postinst.in

#!/bin/bash
set -e

# Apply a sed expression using extended regular expressions in place to a
# file, if it exists.  The file is the first argument in order to work
# neatly with apply_conf_tweaks.
sed_conf()
{
  if [ -e "$1" ]; then
    sed -i -re "$2" "$1"
  fi
}

# Substitute a debconf answer into a configuration file with the syntax of
# /etc/default/grub.
merge_debconf_into_conf()
{
  local tmpfile; tmpfile="$1"
  local setting; setting="$2"
  local template; template="$3"

  db_get "$template"
  local value; value="$(echo "$RET" | sed -e 's,[$`"\],\\&,g')"
  if grep -q "^${setting}=" "$tmpfile"; then
    value="$(echo "$value" | sed -e 's,[\@],\\&,g')"
    sed -i -re "s@^(${setting}=).*@\1\"${value}\"@" "$tmpfile"
  else
    echo >> "$tmpfile"
    echo "${setting}=\"${value}\"" >> "$tmpfile"
  fi
}

# Apply the same configuration tweak to multiple files.
apply_conf_tweaks()
{
  local files; files="$1"
  local cmd; cmd="$2"
  local file
  shift 2

  for file in $files; do
    if [ -e "$file" ]; then
      "$cmd" "$file" "$@"
    fi
  done
}

get_wubi_device()
{
  if [ ! -x /usr/share/lupin-support/grub-mkimage ] || \
     ! /usr/share/lupin-support/grub-mkimage --test; then
    return 1
  fi

  local bootdev="$(grub-probe --target=device /boot)" || true
  local loop_file=
  case $bootdev in
    /dev/loop/*|/dev/loop[0-9])
      loop_file="$(losetup "$bootdev" | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/")"
      # If it's loop-mounted from another device, it isn't Wubi.
      case $loop_file in
        /dev/*) return 1 ;;
      esac
    ;;
    *) return 1 ;;
  esac

  echo "$bootdev"
}

# This only works on a Linux system with udev running.  This is probably the
# vast majority of systems where we need any of this, though, and we fall
# back reasonably gracefully if we don't have it.
cached_available_ids=
available_ids()
{
  local id path

  if [ "$cached_available_ids" ]; then
    echo "$cached_available_ids"
    return
  fi

  [ -d /dev/disk/by-id ] || return
  cached_available_ids="$(
    for path in /dev/disk/by-id/*; do
      [ -e "$path" ] || continue
      printf '%s %s\n' "$path" "$(readlink -f "$path")"
    done | sort -k2 -s -u | cut -d' ' -f1
  )"
  echo "$cached_available_ids"
}

# Returns non-zero and no output if no mapping can be found.
device_to_id()
{
  local id
  for id in $(available_ids); do
    if [ "$(readlink -f "$id")" = "$(readlink -f "$1")" ]; then
      echo "$id"
      return 0
    fi
  done
  # Fall back to the plain device name if there's no by-id link for it.
  if [ -e "$1" ]; then
    echo "$1"
    return 0
  fi
  return 1
}

devices_to_ids()
{
  local device id ids
  ids=
  for device; do
    id="$(device_to_id "$device" || true)"
    if [ "$id" ]; then
      ids="${ids:+$ids, }$id"
    fi
  done
  echo "$ids"
}

all_disks()
{
  local id
  for id in $(available_ids); do
    case $id in
      *-part*) ;;
      *) echo "$id" ;;
    esac
  done
}

all_partitions()
{
  local id ids
  ids=
  for id in $(available_ids); do
    if [ "$id" != "$1" ] && [ "${id%-part*}" = "$1" ]; then
      ids="${ids:+$ids }$id"
    fi
  done
  echo "$ids"
}

# In order to determine whether we accidentally ran grub-install without
# upgrade-from-grub-legacy on versions older than 1.98+20100617-1, we need
# to be able to scan a disk to determine whether GRUB 2 was installed in its
# boot sector.  This is specific to i386-pc (but that's the only platform
# where we need it).
scan_grub2()
{
  if ! dd if="$1" bs=512 count=1 2>/dev/null | grep -aq GRUB; then
    # No version of GRUB is installed.
    return 1
  fi

  # The GRUB boot sector always starts with a JMP instruction.
  initial_jmp="$(dd if="$1" bs=2 count=1 2>/dev/null | od -Ax -tx1 | \
                 head -n1 | cut -d' ' -f2,3)"
  [ "$initial_jmp" ] || return 1
  initial_jmp_opcode="${initial_jmp%% *}"
  [ "$initial_jmp_opcode" = eb ] || return 1
  initial_jmp_operand="${initial_jmp#* }"
  case $initial_jmp_operand in
    47|4b|4c|63)
      # I believe this covers all versions of GRUB 2 up to the package
      # version where we gained a more explicit mechanism.  GRUB Legacy
      # always had 48 here.
      return 0
    ;;
  esac

  return 1
}

# for Linux
sysfs_size()
{
  local num_sectors sector_size size
  # Try to find out the size without relying on a partitioning tool being
  # installed. This isn't too hard on Linux 2.6 with sysfs, but we have to
  # try a couple of variants on detection of the sector size.
  if [ -e "$1/size" ]; then
    num_sectors="$(cat "$1/size")"
    sector_size=512
    if [ -e "$1/queue/logical_block_size" ]; then
      sector_size="$(cat "$1/queue/logical_block_size")"
    elif [ -e "$1/queue/hw_sector_size" ]; then
      sector_size="$(cat "$1/queue/hw_sector_size")"
    fi
    size="$(expr "$num_sectors" \* "$sector_size" / 1000 / 1000)"
  fi
  [ "$size" ] || size='???'
  echo "$size"
}

# for kFreeBSD
camcontrol_size()
{
  local num_sectors sector_size size=

  if num_sectors="$(camcontrol readcap "$1" -q -s -N)"; then
    sector_size="$(camcontrol readcap "$1" -q -b)"
    size="$(expr "$num_sectors" \* "$sector_size" / 1000 / 1000)"
  fi

  [ "$size" ] || size='???'
  echo "$size"
}

# Returns value in $RET, like a debconf command.
describe_disk()
{
  local disk id base size
  disk="$1"
  id="$2"

  model=
  case $(uname -s) in
    Linux)
      if which udevadm >/dev/null 2>&1; then
        size="$(sysfs_size "/sys$(udevadm info -n "$disk" -q path)")"
      else
        base="${disk#/dev/}"
        base="$(printf %s "$base" | sed 's,/,!,g')"
        size="$(sysfs_size "/sys/block/$base")"
      fi

      if which udevadm >/dev/null 2>&1; then
        model="$(udevadm info -n "$disk" -q property | sed -n 's/^ID_MODEL=//p')"
        if [ -z "$model" ]; then
          model="$(udevadm info -n "$disk" -q property | sed -n 's/^DM_NAME=//p')"
          if [ -z "$model" ]; then
            model="$(udevadm info -n "$disk" -q property | sed -n 's/^MD_NAME=//p')"
            if [ -z "$model" ] && which dmsetup >/dev/null 2>&1; then
              model="$(dmsetup info -c --noheadings -o name "$disk" 2>/dev/null || true)"
            fi
          fi
        fi
      fi
    ;;
    GNU/kFreeBSD)
      disk_basename=$(basename "$disk")
      size="$(camcontrol_size "$disk_basename")"
      model="$(camcontrol inquiry "$disk_basename" | sed -ne "s/^pass0: <\([^>]*\)>.*/\1/p")"
    ;;
  esac

  [ "$model" ] || model='???'

  db_subst grub-pc/disk_description DEVICE "$disk"
  db_subst grub-pc/disk_description SIZE "$size"
  db_subst grub-pc/disk_description MODEL "$model"
  db_metaget grub-pc/disk_description description
}

# Returns value in $RET, like a debconf command.
describe_partition()
{
  local disk part id path diskbase partbase size
  disk="$1"
  part="$2"
  id="$3"
  path="$4"

  if which udevadm >/dev/null 2>&1; then
    size="$(sysfs_size "/sys$(udevadm info -n "$part" -q path)")"
  else
    diskbase="${disk#/dev/}"
    diskbase="$(printf %s "$diskbase" | sed 's,/,!,g')"
    partbase="${part#/dev/}"
    partbase="$(printf %s "$partbase" | sed 's,/,!,g')"
    size="$(sysfs_size "/sys/block/$diskbase/$partbase")"
  fi

  db_subst grub-pc/partition_description DEVICE "$part"
  db_subst grub-pc/partition_description SIZE "$size"
  db_subst grub-pc/partition_description PATH "$path"
  db_metaget grub-pc/partition_description description
}

usable_partitions()
{
  local last_partition path partition partition_id

  last_partition=
  for path in / /boot /boot/grub; do
    partition="$(grub-probe -t device "$path" || true)"
    if [ -z "$partition" ] || [ "$partition" = "$last_partition" ]; then
      continue
    fi
    partition_id="$(device_to_id "$partition" || true)"
    echo "$path:$partition_id"
    last_partition="$partition"
  done | sort -t: -k2
}

get_mountpoint()
{
  local relpath boot_mountpoint

  relpath="$(grub-mkrelpath "$1")"
  boot_mountpoint="${1#$relpath}"
  echo "${boot_mountpoint:-/}"
}

config_item()
{
  for x in /etc/default/grub /etc/default/grub.d/*.cfg; do
    if [ -e "$x" ]; then
      . "$x"
    fi
  done
  if [ "$(eval echo "\${$1+set}")" = set ]; then
    eval echo "\$$1"
  else
    return
  fi
}

running_in_container()
{
  type systemd-detect-virt >/dev/null 2>&1 && systemd-detect-virt --quiet --container
}

no_nvram_arg() {
    db_get grub2/update_nvram
    if [ "$RET" = false ]; then
        echo "--no-nvram"
    fi
}

run_grub_install()
{
    if ! grub-install $@ ; then
        echo "Failed: grub-install $@" >&2
        echo "WARNING: Bootloader is not properly installed, system may not be bootable" >&2
    fi
}

case "$1" in
  configure)
    . /usr/share/debconf/confmodule

    devicemap_regenerated=

    if [ @PACKAGE@ = "grub-efi-amd64" ] && dpkg --compare-versions "$2" lt-nl 2.02-2ubuntu11; then
      /usr/share/grub/grub-check-signatures
    fi

    if egrep -q '^[[:space:]]*post(inst|rm)_hook[[:space:]]*=[[:space:]]*(/sbin/|/usr/sbin/)?update-grub' /etc/kernel-img.conf 2>/dev/null; then
      echo 'Removing update-grub hooks from /etc/kernel-img.conf in favour of' >&2
      echo '/etc/kernel/ hooks.' >&2
      sed -ri /etc/kernel-img.conf -e '\%^[[:space:]]*post(inst|rm)_hook[[:space:]]*=[[:space:]]*(/sbin/|/usr/sbin/)?update-grub%d'
    fi

    case @PACKAGE@ in
      grub-pc)
        mkdir -p /boot/grub

        if test -e /boot/grub/device.map && ! test -e /boot/grub/core.img && \
           ! test -e /boot/grub/@FIRST_CPU_PLATFORM@/core.img; then
          # Looks like your device.map was generated by GRUB Legacy, which
          # used to generate broken device.map (see #422851).  Avoid the risk
          # by regenerating it.
          grub-mkdevicemap --no-floppy
          devicemap_regenerated=1
        fi
      ;;
    esac

    if test -z "$devicemap_regenerated" && test -s /boot/grub/device.map && \
       dpkg --compare-versions "$2" lt-nl 1.98+20100702-1 && \
       test "$(uname -s)" = Linux; then
      # Earlier versions of GRUB used unstable device names in device.map,
      # which caused a variety of problems.  There is some risk associated with
      # regenerating it (so we prompt the user if it's non-trivial), but on the
      # whole it's less risky to move to /dev/disk/by-id/.
      devicemap_lines="$(egrep -v '^[[:space:]]+#' /boot/grub/device.map | wc -l)"
      grub-mkdevicemap --no-floppy
      devicemap_regenerated=1
      if test "$devicemap_lines" != 1; then
        db_input critical grub2/device_map_regenerated || true
        db_go || true
      fi
    fi

    if test -z "$devicemap_regenerated" && \
       dpkg --compare-versions "$2" lt-nl 1.99~20101210-2 && \
       grep -qs /md-uuid- /boot/grub/device.map; then
      echo "Removing MD devices from device.map, since the BIOS cannot read from these." >&2
      sed -i '/\/md-uuid-/d' /boot/grub/device.map
    fi

    tmp_default_grub="$(mktemp -t grub.XXXXXXXXXX)"
    trap "rm -f ${tmp_default_grub}" EXIT
    cp -p /usr/share/grub/default/grub ${tmp_default_grub}

    # Apply configuration from debconf to both the template configuration
    # file (so that any ucf conflict resolution is shown with the configured
    # values in place) and to /etc/default/grub (in order that debconf
    # changes are effective even if we have to use UCF_FORCE_CONFFOLD=1).
    #
    # The config script takes care to read current values from
    # /etc/default/grub before possibly prompting the user to change them,
    # so this should comply with policy's strictures on configuration file
    # handling: the debconf prompts constitute an explicit administrator
    # request to change the configuration file.
    #
    # If the administrator changes their answers to any of these debconf
    # questions in the same run as a change to the template, then they'll
    # get a spurious ucf conflict.  To fix this, we'd need to keep track of
    # the old answers, substitute the old answers into $tmp_default_grub,
    # and substitute the new answers into /etc/default/grub.  Fortunately,
    # debconf won't normally ask these questions again during an upgrade, so
    # this should be rare in practice.

    conf_files="$tmp_default_grub /etc/default/grub"

    apply_conf_tweaks "$conf_files" merge_debconf_into_conf GRUB_CMDLINE_LINUX grub2/linux_cmdline
    apply_conf_tweaks "$conf_files" merge_debconf_into_conf GRUB_CMDLINE_LINUX_DEFAULT grub2/linux_cmdline_default

    case @PACKAGE@ in
      grub-pc)
        apply_conf_tweaks "$conf_files" merge_debconf_into_conf GRUB_TIMEOUT grub-pc/timeout
        apply_conf_tweaks "$conf_files" sed_conf 's/^(GRUB_TIMEOUT=)"([0-9][0-9]*)"/\1\2/'
        db_get grub-pc/hidden_timeout
        if [ "$RET" = false ]; then
          apply_conf_tweaks "$conf_files" sed_conf 's/^GRUB_HIDDEN_TIMEOUT=/#&/'
        fi
      ;;
      grub-ieee1275)
        if grep ^platform /proc/cpuinfo | grep -q PowerNV; then
		cat <<-EOF >>"$tmp_default_grub"

		# Disable os-prober for ppc64el on the PowerNV platform (for Petitboot)
		GRUB_DISABLE_OS_PROBER=true
		EOF
        fi
        ;;
    esac

    # If the template configuration file hasn't changed, then no conflict is
    # possible.  ucf can't figure this out for itself since we apply
    # debconf-based customisations on top of the template configuration
    # file.
    if [ -e /var/lib/grub/ucf/grub.previous ] && \
       cmp -s /usr/share/grub/default/grub /var/lib/grub/ucf/grub.previous && \
       [ -e /etc/default/grub ]; then
      ucf_env=UCF_FORCE_CONFFOLD=1
    else
      ucf_env=
    fi

    env $ucf_env ucf --three-way --debconf-ok --sum-file=/usr/share/grub/default/grub.md5sum "$tmp_default_grub" /etc/default/grub
    cp -a /usr/share/grub/default/grub /var/lib/grub/ucf/grub.previous
    package="$(ucfq --with-colons /etc/default/grub | cut -d : -f 2)"
    if echo $package | grep -q "^grub-" ; then
      ucfr --force @PACKAGE@ /etc/default/grub
    else
      ucfr @PACKAGE@ /etc/default/grub
    fi

    case @PACKAGE@ in
      grub-pc)

        fix_mixed_system=
        if test -e /boot/grub/stage2 && test -e /boot/grub/menu.lst && \
           ! test -e /boot/grub/grub2-installed && \
           test -z "$UPGRADE_FROM_GRUB_LEGACY"; then
          # Unfortunately, it's still possible that the user upgraded fully
          # to GRUB 2 in some way other than running
          # upgrade-from-grub-legacy; perhaps they ran grub-install by hand
          # for some reason.  It's really quite difficult to detect this
          # situation, because the only difference between this and a
          # working chainloaded setup is that in this case grub-setup has
          # been run.  So, to try to tell the difference, we scan the boot
          # sectors of all disks for a GRUB 2 boot sector.  Hopefully this
          # won't cause too much to explode, since I can't think of a better
          # method.
          grub2_disks=
          for disk in $(all_disks); do
            if scan_grub2 "$disk"; then
              grub2_disks="${grub2_disks:+$grub2_disks }$(readlink -f "$disk")"
            fi
          done
          if [ "$grub2_disks" ]; then
            # No || true here; it's vital that the user sees this, and it's
            # better to throw an error than to do the wrong thing.
            db_subst grub-pc/mixed_legacy_and_grub2 DISKS "$grub2_disks"
            db_fset grub-pc/mixed_legacy_and_grub2 seen false
            db_input critical grub-pc/mixed_legacy_and_grub2
            db_go
            db_get grub-pc/mixed_legacy_and_grub2
            if [ "$RET" = true ]; then
              db_reset grub-pc/install_devices
              UPGRADE_FROM_GRUB_LEGACY=1
              fix_mixed_system=1
              # Fall through to normal installation logic.
            fi
          fi
        fi

        # Make sure that Wubi users never see confusing device prompts.
        # Wubi is a very specialised hack that does complicated things with
        # grub-install diversions to create an image that's chained from the
        # Windows boot loader to boot an operating system from a file on a
        # Windows file system.  In these circumstances, prompting for where
        # to install GRUB is not going to help anyone.
        wubi_device="$(get_wubi_device)" || true
        if [ "$wubi_device" ]; then
          db_set grub-pc/install_devices "$wubi_device"
          db_fset grub-pc/install_devices seen true
        fi

        if test -e /boot/grub/stage2 && test -e /boot/grub/menu.lst && \
           ! test -e /boot/grub/grub2-installed && \
           test -z "$UPGRADE_FROM_GRUB_LEGACY"; then
          db_get grub-pc/chainload_from_menu.lst
          if $RET ; then
            # Create core.img (but do not risk writing to MBR).
            # Using grub-probe instead of "(hd0)" avoids (UUID=) hack slowness
            # in case /boot/grub is not on (hd0) in device.map.
            echo "Generating core.img" >&2
            grub-install --target=i386-pc --no-floppy --grub-setup=/bin/true "$(grub-probe -t drive /boot/grub)" > /dev/null

            # Update menu.lst to reflect that:
            # - core.img is present now
            # - core.img has to be the first option
            echo "Saving menu.lst backup in /boot/grub/menu.lst_backup_by_grub2_postinst" >&2
            cp /boot/grub/menu.lst{,_backup_by_grub2_postinst}
            echo "Running update-grub Legacy to hook our core.img in it" >&2
            LET_US_TRY_GRUB_2=true /usr/lib/grub-legacy/update-grub 2>&1 | sed -e "s/^/    /g" >&2
            # We just hooked GRUB 2 in menu.lst; then also generate grub.cfg.
            touch /boot/grub/grub.cfg
          fi
        elif running_in_container; then
          # Skip grub-install in containers.
          :
        elif test -z "$2" || test -e /boot/grub/core.img || \
             test -e /boot/grub/@FIRST_CPU_PLATFORM@/core.img || \
             test "$UPGRADE_FROM_GRUB_LEGACY" || test "$wubi_device"; then
          question=grub-pc/install_devices
          priority=high
          device_map="$(grub-mkdevicemap -m - | grep -v '^(fd[0-9]\+)' || true)"
          devices="$(echo "$device_map" | cut -f2)"
          if dpkg --compare-versions "$2" lt 1.98+20100702-1 && \
             test "$(uname -s)" = Linux && [ -z "$wubi_device" ]; then
            # Migrate to new by-id naming scheme.
            db_get grub-pc/install_devices
            old_devices="$(echo "$RET" | sed 's/, / /g')"
            new_devices=
            # Common-case optimisation: if the list of devices is
            # identical to the LHS of grub-mkdevicemap's output, then
            # there's no point asking again; just install to all disks.
            # (This handles e.g. "(hd0)" with one disk.)
            if [ "$(echo "$device_map" | cut -f1 | sort)" = \
                 "$(echo "$old_devices" | xargs -n1 | sort)" ]; then
              new_devices="$(devices_to_ids $devices)"
              db_set grub-pc/install_devices "$new_devices"
            # Alternatively, we might be installing to a single partition
            # on a single disk, and we can deal with that too if there's
            # only one available disk and it has an appropriate partition.
            # This doesn't necessarily work for multiple disks because now
            # the order matters.
            elif [ "$(echo "$device_map" | wc -l)" = 1 ] && \
                 [ "$(echo "$old_devices" | wc -w)" = 1 ] && \
                 echo "$old_devices" | grep -q ,; then
              old_device="${old_devices#(}"
              old_device="${old_device%)}"
              old_disk="${old_device%,*}"
              old_partition="${old_device##*,}"
              new_device="$(echo "$device_map" | grep "^($old_disk)" | \
                            cut -f2)"
              new_device="$(device_to_id $new_device)"
              if [ "$new_device" ]; then
                new_device="$new_device-part$old_partition"
                # Run through device_to_id again to check for existence.
                new_device="$(device_to_id $new_device)"
              fi
              if [ "$new_device" ]; then
                new_devices="$new_device"
                db_set grub-pc/install_devices "$new_device"
              fi
            fi
            if [ -z "$new_devices" ]; then
              new_devices="$(devices_to_ids $old_devices)"
              db_set grub-pc/install_devices "$new_devices"
              # Common-case optimisation: if all devices are translatable
              # to by-id and the number of devices there is the same as
              # the number of devices GRUB can see, then there's no point
              # asking again.  (This handles e.g. "/dev/sda" with one
              # disk.)
              old_devices_count="$(echo "$old_devices" | wc -w)"
              new_devices_count="$(echo "$new_devices" | wc -w)"
              devices_count="$(echo "$devices" | wc -w)"
              if [ "$old_devices_count" != "$new_devices_count" ] || \
                 [ "$new_devices_count" != "$devices_count" ]; then
                db_fset grub-pc/install_devices seen false
                db_fset grub-pc/install_devices_empty seen false
              fi
            fi
          else
            db_get grub-pc/install_devices
            valid=1
            for device in $RET; do
              if [ ! -e "${device%,}" ]; then
                valid=0
                break
              fi
            done
            if [ "$valid" = 0 ]; then
              question=grub-pc/install_devices_disks_changed
              priority=critical
              db_set "$question" "$RET"
              db_fset "$question" seen false
              db_fset grub-pc/install_devices_empty seen false
            fi
          fi

          while :; do
            ids=
            descriptions=
            partitions="$(usable_partitions)"
            for device in $devices; do
              disk_id="$(device_to_id "$device" || true)"
              if [ "$disk_id" ]; then
                ids="${ids:+$ids, }$disk_id"
                describe_disk "$(readlink -f "$device")" "$disk_id"
                RET="$(printf %s "$RET" | sed 's/,/\\,/g')"
                descriptions="${descriptions:+$descriptions, }$RET"
                for partition_pair in $partitions; do
                  partition_id="${partition_pair#*:}"
                  if [ "${partition_id#$disk_id-part}" != "$partition_id" ]; then
                    ids="${ids:+$ids, }$partition_id"
                    describe_partition "$(readlink -f "$device")" "$(readlink -f "$partition_id")" "$partition_id" "$(get_mountpoint "${partition_pair%%:*}")"
                    RET="$(printf %s "$RET" | sed 's/,/\\,/g')"
                    descriptions="${descriptions:+$descriptions, }$RET"
                  fi
                done
              fi
            done
            # Some "partitions" may in fact be at the disk level, e.g. RAID.
            # List these as well if they haven't already been listed.
            for partition_pair in $partitions; do
              partition_id="${partition_pair#*:}"
              if [ "${partition_id#*-part}" = "$partition_id" ]; then
                case ", $ids, " in
                  ", $partition_id, ") ;;
                  *)
                    ids="${ids:+$ids, }$partition_id"
                    describe_disk "$(readlink -f "$partition_id")" "$partition_id"
                    RET="$(printf %s "$RET" | sed 's/,/\\,/g')"
                    descriptions="${descriptions:+$descriptions, }$RET"
                    ;;
                esac
              fi
            done
            db_subst "$question" RAW_CHOICES "$ids"
            db_subst "$question" CHOICES "$descriptions"
            db_input "$priority" "$question" || true
            db_go
            db_get "$question"
            failed_devices=
            for i in `echo $RET | sed -e 's/, / /g'` ; do
              real_device="$(readlink -f "$i")"
              if grub-install --target=i386-pc --force --no-floppy $real_device ; then
                # We just installed GRUB 2; then also generate grub.cfg.
                touch /boot/grub/grub.cfg
              else
                failed_devices="$failed_devices $real_device"
              fi
            done

            if [ "$question" != grub-pc/install_devices ]; then
              db_set grub-pc/install_devices "$RET"
              db_fset grub-pc/install_devices seen true
            fi

            if [ "$failed_devices" ]; then
              if [ "$UPGRADE_FROM_GRUB_LEGACY" ]; then
                db_subst grub-pc/install_devices_failed_upgrade FAILED_DEVICES "$failed_devices"
                db_fset grub-pc/install_devices_failed_upgrade seen false
                if db_input critical grub-pc/install_devices_failed_upgrade; then
                  db_go
                  db_get grub-pc/install_devices_failed_upgrade
                  if [ "$RET" = true ]; then
                    db_fset "$question" seen false
                    db_fset grub-pc/install_devices_failed_upgrade seen false
                    continue
                  else
                    exit 1
                  fi
                else
                  exit 1 # noninteractive
                fi
              else
                db_subst grub-pc/install_devices_failed FAILED_DEVICES "$failed_devices"
                db_fset grub-pc/install_devices_failed seen false
                if db_input critical grub-pc/install_devices_failed; then
                  db_go
                  db_get grub-pc/install_devices_failed
                  if [ "$RET" = true ]; then
                    break
                  else
                    db_fset "$question" seen false
                    db_fset grub-pc/install_devices_failed seen false
                    continue
                  fi
                else
                  break # noninteractive
                fi
              fi
            fi

            db_get grub-pc/install_devices
            if [ -z "$RET" ]; then
              # Reset the seen flag if the current answer is false, since
              # otherwise we'll loop with no indication of why.
              db_get grub-pc/install_devices_empty
              if [ "$RET" = false ]; then
                db_fset grub-pc/install_devices_empty seen false
              fi
              if db_input critical grub-pc/install_devices_empty; then
                db_go
                db_get grub-pc/install_devices_empty
                if [ "$RET" = true ]; then
                  break
                else
                  db_fset "$question" seen false
                  db_fset grub-pc/install_devices_empty seen false
                fi
              else
                break # noninteractive
              fi
            else
              break
            fi
          done
        fi

        # /boot/grub/ has more chances of being accessible by GRUB
        for i in /usr/share/grub/unicode.pf2 ; do
          if test -e $i ; then
            mkdir -p /boot/grub
            cp $i /boot/grub/
          fi
        done

        if [ "$fix_mixed_system" ]; then
          # These never contain any valuable information, and they aren't
          # useful for boot any more, since we just overwrote MBR/PBR.
          rm -f /boot/grub/{{xfs,reiserfs,e2fs,fat,jfs,minix}_stage1_5,stage{1,2}}
          # Remove marker file used to indicate that grub-install was run
          # rather than upgrade-from-grub-legacy.  Since stage2 has been
          # removed, we don't need this any more.
          rm -f /boot/grub/grub2-installed
        fi
      ;;

      grub-efi-ia32|grub-efi-amd64|grub-efi-ia64|grub-efi-arm|grub-efi-arm64)
        bootloader_id="$(config_item GRUB_DISTRIBUTOR | tr A-Z a-z | \
                         cut -d' ' -f1)"
        case $bootloader_id in
          kubuntu) bootloader_id=ubuntu ;;
        esac

        if dpkg --compare-versions "$2" lt-nl 2.02-1~; then
          # Try to not break people upgrading by suddenly installing things
          # to /EFI/BOOT without knowing if it might break.
          db_get grub2/force_efi_extra_removable || true
          if [ "$RET" = false ]; then
            db_set grub2/no_efi_extra_removable true
            db_fset grub2/no_efi_extra_removable seen true
          fi
          db_reset grub2/force_efi_extra_removable || true
          if [ -e "/boot/efi/EFI/${bootloader_id}/fbx64.efi" ]; then
            rm -f "/boot/efi/EFI/${bootloader_id}/fbx64.efi";
          fi
        fi

        if [ "$bootloader_id" ] && [ -d "/boot/efi/EFI/$bootloader_id" ]; then
          case @PACKAGE@ in
            grub-efi-ia32)  target=i386-efi ;;
            grub-efi-amd64) target=x86_64-efi ;;
            grub-efi-ia64)  target=ia64-efi ;;
            grub-efi-arm)   target=arm-efi ;;
            grub-efi-arm64) target=arm64-efi ;;
          esac
          db_get grub2/no_efi_extra_removable
          if [ "$RET" = true ]; then
            NO_EXTRA_REMOVABLE="--no-extra-removable"
          fi
          NO_NVRAM="$(no_nvram_arg)"
          run_grub_install --target="$target" "$NO_EXTRA_REMOVABLE" "$NO_NVRAM"
        fi

        # /boot/grub/ has more chances of being accessible by GRUB
        for i in /usr/share/grub/unicode.pf2 ; do
          if test -e $i ; then
            mkdir -p /boot/grub
            cp $i /boot/grub/
          fi
        done

        if type update-secureboot-policy >/dev/null 2>&1; then
          update-secureboot-policy || true
        fi
      ;;

      grub-ieee1275)
        case $(dpkg --print-architecture) in
          ppc64el)
            # Output may be empty; if so, just update the core image but
            # don't install it to any PReP partition.
            prep_bootdev="$(/usr/lib/grub/powerpc-ieee1275/prep-bootdev)"
            NO_NVRAM="$(no_nvram_arg)"
            run_grub_install --target=powerpc-ieee1275 $prep_bootdev "$NO_NVRAM"
          ;;
        esac
      ;;

      grub-yeeloong)
        run_grub_install --target=mipsel-loongson
      ;;

      grub-xen)
        # Install for x86_64 regardless of arch, since a 32-bit userspace can still boot with a 64-bit kernel.
        mkdir -p /boot/xen
        run_grub_install --target=x86_64-xen
        case $(dpkg --print-architecture) in
          i386)
            run_grub_install --target=i386-xen
          ;;
        esac
      ;;
    esac

    # If grub.cfg has been generated, update it.
    if test -e /boot/grub/grub.cfg && ! running_in_container; then
      update-grub 3>&-
    fi
  ;;
  abort-upgrade|abort-remove|abort-deconfigure)
  ;;
  *)
    echo "postinst called with unknown argument \`$1'" >&2
    exit 1
  ;;
esac

# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.

#DEBHELPER#

exit 0