diff --git a/DarkMode/assets/expatternprovider/lang/en_us.json b/DarkMode/assets/expatternprovider/lang/en_us.json
index 2fd25713..a07cdcb7 100644
--- a/DarkMode/assets/expatternprovider/lang/en_us.json
+++ b/DarkMode/assets/expatternprovider/lang/en_us.json
@@ -5,7 +5,7 @@
   "block.expatternprovider.assembler_matrix_pattern": "Assembler Matrix Pattern Core",
   "block.expatternprovider.assembler_matrix_speed": "Assembler Matrix Speed Core",
   "block.expatternprovider.assembler_matrix_wall": "Assembler Matrix Wall",
-  "block.expatternprovider.caner": "ME Caner",
+  "block.expatternprovider.caner": "ME Canner",
   "block.expatternprovider.circuit_cutter": "Circuit Slicer",
   "block.expatternprovider.crystal_assembler": "Crystal Assembler",
   "block.expatternprovider.crystal_fixer": "Crystal Fixer",
@@ -29,19 +29,21 @@
   "block.expatternprovider.fishbig": "Fishbig",
   "block.expatternprovider.ingredient_buffer": "ME Ingredient Buffer",
   "block.expatternprovider.machine_frame": "Extended Machine Frame",
+  "block.expatternprovider.mddyue": "MDDyue",
   "block.expatternprovider.oversize_interface": "ME Oversize Interface",
   "block.expatternprovider.silicon_block": "Block of Silicon",
   "block.expatternprovider.wireless_connect": "ME Wireless Connector",
   "block.expatternprovider.wireless_hub": "ME Wireless Hub",
+  "chat.config_modifier.success": "Successfully modified %s's config",
   "chat.ex_pattern_access_terminal.pos": "The pattern provider is now highlighted at: %s, Dim: %s (%s blocks away)",
   "chat.pattern_view.error": "This pattern isn't supported by ExtendedAE, please report it to Github: %s",
   "chat.wireless.highlight": "The wireless connector is now highlighted at: %s, Dim: %s (%s blocks away)",
   "chat.wireless_bind": "Bound to X: %s, Y: %s, Z: %s",
   "chat.wireless_connect": "Connected to X: %s, Y: %s, Z: %s",
   "chat.wireless_connect.clear": "The setting is cleared",
-  "chat.wireless_connect.cross_dimension": "The Wireless Connectors must in the same dimension",
-  "chat.wireless_connect.missing": "The Wireless Connector is missing",
-  "chat.wireless_connect.out_of_port": "The Wireless Hub has no available ports",
+  "chat.wireless_connect.cross_dimension": "The Wireless Node must in the same dimension",
+  "chat.wireless_connect.missing": "The Wireless Node is missing",
+  "chat.wireless_connect.out_of_port": "The Wireless Hub has no available port",
   "chat.wireless_connect.out_of_range": "The Wireless Node is too far",
   "chat.wireless_connect.self_reference": "Can't connect to itself",
   "config.jade.plugin_expatternprovider.jade_chamber": "ME Crystal Fixer",
@@ -62,10 +64,21 @@
   "gui.expatternprovider.assembler_matrix.pattern": "Only accepts crafting pattern",
   "gui.expatternprovider.assembler_matrix.threads": "Running Jobs: %s",
   "gui.expatternprovider.assembler_matrix.tooltip": "Search pattern",
-  "gui.expatternprovider.caner": "ME Caner",
+  "gui.expatternprovider.caner": "ME Canner",
   "gui.expatternprovider.caner.empty": "Empty Mode",
   "gui.expatternprovider.caner.fill": "Fill Mode",
   "gui.expatternprovider.circuit_cutter": "Circuit Slicer",
+  "gui.expatternprovider.config_modifier": "Config Modifier",
+  "gui.expatternprovider.config_modifier.change_mode": "Change Mode",
+  "gui.expatternprovider.config_modifier.data_input": "Input number here",
+  "gui.expatternprovider.config_modifier.mode.add": "Add",
+  "gui.expatternprovider.config_modifier.mode.div": "Divide",
+  "gui.expatternprovider.config_modifier.mode.max": "Maximize",
+  "gui.expatternprovider.config_modifier.mode.min": "Minimize",
+  "gui.expatternprovider.config_modifier.mode.mul": "Multiply",
+  "gui.expatternprovider.config_modifier.mode.rmv": "Clear",
+  "gui.expatternprovider.config_modifier.mode.set": "Set",
+  "gui.expatternprovider.config_modifier.mode.sub": "Subtract",
   "gui.expatternprovider.crystal_assembler": "Crystal Assembler",
   "gui.expatternprovider.crystal_assembler.amount": "%s mb / %s mb",
   "gui.expatternprovider.crystal_assembler.tank_empty": "Empty",
@@ -146,14 +159,17 @@
   "gui.expatternprovider.set_output_sides.off": "Disabled",
   "gui.expatternprovider.set_output_sides.on": "Enabled",
   "gui.expatternprovider.set_output_sides.open": "Open Output Config",
+  "gui.expatternprovider.smart_annihilation_plane": "ME Smart Annihilation Plane",
   "gui.expatternprovider.tag_export_bus": "ME Tag Export Bus",
   "gui.expatternprovider.tag_storage_bus": "Tag Storage bus",
   "gui.expatternprovider.tag_storage_bus.blacklist": "Blacklist Filter",
+  "gui.expatternprovider.tag_storage_bus.blacklist.tooltip": "Input blacklist tags here",
   "gui.expatternprovider.tag_storage_bus.desc.01": "& = AND    | = OR",
   "gui.expatternprovider.tag_storage_bus.desc.02": "^ = XOR",
   "gui.expatternprovider.tag_storage_bus.desc.03": "() for priority    * for wildcard",
   "gui.expatternprovider.tag_storage_bus.tooltip": "Input tag here",
   "gui.expatternprovider.tag_storage_bus.whitelist": "Whitelist Filter",
+  "gui.expatternprovider.tag_storage_bus.whitelist.tooltip": "Input whitelist tags here",
   "gui.expatternprovider.tank_amount": "%s mb / %s mb",
   "gui.expatternprovider.tank_empty": "Empty",
   "gui.expatternprovider.threshold_export_bus": "ME Threshold Export Bus",
@@ -174,6 +190,7 @@
   "gui.wireless_connect.highlight.tooltip": "Highlight the remote Wireless Connector in world.",
   "gui.wireless_connect.power": "Power Usage: %s AE/t",
   "gui.wireless_connect.remote": "Position X: %s, Y: %s, Z: %s",
+  "gui.wireless_connect.remote_channel": "Position X: %s, Y: %s, Z: %s\nUsed Channel: %s",
   "gui.wireless_connect.status": "Status: %s",
   "gui.wireless_connect.status.no_power": "No Power",
   "gui.wireless_connect.status.no_power.desc": "This Wireless Connector needs more power.",
@@ -190,6 +207,7 @@
   "item.expatternprovider.concurrent_processor": "Concurrent Processor",
   "item.expatternprovider.concurrent_processor_press": "Inscriber Concurrent Press",
   "item.expatternprovider.concurrent_processor_print": "Printed Concurrent Circuit",
+  "item.expatternprovider.config_modifier": "Config Modifier",
   "item.expatternprovider.drive_upgrade": "Drive Upgrade",
   "item.expatternprovider.emc_interface_upgrade": "Transmutation Interface Upgrade",
   "item.expatternprovider.emc_io_bus_upgrade": "Transmutation Import/Export Bus Upgrade",
@@ -222,11 +240,14 @@
   "item.expatternprovider.precise_export_bus": "ME Precise Export Bus",
   "item.expatternprovider.precise_storage_bus": "ME Precise Storage Bus",
   "item.expatternprovider.quartz_blend": "Quartz Blend",
+  "item.expatternprovider.smart_annihilation_plane": "ME Smart Annihilation Plane",
   "item.expatternprovider.tag_export_bus": "ME Tag Export Bus",
   "item.expatternprovider.tag_storage_bus": "ME Tag Storage Bus",
   "item.expatternprovider.threshold_export_bus": "ME Threshold Export Bus",
   "item.expatternprovider.threshold_level_emitter": "ME Threshold Level Emitter",
   "item.expatternprovider.void_cell": "ME Void Cell",
+  "item.expatternprovider.wireless_advanced_tool": "ME Wireless Advanced Setup Kit",
+  "item.expatternprovider.wireless_connector_upgrade": "Wireless Connector Upgrade",
   "item.expatternprovider.wireless_ex_pat": "Wireless Extended Pattern Access Terminal",
   "item.expatternprovider.wireless_tool": "ME Wireless Setup Kit",
   "itemGroup.epp": "Extended AE2",
@@ -237,12 +258,22 @@
   "key.epp.category": "Extended AE",
   "key.epp.viewpattern": "View Pattern",
   "key.expatternprovider.category": "Extended AE",
+  "key.expatternprovider.set_amount": "Set Amount",
   "key.expatternprovider.viewpattern": "View Pattern",
   "packaged_device.error.tooltip": "Invalid",
   "packaged_device.tooltip": "Device: %s",
   "pattern.tooltip": "Press [%s] to view pattern",
+  "tag_display.tooltip.fluids": "Contained fluid tags:",
+  "tag_display.tooltip.hint": "Hold shift to view its tags",
+  "tag_display.tooltip.items": "Item tags:",
+  "tag_display.tooltip.no_tags": "It has no tags",
   "void_warn.tooltip": "Need partitioning before using",
   "wireless.tooltip": "Bound to Connector at X: %s, Y: %s, Z: %s",
   "wireless.use.tooltip.01": "Click to bind",
-  "wireless.use.tooltip.02": "Click on another one to connect"
+  "wireless.use.tooltip.02": "Click on another one to connect",
+  "wireless_advanced.mode": "Current Mode: %s",
+  "wireless_advanced.mode.add": "§bAdd",
+  "wireless_advanced.mode.swapped": "Swapped Mode to: %s",
+  "wireless_advanced.mode.use": "§dUse",
+  "wireless_advanced.port_list": "Stored Connections (%s/%s):"
 }
\ No newline at end of file
diff --git a/DarkMode/assets/expatternprovider/lang/zh_cn.json b/DarkMode/assets/expatternprovider/lang/zh_cn.json
index 853e4495..71fbee9c 100644
--- a/DarkMode/assets/expatternprovider/lang/zh_cn.json
+++ b/DarkMode/assets/expatternprovider/lang/zh_cn.json
@@ -20,7 +20,7 @@
   "block.expatternprovider.entro_cluster_small": "小型恩特罗芽",
   "block.expatternprovider.ex_charger": "扩展充能器",
   "block.expatternprovider.ex_drive": "ME扩展驱动器",
-  "block.expatternprovider.ex_emc_interface": "ME扩展转化接口",
+  "block.expatternprovider.ex_emc_interface": "ME扩展嬗变接口",
   "block.expatternprovider.ex_inscriber": "扩展压印器",
   "block.expatternprovider.ex_interface": "ME扩展接口",
   "block.expatternprovider.ex_io_port": "ME扩展IO端口",
@@ -33,28 +33,29 @@
   "block.expatternprovider.oversize_interface": "ME超大接口",
   "block.expatternprovider.silicon_block": "硅块",
   "block.expatternprovider.wireless_connect": "ME无线连接器",
-  "block.expatternprovider.wireless_hub": "ME无线连接集线器",
-  "chat.ex_pattern_access_terminal.pos": "样板供应器现在突出显示在：%s，维度：%s",
+  "block.expatternprovider.wireless_hub": "ME无线集线器",
+  "chat.config_modifier.success": "成功修改%s的配置",
+  "chat.ex_pattern_access_terminal.pos": "样板供应器现在突出显示在：%s，维度：%s（%s个方块外）",
   "chat.pattern_view.error": "扩展AE不支持此样板，请在Github提交：%s",
-  "chat.wireless.highlight": "无线连接器现在突出显示在：%s，维度：%s",
+  "chat.wireless.highlight": "无线连接器现在突出显示在：%s，维度：%s (%s个方块外)",
   "chat.wireless_bind": "绑定到 X：%s，Y：%s，Z：%s",
   "chat.wireless_connect": "连接到 X：%s，Y：%s，Z：%s",
   "chat.wireless_connect.clear": "设置已清除",
   "chat.wireless_connect.cross_dimension": "必须处于同一维度",
   "chat.wireless_connect.missing": "目标已丢失",
-  "chat.wireless_connect.out_of_port": "无线集线器无可用端口",
+  "chat.wireless_connect.out_of_port": "该无线集线器没有可用端口",
   "chat.wireless_connect.out_of_range": "距离过远",
   "chat.wireless_connect.self_reference": "无法连接到自身",
   "config.jade.plugin_expatternprovider.jade_chamber": "ME水晶修复器",
-  "config.jade.plugin_expatternprovider.jade_wireless": "ME无线连接器 颜色",
+  "config.jade.plugin_expatternprovider.jade_wireless": "ME无线连接器颜色",
   "cutter.tooltip": "右击AE设备以重命名",
   "emi.expatternprovider.category.assembler": "水晶装配器",
   "emi.expatternprovider.category.cutter": "电路切片器",
   "emi.expatternprovider.category.fixer": "水晶修复器",
   "emi.expatternprovider.desc.entro_crystal": "恩特罗水晶由萌芽的恩特罗化福鲁伊克斯生长，就像赛特斯水晶的工作原理一样。要获得萌芽的恩特罗化福鲁伊克斯，您需要制作恩特罗种子并在福鲁伊克斯块上使用它。",
   "emi.expatternprovider.desc.entro_seed": "在放置于世界中的福鲁伊克斯块上使用恩特罗种子，会将该福鲁伊克斯块变成萌芽的恩特罗化福鲁伊克斯。",
-  "emi.expatternprovider.text.success_chance": "成功机会：%s",
-  "group.ex_emc_io_bus_part": "ME扩展转化输入/输出总线",
+  "emi.expatternprovider.text.success_chance": "成功率：%s",
+  "group.ex_emc_io_bus_part": "ME扩展嬗变输入/输出总线",
   "group.ex_io_bus_part": "ME扩展输入/输出总线",
   "gui.expatternprovider.active_formation_plane": "ME主动成型面板",
   "gui.expatternprovider.anvil.not_enough_xp": "经验不足",
@@ -67,32 +68,43 @@
   "gui.expatternprovider.caner.empty": "排空模式",
   "gui.expatternprovider.caner.fill": "填充模式",
   "gui.expatternprovider.circuit_cutter": "电路切片器",
+  "gui.expatternprovider.config_modifier": "配置修改器",
+  "gui.expatternprovider.config_modifier.change_mode": "更改模式",
+  "gui.expatternprovider.config_modifier.data_input": "在此输入数字",
+  "gui.expatternprovider.config_modifier.mode.add": "加",
+  "gui.expatternprovider.config_modifier.mode.div": "除",
+  "gui.expatternprovider.config_modifier.mode.max": "设为最大",
+  "gui.expatternprovider.config_modifier.mode.min": "设为最小",
+  "gui.expatternprovider.config_modifier.mode.mul": "乘",
+  "gui.expatternprovider.config_modifier.mode.rmv": "清除",
+  "gui.expatternprovider.config_modifier.mode.set": "设置",
+  "gui.expatternprovider.config_modifier.mode.sub": "减",
   "gui.expatternprovider.crystal_assembler": "水晶装配器",
   "gui.expatternprovider.crystal_assembler.amount": "%s mB / %s mB",
   "gui.expatternprovider.crystal_assembler.tank_empty": "空",
   "gui.expatternprovider.ex_crafting_terminal": "扩展合成终端",
   "gui.expatternprovider.ex_drive": "ME扩展驱动器",
-  "gui.expatternprovider.ex_emc_export_bus_part": "ME扩展转化输出总线",
-  "gui.expatternprovider.ex_emc_import_bus_part": "ME扩展转化输入总线",
-  "gui.expatternprovider.ex_emc_interface": "ME扩展转化接口",
+  "gui.expatternprovider.ex_emc_export_bus_part": "ME扩展嬗变输出总线",
+  "gui.expatternprovider.ex_emc_import_bus_part": "ME扩展嬗变输入总线",
+  "gui.expatternprovider.ex_emc_interface": "ME扩展嬗变接口",
   "gui.expatternprovider.ex_export_bus_part": "ME扩展输出总线",
   "gui.expatternprovider.ex_import_bus_part": "ME扩展输入总线",
   "gui.expatternprovider.ex_inscriber": "扩展压印器",
-  "gui.expatternprovider.ex_inscriber.fourstackable": "数量限制 4",
-  "gui.expatternprovider.ex_inscriber.next": "下一个压印工作",
-  "gui.expatternprovider.ex_inscriber.number": "压印工作 %s",
-  "gui.expatternprovider.ex_inscriber.pre": "上一个压印工作",
-  "gui.expatternprovider.ex_inscriber.stackable": "数量限制 64",
-  "gui.expatternprovider.ex_inscriber.unstackable": "数量限制 1",
+  "gui.expatternprovider.ex_inscriber.fourstackable": "堆叠4个物品",
+  "gui.expatternprovider.ex_inscriber.next": "下一个压印任务",
+  "gui.expatternprovider.ex_inscriber.number": "压印任务%s",
+  "gui.expatternprovider.ex_inscriber.pre": "上一个压印任务",
+  "gui.expatternprovider.ex_inscriber.stackable": "堆叠64个物品",
+  "gui.expatternprovider.ex_inscriber.unstackable": "堆叠1个物品",
   "gui.expatternprovider.ex_interface": "ME扩展接口",
   "gui.expatternprovider.ex_interface.config": "配置界面 %s",
   "gui.expatternprovider.ex_interface.next": "下一页",
   "gui.expatternprovider.ex_interface.pre": "上一页",
   "gui.expatternprovider.ex_io_port": "ME扩展IO端口",
   "gui.expatternprovider.ex_molecular_assembler": "扩展分子装配室",
-  "gui.expatternprovider.ex_molecular_assembler.next": "下一个合成工作",
-  "gui.expatternprovider.ex_molecular_assembler.number": "合成工作 %s",
-  "gui.expatternprovider.ex_molecular_assembler.pre": "上一个合成工作",
+  "gui.expatternprovider.ex_molecular_assembler.next": "下一个合成任务",
+  "gui.expatternprovider.ex_molecular_assembler.number": "合成任务%s",
+  "gui.expatternprovider.ex_molecular_assembler.pre": "上一个合成任务",
   "gui.expatternprovider.ex_pattern_access_terminal": "ME扩展样板管理终端",
   "gui.expatternprovider.ex_pattern_access_terminal.search_mode": "更改搜索模式",
   "gui.expatternprovider.ex_pattern_access_terminal.search_mode.01": "当前：输出",
@@ -119,10 +131,10 @@
   "gui.expatternprovider.pattern_modifier.clear.desc": "清除所有样板内容，将其变成空白样板",
   "gui.expatternprovider.pattern_modifier.clone": "复制模式",
   "gui.expatternprovider.pattern_modifier.clone.desc": "复制目标样板",
-  "gui.expatternprovider.pattern_modifier.disable": "关闭",
-  "gui.expatternprovider.pattern_modifier.div.desc": "将输入和输出量除以 %s",
-  "gui.expatternprovider.pattern_modifier.enable": "开启",
-  "gui.expatternprovider.pattern_modifier.multi.desc": "将输入和输出量乘以 %s",
+  "gui.expatternprovider.pattern_modifier.disable": "禁用",
+  "gui.expatternprovider.pattern_modifier.div.desc": "将输入和输出量除以%s",
+  "gui.expatternprovider.pattern_modifier.enable": "启用",
+  "gui.expatternprovider.pattern_modifier.multi.desc": "将输入和输出量乘以%s",
   "gui.expatternprovider.pattern_modifier.multiply": "乘数模式",
   "gui.expatternprovider.pattern_modifier.pattern_mode": "属性模式",
   "gui.expatternprovider.pattern_modifier.pattern_mode.fluid_substitute": "流体替换模式",
@@ -147,14 +159,17 @@
   "gui.expatternprovider.set_output_sides.off": "已禁用",
   "gui.expatternprovider.set_output_sides.on": "已启用",
   "gui.expatternprovider.set_output_sides.open": "打开输出配置",
+  "gui.expatternprovider.smart_annihilation_plane": "ME智能破坏面板",
   "gui.expatternprovider.tag_export_bus": "ME标签输出总线",
   "gui.expatternprovider.tag_storage_bus": "ME标签存储总线",
   "gui.expatternprovider.tag_storage_bus.blacklist": "黑名单过滤器",
+  "gui.expatternprovider.tag_storage_bus.blacklist.tooltip": "在此处输入黑名单标签",
   "gui.expatternprovider.tag_storage_bus.desc.01": "& = 逻辑与    | = 逻辑或",
   "gui.expatternprovider.tag_storage_bus.desc.02": "^ = 逻辑异或",
   "gui.expatternprovider.tag_storage_bus.desc.03": "() 表示优先  * 表示通配符",
   "gui.expatternprovider.tag_storage_bus.tooltip": "在此输入标签",
   "gui.expatternprovider.tag_storage_bus.whitelist": "白名单过滤器",
+  "gui.expatternprovider.tag_storage_bus.whitelist.tooltip": "在此处输入白名单标签",
   "gui.expatternprovider.tank_amount": "%s 毫桶 / %s 毫桶",
   "gui.expatternprovider.tank_empty": "空（储罐状态）",
   "gui.expatternprovider.threshold_export_bus": "ME阈值输出总线",
@@ -168,13 +183,14 @@
   "gui.expatternprovider.void_cell.mode.1": "模式：物质球",
   "gui.expatternprovider.void_cell.mode.2": "模式：奇点",
   "gui.expatternprovider.wireless_connect": "ME无线连接器",
-  "gui.expatternprovider.wireless_hub": "ME无线连接中枢",
+  "gui.expatternprovider.wireless_hub": "ME无线集线器",
   "gui.pattern_view.craft.fluid_substitute": "流体替换：%s",
   "gui.pattern_view.craft.substitute": "替换：%s",
   "gui.wireless_connect.channel": "频道：%s/%s",
   "gui.wireless_connect.highlight.tooltip": "在世界上突出显示无线连接器。",
-  "gui.wireless_connect.power": "能量使用：%s AE/t",
+  "gui.wireless_connect.power": "能耗：%s AE/t",
   "gui.wireless_connect.remote": "位置 X：%s，Y：%s，Z：%s",
+  "gui.wireless_connect.remote_channel": "位置 X：%s, Y：%s, Z：%s\n使用的频道：%s",
   "gui.wireless_connect.status": "状态：%s",
   "gui.wireless_connect.status.no_power": "无能量",
   "gui.wireless_connect.status.no_power.desc": "无线连接器需要更多的能量。",
@@ -191,18 +207,19 @@
   "item.expatternprovider.concurrent_processor": "并发处理器",
   "item.expatternprovider.concurrent_processor_press": "并发压印模板",
   "item.expatternprovider.concurrent_processor_print": "并发电路板",
+  "item.expatternprovider.config_modifier": "配置修改器",
   "item.expatternprovider.drive_upgrade": "驱动器升级",
-  "item.expatternprovider.emc_interface_upgrade": "转化接口升级",
-  "item.expatternprovider.emc_io_bus_upgrade": "转化输入/输出总线升级",
+  "item.expatternprovider.emc_interface_upgrade": "嬗变接口升级",
+  "item.expatternprovider.emc_io_bus_upgrade": "嬗变输入/输出总线升级",
   "item.expatternprovider.entro_crystal": "恩特罗水晶",
   "item.expatternprovider.entro_dust": "恩特罗粉",
   "item.expatternprovider.entro_ingot": "恩特罗注入锭",
   "item.expatternprovider.entro_seed": "恩特罗种子",
   "item.expatternprovider.entro_shard": "恩特罗碎片",
   "item.expatternprovider.ex_crafting_terminal": "ME扩展合成终端",
-  "item.expatternprovider.ex_emc_export_bus_part": "ME扩展转化输出总线",
-  "item.expatternprovider.ex_emc_import_bus_part": "ME扩展转化输入总线",
-  "item.expatternprovider.ex_emc_interface_part": "ME扩展转化接口",
+  "item.expatternprovider.ex_emc_export_bus_part": "ME扩展嬗变输出总线",
+  "item.expatternprovider.ex_emc_import_bus_part": "ME扩展嬗变输入总线",
+  "item.expatternprovider.ex_emc_interface_part": "ME扩展嬗变接口",
   "item.expatternprovider.ex_export_bus_part": "ME扩展输出总线",
   "item.expatternprovider.ex_import_bus_part": "ME扩展输入总线",
   "item.expatternprovider.ex_interface_part": "ME扩展接口",
@@ -223,11 +240,14 @@
   "item.expatternprovider.precise_export_bus": "ME精确输出总线",
   "item.expatternprovider.precise_storage_bus": "ME精确存储总线",
   "item.expatternprovider.quartz_blend": "石英混合物",
+  "item.expatternprovider.smart_annihilation_plane": "ME智能破坏面板",
   "item.expatternprovider.tag_export_bus": "ME标签输出总线",
   "item.expatternprovider.tag_storage_bus": "ME标签存储总线",
   "item.expatternprovider.threshold_export_bus": "ME阈值输出总线",
   "item.expatternprovider.threshold_level_emitter": "ME阈值发信器",
   "item.expatternprovider.void_cell": "ME虚空元件",
+  "item.expatternprovider.wireless_advanced_tool": "ME无线高级设置工具",
+  "item.expatternprovider.wireless_connector_upgrade": "无线连接器升级",
   "item.expatternprovider.wireless_ex_pat": "无线扩展样板管理终端",
   "item.expatternprovider.wireless_tool": "ME无线连接工具",
   "itemGroup.epp": "AE2扩展",
@@ -238,12 +258,22 @@
   "key.epp.category": "AE2扩展",
   "key.epp.viewpattern": "查看样板配置",
   "key.expatternprovider.category": "AE2扩展",
+  "key.expatternprovider.set_amount": "设置数量",
   "key.expatternprovider.viewpattern": "查看样板配置",
   "packaged_device.error.tooltip": "无效",
   "packaged_device.tooltip": "设备：%s",
   "pattern.tooltip": "按下[%s]查看样板",
+  "tag_display.tooltip.fluids": "所含流体标签：",
+  "tag_display.tooltip.hint": "按住Shift以查看标签",
+  "tag_display.tooltip.items": "物品标签：",
+  "tag_display.tooltip.no_tags": "无标签",
   "void_warn.tooltip": "使用前需要分区",
   "wireless.tooltip": "绑定到 X：%s、Y：%s、Z：%s 处的连接器",
   "wireless.use.tooltip.01": "右键绑定",
-  "wireless.use.tooltip.02": "右键另一个进行连接"
-}
+  "wireless.use.tooltip.02": "右键另一个进行连接",
+  "wireless_advanced.mode": "当前模式：%s",
+  "wireless_advanced.mode.add": "§b添加",
+  "wireless_advanced.mode.swapped": "已切换模式至：%s",
+  "wireless_advanced.mode.use": "§d使用",
+  "wireless_advanced.port_list": "已存储的连接 (%s/%s):"
+}
\ No newline at end of file
diff --git a/DarkMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png b/DarkMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png
new file mode 100644
index 00000000..f6eda67c
Binary files /dev/null and b/DarkMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png differ
diff --git a/LightMode/assets/expatternprovider/lang/en_us.json b/LightMode/assets/expatternprovider/lang/en_us.json
index 2fd25713..a07cdcb7 100644
--- a/LightMode/assets/expatternprovider/lang/en_us.json
+++ b/LightMode/assets/expatternprovider/lang/en_us.json
@@ -5,7 +5,7 @@
   "block.expatternprovider.assembler_matrix_pattern": "Assembler Matrix Pattern Core",
   "block.expatternprovider.assembler_matrix_speed": "Assembler Matrix Speed Core",
   "block.expatternprovider.assembler_matrix_wall": "Assembler Matrix Wall",
-  "block.expatternprovider.caner": "ME Caner",
+  "block.expatternprovider.caner": "ME Canner",
   "block.expatternprovider.circuit_cutter": "Circuit Slicer",
   "block.expatternprovider.crystal_assembler": "Crystal Assembler",
   "block.expatternprovider.crystal_fixer": "Crystal Fixer",
@@ -29,19 +29,21 @@
   "block.expatternprovider.fishbig": "Fishbig",
   "block.expatternprovider.ingredient_buffer": "ME Ingredient Buffer",
   "block.expatternprovider.machine_frame": "Extended Machine Frame",
+  "block.expatternprovider.mddyue": "MDDyue",
   "block.expatternprovider.oversize_interface": "ME Oversize Interface",
   "block.expatternprovider.silicon_block": "Block of Silicon",
   "block.expatternprovider.wireless_connect": "ME Wireless Connector",
   "block.expatternprovider.wireless_hub": "ME Wireless Hub",
+  "chat.config_modifier.success": "Successfully modified %s's config",
   "chat.ex_pattern_access_terminal.pos": "The pattern provider is now highlighted at: %s, Dim: %s (%s blocks away)",
   "chat.pattern_view.error": "This pattern isn't supported by ExtendedAE, please report it to Github: %s",
   "chat.wireless.highlight": "The wireless connector is now highlighted at: %s, Dim: %s (%s blocks away)",
   "chat.wireless_bind": "Bound to X: %s, Y: %s, Z: %s",
   "chat.wireless_connect": "Connected to X: %s, Y: %s, Z: %s",
   "chat.wireless_connect.clear": "The setting is cleared",
-  "chat.wireless_connect.cross_dimension": "The Wireless Connectors must in the same dimension",
-  "chat.wireless_connect.missing": "The Wireless Connector is missing",
-  "chat.wireless_connect.out_of_port": "The Wireless Hub has no available ports",
+  "chat.wireless_connect.cross_dimension": "The Wireless Node must in the same dimension",
+  "chat.wireless_connect.missing": "The Wireless Node is missing",
+  "chat.wireless_connect.out_of_port": "The Wireless Hub has no available port",
   "chat.wireless_connect.out_of_range": "The Wireless Node is too far",
   "chat.wireless_connect.self_reference": "Can't connect to itself",
   "config.jade.plugin_expatternprovider.jade_chamber": "ME Crystal Fixer",
@@ -62,10 +64,21 @@
   "gui.expatternprovider.assembler_matrix.pattern": "Only accepts crafting pattern",
   "gui.expatternprovider.assembler_matrix.threads": "Running Jobs: %s",
   "gui.expatternprovider.assembler_matrix.tooltip": "Search pattern",
-  "gui.expatternprovider.caner": "ME Caner",
+  "gui.expatternprovider.caner": "ME Canner",
   "gui.expatternprovider.caner.empty": "Empty Mode",
   "gui.expatternprovider.caner.fill": "Fill Mode",
   "gui.expatternprovider.circuit_cutter": "Circuit Slicer",
+  "gui.expatternprovider.config_modifier": "Config Modifier",
+  "gui.expatternprovider.config_modifier.change_mode": "Change Mode",
+  "gui.expatternprovider.config_modifier.data_input": "Input number here",
+  "gui.expatternprovider.config_modifier.mode.add": "Add",
+  "gui.expatternprovider.config_modifier.mode.div": "Divide",
+  "gui.expatternprovider.config_modifier.mode.max": "Maximize",
+  "gui.expatternprovider.config_modifier.mode.min": "Minimize",
+  "gui.expatternprovider.config_modifier.mode.mul": "Multiply",
+  "gui.expatternprovider.config_modifier.mode.rmv": "Clear",
+  "gui.expatternprovider.config_modifier.mode.set": "Set",
+  "gui.expatternprovider.config_modifier.mode.sub": "Subtract",
   "gui.expatternprovider.crystal_assembler": "Crystal Assembler",
   "gui.expatternprovider.crystal_assembler.amount": "%s mb / %s mb",
   "gui.expatternprovider.crystal_assembler.tank_empty": "Empty",
@@ -146,14 +159,17 @@
   "gui.expatternprovider.set_output_sides.off": "Disabled",
   "gui.expatternprovider.set_output_sides.on": "Enabled",
   "gui.expatternprovider.set_output_sides.open": "Open Output Config",
+  "gui.expatternprovider.smart_annihilation_plane": "ME Smart Annihilation Plane",
   "gui.expatternprovider.tag_export_bus": "ME Tag Export Bus",
   "gui.expatternprovider.tag_storage_bus": "Tag Storage bus",
   "gui.expatternprovider.tag_storage_bus.blacklist": "Blacklist Filter",
+  "gui.expatternprovider.tag_storage_bus.blacklist.tooltip": "Input blacklist tags here",
   "gui.expatternprovider.tag_storage_bus.desc.01": "& = AND    | = OR",
   "gui.expatternprovider.tag_storage_bus.desc.02": "^ = XOR",
   "gui.expatternprovider.tag_storage_bus.desc.03": "() for priority    * for wildcard",
   "gui.expatternprovider.tag_storage_bus.tooltip": "Input tag here",
   "gui.expatternprovider.tag_storage_bus.whitelist": "Whitelist Filter",
+  "gui.expatternprovider.tag_storage_bus.whitelist.tooltip": "Input whitelist tags here",
   "gui.expatternprovider.tank_amount": "%s mb / %s mb",
   "gui.expatternprovider.tank_empty": "Empty",
   "gui.expatternprovider.threshold_export_bus": "ME Threshold Export Bus",
@@ -174,6 +190,7 @@
   "gui.wireless_connect.highlight.tooltip": "Highlight the remote Wireless Connector in world.",
   "gui.wireless_connect.power": "Power Usage: %s AE/t",
   "gui.wireless_connect.remote": "Position X: %s, Y: %s, Z: %s",
+  "gui.wireless_connect.remote_channel": "Position X: %s, Y: %s, Z: %s\nUsed Channel: %s",
   "gui.wireless_connect.status": "Status: %s",
   "gui.wireless_connect.status.no_power": "No Power",
   "gui.wireless_connect.status.no_power.desc": "This Wireless Connector needs more power.",
@@ -190,6 +207,7 @@
   "item.expatternprovider.concurrent_processor": "Concurrent Processor",
   "item.expatternprovider.concurrent_processor_press": "Inscriber Concurrent Press",
   "item.expatternprovider.concurrent_processor_print": "Printed Concurrent Circuit",
+  "item.expatternprovider.config_modifier": "Config Modifier",
   "item.expatternprovider.drive_upgrade": "Drive Upgrade",
   "item.expatternprovider.emc_interface_upgrade": "Transmutation Interface Upgrade",
   "item.expatternprovider.emc_io_bus_upgrade": "Transmutation Import/Export Bus Upgrade",
@@ -222,11 +240,14 @@
   "item.expatternprovider.precise_export_bus": "ME Precise Export Bus",
   "item.expatternprovider.precise_storage_bus": "ME Precise Storage Bus",
   "item.expatternprovider.quartz_blend": "Quartz Blend",
+  "item.expatternprovider.smart_annihilation_plane": "ME Smart Annihilation Plane",
   "item.expatternprovider.tag_export_bus": "ME Tag Export Bus",
   "item.expatternprovider.tag_storage_bus": "ME Tag Storage Bus",
   "item.expatternprovider.threshold_export_bus": "ME Threshold Export Bus",
   "item.expatternprovider.threshold_level_emitter": "ME Threshold Level Emitter",
   "item.expatternprovider.void_cell": "ME Void Cell",
+  "item.expatternprovider.wireless_advanced_tool": "ME Wireless Advanced Setup Kit",
+  "item.expatternprovider.wireless_connector_upgrade": "Wireless Connector Upgrade",
   "item.expatternprovider.wireless_ex_pat": "Wireless Extended Pattern Access Terminal",
   "item.expatternprovider.wireless_tool": "ME Wireless Setup Kit",
   "itemGroup.epp": "Extended AE2",
@@ -237,12 +258,22 @@
   "key.epp.category": "Extended AE",
   "key.epp.viewpattern": "View Pattern",
   "key.expatternprovider.category": "Extended AE",
+  "key.expatternprovider.set_amount": "Set Amount",
   "key.expatternprovider.viewpattern": "View Pattern",
   "packaged_device.error.tooltip": "Invalid",
   "packaged_device.tooltip": "Device: %s",
   "pattern.tooltip": "Press [%s] to view pattern",
+  "tag_display.tooltip.fluids": "Contained fluid tags:",
+  "tag_display.tooltip.hint": "Hold shift to view its tags",
+  "tag_display.tooltip.items": "Item tags:",
+  "tag_display.tooltip.no_tags": "It has no tags",
   "void_warn.tooltip": "Need partitioning before using",
   "wireless.tooltip": "Bound to Connector at X: %s, Y: %s, Z: %s",
   "wireless.use.tooltip.01": "Click to bind",
-  "wireless.use.tooltip.02": "Click on another one to connect"
+  "wireless.use.tooltip.02": "Click on another one to connect",
+  "wireless_advanced.mode": "Current Mode: %s",
+  "wireless_advanced.mode.add": "§bAdd",
+  "wireless_advanced.mode.swapped": "Swapped Mode to: %s",
+  "wireless_advanced.mode.use": "§dUse",
+  "wireless_advanced.port_list": "Stored Connections (%s/%s):"
 }
\ No newline at end of file
diff --git a/LightMode/assets/expatternprovider/lang/zh_cn.json b/LightMode/assets/expatternprovider/lang/zh_cn.json
index 853e4495..71fbee9c 100644
--- a/LightMode/assets/expatternprovider/lang/zh_cn.json
+++ b/LightMode/assets/expatternprovider/lang/zh_cn.json
@@ -20,7 +20,7 @@
   "block.expatternprovider.entro_cluster_small": "小型恩特罗芽",
   "block.expatternprovider.ex_charger": "扩展充能器",
   "block.expatternprovider.ex_drive": "ME扩展驱动器",
-  "block.expatternprovider.ex_emc_interface": "ME扩展转化接口",
+  "block.expatternprovider.ex_emc_interface": "ME扩展嬗变接口",
   "block.expatternprovider.ex_inscriber": "扩展压印器",
   "block.expatternprovider.ex_interface": "ME扩展接口",
   "block.expatternprovider.ex_io_port": "ME扩展IO端口",
@@ -33,28 +33,29 @@
   "block.expatternprovider.oversize_interface": "ME超大接口",
   "block.expatternprovider.silicon_block": "硅块",
   "block.expatternprovider.wireless_connect": "ME无线连接器",
-  "block.expatternprovider.wireless_hub": "ME无线连接集线器",
-  "chat.ex_pattern_access_terminal.pos": "样板供应器现在突出显示在：%s，维度：%s",
+  "block.expatternprovider.wireless_hub": "ME无线集线器",
+  "chat.config_modifier.success": "成功修改%s的配置",
+  "chat.ex_pattern_access_terminal.pos": "样板供应器现在突出显示在：%s，维度：%s（%s个方块外）",
   "chat.pattern_view.error": "扩展AE不支持此样板，请在Github提交：%s",
-  "chat.wireless.highlight": "无线连接器现在突出显示在：%s，维度：%s",
+  "chat.wireless.highlight": "无线连接器现在突出显示在：%s，维度：%s (%s个方块外)",
   "chat.wireless_bind": "绑定到 X：%s，Y：%s，Z：%s",
   "chat.wireless_connect": "连接到 X：%s，Y：%s，Z：%s",
   "chat.wireless_connect.clear": "设置已清除",
   "chat.wireless_connect.cross_dimension": "必须处于同一维度",
   "chat.wireless_connect.missing": "目标已丢失",
-  "chat.wireless_connect.out_of_port": "无线集线器无可用端口",
+  "chat.wireless_connect.out_of_port": "该无线集线器没有可用端口",
   "chat.wireless_connect.out_of_range": "距离过远",
   "chat.wireless_connect.self_reference": "无法连接到自身",
   "config.jade.plugin_expatternprovider.jade_chamber": "ME水晶修复器",
-  "config.jade.plugin_expatternprovider.jade_wireless": "ME无线连接器 颜色",
+  "config.jade.plugin_expatternprovider.jade_wireless": "ME无线连接器颜色",
   "cutter.tooltip": "右击AE设备以重命名",
   "emi.expatternprovider.category.assembler": "水晶装配器",
   "emi.expatternprovider.category.cutter": "电路切片器",
   "emi.expatternprovider.category.fixer": "水晶修复器",
   "emi.expatternprovider.desc.entro_crystal": "恩特罗水晶由萌芽的恩特罗化福鲁伊克斯生长，就像赛特斯水晶的工作原理一样。要获得萌芽的恩特罗化福鲁伊克斯，您需要制作恩特罗种子并在福鲁伊克斯块上使用它。",
   "emi.expatternprovider.desc.entro_seed": "在放置于世界中的福鲁伊克斯块上使用恩特罗种子，会将该福鲁伊克斯块变成萌芽的恩特罗化福鲁伊克斯。",
-  "emi.expatternprovider.text.success_chance": "成功机会：%s",
-  "group.ex_emc_io_bus_part": "ME扩展转化输入/输出总线",
+  "emi.expatternprovider.text.success_chance": "成功率：%s",
+  "group.ex_emc_io_bus_part": "ME扩展嬗变输入/输出总线",
   "group.ex_io_bus_part": "ME扩展输入/输出总线",
   "gui.expatternprovider.active_formation_plane": "ME主动成型面板",
   "gui.expatternprovider.anvil.not_enough_xp": "经验不足",
@@ -67,32 +68,43 @@
   "gui.expatternprovider.caner.empty": "排空模式",
   "gui.expatternprovider.caner.fill": "填充模式",
   "gui.expatternprovider.circuit_cutter": "电路切片器",
+  "gui.expatternprovider.config_modifier": "配置修改器",
+  "gui.expatternprovider.config_modifier.change_mode": "更改模式",
+  "gui.expatternprovider.config_modifier.data_input": "在此输入数字",
+  "gui.expatternprovider.config_modifier.mode.add": "加",
+  "gui.expatternprovider.config_modifier.mode.div": "除",
+  "gui.expatternprovider.config_modifier.mode.max": "设为最大",
+  "gui.expatternprovider.config_modifier.mode.min": "设为最小",
+  "gui.expatternprovider.config_modifier.mode.mul": "乘",
+  "gui.expatternprovider.config_modifier.mode.rmv": "清除",
+  "gui.expatternprovider.config_modifier.mode.set": "设置",
+  "gui.expatternprovider.config_modifier.mode.sub": "减",
   "gui.expatternprovider.crystal_assembler": "水晶装配器",
   "gui.expatternprovider.crystal_assembler.amount": "%s mB / %s mB",
   "gui.expatternprovider.crystal_assembler.tank_empty": "空",
   "gui.expatternprovider.ex_crafting_terminal": "扩展合成终端",
   "gui.expatternprovider.ex_drive": "ME扩展驱动器",
-  "gui.expatternprovider.ex_emc_export_bus_part": "ME扩展转化输出总线",
-  "gui.expatternprovider.ex_emc_import_bus_part": "ME扩展转化输入总线",
-  "gui.expatternprovider.ex_emc_interface": "ME扩展转化接口",
+  "gui.expatternprovider.ex_emc_export_bus_part": "ME扩展嬗变输出总线",
+  "gui.expatternprovider.ex_emc_import_bus_part": "ME扩展嬗变输入总线",
+  "gui.expatternprovider.ex_emc_interface": "ME扩展嬗变接口",
   "gui.expatternprovider.ex_export_bus_part": "ME扩展输出总线",
   "gui.expatternprovider.ex_import_bus_part": "ME扩展输入总线",
   "gui.expatternprovider.ex_inscriber": "扩展压印器",
-  "gui.expatternprovider.ex_inscriber.fourstackable": "数量限制 4",
-  "gui.expatternprovider.ex_inscriber.next": "下一个压印工作",
-  "gui.expatternprovider.ex_inscriber.number": "压印工作 %s",
-  "gui.expatternprovider.ex_inscriber.pre": "上一个压印工作",
-  "gui.expatternprovider.ex_inscriber.stackable": "数量限制 64",
-  "gui.expatternprovider.ex_inscriber.unstackable": "数量限制 1",
+  "gui.expatternprovider.ex_inscriber.fourstackable": "堆叠4个物品",
+  "gui.expatternprovider.ex_inscriber.next": "下一个压印任务",
+  "gui.expatternprovider.ex_inscriber.number": "压印任务%s",
+  "gui.expatternprovider.ex_inscriber.pre": "上一个压印任务",
+  "gui.expatternprovider.ex_inscriber.stackable": "堆叠64个物品",
+  "gui.expatternprovider.ex_inscriber.unstackable": "堆叠1个物品",
   "gui.expatternprovider.ex_interface": "ME扩展接口",
   "gui.expatternprovider.ex_interface.config": "配置界面 %s",
   "gui.expatternprovider.ex_interface.next": "下一页",
   "gui.expatternprovider.ex_interface.pre": "上一页",
   "gui.expatternprovider.ex_io_port": "ME扩展IO端口",
   "gui.expatternprovider.ex_molecular_assembler": "扩展分子装配室",
-  "gui.expatternprovider.ex_molecular_assembler.next": "下一个合成工作",
-  "gui.expatternprovider.ex_molecular_assembler.number": "合成工作 %s",
-  "gui.expatternprovider.ex_molecular_assembler.pre": "上一个合成工作",
+  "gui.expatternprovider.ex_molecular_assembler.next": "下一个合成任务",
+  "gui.expatternprovider.ex_molecular_assembler.number": "合成任务%s",
+  "gui.expatternprovider.ex_molecular_assembler.pre": "上一个合成任务",
   "gui.expatternprovider.ex_pattern_access_terminal": "ME扩展样板管理终端",
   "gui.expatternprovider.ex_pattern_access_terminal.search_mode": "更改搜索模式",
   "gui.expatternprovider.ex_pattern_access_terminal.search_mode.01": "当前：输出",
@@ -119,10 +131,10 @@
   "gui.expatternprovider.pattern_modifier.clear.desc": "清除所有样板内容，将其变成空白样板",
   "gui.expatternprovider.pattern_modifier.clone": "复制模式",
   "gui.expatternprovider.pattern_modifier.clone.desc": "复制目标样板",
-  "gui.expatternprovider.pattern_modifier.disable": "关闭",
-  "gui.expatternprovider.pattern_modifier.div.desc": "将输入和输出量除以 %s",
-  "gui.expatternprovider.pattern_modifier.enable": "开启",
-  "gui.expatternprovider.pattern_modifier.multi.desc": "将输入和输出量乘以 %s",
+  "gui.expatternprovider.pattern_modifier.disable": "禁用",
+  "gui.expatternprovider.pattern_modifier.div.desc": "将输入和输出量除以%s",
+  "gui.expatternprovider.pattern_modifier.enable": "启用",
+  "gui.expatternprovider.pattern_modifier.multi.desc": "将输入和输出量乘以%s",
   "gui.expatternprovider.pattern_modifier.multiply": "乘数模式",
   "gui.expatternprovider.pattern_modifier.pattern_mode": "属性模式",
   "gui.expatternprovider.pattern_modifier.pattern_mode.fluid_substitute": "流体替换模式",
@@ -147,14 +159,17 @@
   "gui.expatternprovider.set_output_sides.off": "已禁用",
   "gui.expatternprovider.set_output_sides.on": "已启用",
   "gui.expatternprovider.set_output_sides.open": "打开输出配置",
+  "gui.expatternprovider.smart_annihilation_plane": "ME智能破坏面板",
   "gui.expatternprovider.tag_export_bus": "ME标签输出总线",
   "gui.expatternprovider.tag_storage_bus": "ME标签存储总线",
   "gui.expatternprovider.tag_storage_bus.blacklist": "黑名单过滤器",
+  "gui.expatternprovider.tag_storage_bus.blacklist.tooltip": "在此处输入黑名单标签",
   "gui.expatternprovider.tag_storage_bus.desc.01": "& = 逻辑与    | = 逻辑或",
   "gui.expatternprovider.tag_storage_bus.desc.02": "^ = 逻辑异或",
   "gui.expatternprovider.tag_storage_bus.desc.03": "() 表示优先  * 表示通配符",
   "gui.expatternprovider.tag_storage_bus.tooltip": "在此输入标签",
   "gui.expatternprovider.tag_storage_bus.whitelist": "白名单过滤器",
+  "gui.expatternprovider.tag_storage_bus.whitelist.tooltip": "在此处输入白名单标签",
   "gui.expatternprovider.tank_amount": "%s 毫桶 / %s 毫桶",
   "gui.expatternprovider.tank_empty": "空（储罐状态）",
   "gui.expatternprovider.threshold_export_bus": "ME阈值输出总线",
@@ -168,13 +183,14 @@
   "gui.expatternprovider.void_cell.mode.1": "模式：物质球",
   "gui.expatternprovider.void_cell.mode.2": "模式：奇点",
   "gui.expatternprovider.wireless_connect": "ME无线连接器",
-  "gui.expatternprovider.wireless_hub": "ME无线连接中枢",
+  "gui.expatternprovider.wireless_hub": "ME无线集线器",
   "gui.pattern_view.craft.fluid_substitute": "流体替换：%s",
   "gui.pattern_view.craft.substitute": "替换：%s",
   "gui.wireless_connect.channel": "频道：%s/%s",
   "gui.wireless_connect.highlight.tooltip": "在世界上突出显示无线连接器。",
-  "gui.wireless_connect.power": "能量使用：%s AE/t",
+  "gui.wireless_connect.power": "能耗：%s AE/t",
   "gui.wireless_connect.remote": "位置 X：%s，Y：%s，Z：%s",
+  "gui.wireless_connect.remote_channel": "位置 X：%s, Y：%s, Z：%s\n使用的频道：%s",
   "gui.wireless_connect.status": "状态：%s",
   "gui.wireless_connect.status.no_power": "无能量",
   "gui.wireless_connect.status.no_power.desc": "无线连接器需要更多的能量。",
@@ -191,18 +207,19 @@
   "item.expatternprovider.concurrent_processor": "并发处理器",
   "item.expatternprovider.concurrent_processor_press": "并发压印模板",
   "item.expatternprovider.concurrent_processor_print": "并发电路板",
+  "item.expatternprovider.config_modifier": "配置修改器",
   "item.expatternprovider.drive_upgrade": "驱动器升级",
-  "item.expatternprovider.emc_interface_upgrade": "转化接口升级",
-  "item.expatternprovider.emc_io_bus_upgrade": "转化输入/输出总线升级",
+  "item.expatternprovider.emc_interface_upgrade": "嬗变接口升级",
+  "item.expatternprovider.emc_io_bus_upgrade": "嬗变输入/输出总线升级",
   "item.expatternprovider.entro_crystal": "恩特罗水晶",
   "item.expatternprovider.entro_dust": "恩特罗粉",
   "item.expatternprovider.entro_ingot": "恩特罗注入锭",
   "item.expatternprovider.entro_seed": "恩特罗种子",
   "item.expatternprovider.entro_shard": "恩特罗碎片",
   "item.expatternprovider.ex_crafting_terminal": "ME扩展合成终端",
-  "item.expatternprovider.ex_emc_export_bus_part": "ME扩展转化输出总线",
-  "item.expatternprovider.ex_emc_import_bus_part": "ME扩展转化输入总线",
-  "item.expatternprovider.ex_emc_interface_part": "ME扩展转化接口",
+  "item.expatternprovider.ex_emc_export_bus_part": "ME扩展嬗变输出总线",
+  "item.expatternprovider.ex_emc_import_bus_part": "ME扩展嬗变输入总线",
+  "item.expatternprovider.ex_emc_interface_part": "ME扩展嬗变接口",
   "item.expatternprovider.ex_export_bus_part": "ME扩展输出总线",
   "item.expatternprovider.ex_import_bus_part": "ME扩展输入总线",
   "item.expatternprovider.ex_interface_part": "ME扩展接口",
@@ -223,11 +240,14 @@
   "item.expatternprovider.precise_export_bus": "ME精确输出总线",
   "item.expatternprovider.precise_storage_bus": "ME精确存储总线",
   "item.expatternprovider.quartz_blend": "石英混合物",
+  "item.expatternprovider.smart_annihilation_plane": "ME智能破坏面板",
   "item.expatternprovider.tag_export_bus": "ME标签输出总线",
   "item.expatternprovider.tag_storage_bus": "ME标签存储总线",
   "item.expatternprovider.threshold_export_bus": "ME阈值输出总线",
   "item.expatternprovider.threshold_level_emitter": "ME阈值发信器",
   "item.expatternprovider.void_cell": "ME虚空元件",
+  "item.expatternprovider.wireless_advanced_tool": "ME无线高级设置工具",
+  "item.expatternprovider.wireless_connector_upgrade": "无线连接器升级",
   "item.expatternprovider.wireless_ex_pat": "无线扩展样板管理终端",
   "item.expatternprovider.wireless_tool": "ME无线连接工具",
   "itemGroup.epp": "AE2扩展",
@@ -238,12 +258,22 @@
   "key.epp.category": "AE2扩展",
   "key.epp.viewpattern": "查看样板配置",
   "key.expatternprovider.category": "AE2扩展",
+  "key.expatternprovider.set_amount": "设置数量",
   "key.expatternprovider.viewpattern": "查看样板配置",
   "packaged_device.error.tooltip": "无效",
   "packaged_device.tooltip": "设备：%s",
   "pattern.tooltip": "按下[%s]查看样板",
+  "tag_display.tooltip.fluids": "所含流体标签：",
+  "tag_display.tooltip.hint": "按住Shift以查看标签",
+  "tag_display.tooltip.items": "物品标签：",
+  "tag_display.tooltip.no_tags": "无标签",
   "void_warn.tooltip": "使用前需要分区",
   "wireless.tooltip": "绑定到 X：%s、Y：%s、Z：%s 处的连接器",
   "wireless.use.tooltip.01": "右键绑定",
-  "wireless.use.tooltip.02": "右键另一个进行连接"
-}
+  "wireless.use.tooltip.02": "右键另一个进行连接",
+  "wireless_advanced.mode": "当前模式：%s",
+  "wireless_advanced.mode.add": "§b添加",
+  "wireless_advanced.mode.swapped": "已切换模式至：%s",
+  "wireless_advanced.mode.use": "§d使用",
+  "wireless_advanced.port_list": "已存储的连接 (%s/%s):"
+}
\ No newline at end of file
diff --git a/LightMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png b/LightMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png
new file mode 100644
index 00000000..f6eda67c
Binary files /dev/null and b/LightMode/assets/expatternprovider/textures/item/wireless_advanced_tool.png differ