Room 102, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualThermostat; !- Control 1 Name diff --git a/testfiles/WWHPSimpleAuto.idf b/testfiles/WWHPSimpleAuto.idf index bdfdddfd4c7..366dcd541bc 100644 --- a/testfiles/WWHPSimpleAuto.idf +++ b/testfiles/WWHPSimpleAuto.idf @@ -2213,6 +2213,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2220,6 +2221,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name @@ -2227,6 +2229,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual setpoints; !- Control 1 Name diff --git a/testfiles/WaterCooledChillerWithVSCondenserControl.idf b/testfiles/WaterCooledChillerWithVSCondenserControl.idf index c1af4b1f172..d7637b5c905 100644 --- a/testfiles/WaterCooledChillerWithVSCondenserControl.idf +++ b/testfiles/WaterCooledChillerWithVSCondenserControl.idf @@ -16816,6 +16816,7 @@ blocks-3644_office_1_Core Thermostat, !- Name blocks-3644_office_1_Core, !- Zone or ZoneList Name blocks-3644_office_1_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 5; !- Control 1 Name @@ -16823,6 +16824,7 @@ blocks-3644_office_1_East Perimeter Thermostat, !- Name blocks-3644_office_1_East Perimeter, !- Zone or ZoneList Name blocks-3644_office_1_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 3; !- Control 1 Name @@ -16830,6 +16832,7 @@ blocks-3644_office_1_North Perimeter Thermostat, !- Name blocks-3644_office_1_North Perimeter, !- Zone or ZoneList Name blocks-3644_office_1_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 2; !- Control 1 Name @@ -16837,6 +16840,7 @@ blocks-3644_office_1_South Perimeter Thermostat, !- Name blocks-3644_office_1_South Perimeter, !- Zone or ZoneList Name blocks-3644_office_1_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 4; !- Control 1 Name @@ -16844,6 +16848,7 @@ blocks-3644_office_1_West Perimeter Thermostat, !- Name blocks-3644_office_1_West Perimeter, !- Zone or ZoneList Name blocks-3644_office_1_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 1; !- Control 1 Name @@ -16851,6 +16856,7 @@ blocks-3644_office_2_Core Thermostat, !- Name blocks-3644_office_2_Core, !- Zone or ZoneList Name blocks-3644_office_2_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 10; !- Control 1 Name @@ -16858,6 +16864,7 @@ blocks-3644_office_2_East Perimeter Thermostat, !- Name blocks-3644_office_2_East Perimeter, !- Zone or ZoneList Name blocks-3644_office_2_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 8; !- Control 1 Name @@ -16865,6 +16872,7 @@ blocks-3644_office_2_North Perimeter Thermostat, !- Name blocks-3644_office_2_North Perimeter, !- Zone or ZoneList Name blocks-3644_office_2_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 7; !- Control 1 Name @@ -16872,6 +16880,7 @@ blocks-3644_office_2_South Perimeter Thermostat, !- Name blocks-3644_office_2_South Perimeter, !- Zone or ZoneList Name blocks-3644_office_2_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 9; !- Control 1 Name @@ -16879,6 +16888,7 @@ blocks-3644_office_2_West Perimeter Thermostat, !- Name blocks-3644_office_2_West Perimeter, !- Zone or ZoneList Name blocks-3644_office_2_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 6; !- Control 1 Name @@ -16886,6 +16896,7 @@ blocks-3645_office_1_Core Thermostat, !- Name blocks-3645_office_1_Core, !- Zone or ZoneList Name blocks-3645_office_1_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 15; !- Control 1 Name @@ -16893,6 +16904,7 @@ blocks-3645_office_1_East Perimeter Thermostat, !- Name blocks-3645_office_1_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_1_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 13; !- Control 1 Name @@ -16900,6 +16912,7 @@ blocks-3645_office_1_North Perimeter Thermostat, !- Name blocks-3645_office_1_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_1_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 12; !- Control 1 Name @@ -16907,6 +16920,7 @@ blocks-3645_office_1_South Perimeter Thermostat, !- Name blocks-3645_office_1_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_1_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 14; !- Control 1 Name @@ -16914,6 +16928,7 @@ blocks-3645_office_1_West Perimeter Thermostat, !- Name blocks-3645_office_1_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_1_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 11; !- Control 1 Name @@ -16921,6 +16936,7 @@ blocks-3645_office_2_Core Thermostat, !- Name blocks-3645_office_2_Core, !- Zone or ZoneList Name blocks-3645_office_2_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 20; !- Control 1 Name @@ -16928,6 +16944,7 @@ blocks-3645_office_2_East Perimeter Thermostat, !- Name blocks-3645_office_2_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_2_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 18; !- Control 1 Name @@ -16935,6 +16952,7 @@ blocks-3645_office_2_North Perimeter Thermostat, !- Name blocks-3645_office_2_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_2_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 17; !- Control 1 Name @@ -16942,6 +16960,7 @@ blocks-3645_office_2_South Perimeter Thermostat, !- Name blocks-3645_office_2_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_2_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 19; !- Control 1 Name @@ -16949,6 +16968,7 @@ blocks-3645_office_2_West Perimeter Thermostat, !- Name blocks-3645_office_2_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_2_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 16; !- Control 1 Name @@ -16956,6 +16976,7 @@ blocks-3645_office_3_Core Thermostat, !- Name blocks-3645_office_3_Core, !- Zone or ZoneList Name blocks-3645_office_3_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 25; !- Control 1 Name @@ -16963,6 +16984,7 @@ blocks-3645_office_3_East Perimeter Thermostat, !- Name blocks-3645_office_3_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_3_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 23; !- Control 1 Name @@ -16970,6 +16992,7 @@ blocks-3645_office_3_North Perimeter Thermostat, !- Name blocks-3645_office_3_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_3_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 22; !- Control 1 Name @@ -16977,6 +17000,7 @@ blocks-3645_office_3_South Perimeter Thermostat, !- Name blocks-3645_office_3_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_3_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 24; !- Control 1 Name @@ -16984,6 +17008,7 @@ blocks-3645_office_3_West Perimeter Thermostat, !- Name blocks-3645_office_3_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_3_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 21; !- Control 1 Name @@ -16991,6 +17016,7 @@ blocks-3645_office_4_Core Thermostat, !- Name blocks-3645_office_4_Core, !- Zone or ZoneList Name blocks-3645_office_4_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 30; !- Control 1 Name @@ -16998,6 +17024,7 @@ blocks-3645_office_4_East Perimeter Thermostat, !- Name blocks-3645_office_4_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_4_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 28; !- Control 1 Name @@ -17005,6 +17032,7 @@ blocks-3645_office_4_North Perimeter Thermostat, !- Name blocks-3645_office_4_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_4_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 27; !- Control 1 Name @@ -17012,6 +17040,7 @@ blocks-3645_office_4_South Perimeter Thermostat, !- Name blocks-3645_office_4_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_4_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 29; !- Control 1 Name @@ -17019,6 +17048,7 @@ blocks-3645_office_4_West Perimeter Thermostat, !- Name blocks-3645_office_4_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_4_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 26; !- Control 1 Name @@ -17026,6 +17056,7 @@ blocks-3645_office_5_Core Thermostat, !- Name blocks-3645_office_5_Core, !- Zone or ZoneList Name blocks-3645_office_5_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 35; !- Control 1 Name @@ -17033,6 +17064,7 @@ blocks-3645_office_5_East Perimeter Thermostat, !- Name blocks-3645_office_5_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_5_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 33; !- Control 1 Name @@ -17040,6 +17072,7 @@ blocks-3645_office_5_North Perimeter Thermostat, !- Name blocks-3645_office_5_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_5_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 32; !- Control 1 Name @@ -17047,6 +17080,7 @@ blocks-3645_office_5_South Perimeter Thermostat, !- Name blocks-3645_office_5_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_5_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 34; !- Control 1 Name @@ -17054,6 +17088,7 @@ blocks-3645_office_5_West Perimeter Thermostat, !- Name blocks-3645_office_5_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_5_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 31; !- Control 1 Name @@ -17061,6 +17096,7 @@ blocks-3645_office_6_Core Thermostat, !- Name blocks-3645_office_6_Core, !- Zone or ZoneList Name blocks-3645_office_6_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 40; !- Control 1 Name @@ -17068,6 +17104,7 @@ blocks-3645_office_6_East Perimeter Thermostat, !- Name blocks-3645_office_6_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_6_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 38; !- Control 1 Name @@ -17075,6 +17112,7 @@ blocks-3645_office_6_North Perimeter Thermostat, !- Name blocks-3645_office_6_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_6_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 37; !- Control 1 Name @@ -17082,6 +17120,7 @@ blocks-3645_office_6_South Perimeter Thermostat, !- Name blocks-3645_office_6_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_6_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 39; !- Control 1 Name @@ -17089,6 +17128,7 @@ blocks-3645_office_6_West Perimeter Thermostat, !- Name blocks-3645_office_6_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_6_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 36; !- Control 1 Name @@ -17096,6 +17136,7 @@ blocks-3645_office_7_Core Thermostat, !- Name blocks-3645_office_7_Core, !- Zone or ZoneList Name blocks-3645_office_7_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 45; !- Control 1 Name @@ -17103,6 +17144,7 @@ blocks-3645_office_7_East Perimeter Thermostat, !- Name blocks-3645_office_7_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_7_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 43; !- Control 1 Name @@ -17110,6 +17152,7 @@ blocks-3645_office_7_North Perimeter Thermostat, !- Name blocks-3645_office_7_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_7_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 42; !- Control 1 Name @@ -17117,6 +17160,7 @@ blocks-3645_office_7_South Perimeter Thermostat, !- Name blocks-3645_office_7_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_7_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 44; !- Control 1 Name @@ -17124,6 +17168,7 @@ blocks-3645_office_7_West Perimeter Thermostat, !- Name blocks-3645_office_7_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_7_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 41; !- Control 1 Name @@ -17131,6 +17176,7 @@ blocks-3645_office_8_Core Thermostat, !- Name blocks-3645_office_8_Core, !- Zone or ZoneList Name blocks-3645_office_8_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 50; !- Control 1 Name @@ -17138,6 +17184,7 @@ blocks-3645_office_8_East Perimeter Thermostat, !- Name blocks-3645_office_8_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_8_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 48; !- Control 1 Name @@ -17145,6 +17192,7 @@ blocks-3645_office_8_North Perimeter Thermostat, !- Name blocks-3645_office_8_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_8_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 47; !- Control 1 Name @@ -17152,6 +17200,7 @@ blocks-3645_office_8_South Perimeter Thermostat, !- Name blocks-3645_office_8_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_8_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 49; !- Control 1 Name @@ -17159,6 +17208,7 @@ blocks-3645_office_8_West Perimeter Thermostat, !- Name blocks-3645_office_8_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_8_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 46; !- Control 1 Name @@ -17166,6 +17216,7 @@ blocks-3645_office_9_Core Thermostat, !- Name blocks-3645_office_9_Core, !- Zone or ZoneList Name blocks-3645_office_9_Core Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 55; !- Control 1 Name @@ -17173,6 +17224,7 @@ blocks-3645_office_9_East Perimeter Thermostat, !- Name blocks-3645_office_9_East Perimeter, !- Zone or ZoneList Name blocks-3645_office_9_East Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 53; !- Control 1 Name @@ -17180,6 +17232,7 @@ blocks-3645_office_9_North Perimeter Thermostat, !- Name blocks-3645_office_9_North Perimeter, !- Zone or ZoneList Name blocks-3645_office_9_North Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 52; !- Control 1 Name @@ -17187,6 +17240,7 @@ blocks-3645_office_9_South Perimeter Thermostat, !- Name blocks-3645_office_9_South Perimeter, !- Zone or ZoneList Name blocks-3645_office_9_South Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 54; !- Control 1 Name @@ -17194,6 +17248,7 @@ blocks-3645_office_9_West Perimeter Thermostat, !- Name blocks-3645_office_9_West Perimeter, !- Zone or ZoneList Name blocks-3645_office_9_West Perimeter Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 51; !- Control 1 Name diff --git a/testfiles/WaterSideEconomizer_Integrated.idf b/testfiles/WaterSideEconomizer_Integrated.idf index 80ed569013c..00b756e3c0b 100644 --- a/testfiles/WaterSideEconomizer_Integrated.idf +++ b/testfiles/WaterSideEconomizer_Integrated.idf @@ -2242,6 +2242,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2253,6 +2254,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2264,6 +2266,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2275,6 +2278,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2286,6 +2290,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/WaterSideEconomizer_NonIntegrated.idf b/testfiles/WaterSideEconomizer_NonIntegrated.idf index 97366915e07..c984355bc5c 100644 --- a/testfiles/WaterSideEconomizer_NonIntegrated.idf +++ b/testfiles/WaterSideEconomizer_NonIntegrated.idf @@ -2231,6 +2231,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2242,6 +2243,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2253,6 +2255,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2264,6 +2267,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2275,6 +2279,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/WaterSideEconomizer_PreCoolCoil.idf b/testfiles/WaterSideEconomizer_PreCoolCoil.idf index cfd91521a30..c1b440755d1 100644 --- a/testfiles/WaterSideEconomizer_PreCoolCoil.idf +++ b/testfiles/WaterSideEconomizer_PreCoolCoil.idf @@ -2315,6 +2315,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2326,6 +2327,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2337,6 +2339,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2348,6 +2351,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2359,6 +2363,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/WindACAirtoAir.idf b/testfiles/WindACAirtoAir.idf index 681ea98fa0c..494f7a6ca52 100644 --- a/testfiles/WindACAirtoAir.idf +++ b/testfiles/WindACAirtoAir.idf @@ -1554,6 +1554,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1563,6 +1564,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1572,6 +1574,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/WindACAuto.idf b/testfiles/WindACAuto.idf index 9b20cc60ef3..ee65ebc3d54 100644 --- a/testfiles/WindACAuto.idf +++ b/testfiles/WindACAuto.idf @@ -1557,6 +1557,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1566,6 +1567,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1575,6 +1577,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/WindACRHControl.idf b/testfiles/WindACRHControl.idf index 5092672e045..677d580f18b 100644 --- a/testfiles/WindACRHControl.idf +++ b/testfiles/WindACRHControl.idf @@ -1879,6 +1879,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Schedule; !- Control 1 Name @@ -1886,6 +1887,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Schedule; !- Control 1 Name @@ -1893,6 +1895,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Schedule; !- Control 1 Name diff --git a/testfiles/ZoneCoupledGroundHTBasement.idf b/testfiles/ZoneCoupledGroundHTBasement.idf index 9ff0e735c12..e264749acdd 100644 --- a/testfiles/ZoneCoupledGroundHTBasement.idf +++ b/testfiles/ZoneCoupledGroundHTBasement.idf @@ -654,6 +654,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledGroundHTSlabInGrade.idf b/testfiles/ZoneCoupledGroundHTSlabInGrade.idf index 038e01a39cc..57adc1c9eaa 100644 --- a/testfiles/ZoneCoupledGroundHTSlabInGrade.idf +++ b/testfiles/ZoneCoupledGroundHTSlabInGrade.idf @@ -474,6 +474,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledGroundHTSlabOnGrade.idf b/testfiles/ZoneCoupledGroundHTSlabOnGrade.idf index 324b3795142..8ac9d05cfa4 100644 --- a/testfiles/ZoneCoupledGroundHTSlabOnGrade.idf +++ b/testfiles/ZoneCoupledGroundHTSlabOnGrade.idf @@ -474,6 +474,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaBasement.idf b/testfiles/ZoneCoupledKivaBasement.idf index 4bb04b707ad..a29df9f2297 100644 --- a/testfiles/ZoneCoupledKivaBasement.idf +++ b/testfiles/ZoneCoupledKivaBasement.idf @@ -630,6 +630,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaBasementAdaptiveConvection.idf b/testfiles/ZoneCoupledKivaBasementAdaptiveConvection.idf index d7e33c1e674..e962ce032f5 100644 --- a/testfiles/ZoneCoupledKivaBasementAdaptiveConvection.idf +++ b/testfiles/ZoneCoupledKivaBasementAdaptiveConvection.idf @@ -742,6 +742,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaConvection.idf b/testfiles/ZoneCoupledKivaConvection.idf index ccb676c453f..bfbca4776e3 100644 --- a/testfiles/ZoneCoupledKivaConvection.idf +++ b/testfiles/ZoneCoupledKivaConvection.idf @@ -1893,6 +1893,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1902,6 +1903,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1911,6 +1913,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/ZoneCoupledKivaConvectionAdaptiveSmallOffice.idf b/testfiles/ZoneCoupledKivaConvectionAdaptiveSmallOffice.idf index 323c95793a4..93ac5058f41 100644 --- a/testfiles/ZoneCoupledKivaConvectionAdaptiveSmallOffice.idf +++ b/testfiles/ZoneCoupledKivaConvectionAdaptiveSmallOffice.idf @@ -2886,6 +2886,7 @@ Core_ZN Thermostat, !- Name Core_ZN, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_ZN DualSPSched; !- Control 1 Name @@ -2893,6 +2894,7 @@ Perimeter_ZN_1 Thermostat, !- Name Perimeter_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_1 DualSPSched; !- Control 1 Name @@ -2900,6 +2902,7 @@ Perimeter_ZN_2 Thermostat, !- Name Perimeter_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_2 DualSPSched; !- Control 1 Name @@ -2907,6 +2910,7 @@ Perimeter_ZN_3 Thermostat, !- Name Perimeter_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_3 DualSPSched; !- Control 1 Name @@ -2914,6 +2918,7 @@ Perimeter_ZN_4 Thermostat, !- Name Perimeter_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaRefBldgMediumOffice.idf b/testfiles/ZoneCoupledKivaRefBldgMediumOffice.idf index 3af35ac10f3..212eae9f0be 100644 --- a/testfiles/ZoneCoupledKivaRefBldgMediumOffice.idf +++ b/testfiles/ZoneCoupledKivaRefBldgMediumOffice.idf @@ -5956,6 +5956,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5963,6 +5964,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5970,6 +5972,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5977,6 +5980,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5984,6 +5988,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5991,6 +5996,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5998,6 +6004,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6005,6 +6012,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6012,6 +6020,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6019,6 +6028,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6026,6 +6036,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6033,6 +6044,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6040,6 +6052,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6047,6 +6060,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6054,6 +6068,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaRefBldgMediumOfficeNoClg.idf b/testfiles/ZoneCoupledKivaRefBldgMediumOfficeNoClg.idf index 3041f4ad2e8..2bf87a9044a 100644 --- a/testfiles/ZoneCoupledKivaRefBldgMediumOfficeNoClg.idf +++ b/testfiles/ZoneCoupledKivaRefBldgMediumOfficeNoClg.idf @@ -5956,6 +5956,7 @@ Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name @@ -5963,6 +5964,7 @@ Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name @@ -5970,6 +5972,7 @@ Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name @@ -5977,6 +5980,7 @@ Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name @@ -5984,6 +5988,7 @@ Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name @@ -5991,6 +5996,7 @@ Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name @@ -5998,6 +6004,7 @@ Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name @@ -6005,6 +6012,7 @@ Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name @@ -6012,6 +6020,7 @@ Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name @@ -6019,6 +6028,7 @@ Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name @@ -6026,6 +6036,7 @@ Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name @@ -6033,6 +6044,7 @@ Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name @@ -6040,6 +6052,7 @@ Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name @@ -6047,6 +6060,7 @@ Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name @@ -6054,6 +6068,7 @@ Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaSlab.idf b/testfiles/ZoneCoupledKivaSlab.idf index 53e5e36853f..1b4f5bde73b 100644 --- a/testfiles/ZoneCoupledKivaSlab.idf +++ b/testfiles/ZoneCoupledKivaSlab.idf @@ -456,6 +456,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneCoupledKivaWalkoutBasement.idf b/testfiles/ZoneCoupledKivaWalkoutBasement.idf index 4bcf40ccf56..399596a19b2 100644 --- a/testfiles/ZoneCoupledKivaWalkoutBasement.idf +++ b/testfiles/ZoneCoupledKivaWalkoutBasement.idf @@ -858,6 +858,7 @@ Main Floor Thermostat, !- Name Main Floor, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Always21 Dual SP Control;!- Control 1 Name diff --git a/testfiles/ZoneSysAvailManager.idf b/testfiles/ZoneSysAvailManager.idf index 001634a02a2..671f11f3886 100644 --- a/testfiles/ZoneSysAvailManager.idf +++ b/testfiles/ZoneSysAvailManager.idf @@ -605,6 +605,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ZoneVSWSHP_wDOAS.idf b/testfiles/ZoneVSWSHP_wDOAS.idf index 45b98ff5a5c..7fd6ccdc980 100644 --- a/testfiles/ZoneVSWSHP_wDOAS.idf +++ b/testfiles/ZoneVSWSHP_wDOAS.idf @@ -1091,6 +1091,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/ZoneWSHP_wDOAS.idf b/testfiles/ZoneWSHP_wDOAS.idf index 809b7f2ddb9..7b9a0a27342 100644 --- a/testfiles/ZoneWSHP_wDOAS.idf +++ b/testfiles/ZoneWSHP_wDOAS.idf @@ -600,6 +600,7 @@ Zone 1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Temperature Setpoints; !- Control 1 Name diff --git a/testfiles/_5ZoneAirCooled_LeapYear_annual.idf b/testfiles/_5ZoneAirCooled_LeapYear_annual.idf index 72797ebf9c6..a318362531f 100644 --- a/testfiles/_5ZoneAirCooled_LeapYear_annual.idf +++ b/testfiles/_5ZoneAirCooled_LeapYear_annual.idf @@ -2153,6 +2153,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2164,6 +2165,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2175,6 +2177,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2186,6 +2189,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2197,6 +2201,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_5ZoneAirCooled_annual.idf b/testfiles/_5ZoneAirCooled_annual.idf index d21344d74ce..b65ef6b39d9 100644 --- a/testfiles/_5ZoneAirCooled_annual.idf +++ b/testfiles/_5ZoneAirCooled_annual.idf @@ -2215,6 +2215,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2226,6 +2227,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2237,6 +2239,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2248,6 +2251,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2259,6 +2263,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_5ZoneEvapCooled.idf b/testfiles/_5ZoneEvapCooled.idf index 3ba193be281..33439ee5d53 100644 --- a/testfiles/_5ZoneEvapCooled.idf +++ b/testfiles/_5ZoneEvapCooled.idf @@ -2234,6 +2234,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2245,6 +2246,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2256,6 +2258,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2267,6 +2270,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2278,6 +2282,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_AllOffOpScheme.idf b/testfiles/_AllOffOpScheme.idf index eb73bb858f3..86a1a1acb7e 100644 --- a/testfiles/_AllOffOpScheme.idf +++ b/testfiles/_AllOffOpScheme.idf @@ -1988,6 +1988,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1997,6 +1998,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2006,6 +2008,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ConvCoefftest.idf b/testfiles/_ConvCoefftest.idf index 6f6f1c8f7d5..7ba6df29c30 100644 --- a/testfiles/_ConvCoefftest.idf +++ b/testfiles/_ConvCoefftest.idf @@ -391,6 +391,7 @@ Zone 1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type HeatCool Setpoints Set 1;!- Control 1 Name diff --git a/testfiles/_CoolingTowerDewPointRangeOp.idf b/testfiles/_CoolingTowerDewPointRangeOp.idf index a66e25fed98..68eff3dd7eb 100644 --- a/testfiles/_CoolingTowerDewPointRangeOp.idf +++ b/testfiles/_CoolingTowerDewPointRangeOp.idf @@ -2226,6 +2226,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2237,6 +2238,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2248,6 +2250,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2259,6 +2262,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2270,6 +2274,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_CoolingTowerWithDPDeltaTempOp.idf b/testfiles/_CoolingTowerWithDPDeltaTempOp.idf index d54616186cf..4098816287c 100644 --- a/testfiles/_CoolingTowerWithDPDeltaTempOp.idf +++ b/testfiles/_CoolingTowerWithDPDeltaTempOp.idf @@ -2251,6 +2251,7 @@ SPACE1-1 Control, !- Name SPACE1-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2262,6 +2263,7 @@ SPACE2-1 Control, !- Name SPACE2-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2273,6 +2275,7 @@ SPACE3-1 Control, !- Name SPACE3-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2284,6 +2287,7 @@ SPACE4-1 Control, !- Name SPACE4-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type @@ -2295,6 +2299,7 @@ SPACE5-1 Control, !- Name SPACE5-1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_CrashLights_9680.idf b/testfiles/_CrashLights_9680.idf index 0344d0ce84f..9d3728b5af6 100644 --- a/testfiles/_CrashLights_9680.idf +++ b/testfiles/_CrashLights_9680.idf @@ -161,6 +161,7 @@ Thermal Zone 1 Thermostat, !- Name Thermal Zone 1, !- Zone or ZoneList Name Thermal Zone 1 Thermostat Schedule, !- Control Type Schedule Name + 0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Thermostat Setpoint Dual Setpoint 1, !- Control 1 Name , !- Control 2 Object Type @@ -168,8 +169,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name Schedule:Compact, Thermal Zone 1 Thermostat Schedule, !- Name diff --git a/testfiles/_DOASDXCOIL_wUserSHRMethod.idf b/testfiles/_DOASDXCOIL_wUserSHRMethod.idf index 8ac5773dc31..5e2eac08e98 100644 --- a/testfiles/_DOASDXCOIL_wUserSHRMethod.idf +++ b/testfiles/_DOASDXCOIL_wUserSHRMethod.idf @@ -1789,6 +1789,7 @@ SPACE1-1 Thermostat, !- Name SPACE1-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -1895,6 +1896,7 @@ SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2001,6 +2003,7 @@ SPACE3-1 Thermostat, !- Name SPACE3-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2107,6 +2110,7 @@ SPACE4-1 Thermostat, !- Name SPACE4-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -2213,6 +2217,7 @@ SPACE5-1 Thermostat, !- Name SPACE5-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name diff --git a/testfiles/_DemandVentilationFixedRateAndHighPriority.idf b/testfiles/_DemandVentilationFixedRateAndHighPriority.idf index 2ed8867ca58..7ce7e132065 100644 --- a/testfiles/_DemandVentilationFixedRateAndHighPriority.idf +++ b/testfiles/_DemandVentilationFixedRateAndHighPriority.idf @@ -2107,6 +2107,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_DemandVentilationReductionRatioAndHighPriority.idf b/testfiles/_DemandVentilationReductionRatioAndHighPriority.idf index 9de0e08f2f5..94ec31b3a37 100644 --- a/testfiles/_DemandVentilationReductionRatioAndHighPriority.idf +++ b/testfiles/_DemandVentilationReductionRatioAndHighPriority.idf @@ -2107,6 +2107,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_DemandVentilationReductionRatioAndLowPriority.idf b/testfiles/_DemandVentilationReductionRatioAndLowPriority.idf index bec1d5d0096..c857b5db37a 100644 --- a/testfiles/_DemandVentilationReductionRatioAndLowPriority.idf +++ b/testfiles/_DemandVentilationReductionRatioAndLowPriority.idf @@ -2107,6 +2107,7 @@ AllControlledZones Thermostat, !- Name AllControlledZones, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleCooling, !- Control 1 Object Type CoolingSetPoint, !- Control 1 Name ThermostatSetpoint:SingleHeating, !- Control 2 Object Type diff --git a/testfiles/_DualDuctConstVolDamperMultizoneAverageSetPointManager.idf b/testfiles/_DualDuctConstVolDamperMultizoneAverageSetPointManager.idf index 191d6753afc..91eac909ae9 100644 --- a/testfiles/_DualDuctConstVolDamperMultizoneAverageSetPointManager.idf +++ b/testfiles/_DualDuctConstVolDamperMultizoneAverageSetPointManager.idf @@ -2014,6 +2014,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2021,6 +2022,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name @@ -2028,6 +2030,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type Heating Cooling Setpoint Sched; !- Control 1 Name diff --git a/testfiles/_ElectricASHRAE205Chiller.idf b/testfiles/_ElectricASHRAE205Chiller.idf index 44036ee26b1..b6e121ae8b2 100644 --- a/testfiles/_ElectricASHRAE205Chiller.idf +++ b/testfiles/_ElectricASHRAE205Chiller.idf @@ -1980,6 +1980,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1989,6 +1990,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1998,6 +2000,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ElectricREformulatedEIRChiller.idf b/testfiles/_ElectricREformulatedEIRChiller.idf index 1daae7af76d..57c246942a1 100644 --- a/testfiles/_ElectricREformulatedEIRChiller.idf +++ b/testfiles/_ElectricREformulatedEIRChiller.idf @@ -2054,6 +2054,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2063,6 +2064,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2072,6 +2074,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ExternalInterface-actuator.idf b/testfiles/_ExternalInterface-actuator.idf index d76a29368ce..7e072c1facc 100644 --- a/testfiles/_ExternalInterface-actuator.idf +++ b/testfiles/_ExternalInterface-actuator.idf @@ -1086,6 +1086,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1095,6 +1096,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1104,6 +1106,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ExternalInterface-functionalmockupunit-to-actuator.idf b/testfiles/_ExternalInterface-functionalmockupunit-to-actuator.idf index 7abcd0fd076..b4c7b21bea5 100644 --- a/testfiles/_ExternalInterface-functionalmockupunit-to-actuator.idf +++ b/testfiles/_ExternalInterface-functionalmockupunit-to-actuator.idf @@ -1094,6 +1094,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1103,6 +1104,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1112,6 +1114,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ExternalInterface-functionalmockupunit-to-variable.idf b/testfiles/_ExternalInterface-functionalmockupunit-to-variable.idf index 525c3425e26..d1e4c6ca7f3 100644 --- a/testfiles/_ExternalInterface-functionalmockupunit-to-variable.idf +++ b/testfiles/_ExternalInterface-functionalmockupunit-to-variable.idf @@ -1094,6 +1094,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1103,6 +1104,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1112,6 +1114,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ExternalInterface-schedule.idf b/testfiles/_ExternalInterface-schedule.idf index d7c1c31396f..d86c150195d 100644 --- a/testfiles/_ExternalInterface-schedule.idf +++ b/testfiles/_ExternalInterface-schedule.idf @@ -2755,6 +2755,7 @@ South zone1, !- Name ZSF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2762,6 +2763,7 @@ North zone1, !- Name ZNF1, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2769,6 +2771,7 @@ South zone2, !- Name ZSF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -2776,6 +2779,7 @@ North zone2, !- Name ZNF2, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/_ExternalInterface-variable.idf b/testfiles/_ExternalInterface-variable.idf index 24dff701042..2c19623ba2b 100644 --- a/testfiles/_ExternalInterface-variable.idf +++ b/testfiles/_ExternalInterface-variable.idf @@ -1086,6 +1086,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1095,6 +1096,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1104,6 +1106,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_FanCoilHybridVentAFN.idf b/testfiles/_FanCoilHybridVentAFN.idf index b94f454ae41..ca5f4d9782f 100644 --- a/testfiles/_FanCoilHybridVentAFN.idf +++ b/testfiles/_FanCoilHybridVentAFN.idf @@ -3139,6 +3139,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3146,6 +3147,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3153,6 +3155,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/_FollowSysNodeTemp.idf b/testfiles/_FollowSysNodeTemp.idf index f5ebb45df79..70eef35d5b5 100644 --- a/testfiles/_FollowSysNodeTemp.idf +++ b/testfiles/_FollowSysNodeTemp.idf @@ -2017,6 +2017,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2026,6 +2027,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -2035,6 +2037,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_FuelCellTest200.idf b/testfiles/_FuelCellTest200.idf index 80c0a365e0d..d20c634c961 100644 --- a/testfiles/_FuelCellTest200.idf +++ b/testfiles/_FuelCellTest200.idf @@ -175,6 +175,7 @@ Garage Zone Thermostat, !- Name GARAGE ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Tight setpoint; !- Control 1 Name diff --git a/testfiles/_HybridVentilationControlGlobalAN.idf b/testfiles/_HybridVentilationControlGlobalAN.idf index 8c10934f60d..3d75befed6c 100644 --- a/testfiles/_HybridVentilationControlGlobalAN.idf +++ b/testfiles/_HybridVentilationControlGlobalAN.idf @@ -3117,6 +3117,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3124,6 +3125,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3131,6 +3133,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/_HybridVentilationControl_MinTime.idf b/testfiles/_HybridVentilationControl_MinTime.idf index fe07674766a..6e2b1986d9b 100644 --- a/testfiles/_HybridVentilationControl_MinTime.idf +++ b/testfiles/_HybridVentilationControl_MinTime.idf @@ -3117,6 +3117,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3124,6 +3125,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name @@ -3131,6 +3133,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/testfiles/_MicroCHPTest301.idf b/testfiles/_MicroCHPTest301.idf index 994c9405014..d6efaab57e1 100644 --- a/testfiles/_MicroCHPTest301.idf +++ b/testfiles/_MicroCHPTest301.idf @@ -169,6 +169,7 @@ Garage Zone Thermostat, !- Name GARAGE ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Tight setpoint; !- Control 1 Name diff --git a/testfiles/_MultiSpeedACElecFurnace.idf b/testfiles/_MultiSpeedACElecFurnace.idf index 3f87dbd7b48..d1e46d85b1b 100644 --- a/testfiles/_MultiSpeedACElecFurnace.idf +++ b/testfiles/_MultiSpeedACElecFurnace.idf @@ -1158,6 +1158,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_PurchAirWindowBlind2.idf b/testfiles/_PurchAirWindowBlind2.idf index 9c4b7dd80c6..a3cd0c5fcba 100644 --- a/testfiles/_PurchAirWindowBlind2.idf +++ b/testfiles/_PurchAirWindowBlind2.idf @@ -1058,6 +1058,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1067,6 +1068,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1076,6 +1078,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_PurchAirWindowBlind3.idf b/testfiles/_PurchAirWindowBlind3.idf index 9995f131ceb..0167b077998 100644 --- a/testfiles/_PurchAirWindowBlind3.idf +++ b/testfiles/_PurchAirWindowBlind3.idf @@ -1058,6 +1058,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1067,6 +1068,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1076,6 +1078,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_PurchAirWindowBlind4.idf b/testfiles/_PurchAirWindowBlind4.idf index f918a19628d..51e515e5b8d 100644 --- a/testfiles/_PurchAirWindowBlind4.idf +++ b/testfiles/_PurchAirWindowBlind4.idf @@ -1058,6 +1058,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1067,6 +1068,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1076,6 +1078,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/testfiles/_ResidentialBase.idf b/testfiles/_ResidentialBase.idf index f0319a48284..85075f51f96 100644 --- a/testfiles/_ResidentialBase.idf +++ b/testfiles/_ResidentialBase.idf @@ -6340,6 +6340,7 @@ conditioned space Thermostat, !- Name conditioned space, !- Zone or ZoneList Name conditioned space Thermostat Schedule, !- Control Type Schedule Name + 0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type conditioned space temperature setpoint, !- Control 1 Name , !- Control 2 Object Type @@ -6347,8 +6348,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name !- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT =========== diff --git a/testfiles/_ResidentialBaseboardHardSize.idf b/testfiles/_ResidentialBaseboardHardSize.idf index 183939cd709..0fdcb996ea1 100644 --- a/testfiles/_ResidentialBaseboardHardSize.idf +++ b/testfiles/_ResidentialBaseboardHardSize.idf @@ -5483,6 +5483,7 @@ conditioned space Thermostat, !- Name conditioned space, !- Zone or ZoneList Name conditioned space Thermostat Schedule, !- Control Type Schedule Name + 0, !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type conditioned space temperature setpoint, !- Control 1 Name , !- Control 2 Object Type @@ -5490,8 +5491,7 @@ , !- Control 3 Object Type , !- Control 3 Name , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + ; !- Control 4 Name !- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:DUALSETPOINT =========== diff --git a/testfiles/_SingleZoneTestCTFTwoDD.idf b/testfiles/_SingleZoneTestCTFTwoDD.idf index 175ba57d102..475e05badd8 100644 --- a/testfiles/_SingleZoneTestCTFTwoDD.idf +++ b/testfiles/_SingleZoneTestCTFTwoDD.idf @@ -2466,6 +2466,7 @@ SouthZone-Thermostat, !- Name SouthZone, !- Zone or ZoneList Name SouthZone-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SouthZone-Heating Setpoint with SB; !- Control 1 Name diff --git a/testfiles/_SingleZoneTestCondFDTwoDD.idf b/testfiles/_SingleZoneTestCondFDTwoDD.idf index 5093b3f8a86..6569f808bc9 100644 --- a/testfiles/_SingleZoneTestCondFDTwoDD.idf +++ b/testfiles/_SingleZoneTestCondFDTwoDD.idf @@ -2460,6 +2460,7 @@ SouthZone-Thermostat, !- Name SouthZone, !- Zone or ZoneList Name SouthZone-Control Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type SouthZone-Heating Setpoint with SB; !- Control 1 Name diff --git a/testfiles/_SmallOffice_Dulles.idf b/testfiles/_SmallOffice_Dulles.idf index 9c051f36043..3a34f84c918 100644 --- a/testfiles/_SmallOffice_Dulles.idf +++ b/testfiles/_SmallOffice_Dulles.idf @@ -3153,6 +3153,7 @@ Thermostat_SouthZone_1stFloor, !- Name SouthZone_1stFloor, !- Zone or ZoneList Name Zone Control Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3160,6 +3161,7 @@ Thermostat_NorthZone_1stFloor, !- Name NorthZone_1stFloor, !- Zone or ZoneList Name Zone Control Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3167,6 +3169,7 @@ Thermostat_SouthZone_2ndFloor, !- Name SouthZone_2ndFloor, !- Zone or ZoneList Name Zone Control Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name @@ -3174,6 +3177,7 @@ Thermostat_NorthZone_2ndFloor, !- Name NorthZone_2ndFloor, !- Zone or ZoneList Name Zone Control Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type DualSetPoint; !- Control 1 Name diff --git a/testfiles/_VAVSingleDuctConstFlowBoiler_otherfuel.idf b/testfiles/_VAVSingleDuctConstFlowBoiler_otherfuel.idf index bcb217c00ac..8a57ef93502 100644 --- a/testfiles/_VAVSingleDuctConstFlowBoiler_otherfuel.idf +++ b/testfiles/_VAVSingleDuctConstFlowBoiler_otherfuel.idf @@ -2034,6 +2034,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2041,6 +2042,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name @@ -2048,6 +2050,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type VAV Setpoints; !- Control 1 Name diff --git a/testfiles/gasAbsorptionChillerHeater.idf b/testfiles/gasAbsorptionChillerHeater.idf index d56c04125a7..b2fa363ace9 100644 --- a/testfiles/gasAbsorptionChillerHeater.idf +++ b/testfiles/gasAbsorptionChillerHeater.idf @@ -1888,6 +1888,7 @@ Zone 1 Thermostat, !- Name West Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1897,6 +1898,7 @@ Zone 2 Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type @@ -1906,6 +1908,7 @@ Zone 3 Thermostat, !- Name NORTH ZONE, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:SingleHeating, !- Control 1 Object Type Heating Setpoint with SB,!- Control 1 Name ThermostatSetpoint:SingleCooling, !- Control 2 Object Type diff --git a/tst/EnergyPlus/unit/AirLoopHVACDOAS.unit.cc b/tst/EnergyPlus/unit/AirLoopHVACDOAS.unit.cc index 0d393eb6bc6..8f5d18e6f52 100644 --- a/tst/EnergyPlus/unit/AirLoopHVACDOAS.unit.cc +++ b/tst/EnergyPlus/unit/AirLoopHVACDOAS.unit.cc @@ -2554,6 +2554,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOASTest) " Core_ZN Thermostat, !- Name", " Core_ZN, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_ZN DualSPSched; !- Control 1 Name", @@ -2561,6 +2562,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOASTest) " Perimeter_ZN_1 Thermostat, !- Name", " Perimeter_ZN_1, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_1 DualSPSched; !- Control 1 Name", @@ -2568,6 +2570,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOASTest) " Perimeter_ZN_2 Thermostat, !- Name", " Perimeter_ZN_2, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_2 DualSPSched; !- Control 1 Name", @@ -2575,6 +2578,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOASTest) " Perimeter_ZN_3 Thermostat, !- Name", " Perimeter_ZN_3, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_3 DualSPSched; !- Control 1 Name", @@ -2582,6 +2586,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOASTest) " Perimeter_ZN_4 Thermostat, !- Name", " Perimeter_ZN_4, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_4 DualSPSched; !- Control 1 Name", @@ -6961,6 +6966,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_ReportVariableResetTest) " Core_ZN Thermostat, !- Name", " Core_ZN, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_ZN DualSPSched; !- Control 1 Name", @@ -6968,6 +6974,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_ReportVariableResetTest) " Perimeter_ZN_1 Thermostat, !- Name", " Perimeter_ZN_1, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_1 DualSPSched; !- Control 1 Name", @@ -6975,6 +6982,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_ReportVariableResetTest) " Perimeter_ZN_2 Thermostat, !- Name", " Perimeter_ZN_2, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_2 DualSPSched; !- Control 1 Name", @@ -6982,6 +6990,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_ReportVariableResetTest) " Perimeter_ZN_3 Thermostat, !- Name", " Perimeter_ZN_3, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_3 DualSPSched; !- Control 1 Name", @@ -6989,6 +6998,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_ReportVariableResetTest) " Perimeter_ZN_4 Thermostat, !- Name", " Perimeter_ZN_4, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Perimeter_ZN_4 DualSPSched; !- Control 1 Name", @@ -9506,6 +9516,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_TestFanHeatAddeToCoolingCoilSize) " Core_ZN Thermostat, !- Name", " Core_ZN, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_ZN DualSPSched; !- Control 1 Name", @@ -11075,6 +11086,7 @@ TEST_F(EnergyPlusFixture, AirLoopHVACDOAS_TestFanDrawThroughPlacement) " Core_ZN Thermostat, !- Name", " Core_ZN, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_ZN DualSPSched; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/AirTerminalSingleDuctPIUReheat.unit.cc b/tst/EnergyPlus/unit/AirTerminalSingleDuctPIUReheat.unit.cc index 7d80d04c5f1..146635f23cc 100644 --- a/tst/EnergyPlus/unit/AirTerminalSingleDuctPIUReheat.unit.cc +++ b/tst/EnergyPlus/unit/AirTerminalSingleDuctPIUReheat.unit.cc @@ -1057,6 +1057,7 @@ TEST_F(EnergyPlusFixture, AirTerminalSingleDuctSeriesPIU_SimTest) " Thermal Zone 1 Thermostat, !- Name", " Thermal Zone 1, !- Zone or ZoneList Name", " Thermal Zone 1 Thermostat Schedule, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Thermal Zone 1 Thermostat; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/AirflowNetworkComponents.unit.cc b/tst/EnergyPlus/unit/AirflowNetworkComponents.unit.cc index 143d57e34f0..5d09ba64acf 100644 --- a/tst/EnergyPlus/unit/AirflowNetworkComponents.unit.cc +++ b/tst/EnergyPlus/unit/AirflowNetworkComponents.unit.cc @@ -1719,6 +1719,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_UserDefinedDuctViewFactors) " Zone Thermostat, !- Name", " OCCUPIED ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -4289,6 +4290,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_TestFanModel) " Zone Thermostat, !- Name", " LIVING ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/AirflowNetworkHVAC.unit.cc b/tst/EnergyPlus/unit/AirflowNetworkHVAC.unit.cc index 644a8341ba8..9cd20506b0e 100644 --- a/tst/EnergyPlus/unit/AirflowNetworkHVAC.unit.cc +++ b/tst/EnergyPlus/unit/AirflowNetworkHVAC.unit.cc @@ -5362,6 +5362,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_MultiAirLoopTest) " Zone 1 Thermostat, !- Name", " West Zone, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -5369,6 +5370,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_MultiAirLoopTest) " Zone 2 Thermostat, !- Name", " EAST ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -5447,6 +5449,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_MultiAirLoopTest) " Zone 3 Thermostat, !- Name", " NORTH ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -7920,6 +7923,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_DuplicatedNodeNameTest) " Zone Thermostat, !- Name", " OCCUPIED ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -10757,6 +10761,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_SenLatLoadsConservation_Test) // " Zone 1 Thermostat, !- Name", // " West Zone, !- Zone or ZoneList Name", // " Dual Zone Control Type Sched, !- Control Type Schedule Name", +// " , !- Temperature Difference Between Cutout And Setpoint", // " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", // " Setpoints; !- Control 1 Name", // @@ -10764,6 +10769,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_SenLatLoadsConservation_Test) // " Zone 2 Thermostat, !- Name", // " EAST ZONE, !- Zone or ZoneList Name", // " Dual Zone Control Type Sched, !- Control Type Schedule Name", +// " , !- Temperature Difference Between Cutout And Setpoint", // " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", // " Setpoints; !- Control 1 Name", // @@ -14376,6 +14382,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_TestIntraZoneLinkageZoneIndex) " NORTH_ZONE Thermostat, !- Name", " NORTH_ZONE, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -16555,6 +16562,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_DuctSizingTest) " Zone Thermostat, !- Name", " LIVING ZONE, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -19470,6 +19478,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_ZoneOrderTest) " Zone Thermostat_unit1, !- Name", " living_unit1, !- Zone or ZoneList Name", " zone_control_type, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " thermostat_living Dual SP Control; !- Control 1 Name", @@ -21119,6 +21128,7 @@ TEST_F(EnergyPlusFixture, AirflowNetwork_MultizoneWithoutDistributionAndFan) " Zone Thermostat_unit1, !- Name", " living_unit1, !- Zone or ZoneList Name", " zone_control_type, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " thermostat_living Dual SP Control; !- Control 1 Name", " AirflowNetwork:MultiZone:Zone,", diff --git a/tst/EnergyPlus/unit/Autosizing/BaseClassSizing.unit.cc b/tst/EnergyPlus/unit/Autosizing/BaseClassSizing.unit.cc index e1136567aeb..e503278455c 100644 --- a/tst/EnergyPlus/unit/Autosizing/BaseClassSizing.unit.cc +++ b/tst/EnergyPlus/unit/Autosizing/BaseClassSizing.unit.cc @@ -1293,6 +1293,7 @@ TEST_F(EnergyPlusFixture, BaseSizer_SupplyAirTempLessThanZoneTStatTest) " Zone Thermostat, !- Name", " ZONE ONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Temperature Setpoints; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/BranchNodeConnections.unit.cc b/tst/EnergyPlus/unit/BranchNodeConnections.unit.cc index 0ee5fe52888..f447f0eed86 100644 --- a/tst/EnergyPlus/unit/BranchNodeConnections.unit.cc +++ b/tst/EnergyPlus/unit/BranchNodeConnections.unit.cc @@ -606,6 +606,7 @@ TEST_F(EnergyPlusFixture, BranchNodeConnections_ReturnPlenumNodeCheckFailure) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -613,6 +614,7 @@ TEST_F(EnergyPlusFixture, BranchNodeConnections_ReturnPlenumNodeCheckFailure) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -1627,6 +1629,7 @@ TEST_F(EnergyPlusFixture, BranchNodeConnections_ReturnPlenumNodeCheck) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -1634,6 +1637,7 @@ TEST_F(EnergyPlusFixture, BranchNodeConnections_ReturnPlenumNodeCheck) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/ChillerAbsorption.unit.cc b/tst/EnergyPlus/unit/ChillerAbsorption.unit.cc index 9372a6da80b..fc84e7c7b4a 100644 --- a/tst/EnergyPlus/unit/ChillerAbsorption.unit.cc +++ b/tst/EnergyPlus/unit/ChillerAbsorption.unit.cc @@ -1368,6 +1368,7 @@ TEST_F(EnergyPlusFixture, ChillerAbsorption_Calc) " Zone 1 Thermostat, !- Name", " West Zone, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/DataHeatBalance.unit.cc b/tst/EnergyPlus/unit/DataHeatBalance.unit.cc index addbe9754b7..a05132f95be 100644 --- a/tst/EnergyPlus/unit/DataHeatBalance.unit.cc +++ b/tst/EnergyPlus/unit/DataHeatBalance.unit.cc @@ -629,6 +629,7 @@ TEST_F(EnergyPlusFixture, DataHeatBalance_CheckConstructLayers) " Zone 1 Thermostat, !- Name", " West Zone, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/DesiccantDehumidifiers.unit.cc b/tst/EnergyPlus/unit/DesiccantDehumidifiers.unit.cc index 465b1dcd29b..9e4d90794cd 100644 --- a/tst/EnergyPlus/unit/DesiccantDehumidifiers.unit.cc +++ b/tst/EnergyPlus/unit/DesiccantDehumidifiers.unit.cc @@ -2496,6 +2496,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_OnOASystemTest) " SPACE1-1 Control, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " CoolingSetPoint, !- Control 1 Name", " ThermostatSetpoint:SingleHeating, !- Control 2 Object Type", @@ -2507,6 +2508,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_OnOASystemTest) " SPACE2-1 Control, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " CoolingSetPoint, !- Control 1 Name", " ThermostatSetpoint:SingleHeating, !- Control 2 Object Type", @@ -2518,6 +2520,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_OnOASystemTest) " SPACE3-1 Control, !- Name", " SPACE3-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " CoolingSetPoint, !- Control 1 Name", " ThermostatSetpoint:SingleHeating, !- Control 2 Object Type", @@ -2529,6 +2532,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_OnOASystemTest) " SPACE4-1 Control, !- Name", " SPACE4-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " CoolingSetPoint, !- Control 1 Name", " ThermostatSetpoint:SingleHeating, !- Control 2 Object Type", @@ -3844,6 +3848,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_OnPrimaryAirSystemTest) " Main Zone Control, !- Name", " Main Zone, !- Zone or ZoneList Name", " Desiccant Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", @@ -5030,6 +5035,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_RegenAirHeaterHWCoilSizingTest) " Main Zone Control, !- Name", " Main Zone, !- Zone or ZoneList Name", " Desiccant Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", @@ -6462,6 +6468,7 @@ TEST_F(EnergyPlusFixture, DesiccantDehum_VSCoolingCoilOnPrimaryAirSystemTest) " Main Zone Control, !- Name", " Main Zone, !- Zone or ZoneList Name", " Desiccant Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/DuctLoss.unit.cc b/tst/EnergyPlus/unit/DuctLoss.unit.cc index 9f1fa85170a..332a9074c21 100644 --- a/tst/EnergyPlus/unit/DuctLoss.unit.cc +++ b/tst/EnergyPlus/unit/DuctLoss.unit.cc @@ -1685,6 +1685,7 @@ TEST_F(EnergyPlusFixture, DuctLoss_test) Zone Thermostat, !- Name LIVING ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint", ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Setpoints; !- Control 1 Name diff --git a/tst/EnergyPlus/unit/Furnaces.unit.cc b/tst/EnergyPlus/unit/Furnaces.unit.cc index 436e71322d2..77469ec1400 100644 --- a/tst/EnergyPlus/unit/Furnaces.unit.cc +++ b/tst/EnergyPlus/unit/Furnaces.unit.cc @@ -1097,6 +1097,7 @@ TEST_F(EnergyPlusFixture, UnitaryHeatPumpAirToAir_MaxSuppAirTempTest) " Zone 2 Thermostat, !- Name", " EAST ZONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -1838,6 +1839,7 @@ TEST_F(EnergyPlusFixture, UnitaryHeatCool_AFN_RTF) " Zone 2 Thermostat, !- Name", " EAST ZONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/HVACFourPipeBeam.unit.cc b/tst/EnergyPlus/unit/HVACFourPipeBeam.unit.cc index 0b7685ea8d5..3dc0b7161c4 100644 --- a/tst/EnergyPlus/unit/HVACFourPipeBeam.unit.cc +++ b/tst/EnergyPlus/unit/HVACFourPipeBeam.unit.cc @@ -763,6 +763,7 @@ TEST_F(EnergyPlusFixture, Beam_sizeandSimulateOneZone) " Zone One Thermostat, !- Name", " Zone One, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Zone One DualSPSched; !- Control 1 Name", @@ -2334,6 +2335,7 @@ TEST_F(EnergyPlusFixture, Beam_fatalWhenSysSizingOff) " Zone One Thermostat, !- Name", " Zone One, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Zone One DualSPSched; !- Control 1 Name", @@ -3823,6 +3825,7 @@ TEST_F(EnergyPlusFixture, Beam_sizeandSimulateHighOA) " Zone One Thermostat, !- Name", " Zone One, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Zone One DualSPSched; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/HVACMultiSpeedHeatPump.unit.cc b/tst/EnergyPlus/unit/HVACMultiSpeedHeatPump.unit.cc index a0921765941..022c964a04c 100644 --- a/tst/EnergyPlus/unit/HVACMultiSpeedHeatPump.unit.cc +++ b/tst/EnergyPlus/unit/HVACMultiSpeedHeatPump.unit.cc @@ -111,6 +111,7 @@ TEST_F(EnergyPlusFixture, HVACMultiSpeedHeatPump_ReportVariableInitTest) " Z401TempCtrl, !- Name", " 401, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 3 Object Type", " DualSetPoint1; !- Control 3 Name", @@ -123,6 +124,7 @@ TEST_F(EnergyPlusFixture, HVACMultiSpeedHeatPump_ReportVariableInitTest) " Z402TempCtrl, !- Name", " 402, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 3 Object Type", " DualSetPoint2; !- Control 3 Name", @@ -1534,6 +1536,7 @@ TEST_F(EnergyPlusFixture, HVACMSHP_UnitarySystemElectricityRateTest) " Z401TempCtrl, !- Name", " 401, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 3 Object Type", " DualSetPoint1; !- Control 3 Name", diff --git a/tst/EnergyPlus/unit/HVACUnitaryBypassVAV.unit.cc b/tst/EnergyPlus/unit/HVACUnitaryBypassVAV.unit.cc index 6638ab84ae0..2408b354e6f 100644 --- a/tst/EnergyPlus/unit/HVACUnitaryBypassVAV.unit.cc +++ b/tst/EnergyPlus/unit/HVACUnitaryBypassVAV.unit.cc @@ -379,6 +379,7 @@ TEST_F(EnergyPlusFixture, UnitaryBypassVAV_GetInputZoneEquipment) " Zone Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Setpoints; !- Control 1 Name", @@ -1304,6 +1305,7 @@ TEST_F(EnergyPlusFixture, UnitaryBypassVAV_ParentElectricityRateTest) " Zone 1 Thermostat, !- Name", " West ZONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Temperature Setpoints; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/HVACVariableRefrigerantFlow.unit.cc b/tst/EnergyPlus/unit/HVACVariableRefrigerantFlow.unit.cc index 1b4c7daf313..001afd72dd0 100644 --- a/tst/EnergyPlus/unit/HVACVariableRefrigerantFlow.unit.cc +++ b/tst/EnergyPlus/unit/HVACVariableRefrigerantFlow.unit.cc @@ -11043,6 +11043,7 @@ TEST_F(EnergyPlusFixture, VRFFluidControl_FanSysModel_OnOffModeTest) " SPACE1-1 Control, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", @@ -24466,6 +24467,7 @@ TEST_F(EnergyPlusFixture, VRF_MultispeedFan_Test) " SPACE1-1 Control, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", @@ -25781,6 +25783,7 @@ TEST_F(EnergyPlusFixture, VRF_MultispeedFan_Test_HardSized) " SPACE1-1 Control, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " DualSetPoint; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/HeatBalanceKivaManager.unit.cc b/tst/EnergyPlus/unit/HeatBalanceKivaManager.unit.cc index 1289ccbdf81..6cb914d22fd 100644 --- a/tst/EnergyPlus/unit/HeatBalanceKivaManager.unit.cc +++ b/tst/EnergyPlus/unit/HeatBalanceKivaManager.unit.cc @@ -140,6 +140,7 @@ TEST_F(EnergyPlusFixture, HeatBalanceKiva_SetInitialBCs) " Core_bottom Thermostat, !- Name", " Core_bottom, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_bottom DualSPSched; !- Control 1 Name", " ", @@ -556,6 +557,7 @@ TEST_F(EnergyPlusFixture, HeatBalanceKiva_setupKivaInstances_ThermalComfort) " Core_bottom Thermostat, !- Name", " Core_bottom, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_bottom DualSPSched; !- Control 1 Name", " ", diff --git a/tst/EnergyPlus/unit/HeatBalanceSurfaceManager.unit.cc b/tst/EnergyPlus/unit/HeatBalanceSurfaceManager.unit.cc index e8957ed5ef4..8058f19ef5f 100644 --- a/tst/EnergyPlus/unit/HeatBalanceSurfaceManager.unit.cc +++ b/tst/EnergyPlus/unit/HeatBalanceSurfaceManager.unit.cc @@ -1133,6 +1133,7 @@ TEST_F(EnergyPlusFixture, HeatBalanceSurfaceManager_TestSurfTempCalcHeatBalanceI " Core_bottom Thermostat, !- Name", " Core_bottom, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_bottom DualSPSched; !- Control 1 Name", " ", diff --git a/tst/EnergyPlus/unit/HeatRecovery.unit.cc b/tst/EnergyPlus/unit/HeatRecovery.unit.cc index 923430ddb1d..4d5a11c00ab 100644 --- a/tst/EnergyPlus/unit/HeatRecovery.unit.cc +++ b/tst/EnergyPlus/unit/HeatRecovery.unit.cc @@ -2392,6 +2392,7 @@ TEST_F(EnergyPlusFixture, HeatRecoveryHXOnMainBranch_SimHeatRecoveryTest) " SPACE1-1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -2399,6 +2400,7 @@ TEST_F(EnergyPlusFixture, HeatRecoveryHXOnMainBranch_SimHeatRecoveryTest) " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -2406,6 +2408,7 @@ TEST_F(EnergyPlusFixture, HeatRecoveryHXOnMainBranch_SimHeatRecoveryTest) " SPACE3-1 Thermostat, !- Name", " SPACE3-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -2413,6 +2416,7 @@ TEST_F(EnergyPlusFixture, HeatRecoveryHXOnMainBranch_SimHeatRecoveryTest) " SPACE4-1 Thermostat, !- Name", " SPACE4-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -2420,6 +2424,7 @@ TEST_F(EnergyPlusFixture, HeatRecoveryHXOnMainBranch_SimHeatRecoveryTest) " SPACE5-1 Thermostat, !- Name", " SPACE5-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/MixedAir.unit.cc b/tst/EnergyPlus/unit/MixedAir.unit.cc index 1fb726b0f2d..0da611c3fb8 100644 --- a/tst/EnergyPlus/unit/MixedAir.unit.cc +++ b/tst/EnergyPlus/unit/MixedAir.unit.cc @@ -4456,6 +4456,7 @@ TEST_F(EnergyPlusFixture, MixedAir_MiscGetsPart2) " SPACE1-1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -4463,6 +4464,7 @@ TEST_F(EnergyPlusFixture, MixedAir_MiscGetsPart2) " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -4470,6 +4472,7 @@ TEST_F(EnergyPlusFixture, MixedAir_MiscGetsPart2) " SPACE3-1 Thermostat, !- Name", " SPACE3-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -4477,6 +4480,7 @@ TEST_F(EnergyPlusFixture, MixedAir_MiscGetsPart2) " SPACE4-1 Thermostat, !- Name", " SPACE4-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -4484,6 +4488,7 @@ TEST_F(EnergyPlusFixture, MixedAir_MiscGetsPart2) " SPACE5-1 Thermostat, !- Name", " SPACE5-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/OASystemHWPreheatCoil.unit.cc b/tst/EnergyPlus/unit/OASystemHWPreheatCoil.unit.cc index ac92d369ea0..c60fae22bd6 100644 --- a/tst/EnergyPlus/unit/OASystemHWPreheatCoil.unit.cc +++ b/tst/EnergyPlus/unit/OASystemHWPreheatCoil.unit.cc @@ -494,6 +494,7 @@ TEST_F(EnergyPlusFixture, OASystem_HotWaterPreheatCoilScheduledOffSim) " Zone 1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Temperature Setpoints; !- Control 1 Name", @@ -1485,6 +1486,7 @@ TEST_F(EnergyPlusFixture, OASystem_HotWaterPreheatCoilScheduledOnSim) " Zone 1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Temperature Setpoints; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/OccupantDiversity.unit.cc b/tst/EnergyPlus/unit/OccupantDiversity.unit.cc index 8f919deb8d9..8ca332ac658 100644 --- a/tst/EnergyPlus/unit/OccupantDiversity.unit.cc +++ b/tst/EnergyPlus/unit/OccupantDiversity.unit.cc @@ -473,6 +473,7 @@ TEST_F(EnergyPlusFixture, OccupantDiversityManualTest) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -480,6 +481,7 @@ TEST_F(EnergyPlusFixture, OccupantDiversityManualTest) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1485,6 +1487,7 @@ TEST_F(EnergyPlusFixture, OccupantDiversityAutoSizeTest) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1492,6 +1495,7 @@ TEST_F(EnergyPlusFixture, OccupantDiversityAutoSizeTest) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", diff --git a/tst/EnergyPlus/unit/OutputReportTabular.unit.cc b/tst/EnergyPlus/unit/OutputReportTabular.unit.cc index 613008bc236..926229ec09e 100644 --- a/tst/EnergyPlus/unit/OutputReportTabular.unit.cc +++ b/tst/EnergyPlus/unit/OutputReportTabular.unit.cc @@ -1205,6 +1205,7 @@ TEST_F(EnergyPlusFixture, OutputReportTabular_ZoneMultiplierTest) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1212,6 +1213,7 @@ TEST_F(EnergyPlusFixture, OutputReportTabular_ZoneMultiplierTest) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1897,6 +1899,7 @@ TEST_F(EnergyPlusFixture, AirloopHVAC_ZoneSumTest) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -1904,6 +1907,7 @@ TEST_F(EnergyPlusFixture, AirloopHVAC_ZoneSumTest) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -2879,6 +2883,7 @@ TEST_F(EnergyPlusFixture, AirloopHVAC_ZoneSumTest) //" Space Thermostat, !- Name", //" Space, !- Zone or ZoneList Name", //" Dual Zone Control Type Sched, !- Control Type Schedule Name", +//" , !- Temperature Difference Between Cutout And Setpoint", //" ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", //" Space DualSPSched; !- Control 1 Name", @@ -2886,6 +2891,7 @@ TEST_F(EnergyPlusFixture, AirloopHVAC_ZoneSumTest) //" Spacex10 Thermostat, !- Name", //" Spacex10, !- Zone or ZoneList Name", //" Dual Zone Control Type Sched, !- Control Type Schedule Name", +//" , !- Temperature Difference Between Cutout And Setpoint", //" ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", //" Space DualSPSched; !- Control 1 Name", @@ -9316,15 +9322,9 @@ TEST_F(SQLiteFixture, DOASDirectToZone_ZoneMultiplierRemoved) Test Zone Thermostat, !- Name Test Zone, !- Zone or ZoneList Name Test Zone Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type - DualThermostat, !- Control 1 Name - , !- Control 2 Object Type - , !- Control 2 Name - , !- Control 3 Object Type - , !- Control 3 Name - , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + DualThermostat; !- Control 1 Name Schedule:Compact, Test Zone Thermostat Schedule, !- Name @@ -10157,15 +10157,9 @@ TEST_F(SQLiteFixture, UpdateSizing_EndSysSizingCalc) Thermal Zone one Thermostat, !- Name Thermal Zone one, !- Zone or ZoneList Name Thermal Zone one Thermostat Schedule, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint {deltaC} ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type - DualThermostat, !- Control 1 Name - , !- Control 2 Object Type - , !- Control 2 Name - , !- Control 3 Object Type - , !- Control 3 Name - , !- Control 4 Object Type - , !- Control 4 Name - 0; !- Temperature Difference Between Cutout And Setpoint {deltaC} + DualThermostat; !- Control 1 Name Schedule:Compact, Thermal Zone one Thermostat Schedule, !- Name diff --git a/tst/EnergyPlus/unit/PackagedTerminalHeatPump.unit.cc b/tst/EnergyPlus/unit/PackagedTerminalHeatPump.unit.cc index e95d2abe939..36b70b6324d 100644 --- a/tst/EnergyPlus/unit/PackagedTerminalHeatPump.unit.cc +++ b/tst/EnergyPlus/unit/PackagedTerminalHeatPump.unit.cc @@ -3040,6 +3040,7 @@ TEST_F(EnergyPlusFixture, PTACDrawAirfromReturnNodeAndPlenum_Test) " SPACE1-1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -3047,6 +3048,7 @@ TEST_F(EnergyPlusFixture, PTACDrawAirfromReturnNodeAndPlenum_Test) " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -3054,6 +3056,7 @@ TEST_F(EnergyPlusFixture, PTACDrawAirfromReturnNodeAndPlenum_Test) " SPACE3-1 Thermostat, !- Name", " SPACE3-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -3061,6 +3064,7 @@ TEST_F(EnergyPlusFixture, PTACDrawAirfromReturnNodeAndPlenum_Test) " SPACE4-1 Thermostat, !- Name", " SPACE4-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -3068,6 +3072,7 @@ TEST_F(EnergyPlusFixture, PTACDrawAirfromReturnNodeAndPlenum_Test) " SPACE5-1 Thermostat, !- Name", " SPACE5-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/PoweredInductionUnits.unit.cc b/tst/EnergyPlus/unit/PoweredInductionUnits.unit.cc index 1cee4f0655c..2eb0c8a4de5 100644 --- a/tst/EnergyPlus/unit/PoweredInductionUnits.unit.cc +++ b/tst/EnergyPlus/unit/PoweredInductionUnits.unit.cc @@ -1219,15 +1219,9 @@ TEST_F(EnergyPlusFixture, PIU_InducedAir_Plenums) " Zone1 Thermostat, !- Name", " Zone1, !- Zone or ZoneList Name", " Zone1 Thermostat Schedule, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint {deltaC}", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", - " Thermostat Setpoint Dual Setpoint 2, !- Control 1 Name", - " , !- Control 2 Object Type", - " , !- Control 2 Name", - " , !- Control 3 Object Type", - " , !- Control 3 Name", - " , !- Control 4 Object Type", - " , !- Control 4 Name", - " 0; !- Temperature Difference Between Cutout And Setpoint {deltaC}", + " Thermostat Setpoint Dual Setpoint 2; !- Control 1 Name", "Schedule:Compact,", " Zone1 Thermostat Schedule, !- Name", diff --git a/tst/EnergyPlus/unit/Resources/UnitaryHybridUnitTest_DOSA.idf b/tst/EnergyPlus/unit/Resources/UnitaryHybridUnitTest_DOSA.idf index 2c5da0aa504..04e35cfa505 100644 --- a/tst/EnergyPlus/unit/Resources/UnitaryHybridUnitTest_DOSA.idf +++ b/tst/EnergyPlus/unit/Resources/UnitaryHybridUnitTest_DOSA.idf @@ -15,8 +15,8 @@ ! ! Location: Denver, CO ! -! Design Days: DENVER_STAPLETON_CO_USA Annual Heating 99%, MaxDB=-16�C -! DENVER_STAPLETON_CO_USA Annual Cooling (DB=>MWB) 1%, MaxDB=32.6�C MWB=15.5�C +! Design Days: DENVER_STAPLETON_CO_USA Annual Heating 99%, MaxDB=-16 C +! DENVER_STAPLETON_CO_USA Annual Cooling (DB=>MWB) 1%, MaxDB=32.6 C MWB=15.5 C ! ! Run Period (Weather File): Full Annual Simulation, DENVER_STAPLETON_CO_USA_WMO_724690 ! @@ -83,10 +83,10 @@ ! Data Source=ASHRAE 2009 Annual Design Conditions ! Using Design Conditions from "Climate Design Data 2009 ASHRAE Handbook" ! Denver Centennial CO USA Extreme Annual Wind Speeds, 1%=11.1m/s, 2.5%=9.5m/s, 5%=8.4m/s -! Denver Centennial CO USA Extreme Annual Temperatures, Max Drybulb=-22.9�C Min Drybulb=36.1�C +! Denver Centennial CO USA Extreme Annual Temperatures, Max Drybulb=-22.9 C Min Drybulb=36.1 C ! Denver Centennial CO USA Annual Heating Design Conditions Wind Speed=3m/s Wind Dir=340 ! Coldest Month=December -! Denver Centennial CO USA Annual Heating 99.6%, MaxDB=-18.8�C +! Denver Centennial CO USA Annual Heating 99.6%, MaxDB=-18.8 C SizingPeriod:DesignDay, Denver Centennial Ann Htg 99.6% Condns DB, !- Name @@ -118,7 +118,7 @@ ! Denver Centennial Annual Cooling Design Conditions Wind Speed=4.9m/s Wind Dir=0 ! Hottest Month=July -! Denver Centennial CO USA Annual Cooling (DB=>MWB) 1%, MaxDB=32�C MWB=15.5�C +! Denver Centennial CO USA Annual Cooling (DB=>MWB) 1%, MaxDB=32 C MWB=15.5 C SizingPeriod:DesignDay, Denver Centennial Ann Clg 1% Condns DB=>MWB, !- Name @@ -554,6 +554,7 @@ Main Zone Thermostat, !- Name Main Zone, !- Zone or ZoneList Name Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Dual Setpoint Control; !- Control 1 Name diff --git a/tst/EnergyPlus/unit/SetPointManager.unit.cc b/tst/EnergyPlus/unit/SetPointManager.unit.cc index 484e5332ec9..fa387fbeca7 100644 --- a/tst/EnergyPlus/unit/SetPointManager.unit.cc +++ b/tst/EnergyPlus/unit/SetPointManager.unit.cc @@ -1023,6 +1023,7 @@ TEST_F(EnergyPlusFixture, ColdestSetPointMgrInSingleDuct) " SPACE1-1 Control, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " CoolingSetPoint, !- Control 1 Name", " ThermostatSetpoint:SingleHeating, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/SimAirServingZones.unit.cc b/tst/EnergyPlus/unit/SimAirServingZones.unit.cc index ec0d66da505..4fe76f4b6db 100644 --- a/tst/EnergyPlus/unit/SimAirServingZones.unit.cc +++ b/tst/EnergyPlus/unit/SimAirServingZones.unit.cc @@ -2042,6 +2042,7 @@ TEST_F(EnergyPlusFixture, AirLoop_ReturnFan_MinFlow) " Zone1 Thermostat, !- Name", " Zone1, !- Zone or ZoneList Name", " Zone1 Thermostat Schedule, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Thermostat Setpoint Dual Setpoint 1; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/SingleDuct.unit.cc b/tst/EnergyPlus/unit/SingleDuct.unit.cc index 1600df4505e..7222f4e94ad 100644 --- a/tst/EnergyPlus/unit/SingleDuct.unit.cc +++ b/tst/EnergyPlus/unit/SingleDuct.unit.cc @@ -1093,6 +1093,7 @@ TEST_F(EnergyPlusFixture, SingleDuct_ZeroFloorAreaTest) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -1100,6 +1101,7 @@ TEST_F(EnergyPlusFixture, SingleDuct_ZeroFloorAreaTest) " Space2 Thermostat, !- Name", " Space2, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -2315,6 +2317,7 @@ TEST_F(EnergyPlusFixture, SingleDuct_VAVWaterCoilSizing) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", @@ -2322,6 +2325,7 @@ TEST_F(EnergyPlusFixture, SingleDuct_VAVWaterCoilSizing) " Space2 Thermostat, !- Name", " Space2, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/SizingManager.unit.cc b/tst/EnergyPlus/unit/SizingManager.unit.cc index e574c282ac6..0e93f87a1e7 100644 --- a/tst/EnergyPlus/unit/SizingManager.unit.cc +++ b/tst/EnergyPlus/unit/SizingManager.unit.cc @@ -642,6 +642,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_1x) " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -1113,6 +1114,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_10x) " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -1557,6 +1559,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_NonCoincident1) " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -2055,6 +2058,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_NonCoincident2) " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -2541,6 +2545,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_NonAir_1x_NoLatent " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -3005,6 +3010,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_NonAir_10x_NoLaten " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -3469,6 +3475,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_NonAir_10x_NoLaten " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", @@ -3894,6 +3901,7 @@ TEST_F(EnergyPlusFixture, SizingManager_ZoneSizing_Coincident_NonAir_10x_Latent_ " Zone 1 Thermostat, !- Name", " Zone 1, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Dual Setpoint with SB; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/Standard621SimplifiedProcedure.unit.cc b/tst/EnergyPlus/unit/Standard621SimplifiedProcedure.unit.cc index eabbdf18364..e42e995f484 100644 --- a/tst/EnergyPlus/unit/Standard621SimplifiedProcedure.unit.cc +++ b/tst/EnergyPlus/unit/Standard621SimplifiedProcedure.unit.cc @@ -478,6 +478,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest1) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -485,6 +486,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest1) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1499,6 +1501,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest2) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -1506,6 +1509,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest2) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -2534,6 +2538,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest3) " Space Thermostat, !- Name", " Space, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", @@ -2541,6 +2546,7 @@ TEST_F(EnergyPlusFixture, SimplifiedProcedureTest3) " Spacex10 Thermostat, !- Name", " Spacex10, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Space DualSPSched; !- Control 1 Name", " ", diff --git a/tst/EnergyPlus/unit/StandardRatings.unit.cc b/tst/EnergyPlus/unit/StandardRatings.unit.cc index c473075da5f..59db7daabde 100644 --- a/tst/EnergyPlus/unit/StandardRatings.unit.cc +++ b/tst/EnergyPlus/unit/StandardRatings.unit.cc @@ -2559,6 +2559,7 @@ TEST_F(EnergyPlusFixture, MultiSpeedCoolingCoil_02_Speed_4400W_SEER2_2023_ValueT " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control Object Type", " All Zones Dual SP Control; !- Control Name", @@ -3132,6 +3133,7 @@ TEST_F(EnergyPlusFixture, MultiSpeedCoolingCoil_03_Speed_12000W_SEER2_2023_Value " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control Object Type", " All Zones Dual SP Control; !- Control Name", @@ -4342,6 +4344,7 @@ TEST_F(EnergyPlusFixture, MultiSpeedCoolingCoil_03_Speeds_27717W_IEER_2022_Value " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control Object Type", " All Zones Dual SP Control; !- Control Name", diff --git a/tst/EnergyPlus/unit/SystemAvailabilityManager.unit.cc b/tst/EnergyPlus/unit/SystemAvailabilityManager.unit.cc index bd1b17a19b6..51ce34535a0 100644 --- a/tst/EnergyPlus/unit/SystemAvailabilityManager.unit.cc +++ b/tst/EnergyPlus/unit/SystemAvailabilityManager.unit.cc @@ -173,6 +173,7 @@ TEST_F(EnergyPlusFixture, SysAvailManager_OptimumStart) " LIST_ZONES Thermostat, !- Name", " LIST_ZONES, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Zone DualSPSched; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/UnitHeater.unit.cc b/tst/EnergyPlus/unit/UnitHeater.unit.cc index a2b5394a4a9..d4a12aa4232 100644 --- a/tst/EnergyPlus/unit/UnitHeater.unit.cc +++ b/tst/EnergyPlus/unit/UnitHeater.unit.cc @@ -1014,6 +1014,7 @@ TEST_F(EnergyPlusFixture, UnitHeater_HWHeatingCoilUAAutoSizingTest) " Zone 2 Thermostat, !- Name", " EAST ZONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -1848,6 +1849,7 @@ TEST_F(EnergyPlusFixture, UnitHeater_SecondPriorityZoneEquipment) " Main Zone Thermostat, !- Name", " Main Zone, !- Zone or ZoneList Name", " ZONE CONTROL TYPE SCHED, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", diff --git a/tst/EnergyPlus/unit/UnitarySystem.unit.cc b/tst/EnergyPlus/unit/UnitarySystem.unit.cc index 5955dac9d15..7aeb7fcff60 100644 --- a/tst/EnergyPlus/unit/UnitarySystem.unit.cc +++ b/tst/EnergyPlus/unit/UnitarySystem.unit.cc @@ -1467,6 +1467,7 @@ class NoNegativeCapacityTest : public EnergyPlusFixture "Zone 1 Thermostat, !- Name", "West Zone, !- Zone or ZoneList Name", "Zone Control Type Sched, !- Control Type Schedule Name", + ", !- Temperature Difference Between Cutout And Setpoint", "ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", "Heating Setpoint with SB,!- Control 1 Name", "ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -1476,6 +1477,7 @@ class NoNegativeCapacityTest : public EnergyPlusFixture "Zone 2 Thermostat, !- Name", "EAST ZONE, !- Zone or ZoneList Name", "Zone Control Type Sched, !- Control Type Schedule Name", + ", !- Temperature Difference Between Cutout And Setpoint", "ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", "Heating Setpoint with SB,!- Control 1 Name", "ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -1485,6 +1487,7 @@ class NoNegativeCapacityTest : public EnergyPlusFixture "Zone 3 Thermostat, !- Name", "NORTH ZONE, !- Zone or ZoneList Name", "Zone Control Type Sched, !- Control Type Schedule Name", + ", !- Temperature Difference Between Cutout And Setpoint", "ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", "Heating Setpoint with SB,!- Control 1 Name", "ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -10942,6 +10945,7 @@ ZoneControl:Thermostat, SPACE2-1 Thermostat, !- Name SPACE2-1, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control Object Type All Zones Dual SP Control; !- Control Name @@ -12068,6 +12072,7 @@ Curve:Biquadratic, EAST ZONE Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Zone One DualSPSched; !- Control 1 Name @@ -13955,6 +13960,7 @@ Schedule:Compact, EAST ZONE Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Zone One DualSPSched; !- Control 1 Name @@ -15996,6 +16002,7 @@ Curve:Biquadratic, EAST ZONE Thermostat, !- Name EAST ZONE, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Zone One DualSPSched; !- Control 1 Name @@ -19036,6 +19043,7 @@ Dimensionless; !- Output Unit Type SPACE1-1 Thermostat, !- Name ZONE ONE, !- Zone or ZoneList Name HVACTemplate-Always 4, !- Control Type Schedule Name + , !- Temperature Difference Between Cutout And Setpoint ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type All Zones Dual SP Control; !- Control 1 Name @@ -25247,6 +25255,7 @@ TEST_F(EnergyPlusFixture, UnitarySystemModel_MultiSpeedFanWSHP_Test) " SPACE1-1 Thermostat, !- Name", " SPACE1-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -25254,6 +25263,7 @@ TEST_F(EnergyPlusFixture, UnitarySystemModel_MultiSpeedFanWSHP_Test) " SPACE2-1 Thermostat, !- Name", " SPACE2-1, !- Zone or ZoneList Name", " HVACTemplate-Always 4, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " All Zones Dual SP Control; !- Control 1 Name", @@ -28458,6 +28468,7 @@ TEST_F(EnergyPlusFixture, UnitarySystem_AFN_RTF) " Zone 2 Thermostat, !- Name", " EAST ZONE, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/WindowAC.unit.cc b/tst/EnergyPlus/unit/WindowAC.unit.cc index d087fcc9c26..70844895c41 100644 --- a/tst/EnergyPlus/unit/WindowAC.unit.cc +++ b/tst/EnergyPlus/unit/WindowAC.unit.cc @@ -285,6 +285,7 @@ TEST_F(EnergyPlusFixture, WindowAC_VStest1) " Zone 1 Thermostat, !- Name", " West Zone, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", @@ -760,6 +761,7 @@ TEST_F(EnergyPlusFixture, WindowAC_DesignSpecificationZoneHVACSizing) " Zone 1 Thermostat, !- Name", " West Zone, !- Zone or ZoneList Name", " Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Setpoint with SB,!- Control 1 Name", " ThermostatSetpoint:SingleCooling, !- Control 2 Object Type", diff --git a/tst/EnergyPlus/unit/ZoneTempPredictorCorrector.unit.cc b/tst/EnergyPlus/unit/ZoneTempPredictorCorrector.unit.cc index dbac610447a..4907e1876f4 100644 --- a/tst/EnergyPlus/unit/ZoneTempPredictorCorrector.unit.cc +++ b/tst/EnergyPlus/unit/ZoneTempPredictorCorrector.unit.cc @@ -297,6 +297,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_ReportingTest) " Core_top Thermostat, !- Name", " Core_top, !- Zone or ZoneList Name", " Single Heating Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Core_top HeatSPSched; !- Control 1 Name", " ", @@ -371,6 +372,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_ReportingTest) " Core_middle Thermostat, !- Name", " Core_middle, !- Zone or ZoneList Name", " Single Cooling Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " Core_middle CoolSPSched; !- Control 1 Name", " ", @@ -411,6 +413,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_ReportingTest) " Core_basement Thermostat, !- Name", " Core_basement, !- Zone or ZoneList Name", " Single Cooling Heating Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type", " Core_basement CoolHeatSPSched; !- Control 1 Name", " ", @@ -444,6 +447,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_ReportingTest) " Core_bottom Thermostat, !- Name", " Core_bottom, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_bottom DualSPSched; !- Control 1 Name", " ", @@ -729,6 +733,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_AdaptiveThermostat) " Core_top Thermostat, !- Name", " Core_top, !- Zone or ZoneList Name", " Single Cooling Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " Core_top CoolSPSched; !- Control 1 Name", " ", @@ -743,6 +748,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_AdaptiveThermostat) " Core_middle Thermostat, !- Name", " Core_middle, !- Zone or ZoneList Name", " Single Cooling Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " Core_middle CoolSPSched; !- Control 1 Name", " ", @@ -757,6 +763,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_AdaptiveThermostat) " Core_basement Thermostat, !- Name", " Core_basement, !- Zone or ZoneList Name", " Single Cooling Heating Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeatingOrCooling, !- Control 1 Object Type", " Core_basement CoolHeatSPSched; !- Control 1 Name", " ", @@ -771,6 +778,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_AdaptiveThermostat) " Core_bottom Thermostat, !- Name", " Core_bottom, !- Zone or ZoneList Name", " Dual Zone Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type", " Core_bottom DualSPSched; !- Control 1 Name", " ", @@ -1182,6 +1190,7 @@ TEST_F(EnergyPlusFixture, ZoneTempPredictorCorrector_WrongControlTypeSchedule) " Zone1 Thermostat, !- Name", " Zone1, !- Zone or ZoneList Name", " Single HEATING Control Type Sched, !- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleCooling, !- Control 1 Object Type", " Thermostat Setpoint Single Cooling; !- Control 1 Name", @@ -2087,6 +2096,7 @@ TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_Test) " TheZone Thermostat,", " TheZone,", " ZONE CONTROL TYPE SCHED," + " ,", " ThermostatSetpoint:SingleHeating,", " SingleHeatingSetpoints,", " ThermostatSetpoint:SingleCooling,", @@ -2100,6 +2110,7 @@ TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_Test) " AnotherZone Thermostat,", " AnotherZone,", " ZONE CONTROL TYPE SCHED,", + " ,", " ThermostatSetpoint:SingleHeating,", " ThisIsInvalid;" // This is an error because this ThermostatSetpoint:SingleHeating object does NOT exist (cause of defect) " ", @@ -2136,6 +2147,57 @@ TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_Test) true)); } +TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_CutoutDifferentialIgnoredForSingleHeatingOrCooling) +{ + std::string const idf_objects = delimited_string({ + "ScheduleTypeLimits,", + " Control Type,", + " 0,", + " 4,", + " Discrete;", + "", + "Schedule:Constant,", + " Zone Control Type Schedule,", + " Control Type,", + " 3;", + "", + "Schedule:Constant,", + " Setpoint Schedule,", + " ,", + " 22.0;", + "", + "ThermostatSetpoint:SingleHeatingOrCooling,", + " Combined Setpoint,", + " Setpoint Schedule;", + "", + "ZoneControl:Thermostat,", + " Zone Thermostat,", + " Zone,", + " Zone Control Type Schedule,", + " 1.0,", + " ThermostatSetpoint:SingleHeatingOrCooling,", + " Combined Setpoint;", + "", + "Zone,", + " Zone,", + " 0, 0, 0, 0,", + " 1,", + " 1;", + }); + + ASSERT_TRUE(process_idf(idf_objects)); + state->init_state(*state); + + bool errorsFound = false; + GetZoneData(*state, errorsFound); + ASSERT_FALSE(errorsFound); + + GetZoneAirSetPoints(*state); + + EXPECT_TRUE(compare_err_stream_substring( + "Temperature Difference Between Cutout And Setpoint will not be applied to ThermostatSetpoint:SingleHeatingOrCooling.", true)); +} + TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_ITEApproachTempWarning) { // issue 10594: Zone cooling setpoint is bypassed when an ITE object uses FlowControlWithApproachTemperatures. Verify the user is warned. @@ -2179,6 +2241,7 @@ TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_ITEApproachTempWarning) " East Zone Thermostat,", " East Zone,", " ZONE CONTROL TYPE SCHED,", + " ,", " ThermostatSetpoint:DualSetpoint,", " DualSetpoints;", " ", @@ -2250,6 +2313,7 @@ TEST_F(EnergyPlusFixture, GetZoneAirSetPoints_ITEApproachTempNoWarningForInactiv " East Zone Thermostat, !- Name", " East Zone, !- Zone or ZoneList or Space or SpaceList Name", " Zone Control Type Sched,!- Control Type Schedule Name", + " , !- Temperature Difference Between Cutout And Setpoint", " ThermostatSetpoint:SingleHeating, !- Control 1 Object Type", " Heating Only Setpoint, !- Control 1 Name", " ThermostatSetpoint:DualSetpoint, !- Control 2 Object Type",